Hi all,
First post ever after years of using your advices.
My writted english is pretty bad, so my apologizes in advance. If you understand spanish you can also see this tutorial in my own languaje where maybe I explain better (lajournalista.cl/tecnologia/tutorial-update-s3-i9300-a-android-4-3-despues-de-reparar-imei/)
This are the steps that I follow to update my S3 I9300 from 4.1.2 to 4.3 after lost & recovery my IMEI (0049) (by box)
So, it's probable that if you never lost your IMEI the bottom half of this tutorial is not needed, the first part is ODIN update but I'm going to explain anyway.
This is my first tutorial, so I really appreciate any question to improve the info, advice to make it better or ask for credit if something here is yours and I didn't have your name here.
IMPORTANT:
This tutorial is what works for me, please if you don't what are you doing be carefull ALWAYS backup your phone in case something whent wrong. I'M NOT RESPONSABLE IF YOU BRIKE YOUR PHONE
You must have a backup of your EFS folder
In my case, the IMEI whas recovered by box
My phone is from Entel company in Chile model GT-I9300
AGAIN... make a backup of your EFS folder AND a complite backup of your phone
I used the following apps/files for this tutorial:
- ROM stock from Brazil ZTO I9300UBUGMK6_I9300ZTOUGMK3_ZTO downloaded from Sammobile, I choose this ROM cause the chilean is not available yet, but usualy is the same ROM used in Brazil
- Kernel & modem parcheados by yesilcin.com XXUGMK6 (I can't remember from where I download this files, so if this is your hint clame your credit)
- Backup of your EFS folder, specifically the files nv_data.bin and nv_data.bin.md5
- Root Explorer
- SuperSU v1.65
- UPDATE SuperSU v1.80 (optional)
- ODIN 3.09
- CF Root v6.4
Let's do this:
1.- Extract (unzip) the firmware file
2.- Open Odin3 v3.09 in admin mode from Windows 7 and up
3.- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
4.- Connect phone and wait until you get a blue sign in Odin with something like 0:[COM7] & <ID:0/007> Added!! in “Message”
5.- Click in AP and select the file I9300UBUGMK6_I9300ZTOUGMK3_ZTO.tar.md5.
6.- Wait till ODIN check the file and when you have a check mark in AP make sure that Auto reboot and F.Reset Time are checked and that Re-partition is UNCHECKED
7.- Press Start
8.- After reset and when the upper left box is green and say PASS your are Ok... this is after white and blue color and a lot of steps boot, system, modem, etc.
*** Until here, this is a regular update, if your phone have signal and your IMEI is ok, you're done and can skip the next steps***
*** If your IMEI is right but still "No signal" follow the next steps***
9.- After reset go to Config --> More --> About the device click severel time in "Compilation N°" till activate the Developer Options
10.- In Developer Options activate USB debugging
11.- Turn off the phone and go back to ODIN (repeat steps 2, 3 & 4)
12.- In AP put the CF-Root-v6.4 to root your phone, press Start and wait till ODIN says PASS
13.- Then copy this files in to the SD:
- Kernel & modem parcheados by yesilcin.com XXUGMK6
- Backup of your EFS folder, specifically the files nv_data.bin and nv_data.bin.md5
- Root Explorer APK
- SuperSU v1.65 APK
- UPDATE SuperSU v1.80 (optional)
14.- Turn off the phone and turn on in Recovery mode (home + power + volume up)
15.- Install the modem and kernel
***This pictures are from IOSDROIDE
DSCF1243.jpg
DSCF1245.jpg
DSCF1246.jpg
DSCF1247.jpg
***When you reboot your S3 is going to be with generic IMEI***
16.- Reboot and install SuperSU v1.65 and Root Explorer
17.- Go to Root Explorer give it SuperSU permission and make sure in the upper left corner says "Mount r/o" and a button that says Mount R/W if this is the other way, press Mount r/o
18.- Copy the nv_data.bin AND nv_data.bin.md5 files from your backup to the EFS folder in your phone
19.- Once copied click on the new files in your phone and "Change Owner" to:
Owner 1001-radio
Grouping 1001 – radio
20.- Restart your phone... Now you should have signal and your IMEI is back
Files used:
4shared.com/zip/-054KS6iba/I9300UBUGMK6_I9300ZTOUGMK3_ZTO.html
4shared.com/rar/iLTvF5Hxba/S3_online.html
***Sorry I'm too new to post links
lajournalista said:
Hi all,
First post ever after years of using your advices.
