Database Users

HD2 Android - What am I doing wrong?

Hi.
I have installed ChuckyROM (gone through the HSPL process).
I have then downloaded several different android builds and the same thing happens when I follow the SDCARD instructions.
I load the files onto a 2GB SDCARD, Plug it into my device, restart the device, tap the CLRCAD.exe first then tap HaRet.exe
I loads into a black screen with some very small text in the top left corner, then this text slowly fades away and nothing happens.
Any ideas?

I've heard you need at least 1.5 gig of free space on your SD card to install android, so make sure you don't have other files on it.
Also, give it 15 minutes to let it do it's thing on first boot, a lot of stuff has to be created and initialized.

Being going for over 30 mins now, and I completely reformatted the SD card before I put the android files on it.

Try re-formatting your SD card within Windows and ensure it is formatted to 32kb clusters, this is one of the things that can cause an issue.
ps what radio are you using?

SORTED
Reformatted my SDcard and now its working.
Thanks.
Got Android with HTC Sense running - and it is awesome.

[HELP] Cannot get SD Android running on my HD2

HD2 T9193 Australia
512Kb Flash Memory
SPL-2.08.HSPL CotullaHSPL
ROM Energy Leo 29007 Sense 2.5 Jan 24
Radio 2.15.50.14
Over last few days, have download several SD builds of Android.
I Copy the android folder to root of SD card
I start the phone in Windows Mobile
I run CLRCAD
I run HARET
I get the grey window about starting/booting (cant remember exact, head spinning)
then get black screen with small writing
then get HTC splash screen and thats it.
each build I have tried, have left at boot screen from 60 to 90 minutes.
Now, 6 months ago with earlier version of Energy ROM, and different radio, I could load earlier version of SD Android.
Today I had a friend around, with an older radio and the same earlier version of energy rom that I used to have, and still no go on his.
What is happening (or not).
Do I need to have an EXT2/2/4 partition on my SD Card?
Something more simple??
Ideally, I wanted to try a Desire HD Sense ROM.
Have tried
CopesHD2GingCyan7Release1
Core_Droid_HD_V0.4_Release_Version
mattcleofroyo1.8
MDJ_FroYo_HD_v._4.6_MDJ_S78.0
NexusHD2-FRG83D_V1.8_(Froyo 2.2.1)
SuperRAM_FroYo_V1.5

Moby58 said:
HD2 T9193 Australia
512Kb Flash Memory
SPL-2.08.HSPL CotullaHSPL
ROM Energy Leo 29007 Sense 2.5 Jan 24
Radio 2.15.50.14
Over last few days, have download several SD builds of Android.
I Copy the android folder to root of SD card
I start the phone in Windows Mobile
I run CLRCAD
I run HARET
I get the grey window about starting/booting (cant remember exact, head spinning)
then get black screen with small writing
then get HTC splash screen and thats it.
each build I have tried, have left at boot screen from 60 to 90 minutes.
Now, 6 months ago with earlier version of Energy ROM, and different radio, I could load earlier version of SD Android.
Today I had a friend around, with an older radio and the same earlier version of energy rom that I used to have, and still no go on his.
What is happening (or not).
Do I need to have an EXT2/2/4 partition on my SD Card?
Something more simple??
Ideally, I wanted to try a Desire HD Sense ROM.
Have tried
CopesHD2GingCyan7Release1
Core_Droid_HD_V0.4_Release_Version
mattcleofroyo1.8
MDJ_FroYo_HD_v._4.6_MDJ_S78.0
NexusHD2-FRG83D_V1.8_(Froyo 2.2.1)
SuperRAM_FroYo_V1.5
Click to expand...
Click to collapse
Have you tried putting a blank data.img file on the sd card before the boot?
If not try that, they are usually available from the first post in the builds thread.
A few I tried wouldn't boot the first time unless I put that file in there.
I'm guessing it won't help, because some (if not all) of those builds can create a blank one for you, but it won't hurt to try.
This is the one from MDJ's 4.6 build you have tried. The link is from his thread. Extract the file using 7zip and stick it in the android folder.
http://www.multiupload.com/BJ2FXF9IRM

There's no need for partitioning or any kind of fancy stuff for running a simple WinMo6.5/Android dualboot. I suppose formatting your SD card (do it in WinMo, seems to be more effective) should solve your problems.
@MattOG: The data.img helps shortening the first boot time, I've never heard it actually fixes problems?

