Related
i have an HD2 with a cracked screen i bought on craigslist. the unlock screen will stop working sometimes, and when i pull the battery and reboot, the home screen sometimes doesn't work. i've heard of these problems before but i'm not sure if this is a software or hardware problem. the previous owner had the phone running on AxLor DF1 XLite WWE. please help!
also i'd like to know how to flash to stock through micro sd, since i don't have a usb cable.
Thanks.
isoDUB said:
i have an HD2 with a cracked screen i bought on craigslist. the unlock screen will stop working sometimes, and when i pull the battery and reboot, the home screen sometimes doesn't work. i've heard of these problems before but i'm not sure if this is a software or hardware problem. the previous owner had the phone running on AxLor DF1 XLite WWE. please help!
also i'd like to know how to flash to stock through micro sd, since i don't have a usb cable.
Thanks.
Click to expand...
Click to collapse
Go to this thread here, this is a thread on flashing from SD card. It has all the info you will need.
Also you can buy a replacement screen and install it. There is a couple of threads here on XDA on how to do this just do a search for them.
T-Macgnolia said:
Go to this thread here, this is a thread on flashing from SD card. It has all the info you will need.
Also you can buy a replacement screen and install it. There is a couple of threads here on XDA on how to do this just do a search for them.
Click to expand...
Click to collapse
thanks, got on the stock T-Mobile rom now, but the touch screen on the lockscreen only sometimes works. would flashing to android fix this? i notice it will unlock sometimes after i press power then give it a few minutes, so i'm not sure if this is hardware or software related, and i'd like to avoid replacing the screen if i can.
EDIT: weird, i read a thread that said i should use the call button to unlock, and after a battery pull and waiting a few minutes, its worked for a bit, so i guess i found a temperary fix....
so now, i was wondering if its possible to boot android from the nand, and boot windows mobile 6.5, wp7, ubuntu, and meego from the sd, or can win mobile 6.5 only be booted from the nand? also, i need spl/hspl to boot all these things right?
isoDUB said:
so now, i was wondering if its possible to boot android from the nand, and boot windows mobile 6.5, wp7, ubuntu, and meego from the sd, or can win mobile 6.5 only be booted from the nand? also, i need spl/hspl to boot all these things right?
Click to expand...
Click to collapse
You can't have them all. You can have WP7 running from NAND and Android running through SD. Not too sure on the rest though.
Sent from my Nexus One using XDA App
isoDUB said:
thanks, got on the stock T-Mobile rom now, but the touch screen on the lockscreen only sometimes works. would flashing to android fix this? i notice it will unlock sometimes after i press power then give it a few minutes, so i'm not sure if this is hardware or software related, and i'd like to avoid replacing the screen if i can.
EDIT: weird, i read a thread that said i should use the call button to unlock, and after a battery pull and waiting a few minutes, its worked for a bit, so i guess i found a temperary fix....
so now, i was wondering if its possible to boot android from the nand, and boot windows mobile 6.5, wp7, ubuntu, and meego from the sd, or can win mobile 6.5 only be booted from the nand? also, i need spl/hspl to boot all these things right?
Click to expand...
Click to collapse
I know it would be a pain in the butt and in the wallet too. But it would probably benifit you to replace your screen. But this is a dessision that you will have to make for yourself.
Glad you found a teperary fix!
Yes you will need HSPL and also MAGLD flashed to your HD2 in that order to flash a NAND Andriod ROM. I beleive you can flash HSPL from your SD card, I think the thread I linked covers this. Buy I din't think you can flash MAGLD from your SD card. So you will have to have a USB cable for this. You can go to the HD2 Andriod NAND ROM section here on XDA and do a search for MAGLD and you will find the thread on it so you can double check and see if you can but I really don't think it is possibble. But you will have to have a USB cable to flash Andriod, WP7, MeeGo, and Ubuntu cause MAGDL does not have SD card flashing ability yet but they are working on it though. They are also working on being abale to run Windows Mobile 6.5 from SD card but as of right now it is not possibl, only from NAND right now. Also if you install a NAND Andriod ROM I think you can run WP7 from SD card but don't hold me to that cause I am not 100% sure of that, but if So that isit no other OS from SD card when running a NAND Andriod ROM.