My writted english is pretty bad, so my apologizes in advance. If you understand spanish you can also see this tutorial in my own languaje where maybe I explain better (lajournalista.cl/tecnologia/tutorial-update-s3-i9300-a-android-4-3-despues-de-reparar-imei/)
This are the steps that I follow to update my S3 I9300 from 4.1.2 to 4.3 after lost & recovery my IMEI (0049) (by box)
So, it's probable that if you never lost your IMEI the bottom half of this tutorial is not needed, the first part is ODIN update but I'm going to explain anyway.
This is my first tutorial, so I really appreciate any question to improve the info, advice to make it better or ask for credit if something here is yours and I didn't have your name here.
IMPORTANT:
This tutorial is what works for me, please if you don't what are you doing be carefull ALWAYS backup your phone in case something whent wrong. I'M NOT RESPONSABLE IF YOU BRIKE YOUR PHONE
You must have a backup of your EFS folder
In my case, the IMEI whas recovered by box
My phone is from Entel company in Chile model GT-I9300
AGAIN... make a backup of your EFS folder AND a complite backup of your phone
I used the following apps/files for this tutorial:
- ROM stock from Brazil ZTO I9300UBUGMK6_I9300ZTOUGMK3_ZTO downloaded from Sammobile, I choose this ROM cause the chilean is not available yet, but usualy is the same ROM used in Brazil
- Kernel & modem parcheados by yesilcin.com XXUGMK6 (I can't remember from where I download this files, so if this is your hint clame your credit)
- Backup of your EFS folder, specifically the files nv_data.bin and nv_data.bin.md5
- Root Explorer
- SuperSU v1.65
- UPDATE SuperSU v1.80 (optional)
- ODIN 3.09
- CF Root v6.4
Let's do this:
1.- Extract (unzip) the firmware file
2.- Open Odin3 v3.09 in admin mode from Windows 7 and up
3.- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
4.- Connect phone and wait until you get a blue sign in Odin with something like 0:[COM7] & <ID:0/007> Added!! in “Message”
5.- Click in AP and select the file I9300UBUGMK6_I9300ZTOUGMK3_ZTO.tar.md5.
6.- Wait till ODIN check the file and when you have a check mark in AP make sure that Auto reboot and F.Reset Time are checked and that Re-partition is UNCHECKED
7.- Press Start
8.- After reset and when the upper left box is green and say PASS your are Ok... this is after white and blue color and a lot of steps boot, system, modem, etc.
