Database Users

Which ROM, HSPL, Radio, Android version? Post YOUR combinations!

hey,
i am just interested what combination of rom, hspl, radio-rom and android version everyone of you is using. I am reading that some persons have no problems, other have big problem and they are using the same android version. So if you want to give everyone some information, just write down something like:
ROM – HSPL – Radio_ROM – Android_version – what is not working
If you don’t like the thread, you simple should not answer. But I think that people who have problems are interested, what combinations the persons have who are using android without problems.
My combinations:
Chuckydroidrom 5.8.10 – HSPL 2.08 – Radio 2.12.50.02_2 – Mattc1.4
everything works fine, but the market for example is still laggy (and I have the problems everyone has who is using mattc1.4)
sorry for my bad English, I am german and my last lesson is years ago

Artemis V25 FRA – HSPL 2.08 – Radio 2.12.50.02_2 – MattcFroyorc1.4
All features works as designed but huge latency sometime with the interface : phone blocked for 3 or 5 sec then I got control back.
When enabling audio speaking when calling sometime the call failed or the audio speaker is not working : I've to recall my contact.
thanks a lot for your work. I had a G1 before HD2 and I'm glad to experiment again the Droid adventure. This I couldn't not do without all the "Droid members" and "Linus Torvald".
Keep on going
Kind regards

After many tweaks and tries... I am 100% happy. NO ISSUES except camcorder of course.
It is rock solid, fast, and most of the time I forget this is not a "true" android loaded device.
HD2 T-Mobile US
AxLor DF1 XLITE (23128) ROM
Darkstone HD2 FROYO v1 Build
Cotulla 2.6.32.9#71 Kernal
Radio 2.10.50.28_2
HSPL 2
Android Loader v4.0
SetCPU 998 Max 614 Min
That's about it. Other than the system2.ext replacement for the GPS, there is nothing else.
Calls are loud and clear, no robot talk, data pulls from 3G and HSPSA and switches seemlessly between my WiFi spots I hit throughout the day.
Also, if it matters... in WinMo is have all switches on under Comm Manager. Data, Phone, 3G, WiFi. And Data Roaming is on in Android.
Loving it.
---
Sent from my HD2 DROID with XDA.

SicDroid
Could you possibly give me a link to
Cotulla 2.6.32.9#71 Kernal
AxLor DF1 XLITE (23128) ROM and
Android Loader v4.0
It would be appreciated, I'm trying combos and i would like to see how that works

mystik610 said:
I too suffered SOD on several different Android builds, ROMS, and Zimages.
I finally have a set-up where I'm not getting SOD anymore
Also, no robot voice (never had it), no 3G problems, and GPS works...though it takes a while to lock on my location (I know how to fix it, just haven't gotten around to it).
These settings are for TMOUS:
WM ROM: Chucky Rom
Radio Build: 2.12.50.02.2.
Android Build: darkstone
1GB userdata.img
Zimage: 08/02
I've been using Android consistently for 2.5 days. Battery life still sucks, but its reasonably fast, and very stable.
Click to expand...
Click to collapse
Here's the set-up I'm using now.
To expand on this a bit, I'm using a class 2 SD card. I have a class 10 in my Digital SLR, but would much rather keep that there.

llgtrainll said:
SicDroid
Could you possibly give me a link to
Cotulla 2.6.32.9#71 Kernal
AxLor DF1 XLITE (23128) ROM and
Android Loader v4.0
It would be appreciated, I'm trying combos and i would like to see how that works
Click to expand...
Click to collapse
Here are the links, I don't have my bookmarks restored yet so I can't find the link for the latest zimage... very important you use the 08/03 release (volume). It is posted around the forum.
ROM: http://forum.xda-developers.com/showthread.php?t=743464
FROYO Build: http://forum.xda-developers.com/showthread.php?t=735532
RADIO: http://www.megaupload.com/?d=89K700TT
GPS System2.EXT: http://rs117.rapidshare.com/files/409499714/system.ext2
Android Loader v4: http://forum.xda-developers.com/attachment.php?attachmentid=370121&d=1280534026
ZIMAGE: (VOLUME) 08/03
---
Sent from DROID HD2.
---
Sent from my HD2 DROID with XDA.

