I generally use my shift at home or work on wifi. This week I'm on vacation and have been using Sprint's network primarily. I was using a CM7 nightly for a while and noticed that I've never seen the 3g icon, only 1x. I confirmed this by installing an app from the market called 'Opensignal' which shows details about your connection, which tower you're connected to, etc.
I flashed to a sense based ROM (Mik) and have the same issue- 1x only. However, it now always displays the 3g logo when data is 1x, even if roaming.
It seems that something in my phone is keeping me stuck without 3g that persists through reinstalls/wipes. I'm hoping there is some type of hidden setting or config option I can look at outside of the standard settings in the system.
Any ideas other than flashing back to stock/unrooted?
You will find that the stock sense rom will show 3G always as well. You can open up the dialer and dial ##33284# Choose EVDO engineering, and look at the state.
And if not in a sense rom *#*#info#*#* will let you view you connection details.
Toasted by Nightly.
Unfortunately I would ruu back to stock, update profile and prl in update section then see if that helps. Run speed tests and keep a record of results to help in the process of elimination. Could it just be the tower you're near or some Podunk town out in the sticks that doesn't have good equipment? Go to a sprint store with working displays. Do speed tests with the display then your phone. Maybe you got a lemon?
You could be roaming or on an old system. Turn roaming off and set network to sprint only and see if that makes any difference. I know years ago I went to my home town in the Midwest and throughput and signal was poor until I went into a major city (like the capital) then speed and signal was good again.
Thanks, I didn't realize HTC always made the 3g logo show- that's really stupid. *#*#info#*#* shows me good stuff and re-confirms me getting 1x only.
Will any of the settings listed attempt 3G data only? I set it to EVDO but it seemed to stay at 1x.
falz said:
Thanks, I didn't realize HTC always made the 3g logo show- that's really stupid. *#*#info#*#* shows me good stuff and re-confirms me getting 1x only.
Will any of the settings listed attempt 3G data only? I set it to EVDO but it seemed to stay at 1x.
Click to expand...
Click to collapse
##3282# & ##33284# are your best bet to edit anything if you're not planning on running an RUU, really you shouldn't have to, just turn EvDo only on and see if it even connects. Maybe the 1X towers are stronger than EvDo, if you have it at all.
Reset data profile entirely through ##3282# - you need your MSL - MSL Reader is on the market.
Try that and document your speed results, etc. Then update your prl. If you really want to, then go ahead and apply the 3G speed fix mentioned in Android Development (not necessary but if you're concerned with speed you might wanna try every step.)
If all that fails, you do still have the RUU and start fresh approach. Personally before I'd do anything I'd get ahold of another android device, maybe not HTC, and see what it's doing for speed, etc.
Sent from my PG06100
Great info. Using the info code I've set it to EVDO only but it still says its at 1xRTT, even after a reboot(!). My wife has a Sprint LG optimus S- I've looked at its settings and its connected @ 3G so I know whatever tower in my area should connect.
I got my MSL from that app and can get to edit mode via ##3282# but I do not see an option to reset, only to change to other profiles that appear to have the same config. It was choosing profile 1, I changed it to 0 with the same results.
How do I reset data profile?
Edit: ##33284# lists evdo as 0 (disabled) but does update info as to its signal strength and so on. This is all still with the phone set to EVDO only but yet connecting at 1xRTT.
I seem to have it working now. The change I made was ##3282#, EVDO, preferred mode = auto. This was previously set to CDMA. After a reboot I now have 3g.
I'm curious what this is set to for others? I've never been in these screens before and have this feeling that I've never had 3g data (I've had my phone since launch day).
Ive reflashed CM7 and 3g works there too now, i'm seeing the 3g icon for the first time.
Also its quite sneaky that HTC/Sprint only show the 3g icon on a Sense ROM. Had i never installed a non-sense based ROM i'd have never really known that i was stuck on 1x. Shame on HTC/Sprint.
falz said:
I seem to have it working now. The change I made was ##3282#, EVDO, preferred mode = auto. This was previously set to CDMA. After a reboot I now have 3g.
I'm curious what this is set to for others? I've never been in these screens before and have this feeling that I've never had 3g data (I've had my phone since launch day).
Ive reflashed CM7 and 3g works there too now, i'm seeing the 3g icon for the first time.
