Related
borked up the fascinate whilst trying to update to the devs 2.2.
i know exactly what i did wrong. i was running voodoo5, and i clicked to disable lag fix, but i forgot to restart to let it *actually* disable before trying to load the new stuff. STUPID!
when that happened, it hung on samsung screen, then after battery pull all the phone will do is boot loop.. samsung screen, then goes to robot and screen says says "wiping cache, data, ect.." and then back to samsung screen to reboot and reboot.
i have literally 30 tabs open with articles from here and other forums, nothing seems to be working. here is what i have tried.
1. tried booting back to red cwm and playing with the lagfix (enable and disable again) to see if it would work, no go. i ended up losing red cwm - had to ODIN red back.. i cant get green to flash.
2. tried flashing DL09 both the full package and each individual part via ODIN
3. tried flashing the stocki500system.md5 (from the board) and kernel via ODIN, and nothing.. same boot loop. everything i have flashed via ODIN still gives me a boot loop..
4. tried to connect via ADB but it wont let me access the phone.. NOTE: i just downloaded ADB as a last resort and know nothing about it..
the only thing i can seem to do is get to red cwm. i have several backups in the restore section, but none of them seem to work - either i get a "no file found" even though i can see the file(s), or i get an error after it does load that says ".android_secure.img not found. skipping restore of /sdcard/.android_secure"
any ideas?
Okay follow these steps. Make sure you follow them step by step. Even though you have the lagfix installed this removed it for me.
http://forum.xda-developers.com/showthread.php?t=782204
Place the PIT file where it belongs. Then ODIN the system, kernel, and recovery in that order. Don't restart the process every time. Just ODIN them one after another.
thank you very much for taking a moment to answer. i did follow that thread, however
i managed to get the stocki500 recovery but the other files (recovery, PIT) are all 404 not found errors.
ive tried that stock md5 and it still boot loops. i actually have that tab open from when i tried that route..
any other ideas and thanks again
Thats why its not working. Try this restore by adrynalyne. The file is there and everything is in one. Just ODIN in the PDA section. This should work.
http://forum.xda-developers.com/showthread.php?t=867648
I got myself into a bit of pickle too. Kept getting errors on the new_cwm file. After numerous attempts. I figured out the file hadn't downloaded correctly and the archive was damaged. Folks who havent installed Froyo yet, do yourself a favor and check the files before you save it to your sd card.
BSayre18 said:
Thats why its not working. Try this restore by adrynalyne. The file is there and everything is in one. Just ODIN in the PDA section. This should work.
http://forum.xda-developers.com/showthread.php?t=867648
Click to expand...
Click to collapse
downloading now.. thanks for the point to this file.. i hadnt found that one yet
no problem. it should work out good.
mailaliasgar said:
I got myself into a bit of pickle too. Kept getting errors on the new_cwm file. After numerous attempts. I figured out the file hadn't downloaded correctly and the archive was damaged. Folks who havent installed Froyo yet, do yourself a favor and check the files before you save it to your sd card.
Click to expand...
Click to collapse
i soft bricked doing that with a corrupt file before.. however that time i was able to restore using my backup.
this time, every time i try a method, it kicks me back to boot loop. if the file that im downloading now doesnt work, i will have to try and figure out ADB as a last resort..
thanks much for the help!
BSayre18 said:
no problem. it should work out good.
Click to expand...
Click to collapse
problem
thank you for all your help
mrjake1970 said:
problem
thank you for all your help
Click to expand...
Click to collapse
So this worked for you? You just re-rooted as normal?
def
Thank you all for your help. i applied all the info i got here, and one of them worked it finally took the ODIN flash to stock and i recovered into FROYO from there.
seriously thank you all.. its great that the community is so supportive
I did the exact same thing a couple of days ago, and recovered a similar way, odin back to D101, flashed DL09 & superclean, then restored a backup, then disabled voodoo and finally flashed DL30. I've got a couple of questions.
1: Is voodoo completely off my phone or is it just disabled (is there a difference)? When I apply update.zip from the blue recovery I get green cwm.