*** Until here, this is a regular update, if your phone have signal and your IMEI is ok, you're done and can skip the next steps***
*** If your IMEI is right but still "No signal" follow the next steps***
9.- After reset go to Config --> More --> About the device click severel time in "Compilation N°" till activate the Developer Options
10.- In Developer Options activate USB debugging
11.- Turn off the phone and go back to ODIN (repeat steps 2, 3 & 4)
12.- In AP put the CF-Root-v6.4 to root your phone, press Start and wait till ODIN says PASS
13.- Then copy this files in to the SD:
- Kernel & modem parcheados by yesilcin.com XXUGMK6
- Backup of your EFS folder, specifically the files nv_data.bin and nv_data.bin.md5
- Root Explorer APK
- SuperSU v1.65 APK
- UPDATE SuperSU v1.80 (optional)
14.- Turn off the phone and turn on in Recovery mode (home + power + volume up)
15.- Install the modem and kernel
***This pictures are from IOSDROIDE
DSCF1243.jpg
DSCF1245.jpg
DSCF1246.jpg
DSCF1247.jpg
***When you reboot your S3 is going to be with generic IMEI***
16.- Reboot and install SuperSU v1.65 and Root Explorer
17.- Go to Root Explorer give it SuperSU permission and make sure in the upper left corner says "Mount r/o" and a button that says Mount R/W if this is the other way, press Mount r/o
18.- Copy the nv_data.bin AND nv_data.bin.md5 files from your backup to the EFS folder in your phone
19.- Once copied click on the new files in your phone and "Change Owner" to:
Owner 1001-radio
Grouping 1001 – radio
20.- Restart your phone... Now you should have signal and your IMEI is back
Files used:
4shared.com/zip/-054KS6iba/I9300UBUGMK6_I9300ZTOUGMK3_ZTO.html
4shared.com/rar/iLTvF5Hxba/S3_online.html
***Sorry I'm too new to post links
Click to expand...
Click to collapse
i recoverd my imei by the box when i was on 4.1.2 ( i9300 ) after that when i update to 4.3 i get imei broken like that 0006xxxx000 ... what should i do
I'm losing Imei too
lajournalista said:
Hi all,
First post ever after years of using your advices.
My writted english is pretty bad, so my apologizes in advance. If you understand spanish you can also see this tutorial in my own languaje where maybe I explain better (lajournalista.cl/tecnologia/tutorial-update-s3-i9300-a-android-4-3-despues-de-reparar-imei/)
This are the steps that I follow to update my S3 I9300 from 4.1.2 to 4.3 after lost & recovery my IMEI (0049) (by box)
So, it's probable that if you never lost your IMEI the bottom half of this tutorial is not needed, the first part is ODIN update but I'm going to explain anyway.
This is my first tutorial, so I really appreciate any question to improve the info, advice to make it better or ask for credit if something here is yours and I didn't have your name here.
IMPORTANT:
This tutorial is what works for me, please if you don't what are you doing be carefull ALWAYS backup your phone in case something whent wrong. I'M NOT RESPONSABLE IF YOU BRIKE YOUR PHONE
You must have a backup of your EFS folder
In my case, the IMEI whas recovered by box
My phone is from Entel company in Chile model GT-I9300
AGAIN... make a backup of your EFS folder AND a complite backup of your phone
I used the following apps/files for this tutorial:
- ROM stock from Brazil ZTO I9300UBUGMK6_I9300ZTOUGMK3_ZTO downloaded from Sammobile, I choose this ROM cause the chilean is not available yet, but usualy is the same ROM used in Brazil
- Kernel & modem parcheados by yesilcin.com XXUGMK6 (I can't remember from where I download this files, so if this is your hint clame your credit)
- Backup of your EFS folder, specifically the files nv_data.bin and nv_data.bin.md5
- Root Explorer
- SuperSU v1.65
- UPDATE SuperSU v1.80 (optional)
- ODIN 3.09
- CF Root v6.4
Let's do this:
1.- Extract (unzip) the firmware file
2.- Open Odin3 v3.09 in admin mode from Windows 7 and up
3.- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
4.- Connect phone and wait until you get a blue sign in Odin with something like 0:[COM7] & <ID:0/007> Added!! in “Message”
5.- Click in AP and select the file I9300UBUGMK6_I9300ZTOUGMK3_ZTO.tar.md5.
6.- Wait till ODIN check the file and when you have a check mark in AP make sure that Auto reboot and F.Reset Time are checked and that Re-partition is UNCHECKED
7.- Press Start
8.- After reset and when the upper left box is green and say PASS your are Ok... this is after white and blue color and a lot of steps boot, system, modem, etc.