Also its quite sneaky that HTC/Sprint only show the 3g icon on a Sense ROM. Had i never installed a non-sense based ROM i'd have never really known that i was stuck on 1x. Shame on HTC/Sprint.
Click to expand...
Click to collapse
I would like to say this thread has helped me achieve EVDO (ive been 1x also since release). Sadly this doesn't work on AOSP roms for me, but i'm happy just getting what i'm paying for... and have been but haven't received. Its noticeably faster.
BUT.. for noobs not used to the ##3282# menu, after making a change, press the menu button and commit the change. I had gone through these steps changing the drop down and immediately restarting. Apparently you have to manually save these settings.. or at least on my phone.
where are you guys entering these numbers and "EVDO"? because mine is also showing 1x and i wanna fix that
AshyKnuttz said:
where are you guys entering these numbers and "EVDO"? because mine is also showing 1x and i wanna fix that
Click to expand...
Click to collapse
you get free thanks i guess... mouse slip up
anyway, its in your dialer, just use the keys as if the 'code' is a phone number
LOL double thanks
By the way i found out if you enable EVDO(DDTM) you might not receive some calls, just putting preferred mode on automatic will do the trick
falz said:
I seem to have it working now. The change I made was ##3282#, EVDO, preferred mode = auto. This was previously set to CDMA. After a reboot I now have 3g.
I'm curious what this is set to for others? I've never been in these screens before and have this feeling that I've never had 3g data (I've had my phone since launch day).
Ive reflashed CM7 and 3g works there too now, i'm seeing the 3g icon for the first time.
Also its quite sneaky that HTC/Sprint only show the 3g icon on a Sense ROM. Had i never installed a non-sense based ROM i'd have never really known that i was stuck on 1x. Shame on HTC/Sprint.
Click to expand...
Click to collapse
For the record the stock rom WILL show 1x. I've seen it. I guess that's when service is just plain terrible.
Sent from my PG06100 using XDA Premium App
I would like to fix this on my phone as well but I'm having some trouble entering the code. When I go to my dialer and enter ##3282# nothing happens. What am I missing? Thanks.
Sent from my PG06100 using XDA App
njeske said:
I would like to fix this on my phone as well but I'm having some trouble entering the code. When I go to my dialer and enter ##3282# nothing happens. What am I missing? Thanks.
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
The only rom it works for me on is MikShift. Not even on the stock rom, though I did call and voice my complaints to both Sprint AND HTC, they didn't give a rat's ass.
Sent from my PG06100 using XDA Premium App
If I install mikshift and make the change will it persist if I flash back to cm7?
Sent from my PG06100 using XDA App
njeske said:
If I install mikshift and make the change will it persist if I flash back to cm7?
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
It worked for me. I also updated my Profile and PRL through sprint just for the hell of it.
njeske said:
I would like to fix this on my phone as well but I'm having some trouble entering the code. When I go to my dialer and enter ##3282# nothing happens. What am I missing? Thanks.
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
1 Reboot your HTC EVO Shift 4G.
2 Press your phone icon on the screen.
3 Enter ##3282#.
4 You have to give it roughly 10 seconds for the EPST screen to appear.
5 If the 1st 3 steps don't work, you may have to restore to the Stock ROM.
alcohol120% said:
It worked for me. I also updated my Profile and PRL through sprint just for the hell of it.
Click to expand...
Click to collapse
Seem to have worked for me as well except on the next day...I got an (I believe unrelated) random wake-up reboot, it just decided to keep connecting in1x mode. Now I'm back to mik and I'm constantly in evdo rev a mode
I really like cm and I've had it fully setup to my liking...then when I discovered about opensignal and the whole 1x thing...I feel like I'm missing out on something. I think its more ocd than anything else since cm7 is fully functional anyway...but still. I do hope they figure out what the prob is. I can't wait to go back to cm
i dont need a signature
Related
I have crap service at my house, so after a phone call to Sprint they sent me an Airave for free and waived the monthly fee. Now as I understand the Airave is 1xRTT only, which is fine, whatever. But there is a slight EVDO signal that my Hero stupidly jumps on from time to time resulting in dropped calls and lost data connections because the EVDO signal fades in and out. Then it will go back full strength 1xRTT again. Rinse and repeat throughout the day.
I'm running Darchdroid 2.7. Is there a way to force 1xRTT?
