SD card ext keeps unmounting when trying to sync - Atrix 4G General

Only happens when I try to sync, if I unplug the sync cable it automatically mounts can anyone help me on this one?

Depending on what USB mode you're using, that might be normal behavior. The mode is either Motorola Phone Portal, Windows Media Sync, USB Mass Storage, or None.
USB Mass Storage would definitely unmount both the internal and SD card.

I had hoped you would be mentioning the problem where they don't REmount after mass storage disconnection. Happened to me thrice and I'm still on my first week with this phone...
Sent from my MB860 using XDA App

Further; I hoped one could keep one of the two stores mounted while the other is accessable over mass storage. That bubble popped a couple of days ago also.
Sent from my MB860 using XDA App

So I removed MotoMedia Link software, cleaned the registry on laptop then rebooted. Reinstalled software and was able to sync phone to computer without having SD card ext unmounting. I think it was a driver issue or something.
Atrix rooted 1.5.7
GingerBlur 1.2

Related

Using Micro SD card through HTC HD2 while charging through PC.

How can I charge my HTC HD2 through USB on a computer without mounting my memory card so I can still access all my files and games through my phone? I found absolutely no help for this issue on Google, which is crazy. I also tried ejecting it from Windows, but the card is still unaccessible through the phone after I eject.
set the phone to active sync instead of hard disk and your problem is solved.
I love you. Thanks for the help. rofl

Mount two SDCards at the same time when USB plugged in

I have inserted a MicroSD card to my Atrix and every time I plug it in a computer only the external card gets mounted but the internal card still appears with a drive letter in the explorer.
Is it possible to have access to both cards at the same time when plugged in over USB?
There is a setting in SD card management to give you access to both.
Sent from my MB860 using XDA App
While it is plugged in?
Sorry, I cannot test it right because my phone is bricked

winamp dies after you connect phone via usb

Anyone else using winamp, and has an issue where if you connect your phone via USB (and hence unmount your storage/sd card), afterwards, it keeps crashing? Even after your storage has been remounted and can be accessed by any other app.
Basically, if I want to transfer files to my phone, I have to reboot afterwards. Not a major annoyance but definitely an annoyance.
Its not winamp as it didn't do this on my N1 or my sgtab, just my atrix
Hello
Ive got the same bug, with winamp after connecting the Atrix to PC.
I believe its something to do with the winamp that was updated in the last days, since all the other apps that can access the SD, were able to get to the SD without problems, only winamp not. notice that the widget shows that there is no SD card detection....
Mine too was restored successfully after reboot...

USB charger

So I was wondering if anybody else has had this problem. So I plug in my phone to transfer music to my phone and I worked fine. The next day I wanted to save some of my picture I took that day to my computer and all the sudden my computer tells me that "this device is unrecognizable." So I tried to do it on my friends computer and it tells me the same thing (we both have windows 7). My phone charges fine it just won't let me put it on USB disk drive mode. I just wondering if its the cord or my phone
Sent from my myTouch 4g using XDA
INFINITYandONE said:
So I was wondering if anybody else has had this problem. So I plug in my phone to transfer music to my phone and I worked fine. The next day I wanted to save some of my picture I took that day to my computer and all the sudden my computer tells me that "this device is unrecognizable." So I tried to do it on my friends computer and it tells me the same thing (we both have windows 7). My phone charges fine it just won't let me put it on USB disk drive mode. I just wondering if its the cord or my phone
Sent from my myTouch 4g using XDA
Click to expand...
Click to collapse
I used to have the same issue. What i did was i formatted my sd card. Right click the sd card in my computer, and format it (either NTFS or FAT, not sure), and it worked for me.
I did lose some data on my sd card, but it was nothing i didnt already have on my computer
hope this helps.. if not sorry for wasting your time
If formatting SD card doesn't help - try rebooting to FASTBOOT and attempting connection. If it'll still be connected as "unrecognized device" - then you either have a bad cable or a bad USB slot, and I can even point specifically that you have a bad D+ line.
EYO3L said:
I used to have the same issue. What i did was i formatted my sd card. Right click the sd card in my computer, and format it (either NTFS or FAT, not sure), and it worked for me.
I did lose some data on my sd card, but it was nothing i didnt already have on my computer
hope this helps.. if not sorry for wasting your time
Click to expand...
Click to collapse
when i plug in my phone it to my computer my phone doesnt even ask if i want to put it in disk drive and i used other cords and i used my cord on my fiends phone and it worked fine for him. i can format it on my computer cause it wont even ask me if i want to go into disk drive mode it just charges
Try Multi-Mount SD from the market. Maybe that'll fix things. And try what Jack_R1 said.
Sent from my Sense 4.0 Glacier using XDA Premium.
I have had this problem several timed before. It usually happens when the cable is starting to peel and the wires are showing... or if the cable is too bent at the ends.... I just buy another cable and the problem is fixed...
Hope I helped
Sent from my Zips creamed glacier with a shot of awesomeness > using xda premium
You should try re downloading the drivers
Sent from my HTC Glacier using XDA