2: Each time I backup, restore, flash a different rom I apply update.zip, then from green recovery I flash "new_cwm.zip". Is this necessary?
Joe T said:
I did the exact same thing a couple of days ago, and recovered a similar way, odin back to D101, flashed DL09 & superclean, then restored a backup, then disabled voodoo and finally flashed DL30. I've got a couple of questions.
1: Is voodoo completely off my phone or is it just disabled (is there a difference)? When I apply update.zip from the blue recovery I get green cwm.
2: Each time I backup, restore, flash a different rom I apply update.zip, then from green recovery I flash "new_cwm.zip". Is this necessary?
Click to expand...
Click to collapse
i followed all the hints i got, and i think that the one i got about formatting helped me get out of the boot loop from hell.. it finally took my flash from ODIN, it wouldn't until i did the format(s)..
mind you i am NOT an expert, however from what i read and talked about offline, voodoo is still resident on your phone but disabled (check to see if you have the voodoo file still on your card).. if DL30 is running fine, you are ok..
from what i have read, yes.. the new cwm is required in order to get it to mesh properly with 2.2 leak.. i havent had any issues and i loaded that as well.. from one of the posts i read, if you are a serial flasher, then you need to make sure that not only you download the new cwm zip, but also should have deleted the entire clockworkmod folder from your card for best results..
I love this threadd.... I did the same damn thingg...
Sent from my SCH-I500 using XDA App
You guys are not alone. I'm just glad the peeps that know what's going on have the patience to put up with us.
Sent from my SCH-I500 using XDA App
adrynalyne's di01 odin package covers a multitude of sins.
upsidedownaaron said:
adrynalyne's di01 odin package covers a multitude of sins.
Click to expand...
Click to collapse
It will literally bring any phone back from the dead as long as its a software issue. I recommend keeping the di01 package, samsung drivers and Odin 1.3 on your computer at all times...
Sent from my SCH-I500 using XDA App
godihatework said:
It will literally bring any phone back from the dead as long as its a software issue. I recommend keeping the di01 package, samsung drivers and Odin 1.3 on your computer at all times...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
ABSOLUTELY!! I have those on my computer at all times, adrynalynes d101 brought me back a few times.
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
I am stock at tmobile screen, it doesnt go any further
i went in recovery it returns as
E:Can't Mount /cache/recovery
all the way down
the "fastboot erase recovery" returns with "FAILED (remote: not allowed)" and the "fastboot flash recovery recovery.img" returns the same thing. Any other suggestions???
I tried to restore pd15img and
it works little bit, and it asked me to upgrade, i pressed the volume up
1 BOOTLOADER - Fail-PU
partiton update fail!
update fail!
This has happened to quite a few people lately and I don't think they have been able to come back from it. Out of curiosity though, what caused this? Were you flashing something and this happened? Do you have the engineering bootloader? Attached is a thread of someone with the same problem, and like I said, there are a couple more out there.
http://forum.xda-developers.com/showthread.php?t=984790
I change roms many times, and recovery many times, this time i had been using 3.006 modified with battery charge.
didnt have a problem until i put the royalglacior 1.5 version.
than i could use the wifi, it gave me an error, i rebooted few times, and always error, and finally gave up.
I had the same fastboot errors when trying to flash from 3.0.0.5 to 2.5.1.2 after i mistakenly flashed 2.5.1.2 when i had cm7. You may need to update your sdk. I had to install my HTCdrivers on a new box and Download the tools folder from here http://forum.xda-developers.com/showthread.php?t=928370 to get it working.
theghazi said:
I change roms many times, and recovery many times, this time i had been using 3.006 modified with battery charge.
didnt have a problem until i put the royalglacior 1.5 version.
than i could use the wifi, it gave me an error, i rebooted few times, and always error, and finally gave up.
Click to expand...