Not without going back to a sprint based rom first. then you need your MSL. Call Sprint for that or Use alogcat. Calling sprint is easyer. AOSP roms don't have the ## sprint codes. ##DATA# is the one you need to force 1x only. Before you try all that try just keeping WIFI turned on at home. This should keep the phone from jumping off the Airave looking for 3G.
Hm, turning on Wifi didn't stop the signal from dropping to nothing from time to time like usual. Really don't like the Sprint based roms so I'm just going to live with it. Wish there was a way with AOSP roms though.
Flash a Sprint ROM, Change it, Then Flash back. It will stick. At least it did on my Moment. I put her (my wife) back on 3G when she went on a trip last month. She is back now and I have not swiched back but the problem seems to be gone. Weird I know.
Yes it does seem to stick. I'm kind of in a tough spot though. I need to force 1x at home for the reasons I said before, but I also use Pandora on my drive to work, so I need 3G then. So I guess I need to stick on a Sprint ROM so I can access the DATA menu regularly.
Thanks for the suggestions. Can anyone recommend the quickest Sprint based ROM? Even Fresh's ROM seems so laggy aince I've used darchdroid and darchstar's CM6 2.2.
I use the app AnyCut. I am able to create a link to CDMA Options > Mode of Operation. There you can select either Hybrid, EVDO or 1x. Using any cute you can easily access the right menu.
i dont have that option mode of operation
then again im using cm6
andrewjb said:
I use the app AnyCut. I am able to create a link to CDMA Options > Mode of Operation. There you can select either Hybrid, EVDO or 1x. Using any cute you can easily access the right menu.
Click to expand...
Click to collapse
This is just another reason I choose SenseUI over anything else.
The ##778 stuff, the different options available to control my phone, the widgets, the smoothness...
On cm6, I don't know that there is a way without modifying your phone's PST settings. QPST or something, if you can get in DIAG mode with cm6 (I'm assuming you can).
But then when you leave your house, you'll have to change it back (which is a huge process compared to the SenseUI way outlined by andrewjb)
Anyone else having issues with T-Mobiles network? I can't download anything, stopped getting FB stuff, Twitter doesn't work.
Working fine for me.
Where are you? Here in Northern Jersey I've got no problems...
Sent from my Nexus One using XDA App
Nevermind...I disabled the wireless networks and it started working again... wtf is up with that? First time that's happened. (running JL5)
I switch apns all the time. In quicksettings I use the apn switch but leave it on apn.droid instead of disabled (which actually DOES disable it) if I switch to apn.droid then it actually changes the way I connect to tmo... epc.tmobile.apndroid.com...(instead of epc.tmobile.com) I swear I get faster speeds.
Sent from my Llama powered N1 courtesy of the xda app! Llama Power!!
I'm not sure what's going on but for the last couple of days my data connection is acting all messed up. Sometimes it works sometimes it doesn't. I've tried different modems and different roms. Also for the first tine ever Odin hangs every time I try to flash a modem.
Sent from my SGH-T959 using XDA App
Working fine for me. Faster than ever. Hit a new all time high in a speed test today. So I think the problem is on your end.
This happens to me on jl5. Didn't happen on ji6. It will still have bars, just no data. I have to switch to airplane mode and then back to get it working again. Happens a couple times a day.
Sent from my SGH-T959 using XDA App
benifactor said:
This happens to me on jl5. Didn't happen on ji6. It will still have bars, just no data. I have to switch to airplane mode and then back to get it working again. Happens a couple times a day.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
That's odd. I've had JL5 since a few days after release and haven't had a single issue with data until today. I see full bars, data activity doesn't do anything except the green "out" arrow flashes but nothing comes in. I just disabled Data network and re-enabled it and now it's worked fine..
Please use proper language when making a thread. I modified the title of this thread because of it. Thanks.
I have similar happen on JL5, after a day or two (or an unknown set of actions). I will no longer be able to receive calls, but will get the VM alerts and be able to dial out. Data connection will then be hit/miss. I put the phone in airplane mode and take it off airplane mode and it works again.
presence06 said:
That's odd. I've had JL5 since a few days after release and haven't had a single issue with data until today. I see full bars, data activity doesn't do anything except the green "out" arrow flashes but nothing comes in. I just disabled Data network and re-enabled it and now it's worked fine..
