T-Mobile MDA USA weird, "fixies" dont work, stuck in "press send to restore"
Hi, sorry for my poor English is not my first language
I have a T-Mobile MDA USA and happened a weird thing, my phone works properly, was CID unloked and sim unloked with TNT_5.0_Wizard_TouchFLO ROM but 3 days ago I put the USB (PC)to charge the battery, lately when I back to pickup my phone I see in the screen of the phone open and close or put an quit windows explorer(mobil) repetitively, i try to close manually tapping in the "X" but explorer continues opening, then I see in the bar where you put the web address the number "3" and "8" was typing continuously, like when you hold pressing the buttons, but nothing was pressing or making pressure to do that, since I cant close the explorer with the "X" I turn off the phone, when I turn on instead to load normally, appears the Align Screen and for some reason will not recognize the Screen Tapping to align the screen, so, I turn off/on again, but in this time shows a black screen with "Press Send to Restore Factory Defaults, Other Key to Quit" in withe letters, it is stuck in there since, before to put this tread I have read this forum and still I am lost, because i do a Soft Reset or Hard Reset #1,#2,#3, I enter into a bootloader mode to re-flash the ROM with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ... IPL/SPL 1.01 and when finish to flash, its suppose the phone restart and windows loading but instead that I get again the same black screen with "Press Send to Restore Factory Defaults, Other Key to Quit" in withe letters, ok, maybe with other recently ROM, then I enter into a bootloader mode to re-flash the ROM... AGAIN... but now with ruu_prodigy_226102_22610105_022511_tmous_wwe_ship... IPL/SPL 2.26 ... and AGAIN I get the same black screen with "Press Send to Restore"... I try to press send key always, but nothing happens, is still stuck there always, I could not get past that, I would really appreciate any help. Thank you so much.
I hate to ask this, at the risk of sounding too obvious, but are you sure that it was CID unlocked properly? I have a Cingular 8125 with IPL/SPL 2.25 and I know it was a hell of an effort to get it CID unlocked, five or six tries before it worked properly and I was able to flash successfully.
l33tphreak said:
I hate to ask this, at the risk of sounding too obvious, but are you sure that it was CID unlocked properly? I have a Cingular 8125 with IPL/SPL 2.25 and I know it was a hell of an effort to get it CID unlocked, five or six tries before it worked properly and I was able to flash successfully.
Click to expand...
Click to collapse
yes was CID unlocked properly, I do it with lokiwiz02b like 3 moths ago and I use Wizard Service Tool to see was really unlocked, I could flash any ROM since was unlocked I could use crosbow,faria, Molski even TNT.20273_Professional ROM's but I prefer use TNT_5.0_Wizard_TouchFLO because I feel my phone works more stable and speedy... searching in treads I see Im not the only one with the same problem (stuck in a black screen with the legend " Press Send to restore factory default, other keys to quit" in white letters) but in that treads no one get answer how fix this problem or how get out of the black screen.
like I say before I could put my phone in bootloader mode and re.flash the ROM wherever I want to try running ROMUpdateUtility and always I reach 100% then, when its suppose the phone restart and you will see the windows logo or T-mobile, don't happen that, instead I see the famous black screen with white legend, so the legend says me "press send"... I press send, or any key and nothing happens... I read in other treads when you press send the phone formating but this is not the case, just don't do nothing,.... realy I need some help here
thanks
Hey!
I have the same problem as described above. I've been using CR96 Touch HD WM 6.1 with soft SPL unlock for couple of months with no problems until tonight when I noticed that my phone is hanged. I did a soft reset, but the phone gets stucked at "press send to restore factory default, other keys to quit" screen. At that none of the buttons work, soft resetting just puts it back to this screen, the same goes for taking the battery out. There have been no software or registry changes within weeks - just using basic phone functions. Is there any way how to fix this or what could be the problem?
Thanks in advance
Hi Guys!
I have a Feeler. Flashed it with WM6.1 for Typhoon/Feeler/Amadeus [1.5]
It worked well for 2 - 3 weeks. Then the device hung. Now, i cannot access the device. When it reboots, it stops at the sceen showing "Mobile Operator" It does not want to hard reset......
Help?
Okay....
I got something happening. When i rebot, i pressed 1 clean Hive, now it booted back up.........
Wonder why this happened?
Any ideas guys?
pressing 1 on the startup screen is used to hardreset your phone... If you tried the old way (pressing the combination of key) will no longer work and you will freeze your phone..
So remember each time you press 1 on this screen you are doing a "hard reset"
Hi,
sorry for my bad English.
so i have HD2 with HSPL and 2.10 radio installed (i didi it half year ago), i've been using Android and Stock WM (1.48). It was launching by Dula boot program on start. Two days ago my battery discharged (first time since I installed android) I plugged it in and charged a little bit then I turned it on and it stucked on HTC screen (white screen with Htc logo and radio and rom version on the bottom) I performed a soft reset few times and once it loaded to the PIN menu, but sreen wasn't responding so I made soft reset one more time, it loaded PIN menu again, I clicked my PIN then I chose to boot Android and it stucked on booting. Then I performed a Hard reset but it didn't help.
If it matters, I have still access to the bootloader.
Please help me. Thank You in advance.
Wegeta
Hi All,
My son dropped the phone and broke the lcd screen, I buy one on ebay and change it but now the phone has the htc screen and resets constantly.
If I enter the boot mode is not reset, it stays on
What can I do to solve it.
Thanks
Probably, the fall broke more than just the screen. Try booting into recovery and flashing another rom or doing a nandroid restore.
Or, you could also wipe cache and data to restore the rom to its original state
I tried to enter to recovery screen but the phone restart, just in the initial boot screen the phone do not restart
Hi All,
I'm still trying to fix my phone,
I tried with a RUU rom but i get error 131 cid incorrect, my phone is unbranded, i tried to create a goldcard with no luck.
When i put the phone on the recorery option the phone restart.
Any advice please
Dear Friends,
I need your kind help to get back my orbit 2,
I have flashed android built on nand and flashed update too, but it has stop working touch screen. so i tried to get back my windows rom back. but now i have lost windows default bootloader. i have tried all the buttons too with soft reset. but i am failed to get back. i have tried t remove battery then reset , also not working this trick.
When i power on, it start scrolling android booting...
is there any hope to get my phone back???
please help me...
link:
[SOLVED] Connection Error [262]. Stuck in bootloader (tri color) mode