Click to collapse
First, there is only RoyalGlacier v 1.2 as of the latest for now. Since you used that CWM 3.0.0.6 while battery charge off, there is a chance it might have reverted back to CWM 3.0.0.5 and RoyalGlacier requires 3.0.0.6 and stock restore requires 2.5.1.4 but your recovery may be 3.0.0.5. Try flashing a ROM that just requires 3.0.0.5. For future reference, use this version of CWM 3.0.0.6 from here (http://forum.xda-developers.com/showthread.php?t=944681). That sticks and never reverts back to .5.
Thanks for replies, n advices.
I have tried every which way possible to put the recoveries, and all failed.
I have had 3.0.0.6 modified for a while. was not going back and forth with 2.5.1.4
anyone else come out of this mess,
if not is there a way to get it to even at s - on and unroot?
I dont think so, but worth to ask
thanks
I'm having the same issue where it gets stuck at the Tmobile spash screen and when i boot into clockwork, it gives me the cache error. Formatting it through clockwork doesnt work, and when i try to restore it it also give me an error. I tried to format through adb but that hasn't worked either, unless I'm typing in the command wrong
I dnt believe there is a way to fix that issue,i had that issue awhile back on my 1st mytouch 4g,i had cm7 & made the mistake of tryin to nandroid restore a backup which I forgot was stocked froyo & everythin flashed ok but got stuck in bootloop,so battery pulled went to recovery & had all those errors u mentioned & never found a fix.....called tmobile,got a replacement no problems 2 mnth later & warranty still there..... Now I have clockwork 3.0.0.6 & havent ran into that issue yet,goodluck let us knw if u find a fix....
Permrooted s=off-MyTouch 4g-White
Eng-0.85.2007
Rom-RoyalGinger
I like balls
I am not using tmobile. I know it is covered under HTC but wont they refuse if they see s off?
Sent from my HTC Glacier using XDA App
theghazi said:
I am not using tmobile. I know it is covered under HTC but wont they refuse if they see s off?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Im not really to sure,a friend of mine had the same issue & went thru HTC & got a replacement so want im guessin is they dnt care but dnt hold it against me,it could of been 1 of those lucky times. All he said was that the phone wnt boot & they just sd it was a known issue & sent him another one...
well I think I've successfully bricked my mt4g. It was working fine until I installed the latest clockwork version and RoyalGinger, tried to restore some applications + data with mybackup root but it froze. Then it was stuck on a bootloop, went back into clockwork and started getting the "can't mount cache" errors. Now it's stuck on the T-Mobile splash screen if I try to do a normal boot, bootloader works and it also goes into clockwork, but it's not able to do any factory resets/wipe. Tried the factory image file and it fails on the first 5 or 6 items, skips another item and hangs at flashing the radio. Now it needs to be replaced and T-Mo is out of stock of the red mt4g's, so I have to wait until they have stock of red ones, then it's going to suck if I get one with a bad screen. I got offered a black one, but I just like my red one too much.
did you include the part file when flashing the PD15IMG.zip?
"there needs to be part7backup-1294463706.bin file on your sd card with the PD15IMG.zip file...both on the root of sd card."
I'm thinking that the file comes stock on the sdcard, but when we format our sdcard it wipes it. I know I personally ran the PD15IMG.zip file twice on my phone and both times it worked great, but both times I did it before I wiped my sdcard (and I do remember a ridiculous amount of extra stuff on the sdcard when it came with the phone).
darinmc said:
did you include the part file when flashing the PD15IMG.zip?
"there needs to be part7backup-1294463706.bin file on your sd card with the PD15IMG.zip file...both on the root of sd card."
I'm thinking that the file comes stock on the sdcard, but when we format our sdcard it wipes it. I know I personally ran the PD15IMG.zip file twice on my phone and both times it worked great, but both times I did it before I wiped my sdcard (and I do remember a ridiculous amount of extra stuff on the sdcard when it came with the phone).
Click to expand...
Click to collapse
That part7-xxxxx.bin file is created when u root with the gfree method,it doesnt come stock on the sd card... what method did u use to root...dnt use unlockr.com methods,its old & doesnt give true oerm root...