Click to expand...
Click to collapse
Yeah,its a known froyo bug,it was even brought up several times in google's forum for the nexus one. it wasn't an issue in 2.1,but 2.2 (pretty much every build I've ever used on the G1,N1,vibrant,HD2,and Intercept) has the issue.
i think my phone's radio is broken.. now it doesnt switch between edge and 3G anymore.. stays on 3G
but download speed is really slow..painfully slow.. i was actually happy to get 3G in my room, but it's actually broken? LOL
i installed the signal app by imperial.. it stays on H - 93 dbm with the 3G symbol on the signal bar and consistent 3/4 bars.. what the hell..
hmmm..
maybe tmo 3g coverage has gotten better? but download speed is slow.. my phone may be broken.. ughhh
Check to see if you have it wcdma only. Settings->wireless networks->mobile network. It should be on wcdma/GSM (auto).
Sent from my SGH-T959 using XDA App
This also happens to me, I'm at JL5. Sometimes when using 3g my speed is lower than 100 kbps. I have to reconnect to make it work.
benifactor said:
Check to see if you have it wcdma only. Settings->wireless networks->mobile network. It should be on wcdma/GSM (auto).
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
it is on auto mode..
they dont switch anymore.. from what i have observed, it stuck on the 3G symbol, but the actual download speed does switch between edge and 3g.. someitmes rendering a page is faster and sometimes it's slow..
iynfynity said:
This also happens to me, I'm at JL5. Sometimes when using 3g my speed is lower than 100 kbps. I have to reconnect to make it work.
Click to expand...
Click to collapse
im using the stock j16.. i already reset my phone, even reverted to stock jfd and flash via kies last night.. same issue
i haven't even dropped my phone at all.. not a bad drop at least..
I have the same problem on JL5. I just flashed Nero V3 this weekend as my first Froyo rom and I see today I cannot get online at work where 3G is iffy. If i switch it manually to GSM, then data works.
I actually flashed a custom rom hoping to fix an issue like this.
Back on stock my network data just stopped while browsing web pages or anything really. It would give the outgoing arrows but nothing would come back. After about 30 minutes or so it would start working again for a while.
Flashed to nero but it's still as prevalent as ever (maybe for a different reason now lol). Not sure if it's the phone or Tmo's network anymore, but it's not too big of an issue for me so I just have to remember to activate wifi if I need constant data for any period.
I have it set to GSM only because I don't live in a 3G area...
OK I have searched in here and for the most part I am finding no helpful information because 90% of you have no desire to disable JUST 3g. The only ones that are concerned are people like myself who have 1 bar of 3g for the majority of the day, whereas edge is providing 3 bars. Its really hard on my battery (and annoying) for my phone to constanly look for 3g only to find 1 bar and maintain it for about 3 minutes, it then defaults to edge again until 5 minutes later it sees that 1 bar of 3g again. This is at my work which has lead lined walls ( I work in Radiology).
I would like to disable 3g and force edge throughout the day. I use wifi at work for data but want to be able to text without it eating up my battery. Can someone please find a way to edit a file in the operation system to allow this?
Just to let you know I have already tried all the widgets available including anycut and none of them are providing this function for me. anycut will give me what appears to be a toggle of "2g networks only" but it actually does nothing, nor does it stick when I exit the setting page. I also tried accessing the menu from the dial pad to force 2g only but the options never stick, nor am I interested in typing *#*#4636#*#* every morning when I get to work. Please help me find a simple solution. Thanks!
I did it only by enabling gsm only in *#*#4636#*#*
Worked for me...now im only on edge
Take the App "Any cut" an put a widget on the desk (UMTS options)
it works.
spline1 said:
Take the App "Any cut" an put a widget on the desk (UMTS options)
it works.
Click to expand...
Click to collapse
What am I doing wrong? Inhale used the 4636 method and it never ever changes from h+ to edge . After in change it is ther a special way ton"save" the settings? I back out or hit the home button....very frustrating it works for others but not for me
spline1 said:
Take the App "Any cut" an put a widget on the desk (UMTS options)
it works.
Click to expand...
Click to collapse
i did this, and i see the 2g box, checked it, and i still het the H+...wtf?