Issues Connecting PC to Nook Color with CM7 SD Card

Hello everyone. I have a Nook Color that I am running CM7 on. It's working great (compared to how slow it was when I had CM10 on it), can run most apps and games just fine. However, I have a number of movies and TV shows I would like to be able to watch (the SD card I bought to use for all this is a 32GB card, bought specifically to have space for apps and videos). However, I cannot for the life of me figure out how to actually get the video files onto the tablet. Here's what I've done so far and what I've read about:
1. Started with my tablet turned off, plugged it into the computer, and turned it back on. At first, I was getting the device installing window popping up on my computer, but quickly disappearing and nothing connecting. Eventually I got a notification saying I needed to restart my computer to finish installing, so I did that. Next time I plugged my tablet in, the device installation screen stayed up until the bar was complete (a couple minutes). Throughout this process, I manually went to the notifications list on my tablet and continuously turned on the USB storage option any time I reconnected. Still nothing. It does charge however.
2. I've also tried two different USB connector cords, all three of my USB ports, and restarting my computer multiple times.
3. I also tried to see if I could go the Bluetooth route, but that didn't really go too far. Got the two things paired and they claimed they were connected, but it didn't work out at all.
Any other options, or any thoughts on things I can try? Thanks for any help.
Well, first the Nook Color has no Bluetooth antenna so the range is inches, not feet.
Second, you need to configure the device properly. Go to settings and turn off USB debugging. Can't remember exactly where that is on CM7. Second, you need to set up USB Mass Storage. If I remember right go to storage and hit the advanced button under the menu. Then when connected do the notification turn on thing.
As a last resort take the sd out and insert it in the PC to transfer the files.
Sent from my SM-T707V using XDA Premium HD app
leapinlar said:
Well, first the Nook Color has no Bluetooth antenna so the range is inches, not feet.
Second, you need to configure the device properly. Go to settings and turn off USB debugging. Can't remember exactly where that is on CM7. Second, you need to set up USB Mass Storage. If I remember right go to storage and hit the advanced button under the menu. Then when connected do the notification turn on thing.
As a last resort take the sd out and insert it in the PC to transfer the files.
Sent from my SM-T707V using XDA Premium HD app
Click to expand...
Click to collapse
I thought about just putting the files onto the SD card (I have no issue with that), but I wasn't sure where to put them. Do you know what directory it has to be in?
To clarify, the SD card I want to put the videos on is the SD card that SM7 is installed on. I don't know if that changes anything, but when I put the SD card into my laptop, I just get a bunch of unusable files. Can I not transfer files that way (direct from PC to SD)?
Otherwise I found apps that would allow me to transfer over wifi, but I don't know what directory to put them into.
AriusAneid said:
To clarify, the SD card I want to put the videos on is the SD card that SM7 is installed on. I don't know if that changes anything, but when I put the SD card into my laptop, I just get a bunch of unusable files. Can I not transfer files that way (direct from PC to SD)?
Otherwise I found apps that would allow me to transfer over wifi, but I don't know what directory to put them into.
Click to expand...
Click to collapse
Since you have CM installed to SD that copy on to sd inserted in PC will not work. You cannot see the right partition with windows.
And wifi transfer works great for me. Just put them anywhere and once on the nook you can use the file manager to move them where you want.
Sent from my SM-T707V using XDA Premium HD app

Categories

Resources