I got minicm and i tried both manual and automatic(.zip) instalation of overclocking module, and when my phone gets near 710Mhz(the...stable clock) it will reboot i'm now using Stock Clock 600Mhz(with module OC uninstaled)
OS USED: MiniCm RC1
you should try the manual instruction n edit the hw_config.sh+ add the parameters on it(to set it on boot)...the update.zip just adding the x8oc.ko only
cruizz said:
you should try the manual instruction n edit the hw_config.sh+ add the parameters on it(to set it on boot)...the update.zip just adding the x8oc.ko only
Click to expand...
Click to collapse
tried, even tried with that nexus rom that comes with OC preinstalled and still phone will reboot (
I have the same problem you aren't alone u.u
Sent from my X8 using XDA App
diegoxcore12 said:
I have the same problem you aren't alone u.u
Sent from my X8 using XDA App
Click to expand...
Click to collapse
Yayz, I'm not alone) so, guys, any suggestions for us to get Overclock working?
+1
I Tried the "X8 Nexus Rom" wich is a MiniCM with OC preloaded.
With this ROM, the phone reboots 1minute after being started
I think it's due to OC but I don't know how to disable it in this ROM.
i'v done this with manual edit on floyo, hackdroid rc4, minicm, and stock rom,
always work.
i don't know why u can't, its not a rom problem.
if u do it right n still don't work,
maybe its on processor.. (somebody said that here, every proc has it own potential)
There is no way to automatic-install the OC feature, even the developer itself said that it's the matter of time to release .zip files to auto-install.
My answer is: manual install - 100% of satisfaction
romcio47 said:
There is no way to automatic-install the OC feature, even the developer itself said that it's the matter of time to release .zip files to auto-install.
My answer is: manual install - 100% of satisfaction
Click to expand...
Click to collapse
It comes preinstalled with MiniCM(Through .zip upg) and it also comes with nexus ROM for X8(see in Dev. thread)
I tried to install it manualy and i got bootloop, dunno why but it works on nexus 9 rom for me, i tried to find a differance but it all the same... just weird.
You need to remember, that your CPUs are in fact a part of a huge silicon wafel, and that there are differences among them. Your CPUs apparently have been cut out from the part of that wafel that doesn't like overclocking and you can do nothing about it. Also, there are some FSB gaps, so if 710 MHz causes reboot or hands the device, try some higher freqs, they might actually work
Graveir said:
You need to remember, that your CPUs are in fact a part of a huge silicon wafel, and that there are differences among them. Your CPUs apparently have been cut out from the part of that wafel that doesn't like overclocking and you can do nothing about it. Also, there are some FSB gaps, so if 710 MHz causes reboot or hands the device, try some higher freqs, they might actually work
Click to expand...
Click to collapse
That's good to know, thanks, I'll try Higher and lower frequencies and i'll tell you how it went
Graveir said:
You need to remember, that your CPUs are in fact a part of a huge silicon wafel, and that there are differences among them. Your CPUs apparently have been cut out from the part of that wafel that doesn't like overclocking and you can do nothing about it. Also, there are some FSB gaps, so if 710 MHz causes reboot or hands the device, try some higher freqs, they might actually work
Click to expand...
Click to collapse
691 Mhz overclock seems to be working fine for me Thanks for the help
see this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
its v004 OC on floyo 0.15,and works...
Sent from my X8 using XDA Premium App
is it save for x8 to overclock??? i'm still scare to overclock..
joeniar said:
is it save for x8 to overclock??? i'm still scare to overclock..
Click to expand...
Click to collapse
I think is safe (for me), had been using it since V003 until now,using 768mhz almost 1 week, no reboot at the moment.
All latest ROMs for X8 come with OC preloaded
(nexus v1, nexus v2, minicm rc2)
And they all make my f.....ing phone reboot every minute !! Even after full wipe.
Please developpers !! Stop include overclock in all your roms !!!
Returns to 600mhz
I can not use the overclock because when I reboot the phone it is on 691Mhz soon after he returns to 600mhz. I know that the CPU clock is dynamic, but he never returns to 691mhz. What did I do wrong? I used the XDA tutorial for overclocking. I'm using Floyo v0.25
try full wipe in xrecovery
dont work yet
Spevky said:
try full wipe in xrecovery
Click to expand...
Click to collapse
I just try full wipe and did not work. I think it's some parameter or file permission...