I dont know. I have H+ and test with "speedtest", i have(kbit 5300)and when I press anycut button (UMTS) I see "E" and have speed of 120 kbits.
when it takes 5-10 seconds to switch
you guys probably need to UNCHECK the option to select the operator automatically in settings, so it doesn't get overridden
franciscojavierleon said:
you guys probably need to UNCHECK the option to select the operator automatically in settings, so it doesn't get overridden
Click to expand...
Click to collapse
uder the UMTS options? there is no check box, only the optoion to automattily select operator.
dvigue said:
uder the UMTS options? there is no check box, only the optoion to automattily select operator.
Click to expand...
Click to collapse
Jepp, AT&T disable this option.
spline1 said:
Jepp, AT&T disable this option.
Click to expand...
Click to collapse
Went home to test the 3g theory, and i always get H+ when i put my phone in the kitchen window. one bar. today, EDGE all the time i was home with full signal. so the 2g Toggle DOES work i guess.....
I can not get the 2g toggle to work at all. Its also strange to me that I can't get any network settings to stick from the dial pad menu either. It seems as if those of us who can't get it to work have a read only network file or something. For those who got it to work, are you on att? What else can you tell us about your phones? What procedure did you go through exactly to get it to work?
I have an att Atrix that is rooted and running that custom Adeo rom from this forum.
I installed the abycut app. Placed bother gsm/umts settings pages from anycut onto one of my desktops, then tried both tick boxes on each to enable 2g only. This did not work. I also went into the extra settings from there and tried to manually set networks and what not and I am just not able to get edge to stick. I have toggled airplane mode after setting them, tried different combinations, and have rebooted the phone.
Has anyone with att got this to work?
Sent from my Atrix using XDA App
there is a way pls refer to my post
http://forum.xda-developers.com/showthread.php?p=12464330#post12464330
Not only is that extremely impractical, it flat out doesn't work. The settings won't stick.
Like I said im almost certain my carrier or network folder is read only or something.
Sent from my Atrix using XDA App
seh6183 said:
Not only is that extremely impractical, it flat out doesn't work. The settings won't stick.
Like I said im almost certain my carrier or network folder is read only or something.
Sent from my Atrix using XDA App
Click to expand...
Click to collapse
Use root explorer to switch your folders from ro-r/w
booty hater said:
Use root explorer to switch your folders from ro-r/w
Click to expand...
Click to collapse
Don't have root explorer and im at work, but I can try when I get home. Can anyone else test this in the meantime?
Sent from my Atrix using XDA App
It worked for me all day guys. i NEVER got h+ and same at home. my signal was perfect all day and my battery did better
all i did was i clicked the 2g box, then pressed HOME not back. then did the 4636 thing and seleced GSM ONLY and it stayed all day. i have not tested it after reboot, im sure ill have to do it again, but i am very happy with this....
i also after getting into the UMTS screen disabled "automatic" by searching my providers and selecting ATT. wanted to mention that too...
dvigue said:
It worked for me all day guys. i NEVER got h+ and same at home. my signal was perfect all day and my battery did better
all i did was i clicked the 2g box, then pressed HOME not back. then did the 4636 thing and seleced GSM ONLY and it stayed all day. i have not tested it after reboot, im sure ill have to do it again, but i am very happy with this....
i also after getting into the UMTS screen disabled "automatic" by searching my providers and selecting ATT. wanted to mention that too...
Click to expand...
Click to collapse
Was is the any cut app or the 4636 that did it? Can you play around with it and find out please?
Sent from my MB860 using XDA App
I'm going to blow my brains out.
I just tried 800 combinations of settings using anycut and the 4636 menu and NOTHING WORKS. I tried doing what the last poster said, I tried every setting and then toggled airplane mode, I went info 4636 and even toggled the radio to CDMA! Nothing would force edge. Nothing.
I will pay 1.5 million dollars for an app that toggles:
Off
GPRS only
EDGE only
3G Only
HSPA+ Only
Sent from my MB860 using XDA App
seh6183 said:
Was is the any cut app or the 4636 that did it? Can you play around with it and find out please?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
i did both. im telling you guys. it worked for me. all day yesterday...
dvigue said:
i did both. im telling you guys. it worked for me. all day yesterday...