MattOG said:
Have you tried putting a blank data.img file on the sd card before the boot?
If not try that, they are usually available from the first post in the builds thread.
A few I tried wouldn't boot the first time unless I put that file in there.
I'm guessing it won't help, because some (if not all) of those builds can create a blank one for you, but it won't hurt to try.
This is the one from MDJ's 4.6 build you have tried. The link is from his thread. Extract the file using 7zip and stick it in the android folder.
http://www.multiupload.com/BJ2FXF9IRM
Click to expand...
Click to collapse
Thanks, tried the blank data.img, both the 512Mb and 1Gig.... no go

MattOG said:
Have you tried putting a blank data.img file on the sd card before the boot?
If not try that, they are usually available from the first post in the builds thread.
A few I tried wouldn't boot the first time unless I put that file in there.
I'm guessing it won't help, because some (if not all) of those builds can create a blank one for you, but it won't hurt to try.
This is the one from MDJ's 4.6 build you have tried. The link is from his thread. Extract the file using 7zip and stick it in the android folder.
http://www.multiupload.com/BJ2FXF9IRM
Click to expand...
Click to collapse
Why
do
you
write
like
this?

You do have enough free space on your card for it to create the data.img right??

conantroutman said:
You do have enough free space on your card for it to create the data.img right??
Click to expand...
Click to collapse
Hope so, 8gig card with just the android folder

ok thats not it then........
The only thing I can think to suggest is to try a different WM ROM... see if you can find the energy rom you used before from the energy archives....

It's my thought process. Did I offend your eyes?
Sent from my HD2 NANDroid using XDA App

conantroutman said:
ok thats not it then........
The only thing I can think to suggest is to try a different WM ROM... see if you can find the energy rom you used before from the energy archives....
Click to expand...
Click to collapse
Tried that with the mate's HD2, as it has the same, older energy rom that I used before

[Q] Why wont my HD2 Accept ANYTHING?

Hi,
I have been on this forum for the past 2-3 days trying to get android on my gf's HD2 and it just wont have it.
I have tried MCCM's HD v4 Desire one
I have tried Froyo 1.5
I have tried DL Desire Series, both SD and MAGLAR.
The ones where you click CLRCAD.exe then haret.exe either say it doesent have certificates to run or parts are missing. Or it goes to a black scree and gets stuck on "Jumping To Kernel" and it stays like that for ages (tested for 1 hour, never budged)
The DL desire series via MAGLAR wont work either, I need HSPL (sp?) to install MAGLAR but HSPL keeps reporting back that the file Rapi.dll is missing.
My SPL version is 1.42**** so technically thats right ( from what I have read )
I have tried formatting the SD card via PC and device, also tried a factory reset and an additional 2 other SD cards. Still nada.
What else can it be? Someone mentioned the radio but there is so many questions being asked in a specific thread that mine gets lost and since this is more of a global issue I thought a thread of its own is deserved
I really want this and will go to any length to get it ( not keen on ROM flashing thought, would like to avoid turning the handset into a hammer rather than a phone)
Hope I havent busted any rules
Cheers,
Gib

You need radio 2.14 or more for Android.
aka, upgrade your ROM.

You are not alone
You are not alone here.
I have been having this problem too, I get stuck on the HTC white screen. though I haven't tried much ROM but I have tried formating and reflahing of my WM ROM.
I once did a stock ROM official update with: (RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2 .15.50.14_LEO_S_Ship)
ever since I have not been able to find how to flash using SPL, I have been flashing using SSPL_RU and my radio is 2.15.50.14.
Could this reason be the problem.
I need help please I want to have a feel of droid.