*** Until here, this is a regular update, if your phone have signal and your IMEI is ok, you're done and can skip the next steps***
*** If your IMEI is right but still "No signal" follow the next steps***
9.- After reset go to Config --> More --> About the device click severel time in "Compilation N°" till activate the Developer Options
10.- In Developer Options activate USB debugging
11.- Turn off the phone and go back to ODIN (repeat steps 2, 3 & 4)
12.- In AP put the CF-Root-v6.4 to root your phone, press Start and wait till ODIN says PASS
13.- Then copy this files in to the SD:
- Kernel & modem parcheados by yesilcin.com XXUGMK6
- Backup of your EFS folder, specifically the files nv_data.bin and nv_data.bin.md5
- Root Explorer APK
- SuperSU v1.65 APK
- UPDATE SuperSU v1.80 (optional)
14.- Turn off the phone and turn on in Recovery mode (home + power + volume up)
15.- Install the modem and kernel
***This pictures are from IOSDROIDE
DSCF1243.jpg
DSCF1245.jpg
DSCF1246.jpg
DSCF1247.jpg
***When you reboot your S3 is going to be with generic IMEI***
16.- Reboot and install SuperSU v1.65 and Root Explorer
17.- Go to Root Explorer give it SuperSU permission and make sure in the upper left corner says "Mount r/o" and a button that says Mount R/W if this is the other way, press Mount r/o
18.- Copy the nv_data.bin AND nv_data.bin.md5 files from your backup to the EFS folder in your phone
19.- Once copied click on the new files in your phone and "Change Owner" to:
Owner 1001-radio
Grouping 1001 – radio
20.- Restart your phone... Now you should have signal and your IMEI is back
Files used:
4shared.com/zip/-054KS6iba/I9300UBUGMK6_I9300ZTOUGMK3_ZTO.html
4shared.com/rar/iLTvF5Hxba/S3_online.html
***Sorry I'm too new to post links
Click to expand...
Click to collapse
sure that you really have back your imei?
deleted
just doing this now after upgrading to 4.3 and losing my imei ,serial number . managed to recover those but still had no data connection . tried many rom's with no luck ended up with factory mode twice as well, efs files cannot be overwritten via shell terminal or root explorer , they get corrupted and the imei cannot be repaired correctly even with professional tool ,security sector corrupt. imei is repaired but still no data connection possible
so I will see how this goes and report back
---------- Post added at 02:55 AM ---------- Previous post was at 02:31 AM ----------
jona29 said:
just doing this now after upgrading to 4.3 and losing my imei ,serial number . managed to recover those but still had no data connection . tried many rom's with no luck ended up with factory mode twice as well, efs files cannot be overwritten via shell terminal or root explorer , they get corrupted and the imei cannot be repaired correctly even with professional tool ,security sector corrupt. imei is repaired but still no data connection possible
so I will see how this goes and report back
Click to expand...
Click to collapse
this does actually recover your imei number . if after flashing the rom it is still generic once you do this part::
18.- Copy the nv_data.bin AND nv_data.bin.md5 files from your backup to the EFS folder in your phone
19.- Once copied click on the new files in your phone and "Change Owner" to:
Owner 1001-radio
Grouping 1001 – radio
your imei number is restored.
I still had no signal until I flashed the patched kernel and modem . but I can confirm this does work 100% or it has for me I have tried numerous ways in the last 12 hours or so and this is a live saver many thanks to the original poster
can somebody post a screenshot of correct permission to do on nv_data?
Go on 4.3
they get corrupted and the imei cannot be repaired correctly even with professional tool
thank you
lajournalista said:
Hi all,
First post ever after years of using your advices.
My writted english is pretty bad, so my apologizes in advance. If you understand spanish you can also see this tutorial in my own languaje where maybe I explain better (lajournalista.cl/tecnologia/tutorial-update-s3-i9300-a-android-4-3-despues-de-reparar-imei/)
This are the steps that I follow to update my S3 I9300 from 4.1.2 to 4.3 after lost & recovery my IMEI (0049) (by box)
So, it's probable that if you never lost your IMEI the bottom half of this tutorial is not needed, the first part is ODIN update but I'm going to explain anyway.