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
I have a Rogers/Fido/Telus Nexus S. I tried a bunch of ROM's, CM7, ASOP, NSColab, Honycomb port. And then I realized that my 3G stopped working. I'm only getting Edge. My baseband version says "NO DGSXXXKB1", in the bootloader, carrier info says ATT. Any ideas?
do I need to re-flash the GRI40 radio again?
Same problem here. Initially all was working fine, then I tried to play with 2G/3G settings in Power Widget (CM7) since then, I am only able to get Edge connection.
I reset, changed firmwares, went back to my original Nandroid backup, no help.
I was also getting the Roaming Icon indicator on Fido's network, even though I purchased the Fido branded Nexus-S...
Tried changing Radio, KB1 and KB3, still no go.
I have owned Nexus One, Desire, Desire HD, Samsung Galaxy-S and Nexus-S
Never had issues except with Samsung phones!
Anyway, relocked NAND and this phone is going back.
Same. I was ASOP and the 2G was enable by default. I changed it to 3G and never saw 3G again. I thought swapping radios would do it, apparently not. Really weird. I guess I'm returning mine as well. Hopefully Future Shop will not snoop around too much.
Do you think odin would work?
nakadm said:
Same problem here. Initially all was working fine, then I tried to play with 2G/3G settings in Power Widget (CM7) since then, I am only able to get Edge connection.
I reset, changed firmwares, went back to my original Nandroid backup, no help.
I was also getting the Roaming Icon indicator on Fido's network, even though I purchased the Fido branded Nexus-S...
Tried changing Radio, KB1 and KB3, still no go.
I have owned Nexus One, Desire, Desire HD, Samsung Galaxy-S and Nexus-S
Never had issues except with Samsung phones!
Anyway, relocked NAND and this phone is going back.
Click to expand...
Click to collapse
The version of the phone changed to GRI40 which if I'm not mistaken is the T-mobile one. Which would explain everything. I hope one of the devs could help us out.
APN missing?
I have the same problem guys. After flashing CM7, I can only get edge connection. Whenever I turn on 3G from the toggle, a "H" sign will appear,but no internet at all! Wtf. Hope there is a solution for this. Back on stock nexus s (slcd i9023) for now
Sent from my Nexus S using XDA Premium App
Tony_M said:
APN missing?
Click to expand...
Click to collapse
Nope. It's there.
smoothfreeze said:
I have the same problem guys. After flashing CM7, I can only get edge connection. Whenever I turn on 3G from the toggle, a "H" sign will appear,but no internet at all! Wtf. Hope there is a solution for this. Back on stock nexus s (slcd i9023) for now
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Are you getting 3G on stock?
i.mac said:
Are you getting 3G on stock?
Click to expand...
Click to collapse
Yes. On 3G right now. I wonder whats the problem
Sent from my Nexus S using XDA Premium App
i just read somewhere else that after flashing the wcdma setting in *#*#4636#*#* got set to the wrong option. so type that and go change it back to wcdma preferred, or your preference.
nakadm said:
Same problem here. Initially all was working fine, then I tried to play with 2G/3G settings in Power Widget (CM7) since then, I am only able to get Edge connection.
I reset, changed firmwares, went back to my original Nandroid backup, no help.
I was also getting the Roaming Icon indicator on Fido's network, even though I purchased the Fido branded Nexus-S...
Tried changing Radio, KB1 and KB3, still no go.
I have owned Nexus One, Desire, Desire HD, Samsung Galaxy-S and Nexus-S
Never had issues except with Samsung phones!
Anyway, relocked NAND and this phone is going back.
Click to expand...
Click to collapse
Never hit the 2G/3G button. Its broken, been broken and doesnt work as of yet. Just dont hit it.
Had the same problem. For some reason it was on the wrong band (if that's possible). in the *#*#4636#*#*, phone information, menu, select radio-band, USA, and fixed!
Still getting no 3G/H on my CM7. I even tried the *#*#4636 method, still no go. However I can surf the browser to sites like google, facebook etc. But whenever I want to sync my google acc, I will get a network error. Wtf? One thing that I noticed is that, my signal bars won't "light up" (but I can surf the net). Another thing, after flashing to CM7, my build number changed to GRI40 instead of GRI54 in the settings on stock. Maybe that is the problem?
smoothfreeze said:
Still getting no 3G/H on my CM7. I even tried the *#*#4636 method, still no go. However I can surf the browser to sites like google, facebook etc. But whenever I want to sync my google acc, I will get a network error. Wtf? One thing that I noticed is that, my signal bars won't "light up" (but I can surf the net). Another thing, after flashing to CM7, my build number changed to GRI40 instead of GRI54 in the settings on stock. Maybe that is the problem?