I made an assumption, i just used the basic root.sh script so I didn't read into the gfree method (see no need). I just know that people who have had trouble reverting to stock with the PD15IMG.zip fixed the issue by putting that part7backup file on the root of their sdcard.
darinmc said:
I made an assumption, i just used the basic root.sh script so I didn't read into the gfree method (see no need). I just know that people who have had trouble reverting to stock with the PD15IMG.zip fixed the issue by putting that part7backup file on the root of their sdcard.
Click to expand...
Click to collapse
gfree method would of gave u S off & that backup file,really I dnt think theres a fix for that just yet,without that file..... For future reference never restore data fron any backup app(ex.titanium,astro erc) u can only restore apps cause then u restorin data from a different rom & tryin to put it on a current rom that probably isnt the same...
cmdmilitia13 said:
gfree method would of gave u S off & that backup file,really I dnt think theres a fix for that just yet,without that file..... For future reference never restore data fron any backup app(ex.titanium,astro erc) u can only restore apps cause then u restorin data from a different rom & tryin to put it on a current rom that probably isnt the same...
Click to expand...
Click to collapse
no idea where this is coming from. I was just offering a suggestion to the op. As you can clearly see I am not the op. I do not have issues. I simply made an assumption about the gfree method, which was cleared up, though I still think it's a very real possibility that the op didn't put the part7 file on the root of his sdcard when he flashed the pd15img.zip. Either way, I thank you for your advice, but I'm not the one seeking it here.
darinmc said:
no idea where this is coming from. I was just offering a suggestion to the op. As you can clearly see I am not the op. I do not have issues. I simply made an assumption about the gfree method, which was cleared up, though I still think it's a very real possibility that the op didn't put the part7 file on the root of his sdcard when he flashed the pd15img.zip. Either way, I thank you for your advice, but I'm not the one seeking it here.
Click to expand...
Click to collapse
My fault I should of double read,i have an issue with just skimmin thru things & look what happens lol...
Has anyone found a fix for this? Same issue.
Isubbie said:
Has anyone found a fix for this? Same issue.
Click to expand...
Click to collapse
nope nothing yet,not that I knw off...
i installed a rom (royal ginger), it loads but after it loads it reboots the phone and does the same thing all over again, i rent to recovery to do a full wipe and re install and it comes up with "E: Cant open /cache/recovery/log" and some more errors, how do i fix this problem? i hope i havent bricked my phone
lanceydavid said:
i installed a rom (royal ginger), it loads but after it loads it reboots the phone and does the same thing all over again, i rent to recovery to do a full wipe and re install and it comes up with "E: Cant open /cache/recovery/log" and some more errors, how do i fix this problem? i hope i havent bricked my phone
Click to expand...
Click to collapse
What exactly did u do to get that error??? Did u wipe data,cache,delvik & format system,i always format sd card also in case the sd card has a currupt file... did it automatically give the errors once u flashed?? Did u check the mdsum on the file to make sure u had a full zip file??? What recovery did u use 3.0.2.4 or 3.0.0.6??Sorry need to ask questions in order to help lol.... Ive heard of people fixin their phones with the part7backup-xxxxx.bin file & the pd15 file....just stick those to the root of the sd card go into recovery & let the phone to its thimg..
@cmdmilitia13 Thanks so much for even trying to help! i have clockworkmod recovery 3.0.0.5 .... i flashed, worked perfectly, installed the rom the last night, woke up in the morning, phone wouldnt turn on, took out battery, and when it finally loaded, it kepts rebooting back to the loading screen.... i went back to recovery, tried to wipe data and cache, wont work, did delvik, and didnt say if it was successful or not but i formatted sd card, as soon as i try to format system it says:
E: Cant mount /cache/recovery/command
E: Cant mount /cache/recovery/log and etc.
as soon as i try a wipe it says the similar
lanceydavid said:
@cmdmilitia13 Thanks so much for even trying to help! i have clockworkmod recovery 3.0.0.5 .... i flashed, worked perfectly, installed the rom the last night, woke up in the morning, phone wouldnt turn on, took out battery, and when it finally loaded, it kepts rebooting back to the loading screen.... i went back to recovery, tried to wipe data and cache, wont work, did delvik, and didnt say if it was successful or not but i formatted sd card, as soon as i try to format system it says:
E: Cant mount /cache/recovery/command
E: Cant mount /cache/recovery/log and etc.
as soon as i try a wipe it says the similar
Click to expand...