Know the feeling
I have been trying all the different android magldr sd roms and everytime its the same story. First boot fine. Second boot and on it just hangs at the green htc logo. I have tried so many things i don't know what to do next.

Have you tried one of the Energy ROM's? I found on my unlocked HD2 that these were the only roms (going back a while now) that I could get Android running off an SD card. I've since heard that there is a basically blank rom for people who want to run nothing but android. It's a small rom, only about 30mb.
It's in a few places around the board. I can't remember what the name of that one is off the top of my head, but any of the Energy series, or the Miri ROM's apparently work too.
Good luck!
Gibbo3771 said:
Hi,
I have been on this forum for the past 2-3 days trying to get android on my gf's HD2 and it just wont have it.
I have tried MCCM's HD v4 Desire one
I have tried Froyo 1.5
I have tried DL Desire Series, both SD and MAGLAR.
The ones where you click CLRCAD.exe then haret.exe either say it doesent have certificates to run or parts are missing. Or it goes to a black scree and gets stuck on "Jumping To Kernel" and it stays like that for ages (tested for 1 hour, never budged)
The DL desire series via MAGLAR wont work either, I need HSPL (sp?) to install MAGLAR but HSPL keeps reporting back that the file Rapi.dll is missing.
My SPL version is 1.42**** so technically thats right ( from what I have read )
I have tried formatting the SD card via PC and device, also tried a factory reset and an additional 2 other SD cards. Still nada.
What else can it be? Someone mentioned the radio but there is so many questions being asked in a specific thread that mine gets lost and since this is more of a global issue I thought a thread of its own is deserved
I really want this and will go to any length to get it ( not keen on ROM flashing thought, would like to avoid turning the handset into a hammer rather than a phone)
Hope I havent busted any rules
Cheers,
Gib
Click to expand...
Click to collapse

Solution!
Instructions :
- Download the Android SD version of your choice. Unzip, Extract the 'Android' folder to root of your SD Card. (Make sure to Format the SD card before doing this.)
- After you have done all steps go into Android folder and tap CLRCAD (for working sound), and after that just tap HaRET
-Booting ..
-Enjoy

kottaho said:
You are not alone here.
I have been having this problem too, I get stuck on the HTC white screen. though I haven't tried much ROM but I have tried formating and reflahing of my WM ROM.
I once did a stock ROM official update with: (RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2 .15.50.14_LEO_S_Ship)
ever since I have not been able to find how to flash using SPL, I have been flashing using SSPL_RU and my radio is 2.15.50.14.
Could this reason be the problem.
I need help please I want to have a feel of droid.
Click to expand...
Click to collapse
Ater trying some nand roms i came back to the orignal firmware( the same as you).
And i also have this problem , it just load into a picture with htc on it.

Have you tried using a different SD card? My Sandisk 8gb didn't accept anything. I had an old 512mb laying around that came with my E90, loaded SuperRAM on it (aprox 450mb including data.img) and it booted straight away.

2.15.50.* is the right radio for most SD builds, make sure you have enough free space on SD. most builds have at least 512mb if not 1gb data.img which gets created when first boot. If runs out of space it will get stuck on boot screen. No hspl required with 3.14 HTC winmo rom

I also try to get Android in my HD2 (energy ROM). I am somewhat puzzled however: I want to flick back and forth between WM and Android and many programs I have reside onto my SD card. I have read in an earlier post that before attempting Android I should format my card - does this mean that I cannot have WM data (programs etc) in the same SD card I run android? or that I can transfer them back AFTER I manage (if) to load Android?. Thank you

The SD card has to be formatted in FAT32. Just to make sure the card is clean I copy all my data to my pc, format the card and transfer it all back.

Aesthetic said:
The SD card has to be formatted in FAT32. Just to make sure the card is clean I copy all my data to my pc, format the card and transfer it all back.
Click to expand...
Click to collapse
OK thank you - got it!