This is my first tutorial, so I really appreciate any question to improve the info, advice to make it better or ask for credit if something here is yours and I didn't have your name here.
IMPORTANT:
This tutorial is what works for me, please if you don't what are you doing be carefull ALWAYS backup your phone in case something whent wrong. I'M NOT RESPONSABLE IF YOU BRIKE YOUR PHONE
You must have a backup of your EFS folder
In my case, the IMEI whas recovered by box
My phone is from Entel company in Chile model GT-I9300
AGAIN... make a backup of your EFS folder AND a complite backup of your phone
I used the following apps/files for this tutorial:
- ROM stock from Brazil ZTO I9300UBUGMK6_I9300ZTOUGMK3_ZTO downloaded from Sammobile, I choose this ROM cause the chilean is not available yet, but usualy is the same ROM used in Brazil
- Kernel & modem parcheados by yesilcin.com XXUGMK6 (I can't remember from where I download this files, so if this is your hint clame your credit)
- Backup of your EFS folder, specifically the files nv_data.bin and nv_data.bin.md5
- Root Explorer
- SuperSU v1.65
- UPDATE SuperSU v1.80 (optional)
- ODIN 3.09
- CF Root v6.4
Let's do this:
1.- Extract (unzip) the firmware file
2.- Open Odin3 v3.09 in admin mode from Windows 7 and up
3.- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
4.- Connect phone and wait until you get a blue sign in Odin with something like 0:[COM7] & <ID:0/007> Added!! in “Message”
5.- Click in AP and select the file I9300UBUGMK6_I9300ZTOUGMK3_ZTO.tar.md5.
6.- Wait till ODIN check the file and when you have a check mark in AP make sure that Auto reboot and F.Reset Time are checked and that Re-partition is UNCHECKED
7.- Press Start
8.- After reset and when the upper left box is green and say PASS your are Ok... this is after white and blue color and a lot of steps boot, system, modem, etc.
*** Until here, this is a regular update, if your phone have signal and your IMEI is ok, you're done and can skip the next steps***
*** If your IMEI is right but still "No signal" follow the next steps***
9.- After reset go to Config --> More --> About the device click severel time in "Compilation N°" till activate the Developer Options
10.- In Developer Options activate USB debugging
11.- Turn off the phone and go back to ODIN (repeat steps 2, 3 & 4)
12.- In AP put the CF-Root-v6.4 to root your phone, press Start and wait till ODIN says PASS
13.- Then copy this files in to the SD:
- Kernel & modem parcheados by yesilcin.com XXUGMK6
- Backup of your EFS folder, specifically the files nv_data.bin and nv_data.bin.md5
- Root Explorer APK
- SuperSU v1.65 APK
- UPDATE SuperSU v1.80 (optional)
14.- Turn off the phone and turn on in Recovery mode (home + power + volume up)
15.- Install the modem and kernel
***This pictures are from IOSDROIDE
DSCF1243.jpg
DSCF1245.jpg
DSCF1246.jpg
DSCF1247.jpg
***When you reboot your S3 is going to be with generic IMEI***
16.- Reboot and install SuperSU v1.65 and Root Explorer
17.- Go to Root Explorer give it SuperSU permission and make sure in the upper left corner says "Mount r/o" and a button that says Mount R/W if this is the other way, press Mount r/o
18.- Copy the nv_data.bin AND nv_data.bin.md5 files from your backup to the EFS folder in your phone
19.- Once copied click on the new files in your phone and "Change Owner" to:
Owner 1001-radio
Grouping 1001 – radio
20.- Restart your phone... Now you should have signal and your IMEI is back
Files used:
4shared.com/zip/-054KS6iba/I9300UBUGMK6_I9300ZTOUGMK3_ZTO.html
4shared.com/rar/iLTvF5Hxba/S3_online.html
***Sorry I'm too new to post links
Click to expand...