Chucky droid
2 10 50 26
latest shubCraft with cotulla #103
That works like a dream

Thanks SicDroid, greatly appreciated

llgtrainll said:
Thanks SicDroid, greatly appreciated
Click to expand...
Click to collapse
You bet.. just tried the FROYO Stone build. I am coming back to this one with a few tweaks.
.
Let me know how it works for you.
Sent from my HTC Desire using XDA App

[Q] Telstra T9193; Android Woes

Hi all,
Having a problem getting Android to run on my Telstra HD2. I do the following:
+ Run CLRCAD; all good
+ Run HARET; all good until -- 5 or 6 lines of the linux screen appear and then it hangs, or the screen goes blank depending on the Android build that I try running.
I have an Australian HD2 with the following specs:
Model: T9193 (Telstra)
OS: 5.2.21869
R: 2.07.51.22_2
G: 15.32.50.07u
D: 1.72.82124
I am using the standard SanDisk 16Gb Micro-SD card. I have tried a number of Android builds from gamesquare.co.uk with no luck.
Can anyone suggest what I need to do to get this running on the stock Telstra ROM?
Any help is greatly appreciated,
Peace..

Probably need to upgrade your rom
and radio. Look at some signatures of people who say their build is working good.

I didn't really want to upgrade the ROM and radio since it'd void my warranty..

RE: Telstra woes
I notice you are running 2.07.51 radio. I reckon it's your radio to be honest. I run 2.12.50.02_2 on mine. I have had problems with radios other than x.xx.50.xx radios. There is a link somewhere in here to all the working radios (I think in the definitive guide. Don't worry about warranty issues, if you ever need to deal with that, just flash back to the factory rom (but I take no responsibility .
Cheers

Definitely need to change the radio. You need a .50 radio. That also means you need to put HSPL on the phone. However, be aware that Android is not very stable yet. I couldn't get WiFi working and had all sorts of problems getting it to talk with Outlook. Went back to stock Rom highly modified (CHT etc)

Hmmm indeed the radio could be the problem. I use the 2.07.50.22_2 radio (although my G and and D values are also different from yours) and I've had no problems.
This way if anything catastrophically goes wrong with your phone and you're unable to flash the old radio back hopefully they won't notice
EDIT: Forgot about HSPL, thanks iandg.

Thanks for the replies.
I'm going to bite the bullet... I've just installed HSPL; no problems.. Now to find a radio update..

iandg said:
Definitely need to change the radio. You need a .50 radio. That also means you need to put HSPL on the phone. However, be aware that Android is not very stable yet. I couldn't get WiFi working and had all sorts of problems getting it to talk with Outlook. Went back to stock Rom highly modified (CHT etc)
Click to expand...
Click to collapse
really? you had that much problems with it dude? I'm still a noob here but I must say that I'm having a really good experience with it at the moment.
My config seems to be working pretty good. Try this....
ROM is NRGZ maxsense rom:
http://forum.xda-developers.com/showthread.php?t=591784
Radio:
2.12.50.02_2
Android build is [BUILD][25.08.2010][mattc Leo + Froyo w/Sense 1.6b][Kernel: michyprima 2.6.32.9 #70]:
http://forum.xda-developers.com/showthread.php?t=736545
I have actually been using this as my main OS for the last 2 builds and it is really usable now. I have it syncing direct to my outlook server at work no probs at all (IT have hijacked it with security policies, but this is understandable). Other than that I reckon the DEVs here are absolute geniuses with how well this stuff is running.
Hope this is of some help

e1design said:
Thanks for the replies.
I'm going to bite the bullet... I've just installed HSPL; no problems.. Now to find a radio update..
Click to expand...
Click to collapse
e1design, I have the same phone in the States on AT&T. Feel free to use my links below in my sig to get what I'm using. It works just fine. I haven't been on WinMo in weeks.