Unfortunately I cannot get passed the green HTC splash screen - my HD2 stays there for time no end and the only solution is to take battery out. Any suggestions?

Assuming you've got everything set up properly (right radio, hspl, ...) which you can find on the Android forum. I think you'll have to try using a different brand of sd card. Some cards simply don't play nice with Android.

Got uber annoyed with the SD method, just ended up doing a full scale flash to ROM. Was easier lol

MrAskani said:
Have you tried one of the Energy ROM's? I found on my unlocked HD2 that these were the only roms (going back a while now) that I could get Android running off an SD card. I've since heard that there is a basically blank rom for people who want to run nothing but android. It's a small rom, only about 30mb.
It's in a few places around the board. I can't remember what the name of that one is off the top of my head, but any of the Energy series, or the Miri ROM's apparently work too.
Good luck!
Click to expand...
Click to collapse
I am using Energy ROM (Energy Serie: Energy.Leo.28244.Sense2.5.Cookie.2.0.Feb.12)
My phone just hangs on the white HTC screen when I try to boot into Android from the SD card. I flashed my ROM with SSPL_RU after an update with the Stock ROM (RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship)

ehh
Aesthetic said:
Assuming you've got everything set up properly (right radio, hspl, ...) which you can find on the Android forum. I think you'll have to try using a different brand of sd card. Some cards simply don't play nice with Android.
Click to expand...
Click to collapse
I would almost agree with that except, i have 2 exactly the same 16 gb cards, each with a 3 gb fat32 primary partition. 1 loads android but wont allow me to do things like take pictures[it says there isn't an sd card.] The second card just hangs at the green htc screen. Even if I copy the working partition to the other card, it still hangs.

evo1rs said:
2.15.50.* is the right radio for most SD builds, make sure you have enough free space on SD. most builds have at least 512mb if not 1gb data.img which gets created when first boot. If runs out of space it will get stuck on boot screen. No hspl required with 3.14 HTC winmo rom
Click to expand...
Click to collapse
Thanks for this Info. I didn't take into consideration that the file will be enlarged during booting. The copied Android folder was 508MB in size but this got enlarged to about 1.3GB during boot up. I thought if I just leave about 1.2GB in all the SD card I have been trying that it should be enough. But I was wrong.
Thanks a lot I have done multiple reboot without any problem.
I am enjoying my first Android feel.
Thanks once again.

Android on HD2 hates most SD Cards
From my own limited experience to also having read many posts I can say that most sd cards prevent Android from running properly on the hd2. Mine works fine with radio 2.14/2.15 and the stock Sandisk 16gb card that came with my tmous hd2, but I recently tried a wintec 16gb card that made Android run like a broke-wheel-cart and other sd cards I have laying around make it fail.
I think everyone needs to add what card they are using to their signature, or else we might all just end up howling in the wind.
Based on some feedback from another post I just ordered this Sandisk 16gb card from Newegg. It is Model # SDSDQ-016G-A11M . It is reported that that model# provides class10 speeds even though it is sold as a class2. It's use with Android is supposed to be good.

loading android on htc hd2

is it supposed to take more than 2 hours?

No.
Something must of went wrong.
Can you explain the steps you did?

i extracted to sd card
took out the usb cable
went in my storage card, opened the folder
clicked on clrcad
clicked on haret and started the load
now its reading
acr=### fl=####raac=##

The first i've tried took me about 1h, but I had to install everything Mgldr, CWM, etc. ..