T-Macgnolia said:
I know it would be a pain in the butt and in the wallet too. But it would probably benifit you to replace your screen. But this is a dessision that you will have to make for yourself.
Glad you found a teperary fix!
Yes you will need HSPL and also MAGLD flashed to your HD2 in that order to flash a NAND Andriod ROM. I beleive you can flash HSPL from your SD card, I think the thread I linked covers this. Buy I din't think you can flash MAGLD from your SD card. So you will have to have a USB cable for this. You can go to the HD2 Andriod NAND ROM section here on XDA and do a search for MAGLD and you will find the thread on it so you can double check and see if you can but I really don't think it is possibble. But you will have to have a USB cable to flash Andriod, WP7, MeeGo, and Ubuntu cause MAGDL does not have SD card flashing ability yet but they are working on it though. They are also working on being abale to run Windows Mobile 6.5 from SD card but as of right now it is not possibl, only from NAND right now. Also if you install a NAND Andriod ROM I think you can run WP7 from SD card but don't hold me to that cause I am not 100% sure of that, but if So that isit no other OS from SD card when running a NAND Andriod ROM.
Click to expand...
Click to collapse
thanks. for now i'll just work on installing android to the nand. i have a question though, will turning off the lockscreen in android possibly fix the touchscreen problem? i've been racking my brain trying to figure this out. i can either hurt my wallet with a screen repair, or i can do a battery pull every everytime i use the phone.. a real pain in the ass... sigh.. at least i got the phone cheap..
isoDUB said:
thanks. for now i'll just work on installing android to the nand. i have a question though, will turning off the lockscreen in android possibly fix the touchscreen problem? i've been racking my brain trying to figure this out. i can either hurt my wallet with a screen repair, or i can do a battery pull every everytime i use the phone.. a real pain in the ass... sigh.. at least i got the phone cheap..
Click to expand...
Click to collapse
You know I can not say for sure if turning off the screen lock would solve your problem. But it sure is worth a shot so I say go for it and see. Also you can use a app like Touch Tools or BsB Tweeks to cut the lock screen off in Windows Mobile. Just do a search here on XDA or do a Google search for them and you will find them I recomend the Touch Tools this is a really great app. It adds a lot of tweeking ability to your HD2. I love it and have been using it for atleast 5 to 6 months now. Anyway if turn off the lock screen with one off these apps and it fixes your issue. Then you will know if you turn off the lock screen in Andriod it should have the same result. Heck if it fixes it you might just keep Windows Mobile ha ha just joking. I would not blame anyone for flashing a NAND Andriod ROM and getting rid of Win Mo. I personaly like Win Mo.
You're best off investing in a USB cable too lol. Your local hardware shop will have them. Its just a basic USB to micro USB cable.
I dont think any amount of tinkering with any OS is going to resolve your touchscreen problem............
The screen is cracked right?? Theres your problem.........
Could be issues with the digitiser as well because of this.
First job, new screen...........
i've been messing with the phone last night, and it seems the problem is related to the end call button. it seems whenever i try to wake up the phone with that button, it will freeze, while using the green button will wake up with no problem most of the time (>20% chance of freeze). it seems the freezing doesn't happen after a certain amount of time, since i left the phone in sleep all night and woke it up in the morning no problem. so in case anyone has the same problem as me and is too cheap to fix it, try only using the end call button when actually calling/putting the phone to sleep.
and where could i get a micro usb cable cheap besides online? i think t-mobile has them but they're like $10+...
it's dead again!
help! (again). the touchscreen is dead after i HAD to use the power button today, and now i can't use the touchscreen at all! i've tried turning the screen on and off like 50 times, tried like 10 battery pulls, but nothing! please help! can i open my phone somehow to get to the end key hardware or something???
earlier today also happened to me this problem, I install several rom a day, I can not go a day without testing new rom, I thought the problem was that, because I found this topic, when I use the button to connect the phone, everything is well, but not always the case that with the off button. Was it any rom that did this damage in some piece of hardware?
Body said:
earlier today also happened to me this problem, I install several rom a day, I can not go a day without testing new rom, I thought the problem was that, because I found this topic, when I use the button to connect the phone, everything is well, but not always the case that with the off button. Was it any rom that did this damage in some piece of hardware?
Click to expand...
