I have search everywhere for this, I never post questions cause I can usually find the answer, I have checked throughout XDA and google and check multiple forums. I have been reading on how to create a cab file I just don't have the time right now to sit down and work on it for hours. Walshieau has a site going for Provxml and Xml Config Loader but he hasn't got to North America. If anybody has a cab or is skilled at making one the settings are minimal, I have included them.
If you can help many thanks.
Rogers CANADA
GPRS Settings
1. Operator Name & Country : Rogers Canada
2. Network Name : MY ISP
(Name in the Connections Tab)
3. Modem Name :ROGERS GPRS
4. Modem Access Point Name :internet.com
5. Username :wapuser1
6. Password :wap
7. Domain :””
8. Is there a tick in the 'This network connects to the Internet' box :
NO
9. Is there a tick in the 'This network uses a proxy server' box :
NO
MMS Settings
2. Network Name : MY Work Settings
(Name in the Connections Tab)
3. Modem Name :ROGERS MMS
4. Modem Access Point Name :media.com
5. Username :media
6. Password :mda01
7. Domain :””
8. Is there a tick in the 'This network connects to the Internet' box :
NO
9. Is there a tick in the 'This network uses a proxy server' box :
NO
1. Server Name :Rogers MMS
2. Gateway :172.25.0.107
3. Port Number : 8080
4. Server Address : http://mms.gprs.rogers.com
5. Connect Via : My Work settings
6. Size Limit : 300
7. WAP Version : 2.0
I made a workaround for the cab file, I will be working on making a cab file and post for those interested at the following site, for now the work around works great.
http://forum.xda-developers.com/showthread.php?t=303046&page=3
Rogers htc touch Rom
Any Rogers htc touch Rom?????
You won't get a Rogers Rom here, you can get ROM made from other users but not the official ROM from Rogers.
I want to get my galaxy tab on my company's network.
I can issue the certificate in a .p12, export it giving it a password lets say "cert", sent it to my tab, but when i go to install it, it asks for the password, i put in "cert" and I get a "Please enter the correct password" error message.
Have any clue what is going wrong?
I think I had to rename my cert to either .pfx or .p12. Only one of them worked.
Apart from that, make sure you're using the password you used to sign the certificate - it may be different than your wifi password.
I had no problem importing a .p12 file with a password for my wireless network. Worked just the same as on my Android phone.
Make sure you aren't confusing the certificate password with the certificate store password. The certificate store has its own password which prevents unauthorized access to imported certificates.
If you don't have any other certificates, you can start from scratch, from Settings -> Location and Security I would do:
* Clear credentials
* Set password (this is the password used to allow access to credentials, you will need to enter this every time your tab is rebooted to allow access to your cerificate by the wireless stack)
* Ensure 'Use secure credentials' is ticked.
* Choose 'install from USB storage' to install your .p12. At this point it will ask for the password of the .p12 file
If that doesn't work, I would guess the problem is in how you are generating it. (Mine was provided for me so I don't know how that side of things works)
Intro:
So, I've had some problems accessing the market from a forbidden country (i.e Sudan, Lebanon). When I tried to use the built-in VPN client in a Cyanogenmod ROM it turned out that it doesn't work so after a well-spent time, I figured out how to use a VPN on my HD2.
What Can it be used for?
- Access the internet using your data connection without revealing your IP address.
- Unlock the market for forbidden countries. (my case)
- Basically, VPN on your Androided HD2.
Requirements:
An HTC HD2 with a Cyanogenmod Rom or a ROM based on it.
OpenVPN Settings application (Provided in the attachments)
An OpenVPN config files and certificates (Recommended will be provided below)
An SD card.
Instructions:
1- I recommend using Hostizzle, go to it then register for a free plan. (go for a paid one if you want)
2- After registering, download your keys (only keys and not .exe ) and extract them to a new folder on the root of your sd card with the following name "openvpn" .
3- Go to your phone and install the "OpenVPN Settings" application (attached) .
4- Run the Application and Allow all the SuperUser Requests. Then press menu and choose "Advanced" . Make sure that "Load tun kernel module" is ticked, then hit "TUN module settings" and make sure that "Load module using" is set to "insmod" and "Path to tun module" is set to "/system/lib/modules/tun.ko" .
5-(optional) if you faced troubles using the internet, long press on your configurations name and then "Preferences" then tick "Use VPN DNS Server" and set the "VPN DNS Server" to "8.8.8.8".
6- Return to the main screen of the app and tick "OpenVPN" and then tick your configuration.
Then it will go through a sequence, when you see "Connected to *.*.*.* as *.*.*.*" then you're connected, if you're seeing a blank after "as" then you have a problem and you have to check the procedures again.
Tips & Warnings:
*You can use any OpenVPN service as long as you can obtain the configurations file.
*I have only tested this on "HyperDroid", but it should work with any cyanogenmod ROM.
*Do not install "OpenVPN installer" as it will mess up your phone's VPN configurations.
*OpenVPN Settings can be obtained from the market, but in my case I couldn't do it .
*The files you should copy to the "openvpn" folder should at least contain the following : (*.ovpn, ca.crt, client.crt, client.key, ta.key)
*It is ok for the connection to keep restarting, it will connect you soon.
*Anything else you tell me
Frequently Asked Questions
-not yet ...
I wrote this tut because I wasn't able to access the Market from my phone because the country was forbidden
Hit thanks if it/I helped.