Click to collapse
Royalginger requires recovery 3.0.0.6 or 3.0.2.4....3.0.0.5 was mainly for cm7 but clockwork updated to flash froyo & gingerbread now... I believe u can dwnload a cm7 rom to the sd card frm the pc then try to flash that if that dnt wrk then if u rooted by using gfree method & have the 0.85.2007 bootloader it should of created a part7xxxx.bin file & that will help unrootin the phne & startin frm scratch again...
Theres a couple threads on here that could help u out,ur not fully bricked tho... I had this issue about 3 months ago when there barely was a fix now at least u have a chance..
i have the 0.86.0000 bootloader, will that be a problem? if not if i google how to unroot i should be able to find it easily?
i also downloaded cm7 tried to install, and the same rom and issues still pop up, so i guess my only choice is to unroot, but how do i unroot without using terminal?
lanceydavid said:
i also downloaded cm7 tried to install, and the same rom and issues still pop up, so i guess my only choice is to unroot, but how do i unroot without using terminal?
Click to expand...
Click to collapse
I believe u need to have that 0.85.2007 bootloader but look around the Q&A threads & look for the subjects that says bricked or I think im bricked,those would help u out,im headin to wrk so cnt helo u now sorry...
lanceydavid said:
i also downloaded cm7 tried to install, and the same rom and issues still pop up, so i guess my only choice is to unroot, but how do i unroot without using terminal?
Click to expand...
Click to collapse
If you rooted with gfree, go back to the thread that guided you. It has instructions on how to unroot. Basically you want to place part7backupxxxxxx.zip on the root of your SD, download PD15IMG.zip, place on root of SD, then load bootloader and let it do it's thing, responding when prompted. If you can't mount the card you're going to have to find a way to mount it outside of the phone, either with an adapter or a card reader.
darinmc said:
If you rooted with gfree, go back to the thread that guided you. It has instructions on how to unroot. Basically you want to place part7backupxxxxxx.zip on the root of your SD, download PD15IMG.zip, place on root of SD, then load bootloader and let it do it's thing, responding when prompted. If you can't mount the card you're going to have to find a way to mount it outside of the phone, either with an adapter or a card reader.
Click to expand...
Click to collapse
Doesnt he need the eng 0.85.2007??
cmdmilitia13 said:
Doesnt he need the eng 0.85.2007??
Click to expand...
Click to collapse
Nope. I'm on 86 and have rooted and unrooted this phone about 30 times helping people and trying stuff.
Sent from my HTC Glacier using XDA App
cmdmilitia13 said:
Doesnt he need the eng 0.85.2007??
Click to expand...
Click to collapse
You need the engineering bootloader to use adb, both will run the PD15IMG.zip.
darinmc said:
You need the engineering bootloader to use adb, both will run the PD15IMG.zip.
Click to expand...
Click to collapse
Thanks good to knw,i just thought u needed it since everyone talks about it...
cmdmilitia13 said:
Thanks good to knw,i just thought u needed it since everyone talks about it...
Click to expand...
Click to collapse
The reason we talk about is pretty simple. .85 allows you to use ADB commands and flash stuff via the HBoot engine. Where .86 does not allow you to. So if you get in "semi-brick" mode you can 9/10 times get your self up and rocking.
had it happen earlier today as a matter of fact.
http://forum.xda-developers.com/showthread.php?t=1040463
and this one rings a bell....
http://forum.xda-developers.com/showthread.php?t=1035413
They were both what most people would call bricked, but since they had the .85 engineering screen we could get them up and running.