Click to collapse
isoDUB said:
help! (again). the touchscreen is dead after i HAD to use the power button today, and now i can't use the touchscreen at all! i've tried turning the screen on and off like 50 times, tried like 10 battery pulls, but nothing! please help! can i open my phone somehow to get to the end key hardware or something???
Click to expand...
Click to collapse
Sorry to tell both of you but your problems are hardware related. Member isoDUB yours is most definitly a hardware issue, but it has been a little bit sense you posted that post so I hope you have got your HD2 fixed or are working on getting it fixed. Member Body yours sounds hardware related to cause if you flash another ROM and you still have the problem with your buttons then it is most definitely a hardware issue.
Best option is to send to HTC and see if you can get a new one for free if you are under warranty.
same problem
hi
im not original english speaking so please excuse my bad english.
a few days ago i got the same problem. the display doesn't work when the phone was waked up with the endcall button.
when i woke up the phone with an other button the display worked.
i sended it to htc an they just told me they will not repair it because it is not in the original contition.
i flashed it with the latest original rom from htc but they didn't tell me what is wrong in detail.
i answerd them an asked what is wrong but until now i didn't get an answer.
Hello, I have a similar problem. When you unlock the screen so we jump on the green but some spots that disappear after a while.
Disaster strikes !!! Same prob here !!!
its indeed something with the buttons ... Touch screen is dead ... but sometimes its workin!!
Three months ago ... I changed the case of the HD2 with a new one. The "old"one was full of scratches ...
I think yhat HTC is not gonna accept that ... the "void-label" on the screw is damaged...
What do you think Guys ??
Grtz
every where the htc hd2 screen problem ........... i think that every one who has the htc hd2 facing the screen problem we shopuld start the new thread where we that who has the htc hd2 without any touch screen problem
Have the same damn problem ..once the screen is locked ..its impossible to slide it to unlock ..previously it was working 50% of the time and now it doesnt work at all :-(( ..
Any suggestions ? ...I read alot on the forums and people seem to say that its digitizer related but the imp thing is to note that almost 98-99% of the people having this problem are frequent Android rom flashers ..so does Android have something to do with this and will flashing original stock rom back be the solution ??
My screen suddenly became unresponsive and won't slide/unlock. The buttons work though, and I did the soft reset but after the boot it goes locked automatically. I am using this build http://forum.xda-developers.com/showthread.php?t=954030 but i don't think that's the problem since my phone worked 100% for a month while using that build. What should i do? should i get a new LCD? a new Digitizer?
abbadipod said:
My screen suddenly became unresponsive and won't slide/unlock. The buttons work though, and I did the soft reset but after the boot it goes locked automatically. I am using this build http://forum.xda-developers.com/showthread.php?t=954030 but i don't think that's the problem since my phone worked 100% for a month while using that build. What should i do? should i get a new LCD? a new Digitizer?
Click to expand...
Click to collapse
First try another build or possibly Windows Mobile and see if you still have no touch response.
If you don't its likely that the digitizer connection is faulty. This is a very common fault as the connector lays under the power/back buttons and if these are pressed excessively or over a period of time on some occasions you can break the digitizer connection.
Im having the same problem again and I don't know what to do...Has anyone had this happen to them and do something to fix it or know of something that could help...
Its guaranteed a hardware issue. Had to send my phone in on warranty and got sent a refurbed model. There are methods that you can attempt yourself towards the goal of fixing it, but disassembling the hd2, even with all the tutorial videos, seems incredibly daunting, especially the step that involves putting your phone into a special oven. Aside from that there are numerous reports from people who have gone through with the dis/reassemble process who manage to fix their issue, yet at the same time create a new issue that is equally unlikely to be repaired without causeing further problems
Sorry if this is in the wrong section or somthing, i dont know how to use this site
just before last Christmas 2010, i bought a HTC HD2 off eBay for £200.
it comes with windows mobile 6.5 but like many other HD2 owners, i put an android on. Anyway, everything was working perfect, but last week i dropped my phone on a gravel path and all the screen cracked. Luckily, it was just the glass that cracked, and not the actual LCD...so the actual touch screen still worked as well as the rest of the phone.
i continued using my phone for a while, whilst the screen was cracked as the rest of the phone was working perfectly, then my mum found a repair company that will fix it for me online - htcphonerepairscouk
so i paid £70 for the new digitizer and screen and sent my phone off.