I attend Virginia tech and their wireless is secured with a certificate system.
On my computer I have it setup as wpa2-Enterprise AES with the authentication method as Microsoft: Smart card or other certificate. I had to install the cert. and select the CA cert.
How can I set this up on my phone? I have loaded the user cert and the CA cert (from windows) and tested the settings out but I am still unable to get it to work.
Any help would be appreciated.
TIA
brianmay27 said:
I attend Virginia tech and their wireless is secured with a certificate system.
On my computer I have it setup as wpa2-Enterprise AES with the authentication method as Microsoft: Smart card or other certificate. I had to install the cert. and select the CA cert.
How can I set this up on my phone? I have loaded the user cert and the CA cert (from windows) and tested the settings out but I am still unable to get it to work.
Any help would be appreciated.
TIA
Click to expand...
Click to collapse
Put the cert on the phone's internal sdcard & go to Settings > Location & Security & Install from USB Storage (internal sdcard). Then connect to the wifi & options will come up. Configure with your schools settings.
I have the certs installed as mentioned in the OP. I just don't know what settings to use. PEAP, TLS, which phase 2 to use etc..
brianmay27 said:
I have the certs installed as mentioned in the OP. I just don't know what settings to use. PEAP, TLS, which phase 2 to use etc..
Click to expand...
Click to collapse
Shouldn't your school provide you with that info? Try TLS, that's what my company uses. If that doesn't work then try another.
Woops, They totally do. Can't believe I could not find that before..
Thanks
Any hotspot mods anyone.
If you are on sprint this one works.
https://forum.xda-developers.com/sprint-s7-edge/how-to/hotspot-bypass-nougat-ok-t3563446 (SAUCE)
Here it goes (no root required):
1. Enable developer mode:
a. Go to settings
b. Scroll down to about phone
c. Repeatedly tap "Build number" until developer access is granted
2. Get ADB installed w/ drivers
a. https://forum.xda-developers.com/sho....php?t=2588979
3. Enable USB Debugging
a. Go to settings
b. Go down to developer options
c. Scroll down to USB Debugging and turn it on
d. Connect phone with USB to PC
4. Get into ADB shell
a. Open a command prompt (windows key + R , type "cmd" in the box and press enter is my favorite way)
b. Run:
Code:
adb shell
5. Enable the bypass
a. Disable the DUN requirement
Code:
settings put global tether_dun_required 0
b. Overwrite the DUN APN
Code:
settings put global tether_dun_apn "APNDUN,n.ispsn,,,,,,http://mms.sprintpcs.com,68.28.31.7,80,310,120,,default,dun,mms,supl"
6. Turn off Mobile Data
7. Turn on HotSpot
8. Turn on Mobile Data (The order is important for DNS to work properly)
Alternative 5-8: w/ static DNS
5.b (Does not attempt to replace default active APN at start)
Code:
settings put global tether_dun_apn "APNDUN,n.ispsn,,,,,,,,,310,120,,dun"
This one can also be tried if data does not work on the phone during hotspot:
Code:
settings put global tether_dun_apn "APNDUN,n.ispsn,,,,,,,,,310,120,,default,dun
(the extra default in there should keep the phone on data, but no guarantee)
6. Turn on Hotspot
7. On your devices, you might have to set a custom DNS server:
a. Google DNS: Google DNS Guide
b. OpenDNS: OpenDNS Guide
Sprint's IP's are:
Code:
68.28.31.30
68.28.31.31
c. If you must also specify a static ip, use:
Code:
IP: 192.168.43.XXX , where XXX is between 2 and 254
Gateway: 192.168.43.1
Subnet Mask: 255.255.255.0 or /24
DNS 1: 68.28.31.30
DNS 2: 68.28.31.31
To revert:
Code:
settings put global tether_dun_required 1
settings put global tether_dun_apn null
Notes:
Line 5.b:
For
"name,apn,proxy,port,username,password,server,mmsc ,mmsproxy,mmsport,mcc,mnc,auth,type"
Alternative line 5.b (you can run the command again, and yes the first part is required in []):
Code:
[ApnSettingV3] carrier/Name,apn,proxy,port,user,password,Unused/server,mmsc,mmscproxy,mmscport,mcc/part1,mcc/part2,authType,types[],protocol,roamingProtocol,carrierEnabled,bearer,profileId,modemCognitive,maxConns,waitTime,maxConnsTime,mtu,mvnoType,mvnoMatchData
[ApnSettingV3] SprintDUN,n.ispsn,,,,,,http://mms.sprintpcs.com,68.28.31.7,80,310,120,,default|mms|supl|dun,ipv4,ipv4,true,0,,false,0,0,0,,,
For types[], you can use default|dun|mms , separated by the pipe " | " for multiples. I'm not sure what is needed but you can test around. If you get an error about subscription then likely you put in a malformed string. For the mvno (prepaid) probably the last two are gid and 4E or something like that (0,0,0,,gid,4E) ; see your APN info
Survives Reboot, PRL Update, Profile Update, UICC Unlock
Last edited by paul2112; 15th March 2017 at 06:39 PM.
Has anyone been able to automate this process? I'm trying to use tasker to turn off mobile data which it does, then turn on hotspot which it does not. When I set tasker to turn off hotspot it'll do that just not turn it on. Anyone have any luck w/ that?