I'm having trouble with my samsung vibrant (galaxy S) I want to flash CM on it. I have root access, Clockwork Mod recovery, and ROM Manager. I go in to ROM manager and select flash ROM from SD card, I select the CM ROM which I downloaded but it gives an error "Status 7" when trying to install, and will not flash the new ROM. Any help with this would be appreciated.
ok first go into clockwork recovery on rom manager and pick flash clockwork recovery and pick vibrantmtd then pick 3x NOT 2X! Then go to download rom and choose cm7 nightlie 8 or under as above have many probs. On ur nightlie choose all three! wipe data, wipe dalvik and backup rom. On ur second nightlie u just have to wipe dalvik and backup rom.
Thanks for the help. I tried that with a slight variation. I had to manually put the ROM on the root of the SD card and named it update.zip. I flashed clockwork recovery and selected 3.x as you said. I selected all 3 options for backup and wipe. Once in recovery I select "Reinstall packages" and it finds update.zip but aborts installation with "Status 7"
Ur doing it wrong. Update package is for only rooting ur phone.
Sent from my SGH-T959 using XDA Premium App
First root ur phone! Then follow my directions to get cm7
Sent from my SGH-T959 using XDA Premium App
the phone is rooted. Is there an easy way for me to double check that? Maybe I'm confusing two processes, but I do have the ROM on the SD card. Am I trying to apply it incorrectly? When I'm in recovery my only options are:
Reboot system now
reinstall packages
delete all user data
delete cache data
format internal SD-card
I'm used to see other option such as on my MT4G which has "install zip from SD card" That is what I typically use to flash a new rom.
Sorry if I'm missing something, but I do appreciate the help
I've been messing with it all night. I wound up doing the ODIN to JFD to get myself back to 2.1. I installed rom manager again, and it appears that when I tell it to flash clockwork mod and then reboot in to recovery I am actually going to stock recovery. I think the options that I listed earlier are for stock recovery as well. I think the main thing I'm missing is the "Install ZIP from SD Card" option in recovery. I guess at this point I'm unsure if I'm rooted, and don't know how to get the correct recovery so I can flash the ROM I'd like.
If ur recovery is blue then u need reinstall packages twice then u will be rooted, then it will turn green. Then go into rom manager and flash clock work recovery. Then put ur rom on internal sd and ur ready to flash. Enjoy
Sent from my SGH-T959 using XDA Premium App
Ok, so we can narrow things down a bit. My recovery is blue. I've downloaded the update.zip that I found from "NOOB Root guide" here on XDA, but no matter how many times I reinstall packages recovery never turns green.
I've also tried the one click root method which does the same thing as above but it just automates things a bit. (http://forum.xda-developers.com/showthread.php?t=739300)
Bump.
Many thanks to movieaddict who has helped so far, but it appears that I don't have root access, and the typical steps found in this thread are not working for me. Any other ideas?
ok is ur phone hardware locked?? by checking by doing this do the 3 button combo to get into download mode. First power off ur phone then plug in ur usb cable to phone and into pc then hold down the up volume and down volume and THEN hold down the power button and let go after a few sec u should see download mode.. If it goes into download mode then ur phone is not hardware lcked and we can go from there if it is hardware locked? then follow this link
http://forum.xda-developers.com/showthread.php?t=801722
if it isnt hardware locked then make sure update package file isnt corrrupted and make sure u put it on ur internal sd card. Make sure the update package is 632 kb sometimes when downloading stuff happens.
im gonna tell u how i do root and flash! First odin back to eclair must easier to root then. Second put the update package on ur internal sd card and dont unrar it leave it as is. Then turn off ur phone and hold down the up volume and the down volume and THEN the power button and as when u SEE THE vibrant logo let go of power button. Ur recovery will be blue then select reinstall package and select yes, it will then go through stuff and come back to recovery blue then do it again and it will turn green. Once its green then select the rom u want to flash and ur ready to go.