Related
After some days of testing the new kernel I decided to share it with everyone,
Now just to make things clear, the disclaimer:
Use it at your own risk, If you are unsure of what you are doing please do not flash this kernel.
As a rule of thumb ALWAYS do a nandroid backup first. I will not be responsible for any damage you may get and
I'm almost sure that flashing this boot image will void your warranty, but if you are reading this forum certainly you already did it.
Click to expand...
Click to collapse
ATTENTION:
If you flash 1GHz and have issues please use 768MHz instead.. It seems that not all liquids are stable at 1Ghz.
Click to expand...
Click to collapse
It's available in two versions for the ROM 2.000.16, 1GHz and 765Mhz.
Search the files in here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Code:
1Ghz
Multitouch (many thanks to Luke Hutchison for all his work and help) [for now, only with Dolphin Browser]
Works very well with clean ROM 2.000.16, installed with acer tool.
Bootloader info is:
Code:
USB FastBoot: V1.00.03
HW version: v0.4
AMSS version: A1-02.01.03
Build Date: Jan 26 2010, 14:29:43
Instructions:
1. Read the disclaimer.
2. Do a nandroid backup.
3. Download and unpack the zip file.
4. Enter bootloader.
5. Do in console/cmd:
Code:
fastboot -i 0x0502 flash boot <boot image name>
fastboot -i 0x0502 reboot
6. Have fun
I didn't posted the unrooted version because when you flash this kernel you will be voiding your warranty (if you already didn't), so doesn't make sense to keep your phone unrooted, unless you really want it.. If thats the case, contact me..
As you may know, this was build from a kernel source that has some bugs on it, so, you may experience some erros.. Didn't found any, but if you find please report..
Dmesg will output some errors, but for now they are armless..
GREAT WORK!
Havn't tested it out yet, gonna do it after tomorrow since I need my phone at work tomorrow.
Is there a noticeable speed-difference when using the 1ghz-version?
Nice work mate!
I'm using the 765Mhz version without any problem. Can anyone tell if the 1GHz causes the phone to overheat?
brumbrum said:
GREAT WORK!
Havn't tested it out yet, gonna do it after tomorrow since I need my phone at work tomorrow.
Is there a noticeable speed-difference when using the 1ghz-version?
Click to expand...
Click to collapse
nferro said:
Nice work mate!
I'm using the 765Mhz version without any problem. Can anyone tell if the 1GHz causes the phone to overheat?
Click to expand...
Click to collapse
There is no overheat on the phone but didn't gave it intensive use yet..
On benchmarks it has significant improvement, but the phone normally has no lag, so, there is almost nothing to be noted ..
finally... in front of a computer... gonna try now!!! u da man disc0!
EDIT: everything working great so far loving the multitouch in dolphin!
testing 1ghz settings
It would be really great if we could have SetCPU working with 1ghz enabled to preserve battery life.
EDIT : I've emailed SETCPU's developer to ask him to set something like he did for the Droid (some kind of autodetection).
ahsid said:
It would be really great if we could have SetCPU working with 1ghz enabled to preserve battery life.
EDIT : I've emailed SETCPU's developer to ask him to set something like he did for the Droid (some kind of autodetection).
Click to expand...
Click to collapse
You can add the information to setcpu.txt with the cpu speeds in the sdcard , but would be great to have support directly from the menu ..
@disco hit me u on gtalk "[email protected]"
What about the battery ?
Does this hack drains it more or not ?
nferro said:
Nice work mate!
I'm using the 765Mhz version without any problem. Can anyone tell if the 1GHz causes the phone to overheat?
Click to expand...
Click to collapse
It wont overheat the qsd8X50 was meant to run at 1ghz.
i'm running it at 1ghz no overheating problems at all for now neighter does the battery run out of juice faster, incredibly the opposite is the case it seems to last a bit longer, maybe cause of the optimized kernel
disc0 said:
You can add the information to setcpu.txt with the cpu speeds in the sdcard , but would be great to have support directly from the menu ..
Click to expand...
Click to collapse
Would you please tell me the numbers of the setcpu.txt?
I had no luck, after flashing 1Ghz no boot avbl, just blank screen. flashed back 765Mhz didn't help. Had to commence back from scratch with A1tools and a .bin
boglll said:
I had no luck, after flashing 1Ghz no boot avbl, just blank screen. flashed back 765Mhz didn't help. Had to commence back from scratch with A1tools and a .bin
Click to expand...
Click to collapse
if u're using eclair it wont work.. this kernel is for donut only
well, now I know...