I got it back in the post about half an hour ago and every time i start android up it waits for about 20 seconds and it just restarts, and goes on forever no matter what. its nothing to do with the OS as i tried hard and soft reboots and trying a different rom. i called them yesterday and they told me that it was the motherboard that broke and it would cost more than the actual phone to repair the motherboard. they obviously messed it up when fitting the new screen as it was working perfectly with MIUI android before i sent it of (despite the cracked screen)
what do i do as its their fault my phone wont work now? it definitely worked before i sent it. and is there a way to fix it? thanks so much!
check teh battery pins carefully, especially teh middle one. they bend easily and cause rebooting part way through the boot sequence.
did u try booting while on the charger? that works for me sometimes when it restarts
Sadly it may well be linked to dropping it, if it was hard enough to crack the screen its hard emough to damage the board as well, I suspect its going to be expensive if you follow it through
Help phone restarting every couple seconds after installation of 2.3.7
hello i am unsure if i am in the right section to ask for help but considering i cant post anything yet i thought this section would be a great place.I recently put android 2.3.7 on my phone tytung...it reads under settings kernel version:[email protected]#130......build is gwk74(nexushd2-gingerbread v3.2a nand) It just recently started starting over and sometimes it cuts off and i have to push the power button for it to come back on other times it does a soft reset.I am out of options and i want to remove this android off of my phone.(if possible) Can someone please help me to understand if this is a ongoing problem with all htc hd2 with nand android or if i should just install another android rom..;(
Now I've read about a problem of the hd2 having digitizer problems and that only a replacement will fix the unresponsive touchscreen issue. But why is it that when I can get my touchscreen to work that it works flawlessly until it goes to sleep? Then i have to continually wake and swype and sleep over and over until it responds. It just seems very weird that after it wakes that it never seems to have a problem. I'm using the miui rom right now and have set the screen to never go to sleep. So I want to see how long it will go without this problem. Has anyone else seen this happening with their phone as well?
Make sure the kernel, and Rom are up to date.
I have that too on an AOSP Gingerbread rom. The screen is not unresposive per se but calibration seems off some times, strage for a capacitive screen.
ive had the problem with android before and there were a few different fixes ...
one fix was to turn off compatibility mode
another was kernel
ive also had the problem with wp7 ( nothing a few hard resets and patience couldnt cure )
either way good luck
well since my first post, i hadn't let the phone go to sleep once and it worked perfectly fine. so i decided to turn off compatibility mode and let it go to sleep.... and when i woke it and i slid my fingers down it actually worked. so far it's worked every time. why would compatibility mode mess up the touchscreen though?
i have NO earthly idea! just a little tidbit i picked from a dev. i would speculate but would end up looking and sounding foolish. so im going to quit while im ahead and have actually been of help :-D cheers
Where can i disable compatibility mode?
I get the same problem. I've used a ICS rom for a day or so and suddenly the lockscreen was unresponsive. I thought it was ROM problem, so I flashed Cyanogen 7, but the screen didn't respond as well... I flashed everything to stock (removing magldr and hspl) and the problem stayed... After several restarts the screen started to respond and now it works (sort of). The tricky thing is: sometimes when I go out from some app in android, the screen doesn't respond again. Locking and unlocking the screen fixes this, but only temporarily.
Did this ICS rom screw something (...hardware?!) or is it a pure coincidence that a few people encounters the same problem for the first time in such a short period of time...
And one more thing... my warranty expired 5 days ago... please help!!!
I had this same problem with my phone before my warranty expired; before I flashed any android roms on it, and while it still had stock WM6.5. I called HTC customer support and they had me send in the phone for repair. They replaced the digitizer and I haven't had the same problem since. It was wierd because in my mind is seemed like a software problem because it would respond nicely as long as the screen was unlocked and the instant it was locked the response was very crappy, sometimes it took forever to unlock my phone. So it might somehow be a hardware issue
WaspVL1
Machupichu2 said:
Where can i disable compatibility mode?
Click to expand...
Click to collapse
spare parts!