Click to expand...
Click to collapse
I tried changing it to CDMA preferred and it changes itself back.
Sent from my Nexus S using Tapatalk
Put this into your dial pad: *#*#4636#*#*
Then hit Phone Information
Then hit the menu button and select radio band, the select corresponding Country.
USA will fix our issues.
I found a dirty workaround for this problem. Turn on airplane mode, then turn it off. Worked for me.
Same issue for me on the Nexus One. 3G icon is there when phone is idle. As soon as I try to do anything data-related (ie. browser) it switched to an H.
Tried setting to USA, no dice. APN is internet.com
crap I guess no root for my nexus S until this canadian carrier thing is resolved...
I thought i would throw in my experiance
I bought a Nexus S from Telus, and i am using it with a Sasktel Sim on Bell/Sasktel network (live in sask but have a national account from Bell) and on stock, i could never get H.....only the 3g would show up. But that was short lived because i flashed CM7 on it and the H now appears and works perfectly fine
So i dunno if its a Rogers frequency thing/problem, but the phone works great on HSPA on Bell/Sasktel
Cheers
Is there a way to force CyanogenMod (or even the stock rom) to stay at HSPA? My phone has issues going from 3G to HSPA and staying there (happens regardless of rom). Is there a way to make it stick on HSPA? I'm not too worried about the battery life, it's already pretty abysmal.
Thanks!
I don't know if there is. The reason it does that is to keep unnecessary bandwidth from being used by the phone. It's a quick switch.
Edit: there is the old method of dialing *#*#4636#*#* and selecting wcdma only, but I think it still switches between 3G/4G
There is no way, it's dependent on cellular carrier and not on the phone AFAIK.
The question is - why would you want to? What are the "issues" you're seeing?
Jack_R1 said:
There is no way, it's dependent on cellular carrier and not on the phone AFAIK.
The question is - why would you want to? What are the "issues" you're seeing?
Click to expand...
Click to collapse
my phone is refusing to go up to 4g (HSPA) in a reasonable amount of time. It takes on average 45-60 seconds for it to move up. It's done that no matter which rom I use and it's annoying as pages won't load until it goes to HSPA
Bad. OK, as a very harsh and bad semi-solution you could run a ping once in 5 sec, that would keep your phone's data connection constantly active. But it's no good solution.
Have you tried flashing a different radio? You never know...
illru said:
Have you tried flashing a different radio? You never know...
Click to expand...
Click to collapse
That's more a reception thing...
Sent from my Nexus 4 using xda app-developers app
I have the same question, but my my touch 4g stays in E and doesnt want to go to H, we send it to htc service for power button replacement, it came like that from htc, now another issue can not hear anything but myself. strange, should I send it back? its been like 4 months.
I am on straight talk and my other phone runs on H with the same sim card
Gizmo07 said:
I have the same question, but my my touch 4g stays in E and doesnt want to go to H, we send it to htc service for power button replacement, it came like that from htc, now another issue can not hear anything but myself. strange, should I send it back? its been like 4 months.
I am on straight talk and my other phone runs on H with the same sim card
Click to expand...
Click to collapse
Just for kicks, make sure it's not set to 2G-only mode in the system settings... You never know!
For some reason I cant find it in the settings, any idea where to look for it? I just downgraded to 2.21
Gizmo07 said:
For some reason I cant find it in the settings, any idea where to look for it? I just downgraded to 2.21
Click to expand...
Click to collapse
Refer to my above post. It's in a hidden menu accessible from the dialer.
Sent from my HTC Glacier using xda app-developers app
matada said:
Is there a way to force CyanogenMod (or even the stock rom) to stay at HSPA? My phone has issues going from 3G to HSPA and staying there (happens regardless of rom). Is there a way to make it stick on HSPA? I'm not too worried about the battery life, it's already pretty abysmal.
Thanks!
Click to expand...
Click to collapse
I did the *#*#4636#*#* and switched to wcdma only and it seems to make the transition quicker maybe 2 seconds instead of 25 and I'm on the nexus 4