Are you installing SD version or nand?
johnnyboy8707 said:
i extracted to sd card
took out the usb cable
went in my storage card, opened the folder
clicked on clrcad
clicked on haret and started the load
now its reading
acr=### fl=####raac=##
Click to expand...
Click to collapse
Sent from my HD2 using XDA App

what is rootfs?

lozonw said:
Are you installing SD version or nand?
Sent from my HD2 using XDA App
Click to expand...
Click to collapse
im pretty sure my sd card, i went through it to click HaRET

Which rom did you download or trying to install?
I haven't done sd version since nand was released.
Do you need to use windows at all?
johnnyboy8707 said:
im pretty sure my sd card, i went through it to click HaRET
Click to expand...
Click to collapse

lozonw said:
Which rom did you download or trying to install?
I haven't done sd version since nand was released.
Do you need to use windows at all?
Click to expand...
Click to collapse
ive tried shubCRAFT_v1.5_STOCK.rar
and ive tried HyperDroidV1.5.zip
Can you link me the way you did it maybe a quick step guide and a file download pleasE?

It's not supposed to take more than 2 hours, 20 mins max.
Try either of the following, a combination, or all of the following:
format your sd
rextract the android folder form the build you downloaded, into the root of your sd card
Try a different blank data image (if the build requires you to have a data image in there, some builds make their own)
If it's the case of where it makes its own, go into the android folder and delete that incomplete data image
Is it just the build you are using now that doesn't work, or does every other build give you the same problem?
Maybe you need HSPL installed, iunno
You got the latest radio?
Tried a different winmo rom?

Try reading thru this.
http://forum.xda-developers.com/showthread.php?t=881958

Kailkti said:
It's not supposed to take more than 2 hours, 20 mins max.
Try either of the following, a combination, or all of the following:
format your sd
rextract the android folder form the build you downloaded, into the root of your sd card
Try a different blank data image (if the build requires you to have a data image in there, some builds make their own)
If it's the case of where it makes its own, go into the android folder and delete that incomplete data image
Is it just the build you are using now that doesn't work, or does every other build give you the same problem?
Maybe you need HSPL installed, iunno
You got the latest radio?
Tried a different winmo rom?
Click to expand...
Click to collapse
ok im sorta lost ill try and make sense of everything, bare with me
how do i download to the root of my sd card? Maybe using nand way would be more easier
latest radio? you got a link for that? how do i check that?
HSPL how would i know if thats installed
Im running 6.5 on the hd2 right now, havent tried anything else except android

Nand is the way if you do not need windows.
Here is a guide by Mskip with links to everything you need.
http://forum.xda-developers.com/showthread.php?t=893948
Here is a link to the ClockworkMod Recovery which will be very helpful.
http://forum.xda-developers.com/showthread.php?t=898913
And here is a link to the rom I use daily, Hyperdroid which is great.
http://forum.xda-developers.com/showthread.php?t=918899
It takes me less than 30 minutes to go thru all the steps needed.

what does "failed to find rootfs on sd car. you need to unzip a rootfs zip file to the root of your sd card

[REF] A Brief guide to Installing and Maintaining Android [SD/RAM] on HD2 Despy1989 thread.
3) Android Build :
Download your chosen Android build on your computer.
Extract / Unzip the folder on the computer
Now copy into the Root of your SD card.
Folder should be labelled "Android"
Once copied into SD card you will see 2 files: CLRCAD.exe and HaRET.exe which have to be run to boot into Android.
There will also be other folders / files (Android Apps, initrd.gz, system.ext2, rootfs.img, zimage, startup.txt, ts-calibration) please leave them as they are.
QUOTE=johnnyboy8707;11737355]what does "failed to find rootfs on sd car. you need to unzip a rootfs zip file to the root of your sd card[/QUOTE]

[Q] Installin android sd version

hi
im tring to install sd version of android. for some reason most of the versions here stuke in ablack screen with green HTC logo.
is antbody know y is it?
only two old version worked on my hd2
what preeinstal i need to do with my phone?

if you write what steps you take while installing most probably someone helps you.

i have same problem.
just coping android on a SD card, when i am trying to open it, i get a black screen with HTC logo on it.
formatted a card, updated Rom version. and nothing helps.....
problem started when i switch a sd card for a new one, but now when i put an old one back - i still have a same problem.
( on old card everything worked )

angel182 said:
i have same problem.
just coping android on a SD card, when i am trying to open it, i get a black screen with HTC logo on it.
formatted a card, updated Rom version. and nothing helps.....
problem started when i switch a sd card for a new one, but now when i put an old one back - i still have a same problem.
( on old card everything worked )
Click to expand...
Click to collapse
do you use winmo,and which rom do you want to flash, and what steps do you make?