Thanks again. From your instructions I can tell that the phone is hardware UNlocked. I've previously gotten in to download mode. also, I see some differences in how you describe the root process. The update.zip is 633kb, I'll try to redownload it again... also, when I hit reinstall packages I am not prompted with yes/no, it just does it. It is a very quick process, and then it auto reboots the phone, but you said it should bring me back to recovery. I'm not sure why that would be happening
I'll mess around with this some more tonight. Hopefully I can nail this down. Sorry to be a PITA.
yah it should bring u back to green recovery after doing it twice! Yah that was my bad it asks u yes or no when flashing...lol!
Sent u pm!!!
Try Superoneclick root! That always works for me. When u reinstall packages and it reboots, clockwork usually has NOT been installed, I always Odin then install Tom Manager, flash Clockwork, then its off to the races!
Sent from my Htcclay's SuperVibeCM7 using XDA Premium App
Sorry Rom Manager not Tom, lol
Sent from my Htcclay's SuperVibeCM7 using XDA Premium App
I've been going over the suggestions all night. I feel like I'm following the instructions... not that they are even that difficult. I get the update.zip on my sd card, I boot in to stock recovery (blue) I reinstall packages, the phone reboots in to normal boot mode, I reboot in to recovery and reinstall packages again. I repeat this process multiple times hoping that one of these times I'm going to see a green recovery. I know it's all smooth sailing from there. I even recorded a short clip of me doing this.
http://www.youtube.com/watch?v=RPreHj16UEU
Is it possible that i've tried so many different way of doing this that I have the phone in a weird state, and now these guides aren't working due to those previous attempts? I tried super1click... wound up getting an error "Getting mount path" ... "failed"
A simple way to check for root would be to download Terminal Emulator from the market and type in "su" without the quotations. If you get $ or permission denied you are not rooted. If you get a super user prompt followed by a # you should have root. Also which rom are you on now? If you are on stock Kb5 the recovery could be giving you some issues trying to flash the CWM recovery or at least for me it did. I suggest using ODIN to go back to JFD, then using super one click root (make sure your screen is set to not go off for the 10 or 30 minute time frame) I suggest this because I have had the "failure to mount" issues many times and it only seems to happen if my phone screen goes off while attempting the root. Once super one click completes, reboot your phone, install Rom manager, then reboot into recovery. You will have to select re install packages from there. The clockwork screen will be green as a few others have stated. I have attached an image below of clockwork, mine is orange since it's cm7 but yours will look similar,but green. From here just choose install from zip sd card, choose zip and flash away. Best of luck to you!
https://picasaweb.google.com/117659...?authkey=Gv1sRgCMbSsp7F4ZHWfg&feat=directlink
Is there something that removes the root access when you reboot the phone? I flashed the recovery for Galaxy S Vibrant (NOT Vibrant MTD) and was able to get to CWR (green), but sometimes when I go in to recovery it is back to blue... if I reinstall packages it takes me to green. Along those same lines I notice SU keeps asking me if the same application can have SuperUser permissions, so it seems like something is not sticking.
are you on 2.1 or 2.2? if you'r on 2.2 and use the update.zip it wont work you have to use superoneclick root ,happened to me too.
Thanks for responding. The phone was on 2.1 because I used ODIN to go back to JFD.
I've since sold the phone (didn't care for it much) and gotten a G2X (which I'm also not wild about). Thanks for all the help everyone!
Hosed my Fascinate by trying to flash a recovery through Odin -> The recovery also had a kernel in the file that I didn't realize. Phone attempts to boot then reboots into recovery. I would prefer not to do a factory reset until I try reflashing the right kernel.
I am aware of this thread that used to have the file I need, but evidently the guy has removed it from his Dropbox now. Does anyone have a copy they can throw up for me? I think I could use the recovery image, too, but it is a little bit easier to find so don't go to great lengths for the recovery.
Will reflashing the correct kernel even fix my problem? I haven't touched /system. Should all my stuff still be there when I get back in?
Skyroket said:
Hosed my Fascinate by trying to flash a recovery through Odin -> The recovery also had a kernel in the file that I didn't realize. Phone attempts to boot then reboots into recovery. I would prefer not to do a factory reset until I try reflashing the right kernel.