The 765 MHz version works great with my liquid - but i got bootloops with 1 GHz version, what could i do?
eX1337 said:
The 765 MHz version works great with my liquid - but i got bootloops with 1 GHz version, what could i do?
Click to expand...
Click to collapse
there's a 920 Mhz variant somewhere in modaco, 1ghz works on some (random) liquids only, mine works
[[ Cold ]] said:
there's a 920 Mhz variant somewhere in modaco, 1ghz works on some (random) liquids only, mine works
Click to expand...
Click to collapse
With 920 MHz it boots into Android - but it reboots directly.
Am i so unlocky?
- need some 850 MHz Kernel to try
eX1337 said:
With 920 MHz it boots into Android - but it reboots directly.
Am i so unlocky?
- need some 850 MHz Kernel to try
Click to expand...
Click to collapse
Don't worry! You are not alone
This is for those who are using overclocked kernels..Thanx to fugumod and other kernels that we can now overclock our G3 !
Please share the "setcpu profiles" you are using and the "BATTERY EXPERIENCE" with them..
This will help other users to get the most out of their phones
These are my profiles...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
to bad nobody else added some profiles here i was searching for more information about this topic ..
here is mine
vikraam said:
here is mine
Click to expand...
Click to collapse
I suppose its Fugumod right?? 2.4 800 MHz edition?? How much battery bakup do you get with these profiles with normal usage??
vikraam said:
here is mine
Click to expand...
Click to collapse
dhirend_6d said:
I suppose its Fugumod right?? 2.4 800 MHz edition?? How much battery bakup do you get with these profiles with normal usage??
Click to expand...
Click to collapse
Sorry, didn t see your signature at first. You have ultra edition. How much battery backup do you get with normal usage??
dhirend_6d said:
I suppose its Fugumod right?? 2.4 800 MHz edition?? How much battery bakup do you get with these profiles with normal usage??
Click to expand...
Click to collapse
Its fugumod ultra pre release which was posted by pwng3
with normal usage i get one and half day
My profiles:
Battery: I got 2 full days with those profiles with normal usage.
Can I use setcpu on my rooted apollo, or do I need to have a special kernel?
SparkyRih said:
Can I use setcpu on my rooted apollo, or do I need to have a special kernel?
Click to expand...
Click to collapse
You can install but you can t use it for anything. . You need to flash an OC kernel in order to OC.
Just changed the values in SetCPU. I will post soon how the battery life is.
dhirend_6d said:
You can install what you can t use it for anything. . You need to flash an OC kernel in order to OC.
Click to expand...
Click to collapse
Yeah, I was scared that would be the case
Thank you for your answer
Need Help
Hey Guys,
I am new to the Forum, I Have flashed with Indroid 4.3 Darkfroyo(Hyper Mix). Now I need to flash my Kernel with Fugumod Ultra. Can someone tell me how to flash the Fugumod ultra O.C edition to my galaxy 3 apollo. Please help me .
anukuttan said:
Hey Guys,
I am new to the Forum, I Have flashed with Indroid 4.3 Darkfroyo(Hyper Mix). Now I need to flash my Kernel with Fugumod Ultra. Can someone tell me how to flash the Fugumod ultra O.C edition to my galaxy 3 apollo. Please help me .
Click to expand...
Click to collapse
There is an update.zip for it in the fourth page of that thread http://forum.xda-developers.com/showthread.php?t=1134369&page=4
Thanks to this post my phones battery is going to last a lot longer May i ask, how do you take a screenshot on your phone?
I use G3Mod Ultimate 1.3.4 200-1200 Mhz and I keep it simple
I have just one option enabled in profile, which is if temp > 40 clock 200-400 conservative
Rest I have kept it at 200-800 Mhz On Demand at all times.
When I play Games I set it to 600-1200 On Demand.
I have been using it since 1.3.4 G3Mod Ultimate was released, and have not faced any Overheating, Lags, freezes what so ever. It does last around 1.5 to 2 days.
My quadrant score (ofcourse other tweaks as mentioned in my signature also applies)
at 600-800 on demand is around 590
at 600-1200 on demand is around 710
Smonic said:
Thanks to this post my phones battery is going to last a lot longer May i ask, how do you take a screenshot on your phone?
Click to expand...