I repair phone myself and i can say that i get A LOT of hd2's with this problem. For the most part it is the hardware because no matter what software you put on the phone it is just a matter of the luck you have to get it working. My hd2 broke 2 times b4 and it was always hardware. Htc must of messed up with the hd2 digitizer
cmacia06 said:
I repair phone myself and i can say that i get A LOT of hd2's with this problem. For the most part it is the hardware because no matter what software you put on the phone it is just a matter of the luck you have to get it working. My hd2 broke 2 times b4 and it was always hardware. Htc must of messed up with the hd2 digitizer
Click to expand...
Click to collapse
from what ive seen in photos of the leo mobo it looks like the connection for the screen/digitizer (not sure on hardware) is located right behind red end call/power button and from being mashed off,on,off,on,etc loosens/damages connection.
or is the hardware screen issue just a complete shot in the darks chance?
OH ... ive had the software issue (fixed as i mentioned earlier) AND unrepairable (with my limited tools and balls to physically tear into this badboy) hardware issues.
well, it's been a few days and my phone still seems to be fine. it hasn't once locked up on me yet. i don't know why turning compatibility mode would fix this. or maybe the phones connectors were loose and are now miraculously back in at the same time i unchecked compaibility mode. the only bad thing was that this was happening the last couple weeks and i had given up and already ordered a sensation 4g. or well, guess i have 2 phones now
Its seems possible. Every since I replaced my digitizer with a non OEM one its has never failed on me again. And I hope it never does. There dam expensive.
rubledub said:
from what ive seen in photos of the leo mobo it looks like the connection for the screen/digitizer (not sure on hardware) is located right behind red end call/power button and from being mashed off,on,off,on,etc loosens/damages connection.
or is the hardware screen issue just a complete shot in the darks chance?
OH ... ive had the software issue (fixed as i mentioned earlier) AND unrepairable (with my limited tools and balls to physically tear into this badboy) hardware issues.
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA App
Compatibility Mode
I also have this issue, therefore I just recently flashed my hd2 with Tytung's 4.0 ICS Rom. As expected, this didn't help very much.. What I am now going to try before I send my phone to HTC is to disable compatiblity mode. BUT, I can't seem to find this compatibility mode check anywhere. Could someone please guide me there?
..
Windows 7
I will be flashing my phone with w7 now, to see wether this is an android kernel bug / softare issue or if this relates to hardware. I also see a lot of people saying that after fixing the digitizer it works again, so it might actually be a hardware issue. I will post my feedback when I have tried with w7.
I just unbricked my HD2 from the white screen with no logo. I spent the whole day reading hunderts of post about the white screen- bricked HD2 - the solution was to change the mainboard (at least the official service did that) and the people mostly sold the phone as bricked, its maybe also an production problem with HD2 because it's caracteristic and usual for it.
I think the Radio ROM is the problem and that it's a hardware error caused by overheating(i will report if the problems occurs again but i think it works now).
How it began(STORY):
I went on a trip and used google maps and route66 with GPS/WIFI all the time. My OS was Android Nand ICS and it wasn't too hot. The first problems started with random white screen occurrences trought the day as i was using google maps so i took out the battery and restarted, it worket but soon after the white screen occurred again. The white screen occurrences became more often and at the end there was only the white screen. (people reported the the phone somtimes worked when they recharded the battery and left it alone for a few days, after that they flashed the new rom )
I used the ICS rom for a few months with no problems(same reported from other users).
One theory(i read it on the forum) that the ICS is constantly overheating the HD2 + route66 mabe it bricked because of it.
So there is no other way, it has to be an hardware problem but the good news is it can some kind of be fixed (because i think it caused an radio mailfunction) !
SOLUTION:
So this is the way how i solved it:
- I downloaded an old version of the stock HD2 WM rom(i found somewhere that it can fix the problem) so with radio.
- I extracted the .exe file with WinRAR(or 7z, winzp...) and renamed the RUU_Signed.nbh to LEOIMG.nbh
- I copied LEOIMG.nbh to my SD Card (they said it should max 4GB, and has to be FAT32)
- I entred the HSPL with Volume down + Power and it found the rom on the SD card i pressed Power to install it and it FAILED !!!!
- I was depresed again :|
- I keept reading and may owners had the same problem, someone suggested that the update worked for him after he left the phone in a bag in the fridge. I had no fridge in the hostel (and no SD card writer only the ROM on my SD card) so i tried it again AND IT WORKED !!!