Click to collapse
thank you it have worked after step 15 and with rom xxugna8, at last I updated my phon to 4.3 thaaaaaaanx :fingers-crossed:
for e210s just flash your desired baseband here and problem solve
likesoft.info/196
I really want to switch to cm11 and i have 4.1.2xxemc2
I had a problem with the imei and laboratory arranged for me and I use ARIZAPatch (my serial number is 000000) What to I do?
Thanks
patched I9300 kernel and modem firmware needed for 4.3+
It seems to me this guide is useless unless it gets updated with some working links to the patched kernel and modem firmware. Does anyone know where they could be found?
After having read other SGS3 I9300 guides on these forums and the web (such as http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289 ) I was under the impression I would be able to get a 4.3 or later ROM working if I just backed up and restored my EFS partition. As other repliers to this thread have noted, that is not enough to restore network connectivity - certainly not under stock 4.3 or RevolutionaryS5 v3. Wifi works but I cannot dial/text out, receive calls/texts or connect to 3G etc under these later ROMs.
I was surprised by all this as I thought once a phone was unlocked, it was unlocked. I've read that there are a few sites that might be able to sell me SIM unlock codes but I'm not so keen on forking out for a code that will only last as long as my current installation, if it works at all. If the patched files don't show up I suppose I'll have to live with 4.1 and this guide may as well get deleted and unstickied as its no use without.
Thanks for your help XDA S3 users!
I have a feeling that the patched kernel/modem simply ignores a mismatching MD5.
Someone with this problem please verify that the value in nv_data.bin.md5 matches the MD5 calculated with the Samsung_Android_RIL method.
Sent from my GT-I9305 using XDA Free mobile app
patched kernel and firmware found but still no network
I seem to have found the patched kernel and modem for running 4.3 on I9300:
http://www.androidveterans.com/solve-registered-network-galaxy-s3-i9300-issue-restore-imei/
I tried these with revolutionS5 first but when it failed to work I flashed I9300XXUGMK6_I9300OXAGMK6_BTU.zip and CWM and then these patched zips but I had no success. My IMEI is still incorrect and I'm still not registered on my network.
I've also tried the latest CM11 snapshot but that had the same issues.
hi all,
first sorry for my bad english.
andorid version 6.0.1, rooted.
i have two problems
first, phone is single sim, but in settings shows "manage sim cards" phone is no g935FD, phone is g935F, but phone works ok.
second, when i update with odin, firmware form sammobile, i can't connect on network, my sim card can't work.
i backup all with flashfire, and when i restore all expect EFS and modem firmware, phone still does't work, and with efs work.
my phone is gift from cousin, and that in settings show only one sim and phone is rooted too.
After that I tried, and I told you what happened.
please help me how to update to 7.0, and how to solve problem with sim.
i tried to update with odin, but when i restore efs and modem, phone, can't connect on network.
UP !
Up !!
Anyone ?
Upppppp
Antonije123 said:
hi all,
first sorry for my bad english.
andorid version 6.0.1, rooted.
i have two problems
first, phone is single sim, but in settings shows "manage sim cards" phone is no g935FD, phone is g935F, but phone works ok.
second, when i update with odin, firmware form sammobile, i can't connect on network, my sim card can't work.
i backup all with flashfire, and when i restore all expect EFS and modem firmware, phone still does't work, and with efs work.
my phone is gift from cousin, and that in settings show only one sim and phone is rooted too.
After that I tried, and I told you what happened.
please help me how to update to 7.0, and how to solve problem with sim.
i tried to update with odin, but when i restore efs and modem, phone, can't connect on network.
Click to expand...
Click to collapse
Can you please provide your device exact model number? It is printed below on the back panel of your phone..Then can suggest you exact stock firmware to flash using odin
DroidHackeR said:
Can you please provide your device exact model number? It is printed below on the back panel of your phone..Then can suggest you exact stock firmware to flash using odin
Click to expand...
Click to collapse
Model is g935f.