Yes, i am using a winmo, HTC HD2
i tried many roms, and i am talking about the ROM, not android.
and on each ROM i tried to load different Android, but it still
do not work.........stuck on a screen every time
Basically i use "energy rom", http://forum.xda-developers.com/showthread.php?t=591784
and tried with American Android ((( this one worked on a first sd -card)))
steps from a beginning : i flash rom on my phone, after hard reset, i flash it from my PC. then i copy the "Android" folder on sd card of my phone, then with "file explorer" i enter the "android" file ((for example - AMERICAN ANDROID)) , i choose CLRCAD, (nothing happens) and then i choose the HARET and loading begins. after that just a screen with HTC logo, a black one. i waited for 20 min, and more - nothing changes. (( tried to reset and load again, same screen, no progress....))
i just have no idea what else to do....
been searching for solution for few days now.
some say that updating the rom helps, but done that.

When i were using winmo i were formatting my sd on such a case. If it doesn't work i was formatting winmo too.
Sent from my HTC HD2 using XDA Premium App

ye....... the problem is that i done that all.........
just weird.

angel182 said:
ye....... the problem is that i done that all.........
just weird.
Click to expand...
Click to collapse
for example - AMERICAN ANDROID....i take it from your writing.you must put the folder Android to sd card not american android folder. i mean
sd card/android/clrcad then haret. not sd card/american android/android/clrcad

of course, i understand it.
i read manual for 100 times now, just to be sure i am doing things right.
i know the basics.
so lets see :
format to phone and sd card - checked
updated rom - checked
different sd card - checked
different rom with different android - checked
if i think about it know - phone is not working that's why i can't install android.
but - every rom is working good and android did worked once on a old sd card.
so have no idea what to do next.
at first i wanted to copy files from sd card where Android did worked, so there were file named "data.img" , couldn't copy it. don't know why.
so, in order for android to work on a phone now , it must create same file now. maybe card is somehow protected and doesn't allow phone to do it................. but i can copy all other stuff on it.
my knowledge and fantasy just ends here, but it kills me that such a simple thing doesn't work.
and if it doesn't work on an old card either, so can't figure out what causing this problem.

i can lastly say: download a new copy of american android.wipe everything from your sd.unrar american android in your pc.find the android folder.copy android folder to your sd via usb or card reader.clrcad then haret. the rom creates a new data.img in first boot.this rom may take half an hour to load. because i use it also. sorry if i'm unable to help

i had the same problem installing AmeriCanAndroid. it seemed like you did everything right from what i could tell anyway. i would try a different sd build to see if thats the problem.

mutil said:
i can lastly say: download a new copy of american android.wipe everything from your sd.unrar american android in your pc.find the android folder.copy android folder to your sd via usb or card reader.clrcad then haret. the rom creates a new data.img in first boot.this rom may take half an hour to load. because i use it also. sorry if i'm unable to help
Click to expand...
Click to collapse
thank you anyway, i"ll try that

htccraze said:
i had the same problem installing AmeriCanAndroid. it seemed like you did everything right from what i could tell anyway. i would try a different sd build to see if thats the problem.
Click to expand...
Click to collapse
did try, makes no difference
what about you? did it help, switching sd card?
been trying now different Android, same thing.

@angel182
At the time i was a bit of a noob still am really but when i installed a new sd build i think it solved my problem. if i remember correctly i may have even tried a different winmo rom (omega) which may have helped as well. i really cant be to sure because its been some time now & my memory aint what it use to. lol.
I will say that if you ever want to go to a nand version and dont like it for what ever reason you can always switch back. I'm sorry I couldnt of been more help.

Read this
Let me know if it helped you.