After that i got a HTC screen that didn't boot. I flashed HSPL3 (also from the second try, flashing from HD2 tools(HSPL2) didn't work) and installed official WM from the HTC HD2 support and i think i will use it from now on (or WM7) .
After i did it once it didnt work(flashing from SD card) so i used this method:
- Entered the SPL/HSPL
- Flashed HSPL4 sometimes it does not work but you have to keep trying
- Task29
- Updated a stock WM6.5 from the PC !! (from the SD card didnt work(
- works
PS: If you see only the white screen when you turn it on you need to wait few days to get to the HTC seceen so a hardware error. Maybe try to put the battery and simcard out of the phone or put it in a plastic bag in a fridge ... maybe it will accelerate the process
So my theory:
- The overheading caused a hardware error that damaged the Radio ROM and the software(but how?).
- It's a producttion problem(may owners with the same problem)
- It mostly occurrs to android users - and mostly ICS
- As an engineer i have no idea why it works now but i like it
Ok i got a white screen with Windows Mobile 6.5 after few days (with android/W7 imidiently).
The problem occured when i was cooking almost 40 celsius.
Maybe the solution can be to put some cooling paste on the radio or similar thing
Cruonit said:
I just unbricked my HD2 from the white screen with no logo. I spent the whole day reading hunderts of post about the white screen- bricked HD2 - the solution was to change the mainboard (at least the official service did that) and the people mostly sold the phone as bricked, its maybe also an production problem with HD2 because it's caracteristic and usual for it.
I think the Radio ROM is the problem and that it's a hardware error caused by overheating(i will report if the problems occurs again but i think it works now).
How it began(STORY):
I went on a trip and used google maps and route66 with GPS/WIFI all the time. My OS was Android Nand ICS and it wasn't too hot. The first problems started with random white screen occurrences trought the day as i was using google maps so i took out the battery and restarted, it worket but soon after the white screen occurred again. The white screen occurrences became more often and at the end there was only the white screen. (people reported the the phone somtimes worked when they recharded the battery and left it alone for a few days, after that they flashed the new rom )
I used the ICS rom for a few months with no problems(same reported from other users).
One theory(i read it on the forum) that the ICS is constantly overheating the HD2 + route66 mabe it bricked because of it.
So there is no other way, it has to be an hardware problem but the good news is it can some kind of be fixed (because i think it caused an radio mailfunction) !
SOLUTION:
So this is the way how i solved it:
- I downloaded an old version of the stock HD2 WM rom(i found somewhere that it can fix the problem) so with radio.
- I extracted the .exe file with WinRAR(or 7z, winzp...) and renamed the RUU_Signed.nbh to LEOIMG.nbh
- I copied LEOIMG.nbh to my SD Card (they said it should max 4GB, and has to be FAT32)
- I entred the HSPL with Volume down + Power and it found the rom on the SD card i pressed Power to install it and it FAILED !!!!
- I was depresed again :|
- I keept reading and may owners had the same problem, someone suggested that the update worked for him after he left the phone in a bag in the fridge. I had no fridge in the hostel (and no SD card writer only the ROM on my SD card) so i tried it again AND IT WORKED !!!
After that i got a HTC screen that didn't boot. I flashed HSPL3 (also from the second try, flashing from HD2 tools(HSPL2) didn't work) and installed official WM from the HTC HD2 support and i think i will use it from now on (or WM7) .
So my theory:
- The overheading caused a hardware error that damaged the Radio ROM and the software(but how?).
- It's a producttion problem(may owners with the same problem)
- It mostly occurrs to android users - and mostly ICS
- As an engineer i have no idea why it works now but i like it
Click to expand...