Done
Firstly, thanks for the replies in this thread.
I have to say that I've read it many times before: "Try the search function" - well it works wonders. With the information posted in thtis thread I was able to piece it all together and I now have Android on my HD2!
There are still a couple of things to iron out [WiFi, battery life and such] but in all a very worthwhile exercise.
Thanks again to the thread responders, and if you're in the same place as I was a week ago wanting to get Android on your HD2 - search on the keywords in this thread and you'll find it's as easy as can be.

Androis on T9193
Am totally thrilled to learn Android can be installed on the T9193.
Where are the best locations to source ROMs?
Suggestions on which are better and why?

Steps to Android..
Look at my sig and go from there..

I know I'm reviving an old thread here, but I'm wondering if any of you using a Telstra HD2 on AT&T (Cingular for me) here in the US have a stable Android install? I've been struggling with this for a long time now. I love Android but I can't get a configuration that will run longer than about 10 hours most of the time. I've gone through all the radios from 2.12.50.02_2, 2.14.50.02, and 2.15.50.14. I've switched my Windows Mobile ROM from Dutty CDLC v15 to OzDroid v1.11, I've switched my Android build from mattc froyo sense v1.8 to froyostone sense v3.2. I've gone through a couple different Linux kernels, currently on hastarin #8. No matter what I do I end up with about a 10 hour life before the device hangs. I have seen improving PPP performance with the different radios and kernels, but the overall device stability is the biggest problem. Could anyone using the Telstra HD2 for Android please post the configs that worked from them on their devices and include what kind of uptime you've achieved? I'm hoping this would really help me. Thanks in advance.

Ok For me I have the telstra HD2 and this is my Config.
Pretty much the latest of everything
- MAGLDR1.13
-Latest HSPL
-TyphoonN_CM7_v2.4.4.zip
- Radio 2.15.50.14
- Clockwork mode recovery v1.3
Just follow this: http://forum.xda-developers.com/showthread.php?t=933951
Hope that helps.

best wm + android combo package

hi all seen as we cant just run android by its self can i ask please what is the best sense version of android available to date, im looking for a none o/ced version as i dont wanna kill my cpu also what is a good base wm rom to run with it that is issue free when they run back to back, as i get slow screen bootups when unlocking and all sorts of random problems with android at the moment but i have to say i prefer android over wm for now so id really like to run android as main rom on my hd2 or im gona have to sell it and buy a htc android version
thank you

did you even do any research? nothing is going to be handed to you on a silver platter

I have been using this combo with only one issue and thats my accelerometer not working. I've searched (you people go ahead and say I haven't but I have) but to no avail I can't seem to get it to work but other than that everything works fine. Calls, GPS, Syncing, Web Browsing, WiFi everything but accelerometer like I said. Good luck on finding your best combo. I know alot of people like Using Chucky ROM for WinMo and they're choice of Android.
Winmo ROM - |MULTI LANG|LEO|¸¸.·´¯`·.¸¸.- Energy -.¸¸.·´¯ |Sep 14| 21916||23138 | Sense 2018 |
Android - Darkstone HD2Froyo V2.1
Radio 2.12.50.02_2 with newest zimage

Chuckydriodrom for the base and darkstone froyo sense for HTC sense android
But I'd reccomend the latest hyperdriod instead.
Use radio 2.12.50 or 2.10.50
Sent from my HTC HD2 using XDA App

sell it and get an android phone.. android is great and i love it on my hd2, but its not anywhere near complete and ready to use out of the box.
but if you want to try
im using this rom, with 2.12.50 radio
http://forum.xda-developers.com/showthread.php?t=651729
i like the way it looks and sometimes i switch back to winmo..
this build
http://forum.xda-developers.com/showthread.php?t=773790
with this kernel
http://forum.xda-developers.com/showthread.php?t=756513
im using the N one with overclocking and undervolting, but use the NN one with stock speeds and volts.
you have to write all the ko files to system/lib/modules.. might have to delete a ringtone or two to fit them all in.
i get no screen freezes, no pauses when unlocking and my battery is pretty good.. currently at 7hrs 53min with 63% left..
my usage is medium..
about 100 texts, 5 or so 10+ minute calls and i ran pandora for about 20 minutes.