Click to collapse
You can search Market for apk named Screenshot IT
Or you can just hold down the back button and press the home key for a screen shot
Sent from my GT-I5800 using Tapatalk
Best way of taking screenshot is through Qtadb
It can take screenshots in any apps
back key+home doesnt work in some apps
http://rootzwiki.com/showthread.php?t=1873
has anyone successfully ran faux's newest 1.3ghz kernal or the 1.2ghz right now for me the 1.2ghz is working awesome but i cannot get the 1.3ghz kernal to boot up all well 1.2ghz is all i wanted
Quoting myself:
Swiftks said:
So apparently v1.8 is split now between tegra parts d00 & 1100 (a link for each).
If you have tegra part d00, you can achieve 1.3 GHz O/C (for v1.8)
If you have tegra part 1100, you are currently @ 1.2 GHz O/C (for v1.8)
To determine which v1.8 you need, you can either adb or use terminal on the phone (available in the market) and use the following commands:
"su"
"cat /proc/cmdline"
*Your looking for "tegrapart=mbr:d00 or 1100"
Click to expand...
Click to collapse
Does the new kernel work in CM7..i don't see a compatible link.
Yeah I rushed this thread a little too fast close it down
Sent from my MB860 using Tapatalk
jiggytom said:
Does the new kernel work in CM7..i don't see a compatible link.
Click to expand...
Click to collapse
Beta 3 has the new kernel in the rom itself!
Sent from my MB860 using Tapatalk
It looks like it only has a 1.1GHz OC on PB3.
Andrew149 said:
Beta 3 has the new kernel in the rom itself!
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
There is no 1.2 or 1.3 option in Cm7 beta3
Sent from my MB860 using XDA Premium App
I just flashed the 1.3 OC on CM7. WHY WONT IT BOOT UP!!?? I is NOT compatible with CM7. That effing SUCKS!
Everyone should wait till cm7 is ready to be used on the ATRIX unless beta help is really necessary right now.
Don't risk ruining your phone to get the latest roms/kernels!
Keep it simple imo
Sent from my MB860 using XDA App
TheToiletSpaula said:
Everyone should wait till cm7 is ready to be used on the ATRIX unless beta help is really necessary right now.
Don't risk ruining your phone to get the latest roms/kernels!
Keep it simple imo
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Honestly everything but the camera works perfect...
I flashed 1.3 OC on Alien and got stuck on boot animation.
Alien Atrix
Mine gets stuck on the dual core screen too. I have tried all the wiping tricks both in rom manager and fast boot all to no avail.
Sent from my MB860 using XDA App
Found a bug in Cm7 kernel 1.2GHz. I installed version 1.3GHz and it did not work for my phone. So, I installed version 1.2GHz and everything is apparently normal, but still indicating 1.3GHz in SetCPU, even waping all data.
Anyone having problems of installing apk files? I'm getting "Application not installed" error.
katinatez said:
I flashed 1.3 OC on Alien and got stuck on boot animation.
Alien Atrix
Click to expand...
Click to collapse
1.3 on mine with alien had random reboots. 1.2 seems to work but with less undervolting.
Sent from my MB860 using XDA App
Weird....,many people have been saying that they are using faux's 1.3 GHz OC kernel without problem on the official CM7 Beta 3 thread: http://forum.xda-developers.com/showthread.php?t=1235315&page=12
but most people trying it on this thread say they are getting a softbrick/bootloop problem?
Only the d00 Atrixs can run the 1.3 GHz, I'm chuffed with the 1.2Ghz, though
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dereknas said:
Anyone having problems of installing apk files? I'm getting "Application not installed" error.
Click to expand...
Click to collapse
Anyone can help?
Swiftks said:
So apparently v1.8 is split now between tegra parts d00 & 1100 (a link for each).
If you have tegra part d00, you can achieve 1.3 GHz O/C (for v1.8)
If you have tegra part 1100, you are currently @ 1.2 GHz O/C (for v1.8)
To determine which v1.8 you need, you can either adb or use terminal on the phone (available in the market) and use the following commands:
"su"
"cat /proc/cmdline"
*Your looking for "tegrapart=mbr:d00 or 1100"
Click to expand...
Click to collapse
i have d00 AT&T atrix but cant use the 1.3GHz kernel on stock 4.5.91
stuvk on moto boot logo with unlocked!
stick to 1.2 for now.
The greatest rom of all time has returned!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here we have ICS Final. The best when it comes to Stability and Speed.
This rom is LIGHTWEIGHT.
Meaning:
NO Live wallpapers
NO Google search
NO default file manager
NO system apps
So don't complain about how there's no this and that. Install it yourself from the market.
