Dear Friends,
I need your kind help to get back my orbit 2,
I have flashed android built on nand and flashed update too, but it has stop working touch screen. so i tried to get back my windows rom back. but now i have lost windows default bootloader. i have tried all the buttons too with soft reset. but i am failed to get back. i have tried t remove battery then reset , also not working this trick.
When i power on, it start scrolling android booting...
is there any hope to get my phone back???
please help me...
link:
[SOLVED] Connection Error [262]. Stuck in bootloader (tri color) mode
Related
Hi all,
I hv a Jasjar with the latest I mate ROM installed and Radio 1.04.10...Today morning I was watching Video in TCPMP Player and when I closed the player the phone got Hanged..then I tried soft resetting it...but to my disappointment it is stuck at I mate Boot Screen which shows all the figs for ROM,Radio and Protocol..doesn't move ahead...
I tried :
-Hard resetting it by pressing zero...still it comes to the same state and doesn't move ahead.
-Tried Hard resetting it via Boot Options...clearing the Reg Hive and Formatting the storage...but the screen becomes white and stays on there.
-Tried updating to O2's latest ROM byputting it in b/l mode...it did got upgraded but then it is stuck again at O2 logo and doesn't move ahead..
-Also tried removing Sim and Memory card...still same result...
Can anyone throw more light on this...PLs it is very URGENT....
Thanks in Advance...
do the "radio only" flash that's on the ftp...
if it works, that's lucky...else go for a replacement!
San
Hi,
i installed that new Rom for my htc p3600, and it worked fine.. some minutes after that the screen went black.. i made a softrestart from that small button with the styles.. the trinity started, but stopped on the screen with : smart mobility... that black screen after the moving HTC logo... and nothing happend...
it is just stuck there..
after many restarts i thought i would re install the rom, but the pc can't see the device any more... the redlighted led is on when i plug the device to the pc, but still nothing happening..
the device is just stuck... doesn't go in to the system,, doesn't accept new instalation from the pc...
and all my work is stopped...
i have backup for my data, but i need to use my device.. please please.. help help help.. very fast..........
thank you..
Boot loader
i think may be it will help you if you get in BootLoader Mode ( by pressing the Camera Button and the Off Button )
then during the device in the boot loader mode try to connect it to your PC and try to flash another rom
GOD help you
What's your bootloader details?
I urgently need help with my BA
I attempted to upgrade to Beta version:WM6.1 CEOS 20262.Build 19949 Aku1.2
by sun dream and now its stuck in the bootloader screen, I have gone through the wiki of BA and have done various suggestions on how to hard reset my device but nothing seems to be working. Any help extended will greatly be appreciated. Thanks and More Power to all you guys!
Flash again. If no progress - flash different ROM. Never forget about proper HR after each flash.
hey out there,
i do have some problems with my Blue Angel the last days, i flashed a new rom
1.15.00
1337.45
V.6.01.09 DVH
and had Problems with active sync, seemed like it didn't get an Ip adress.
so i flashed sunwell 6.1 and i was able to synch but radio rom was missing and i wasn't able to do calls at all. Hard/soft resetted reflashed flashed other roms, but now i stuck directly after the Bootloader screen when showing windows mobile 6 logo.
It makes an annoying "Bling" and it's reacting on commands, Stylus or Power button, but i didn't finish starting even after 10 min. I flashed some other roms.
same problem. any suggestions?
sorry for abusing this thread but i didn't wanted to start a new "wuhuhuhuhu i bricked my friends BA" thread.
thanks florian
edit.
if starting now it shows Radio and GSM None
hm...formatted with mtty restarted
put sim inside.
displaying R,G NONE when booting.
soft resetted, displayed right data.
Booted, finally working whyever.
dear all experts ...
I tried to update my Shadow by the new wm6.1 rom.. the first time it went to 100% and restart with an error 270 : the image is corrupt . After, when I boot loader, it go to 2% and restart every time ( many) :
I'm stucked at bootloader mode and tried many roms but no one sucsess ... all of them reach 2% and then stopped.
even I tried the original one (Shadow_Software_Update_1.11.531.5.exe) from t-mobile official site but also same result.
so can any one help me and give me any solution to try?
try to install this on your phone
http://forum.xda-developers.com/showthread.php?t=394478
after that try installing a cooked ROM
Dear sir;
thanks a lot for attention to my problem and ur kind reply.
I already tried to do this but...
* How can I upload sspl/uspl to my phone from bootloader because it's the only mode I can work my phone?
* when I tried to do USPL + RUU it go to 100% and then the phone restart and the RUU program says corrupted image...
then the phone stays in it's state (only can go to bootloader mode).
can I use MTTY program to flash sspl/uspl and USPL and then the new rom? if yes .. how I can do it?
Or what may I do my friend..
thnx a lot again
if you can only get to the bootloader then try flashing to the t mobile rom, then start over
Mee toooooo
I installed this ROM and it doesn't work!!
the screen is freeze with the Windows 6.5 Logo, and thats it!!!!
what can i do for do a hard reset?????? (i already do that thing, power it on, and then push the 2 soft buttons, and didn't work!),
HEEEEEEEEEEEEEELP!!!!
isfected said:
I installed this ROM and it doesn't work!!
the screen is freeze with the Windows 6.5 Logo, and thats it!!!!
what can i do for do a hard reset?????? (i already do that thing, power it on, and then push the 2 soft buttons, and didn't work!),
HEEEEEEEEEEEEEELP!!!!
Click to expand...
Click to collapse
Power off the phone
Press and hold the camera and voice keys
Insert the USB cable, Keep holding the camera and voice keys until you get the bootloader screen
Then flash an original ROM.
Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.
Thx all of ya , problem solved.
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.
Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss
Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!