thank you people i will try these and i might need help with the kernel but ill try it out and then come bk if i do

aarons6 said:
sell it and get an android phone.. android is great and i love it on my hd2, but its not anywhere near complete and ready to use out of the box.
but if you want to try
im using this rom, with 2.12.50 radio
http://forum.xda-developers.com/showthread.php?t=651729
i like the way it looks and sometimes i switch back to winmo..
this build
http://forum.xda-developers.com/showthread.php?t=773790
with this kernel
http://forum.xda-developers.com/showthread.php?t=756513
im using the N one with overclocking and undervolting, but use the NN one with stock speeds and volts.
you have to write all the ko files to system/lib/modules.. might have to delete a ringtone or two to fit them all in.
i get no screen freezes, no pauses when unlocking and my battery is pretty good.. currently at 7hrs 53min with 63% left..
my usage is medium..
about 100 texts, 5 or so 10+ minute calls and i ran pandora for about 20 minutes.
Click to expand...
Click to collapse
ok matey i think i have it but let me know before i start, i do this right
- task29 + Radio_2_12_50_02_2
- install wm rom of choice
- copy all .ko files into the android rom i downloaded and replace the one file thats already in folder and then let the rest also jump over to the modules folder
- then copy android rom with these files to SD card and boot it up
is this correct or do i run the android rom first then replace the .ko files

ok im gona guess that copying the ko files all into the modules folder and then booting the android rom for the first time was wrong as cpu was still overclocked so im gona try copying the rom to sd card then, running it to let it configure for first time then go back to wm and copy all the files to that folder... is this correct ??
edit i downloaded this one "This is my pure kernel as usual. No changes." is this correct
heres picture to help me, this is before i copied the ko files
Uploaded with ImageShack.us
and this is after are they all in right place and ok ?
Uploaded with ImageShack.us
EDIT : after all this quadrant still shows max cpu freq as 1190.4mhz WHY

please help me people
HTC HD2 - FROYOSTONE SENSE V2

I'm running the NRG WM / NRG Android combo and end up using android 99% of the time now its so stable! Only issue I have is that everything from Marketplace installs to 'internal memory' (which is on the SD card of course but it doesnt recognise it as such!) so I run out of install space occasionally and have to uninstall stuff!

Goatrip & Hyperdroid v1.2, so far no problems and good battery usage.

[Q] T-Mobile US HD2 rom help needed

Hi guys im new to this phone
im coming from Android background and planning to use android as well in my T-Mobile US HD2 as the main OS most probably im not going to use Win Mob 6.5
Here are the details of my phone
OS Version 5.2.21913 (21913.5.0.94)
Manila Version 2.5.20181424.0
ROM Version 3.14.531.1 (04666) WWE
ROM Date 09/29/10
Radio Version 2.15.50.14
Protocol Version 15.42.50.11U
So what is the suitable androim rom for this phone and
what are the things i need to update before running Android
Im planning to use Android 2.2 with Sense UI (Desire HD rom probably)
and I do have a 4GB Class 4 Kingston memory card as well
guys help me out installing android on this phone

just a suggestion, start with a non HD builds like mdj 1.7. It works well for me.
also, might want to try bare wm you have HSPL.

jose makalolot said:
just a suggestion, start with a non HD builds like mdj 1.7. It works well for me.
also, might want to try bare wm you have HSPL.
Click to expand...
Click to collapse
how about this rom http://forum.xda-developers.com/showthread.php?t=859817
I have this HSPL 2.08.HSPL.
and above mentioned radios and rom do i have to anythn before running android?