If you want live wallpapers, you can find them in this link: http://www.mediafire.com/?pispten98mc8kcf
Download it and put it in the system/app folder and change permissions to rw-r-r and reboot.
For Google search: Set it to search the web only. Or just install the updated version from the market, here:
https://market.android.com/details?...nbGUuYW5kcm9pZC5nb29nbGVxdWlja3NlYXJjaGJveCJd
To install, do a complete wipe (Factory reset, wipe dalvik and cache.) then flash with CMW 5.
This is a 2.3.7 based custom rom.
If I remember correctly, the rom comes with Turbo Boost V8 already installed. If you want to update it, check out GadgetCheck's thread here: http://forum.xda-developers.com/showthread.php?t=1380006&highlight=turboboost
Anyway, here's the rom link!: http://www.mediafire.com/download.php?irxqmvsnng3bbb7
NOTE: I'm doing this with Jusada's permission. So no copyright infringement here
Also, this is the non-tweaked version. It has an OC kernel installed but you might run into stability issues at high frequencies.
Since this rom is all about speed and stability, battery life suffers a bit. Check out the thread on my signature for a fix.
Nice! 10,000 downloads xD
Hmm...what different this and other thread about ics final by jusada?
This is Jusada's exact version with nothing modified. The other thread started has a couple of things changed up. Which is why in this thread it says ORIGINAL. Since I go around recommending this rom a lot, I thought I'd ask Jusada if I could make a thread to share it too.
what the different with jusada final..i thing there stil much bug in jusada final
jamrong said:
what the different with jusada final..i thing there stil much bug in jusada final
Click to expand...
Click to collapse
What bug? I've been using this rom ever since it came out and I haven't found ANY problem with it.
Great,i think i will try
来自我的GT-S5830 使用XDA 高级版 发送
not working completely, when I choose the ICS theme it tells me that there is missing assets
helofast said:
not working completely, when I choose the ICS theme it tells me that there is missing assets
Click to expand...
Click to collapse
Lmfaooooooooooo. Dude are you new? Lol, click apply anyway. That's gonna happen with a lot of themes that you install on your phone. Always apply anyway no matter what they say.
Do u use this rom with your cpu set to min245 max806?
How the battery life on this rom?
it is old one ..or new .. i use ics final jusada.. rom ..
Sent from my GT-S5830 using xda premium
immy28 said:
it is old one ..or new .. i use ics final jusada.. rom ..
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Man, everything has been said in the first post. Just read instead of asking. It is Jusada's old rom that has been removed due to some violations.
Battery lasts from 1 day up to 3. Depends how you use your phone.
invention said:
Man, everything has been said in the first post. Just read instead of asking. It is Jusada's old rom that has been removed due to some violations.
Battery lasts from 1 day up to 3. Depends how you use your phone.
Click to expand...
Click to collapse
It wasn't removed for a violation. I removed it, for my own reasons.
follow me on tumblr at http://jusada.tumblr.com/
or at twitter at @JusadaTheLost
Right, sorry.
Is this really ics for galaxy ace?Is there any bugs?
Did you have his permission?
SuperAce609 said:
I'm doing this with Jusada's permission. So no copyright infringement here
Click to expand...
Click to collapse
@ebreo. It's based on 2.3.7 version.
consegregate said:
Did you have his permission?
Click to expand...
Click to collapse
Thanks for the consern bro. I have no issue as long as I'm not asked for support. I only support at my own site where I can control fully.
follow me on tumblr at http://jusada.tumblr.com/
or at twitter at @JusadaTheLost
sounds silly but i cant set CPU speeds for profiles, how do you do it for screen off and on ?
pyronia said:
Do u use this rom with your cpu set to min245 max806?
How the battery life on this rom?
Click to expand...
Click to collapse
Read the last sentence on the first post.
ryanraven said:
sounds silly but i cant set CPU speeds for profiles, how do you do it for screen off and on ?
Click to expand...
Click to collapse
Go to Profiles at the top
Click Add profile
Where it says Profile, select it and tap "Screen Off"
Set the frecuencies you want in use while screen is off (If you want just one frecuency, put both sliders on the same number)
Set priority (in case you have other profiles, otherwise don't bother)
Select governor (Won't really matter since cpu is gonna be running at 1 frecuency)
Tap save
Go back to Profiles tab at the top, then tap Enable at the top left to make the profiles work.
those who are having antutu crash problem try this >
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR THOSE WHO HAVING THIS ISSUE KINDLY CHECK THIS SOLUTION POSTED BY ANTUTU TEAM AND TEL ME IF IT SOLVE UR ISSUE OR NOT SO THAT I CAN REPLY TO THEM THANKS
> i cant test this because i m on 4.3 and i haven't face this issue on any rom , if i overclock my phone then only my antutu crash (weird )
What has the External SD to do with the test of the CPU? This doesn't make sense..