I am aware of this thread that used to have the file I need, but evidently the guy has removed it from his Dropbox now. Does anyone have a copy they can throw up for me? I think I could use the recovery image, too, but it is a little bit easier to find so don't go to great lengths for the recovery.
Will reflashing the correct kernel even fix my problem? I haven't touched /system. Should all my stuff still be there when I get back in?
Click to expand...
Click to collapse
If you have access to your sd card via windows, look for http://forum.xda-developers.com/showthread.php?t=1459905 on kernels. The stock is in post 1 at the bottom with the rest of the links. Download it, copy to your sd card and install it via recovery and it should work. If not, find droidstyle's guide, download the CWM 2.5 flash that in Odin, then install kernel.
Sent from my SCH-I500 using XDA App
Edit: Got it. Thanks!! It's booting up fully!!
Nothing below this line matters anymore, but I am leaving it for Google arrivals. The problem I list in this post was caused by excessive copying of the files. I first downloaded the file from the internet, copied it from Firefox downloads folder to my desktop, copied it up to my LAN server, copied it over to my Motorola Droid Bionic SD card, unmounted the SD card and put it into the Fascinate for installation.
The RIGHT way that worked was removing the network component. I just plugged the Bionic into the PC and mounted USB storage mode, copied files over, unplugged, let the SD card remount on the Bionic, manually unmount on the Bionic, remove the card and put it into the Fascinate.
Thanks for being patient with me. Your thread is obvious at the top of the forum but I ignored that method because it was flashing zips in recovery, which I couldn't get into at the time. I got the CWM 2.5 to work, and I did make a successful nandroid backup (will a factory reset restore the kernel, now that I have a backup?).
I did try to flash both versions of that stock kernel kernel-eh03-GB.zip and kernel-eh03-GB_signed.zip and get the same error on both. I even tried with a different SD card:
-- Installing: SDCARD:kernel-eh03-GB.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/kernel-eh03-GB.zip
(bad)
Installation aborted.
I've tried downloading the files again, too. I wonder if it's worth noting that I did previously try to mount the SD card to Windows from CWM. It mounted, but when I tried to copy the file over, Windows told me the media was write-protected. WTF? Haven't seen that since floppies.
I think I'm going to call it a night and if I don't hear anything else on this in the morning I'll just do a factory reset and see if that restores the kernel. Then I can reinstall CWM and restore my backup. *long sigh*
Thanks again, man.
Skyroket said:
Thanks for being patient with me. Your thread is obvious at the top of the forum but I ignored that method because it was flashing zips in recovery, which I couldn't get into at the time. I got the CWM 2.5 to work, and I did make a successful nandroid backup (will a factory reset restore the kernel, now that I have a backup?).
I did try to flash both versions of that stock kernel kernel-eh03-GB.zip and kernel-eh03-GB_signed.zip and get the same error on both. I even tried with a different SD card:
-- Installing: SDCARD:kernel-eh03-GB.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/kernel-eh03-GB.zip
(bad)
Installation aborted.
I've tried downloading the files again, too. I wonder if it's worth noting that I did previously try to mount the SD card in CWM. It mounted, but when I tried to copy the file over, Windows told me the media was write-protected. WTF? Haven't seen that since floppies.
I think I'm going to call it a night and if I don't hear anything else on this in the morning I'll just do a factory reset and see if that restores the kernel. Then I can reinstall CWM and restore my backup. *long sigh*
Thanks again, man.
Click to expand...
Click to collapse
Thats alright, dont worry about it man. Yeah it does sound like you need a factory reset. your phone isnt accepting the download. for ****s and giggles tho, try not using CWM to put the file onto your SD card, and plug it directly into your computer and redownload and transfer that way and see if it takes, if not then you'll definatly have to factory reset. Go here http://forum.xda-developers.com/showthread.php?t=1238070 Follow section 4 to return to stock. That should fix it.
Please note my previous edit. Thanks, again!
Skyroket said:
Please note my previous edit. Thanks, again!
Click to expand...
Click to collapse
Lol didn't see that till after I clicked reply. No problem. Glad you got it working bro
Sent from my SCH-I500 using XDA App