agarp said:
how about this rom http://forum.xda-developers.com/showthread.php?t=859817
I have this HSPL 2.08.HSPL.
and above mentioned radios and rom do i have to anythn before running android?
Click to expand...
Click to collapse
if you want to go directly to desire HD builds then that is your prerogative, but don't whine if ever it lags.
You have HSPL with stock rom? May I know the link of the particular winmo rom you used?

jose makalolot said:
if you want to go directly to desire HD builds then that is your prerogative, but don't whine if ever it lags.
You have HSPL with stock rom? May I know the link of the particular winmo rom you used?
Click to expand...
Click to collapse
i bought it from another guy and im using the one came with the phone so i dont have any links
i tried tht build and its not tht usable at the moment so cant you suggest me a very good stable rom also i need normal speed n good battery life and of course with Sense UI

agarp said:
i bought it from another guy and im using the one came with the phone so i dont have any links
i tried tht build and its not tht usable at the moment so cant you suggest me a very good stable rom also i need normal speed n good battery life and of course with Sense UI
Click to expand...
Click to collapse
The following WM6.5 and Droid Builds work really well for me, just make sure you re-format the sd card on the WM rom and also change the screen time-out to 'never' before booting from the droid folder. The ROM and Build links are below:
WINMO ROM:
http://htcpedia.com/kwbr_HD2_com3/so...om.html?page=1
DROID BUILD:
http://forum.xda-developers.com/showthread.php?t=793924
Hope you find it as good as I have, just make sure to HSPL before-hand, this is the Nexus One droid build and i've only had one small problem with hearing people on calls, but that fixed itself after a couple of uses. The build is very stable and reliable and also battery life is good (No outstanding BUILD is the best for battery as it really depends on the RADIO you use) .

norodaigh said:
The following WM6.5 and Droid Builds work really well for me, just make sure you re-format the sd card on the WM rom and also change the screen time-out to 'never' before booting from the droid folder. The ROM and Build links are below:
WINMO ROM:
http://htcpedia.com/kwbr_HD2_com3/so...om.html?page=1
DROID BUILD:
http://forum.xda-developers.com/showthread.php?t=793924
Hope you find it as good as I have, just make sure to HSPL before-hand, this is the Nexus One droid build and i've only had one small problem with hearing people on calls, but that fixed itself after a couple of uses. The build is very stable and reliable and also battery life is good (No outstanding BUILD is the best for battery as it really depends on the RADIO you use) .
Click to expand...
Click to collapse
Thnxx alot for ur info
so i started using MDJ FroYo Sense Clean v. 2.4
and i think it works well but with battery drain issues.
Also btw is there any real benefit installing that Win Mob rom cz im planning to use only Android

agarp said:
Thnxx alot for ur info
so i started using MDJ FroYo Sense Clean v. 2.4
and i think it works well but with battery drain issues.
Also btw is there any real benefit installing that Win Mob rom cz im planning to use only Android
Click to expand...
Click to collapse
Even though your going to be using droid all the time anytime you switch off the device, without a bootload option between WM and DROID you will always need a WM ROM to use as a platform to boot droid.
The ROM i use is a very low-key ROM and dosnt take up that much memory.
Plus the RADIO is what ultimately makes the good data connections and battery power etc so you will need both.
The way I have my build the droid battery drain issue is minimum (in my experience) to other builds, its stable, fast and it works well. Just make sure to install LauncherPro once you boot er up.
Just remember though if you restart your phone for any reason it will go back to the WM ROM on boot-up unless you have a BOOTLOADER installed so you can choose between either.
Hope this helps

norodaigh said:
Even though your going to be using droid all the time anytime you switch off the device, without a bootload option between WM and DROID you will always need a WM ROM to use as a platform to boot droid.
The ROM i use is a very low-key ROM and dosnt take up that much memory.
Plus the RADIO is what ultimately makes the good data connections and battery power etc so you will need both.
The way I have my build the droid battery drain issue is minimum (in my experience) to other builds, its stable, fast and it works well. Just make sure to install LauncherPro once you boot er up.
Just remember though if you restart your phone for any reason it will go back to the WM ROM on boot-up unless you have a BOOTLOADER installed so you can choose between either.
Hope this helps
Click to expand...
Click to collapse
im planning to stick with android sense rom wat u hv mentioned is tht no sense rom ryt
ill try to install the low memory n process using win mob 6.5 rom
wat u hv is the international hd2 rom ryt will it work with t-mobile US hd2 device

[Q] Best Sense Rom for Stability and Battery Life? This is for my GF.