For me turning off Stamina Mode helped
on my XSP it also reboots at the same position but only in CM11. in Stock rom its fine.
panjgoori said:
on my XSP it also reboots at the same position but only in CM11. in Stock rom its fine.
Click to expand...
Click to collapse
Agreed, same here. I'll maybe give it another try in a few months or so. Until then i just don't recommend to use the Cyanogenmod.
It happens with every single FXP out there, same as for 10.1 and 10.2.
They aren't even capable of fixing the torch for the older ones, so this may be a major problem for them and the reason why it's not fixed yet
same as for other things like using the LEDs correctly or integrate some of the functions that a stock rom does have, like the function to use WLAN only if in range, stamina mode and stuff like that. They have other "priorities."
CM based ROM crash... AOSP based like mahdi, vanir dont crash... (vanir gives highest in cpu float) 21600++
first test only cpu
then test Full
Fix crash for me forever
danielhariri said:
CM based ROM crash... AOSP based like mahdi, vanir dont crash... (vanir gives highest in cpu float) 21600++
Click to expand...
Click to collapse
so far vanir rom is the best one and mahdi comes after it. booth are good.
panjgoori said:
so far vanir rom is the best one and mahdi comes after it. booth are good.
Click to expand...
Click to collapse
benchmark dont matter... both are good xda dont allow to compare rom
Hello Again
My Crash in 21% Antutu Fix in 4.3 Leak by Test All Option except cpu and then test cpu and then Full test
My Score by antutu 4.1.7 in 4.3 leak was 23300
You can also create a logcat when you are one of the users with this problem. If you connect your phone via ADB on your computer, start LOGCAT and Antutu you can collect data about the crash..
amir-kia said:
Hello Again
My Crash in 21% Antutu Fix in 4.3 Leak by Test All Option except cpu and then test cpu and then Full test
My Score by antutu 4.1.7 in 4.3 leak was 23300
Click to expand...
Click to collapse
sad to say, this one did not work in me.. :crying:
Change kernel to NayakKernel Xperia SP v0.2 :laugh:
My Xperia crashes too on full Antutu tests
Hey,
My phone also crashes on CPU float test at 21% - in full test. No SD card inside - yet. I will try an class 10 64GB to see if it works - hope soon enough.
I disabled Stamina mode and test again except CPU test.
I obtained 18341 without CPU test
At CPU test I have 2975.
Running again Full test - after I have CPU test done separately - again CRUSH !!!
My Sony is Xperia SP C5303 - with LTE support, standard ROM - unlocked - Android 4.1.2, kernel 3.4.0-perf-g1285c6c - 14.08.2013.
On Quadrant I obtained 8094 top score, with AntiVirus app and Battery manager app on. :victory:
Waiting for update to 4.3 or 4.4 - hope soon - to fix this issue on Antutu.
Keep in touch.
Trcka1 said:
Change kernel to NayakKernel Xperia SP v0.2 :laugh:
Click to expand...
Click to collapse
Worked perfectly for me and fixed any crashing problems. Best answer here, thank you !
Creyos said:
Worked perfectly for me and fixed any crashing problems. Best answer here, thank you !
Click to expand...
Click to collapse
what about those who do not have their BL unlock?..
Hi,
I think the problem regards the cpu governor of some firmware's stock kernel, or some device's cpu gets hot faster than other..
Try this:
Install a cpu control app from the store (es. "no-frills cpu control")
open it and change the governor to "interactive"
press apply
do the benchmark again..
OR
Keep the stock governor (ondemand) but set the max freq of the cpu at 1674
apply and try again..
In my case those solutions work both.
Let me know and press thanx if it has been useful
cheers
worked
removing sd card and disabling power management wroked in 4.3!!!!
Got a score of 23760!!
karto57 said:
removing sd card and disabling power management wroked in 4.3!!!!
Click to expand...
Click to collapse
Sadly not in my phone.. Still crashes with sd card trick..
The only way to finish the test for me is the method above..
Mine crashes too both 4.1.2 and 4.3. Tried it without sdcard as mentioned and it works. Very strange.