Click to collapse
Hi, can u say which old WM version u used ? I dont have bricked hd2 but instead of this my lcd doesnt show anything in first stages of boot, i mean i cant see tricolor screen (but can get into this with buttons), cant see magldr or clk, cant see cwm or anything until android (hyperdroid) boots up. Then it works perfect. Of course even if I cant see anything it works fine in background, even more, i can go into cwm and by pressing buttons do everything but... cant see the menus (luckily got help on xda and i know menu structure). Anyway, I spoke to guy in mobile service point, who said that some time ago he had the same situation, his hd2 got exactly the same weird problem and he solved it my installing some old WM roms. Unfortunately it was long time ago and he didnt remembered versions. But he said it happened to him after playing with some 3rd party camera software and for him it was like lcd locked itself in specific resolution. I'm more than happy to try your solution if u can provide WM version u used, as i already tried few and... nothing. Thx
I used the newest version of WM 6.5 3.14 / 2.15.50.14 it worked for days(i have not used the phone but it was on without simcard). Afther few days i inserted the SIM card inside the phone and then after few minutes maybe half an hour the white screen appeard again
Now i will try the 1.66.405.2 version with 2.06.51.7 radio hope it works with the sim card or i will have a bad MP3 player
Problem still open
The phone works for days when i leave it in my room and don't use it (need to test it with a sim card).
But when i take it out in my pocket it just turns of and can't be turned on. I take the battery out and put it in and the famouse white screen appears and i can't flash it anymore (i can eneter the bootloader - voldown+power) but when i try to update the rom it hangs and restarts.
Had the same problem few times and the white screen disapears after a while(few days), the HTC logo appears and i can flash the phone again.
I have a feeling the phone is "more alive" when i use WM 6.5 old version (on android and WP7 the white screen appears after few minutes but i am not sure).
Next time(when the white screen goes away) i will try to flash WM6.5 and leave it with the simcard for a few days. If it does't go into white screen then it's a contact problem on the hardware (and it's triggered when i walk)
i tried to put it into the fridge but it did not work
i tried latest wm rom but it doesnt work, i can hear sound when its loaded but nothing on screen, pressing power off it just keeps black and then lights up display .... thats it. Weird but with android on board i works fine after boot sequence, just have to press power off 4times. Tried to load WM from SD card but for some reason I cant do it properly (heard thats only way to get rid of HSPL and have clean install), phone just hangs, maybe some error but my display is not showing anything at this point Starting installer from PC gives loads up WM rom succesfully, but as I mentioned before, screen just lights up, music is playing and ..... nothing. Maybe You can try this way ?
If not, you could try following :
using mtty do some task 2a and task29 then reinstall
or
try find someone who could plug JTAG into it and wipe everything
http://www.youtube.com/watch?v=XroEPU4qyuM
Mine is proably hardware, but why its fine on android and not with WM ?
It's definitely a hardware problem. When the whitescreen appears it can't be removed with flashing. i leave the phone for a few days off and than again the mobile phone boots without problems !
The phone works for days when i leave and don't touch it, but as soon as i put it in my pocket and wear it with me for about half an hour the screen gets white againt and the phone does't boot anymore(for days or more).
so definitely it's a circuit or component problem, I will try to fix it with hot air(to refresh the definitely or to break the pohone but i'ts my last solution)
Would a motherboard change help ?
Cruonit said:
It's definitely a hardware problem. When the whitescreen appears it can't be removed with flashing. i leave the phone for a few days off and than again the mobile phone boots without problems !
The phone works for days when i leave and don't touch it, but as soon as i put it in my pocket and wear it with me for about half an hour the screen gets white againt and the phone does't boot anymore(for days or more).
so definitely it's a circuit or component problem, I will try to fix it with hot air(to refresh the definitely or to break the pohone but i'ts my last solution)
Would a motherboard change help ?
Click to expand...
Click to collapse
Please help me, I have the same problem with my hd2 (white screen). I can not install anything on it. Tell me please, you solved the problem? Remove the battery when you leave a few days?
It just unfreezes at random. I found out that when installing windows mobile 6.5 and when it's winter that it works longer :|
For now it works when i install android it freezes after a day or two (in winter and almost imedietly in sommer)
Cruonit said:
It just unfreezes at random. I found out that when installing windows mobile 6.5 and when it's winter that it works longer :|
For now it works when i install android it freezes after a day or two (in winter and almost imedietly in sommer)
Click to expand...
Click to collapse
I haven't read your previous posts, but from your last post it seems that your motherboard is failing. A common issue with the HD2.
Marvlesz said:
I haven't read your previous posts, but from your last post it seems that your motherboard is failing. A common issue with the HD2.
Click to expand...
Click to collapse
i try to live with it Could "hot air" hack for short circuit help ? I will try it as soon as i find some one that has the "hot air" thing