Hey guys. Just bought an HD2, have flashed android 4.0 alpha on it, but I wanna give this phone to my girlfriend who lives in another state. She currently has a Mytouch Slide and I want to put a sense Rom on this phone because that's what she is familiar with. However I wanted to know what the most stable Sense Rom with the best battery life is? Is prefer a Sense 3.0 Rom but any version of Sense is fine. She doesn't use mobile web , only WiFi, and she usually texts and calls with it, very light app usage, if that helps describing her habits. Appreciate the input!

Flash this CLK bootloader in the right partition layout and follow instructions.
http://forum.xda-developers.com/showthread.php?t=1114053
After that flash clockwork mod 5.2.0.6.
http://forum.xda-developers.com/showthread.php?t=987531
Partition your Sd card with a 1024mb Ext4 partition... you can do that with clockwork mod.
And flash this rom.
http://forum.xda-developers.com/showthread.php?t=908528
Most stable rom out there.... for daily use.
The advantage of CLK is that your HD2 boots like a native android.
So your girlfriend can't touch anything of the bootloader etc.
For any info take a look at this thread.
http://forum.xda-developers.com/showthread.php?t=1336700
good luck

As the post above said, I personally find Android 2.2 with Sense 2.0 the most stable and fastest type of ROM out there. Perfect for daily use and if your girlfriend isn't bothered about having the latest version of Android

speedysilwady said:
Hey guys. Just bought an HD2, have flashed android 4.0 alpha on it, but I wanna give this phone to my girlfriend who lives in another state. She currently has a Mytouch Slide and I want to put a sense Rom on this phone because that's what she is familiar with. However I wanted to know what the most stable Sense Rom with the best battery life is? Is prefer a Sense 3.0 Rom but any version of Sense is fine. She doesn't use mobile web , only WiFi, and she usually texts and calls with it, very light app usage, if that helps describing her habits. Appreciate the input!
Click to expand...
Click to collapse
the best sense rom according to me !!
ROM : http://forum.xda-developers.com/showthread.php?t=1326217
KERNEL : http://forum.xda-developers.com/showthread.php?t=1360688
also flash the v6 kernel immediately without restarting the phone !!
flash both the rom and the kernel nd restart !
good luck !!

Thanks guys ill try both Roms for a couple days and see which I like more. She doesn't care to be on the latest version, but I personally prefer sense 3.0 or 3.5 cuz that's what I have on my sensation.

speedysilwady said:
Thanks guys ill try both Roms for a couple days and see which I like more. She doesn't care to be on the latest version, but I personally prefer sense 3.0 or 3.5 cuz that's what I have on my sensation.
Click to expand...
Click to collapse
good luck with it mate ! !!
you may also try this one !! http://forum.xda-developers.com/showthread.php?t=733649 !
the rom is cooked on runnymede base !!
one of the best sense roms !! !!
happy flashing !!
cheers !!

SensationXL based ROM onHD2
Hello,
when i tthe first run after the instalation of the SensationXL based ROM from Energy im stuck witch the Animation.
And nothing is possible just pull out the battery. Haye anyone of you an idea what i could do fix this

Check clk partition sizes, make sure you have flashed a clk (and sense) compatible kernel. First boot can take up to 10 mins.

hermes288 said:
Hello,
when i tthe first run after the instalation of the SensationXL based ROM from Energy im stuck witch the Animation.
And nothing is possible just pull out the battery. Haye anyone of you an idea what i could do fix this
Click to expand...
Click to collapse
Completely useless unless you give us more information, and wasting space seeing as you clearly haven't searched first.