I tried superstock room, but again problem with network connect
Antonije123 said:
Model is g935f.
I tried superstock room, but again problem with network connect
Click to expand...
Click to collapse
What do you mean by superstock room? You need to flash latest nought 7.0 stock firmware for your device..
1)Go to the link provided below and select country for your device and download latest 7.0 firmware using free member through registration
https://www.sammobile.com/firmwares/database/SM-G935F/
AFTER THAT FOLLOW ODIN FLASHING GUIDE PROVIDED BELOW
1)You can flash stock firmware for you specific device and country using sammobile.com as a free member registration* Remember to download latest stock firmware for your specific model number and country, you can find your model number printed below on back panel of your phone*
2)Go there in firmware section and enter your device model no and country..( Save it to pc and extract it on your pc in particular firmware folder, you will now find tar.md5 file in that folder)..Now download latest versions of odin and Samsung usb drivers for your device( Extract those files as you did with firmware, install latest usb drivers on pc)
3)From your phone's setting>about device>software info>press build version for 7-8 times continuesly to enable developers option
4)You can find developers option below setting>about device..From developers option select oem unlocking and usb debugging enabled
5)Now connect your phone to pc in download mode( Press volume down+home+power button simultaneously, you are now in download mode..press volume up button to continue)
6) Run odin as device administrator on your pc from odin extracted folder, let pc to install device drivers and your device will be highlighted in odin..
7)Add previously extracted tar.md5 file of stock firmware in AP tab of odin, give it some time to be ready..In odin options let auto reset and reboot options checked..*Dont check repatriation option*
8) Now click start button in odin, flashing process have been started..Sit back and relax untill firmware is being flashed..After that your device will be automatically rebooted and you will have latest stock firmware on your device..
*DO IT ON YOUR OWN RISK NOR I NEITHER ANYONE FROM XDA FORUM WILL BE RESPONSIBLE FOR ANY DAMAGE OR BRICK OF YOUR DEVICE*
DroidHackeR said:
What do you mean by superstock room? You need to flash latest nought 7.0 stock firmware for your device..
1)Go to the link provided below and select country for your device and download latest 7.0 firmware using free member through registration
https://www.sammobile.com/firmwares/database/SM-G935F/
AFTER THAT FOLLOW ODIN FLASHING GUIDE PROVIDED BELOW
1)You can flash stock firmware for you specific device and country using sammobile.com as a free member registration* Remember to download latest stock firmware for your specific model number and country, you can find your model number printed below on back panel of your phone*
2)Go there in firmware section and enter your device model no and country..( Save it to pc and extract it on your pc in particular firmware folder, you will now find tar.md5 file in that folder)..Now download latest versions of odin and Samsung usb drivers for your device( Extract those files as you did with firmware, install latest usb drivers on pc)
3)From your phone's setting>about device>software info>press build version for 7-8 times continuesly to enable developers option
4)You can find developers option below setting>about device..From developers option select oem unlocking and usb debugging enabled
5)Now connect your phone to pc in download mode( Press volume down+home+power button simultaneously, you are now in download mode..press volume up button to continue)
6) Run odin as device administrator on your pc from odin extracted folder, let pc to install device drivers and your device will be highlighted in odin..
7)Add previously extracted tar.md5 file of stock firmware in AP tab of odin, give it some time to be ready..In odin options let auto reset and reboot options checked..*Dont check repatriation option*
8) Now click start button in odin, flashing process have been started..Sit back and relax untill firmware is being flashed..After that your device will be automatically rebooted and you will have latest stock firmware on your device..
*DO IT ON YOUR OWN RISK NOR I NEITHER ANYONE FROM XDA FORUM WILL BE RESPONSIBLE FOR ANY DAMAGE OR BRICK OF YOUR DEVICE*
Click to expand...
Click to collapse
If i only flash ap phone can't run.
Superstock room i downloaded form xda.
Yes i know everything you wrote, but when flash stock firmware my phone on search network show one network, and show that's my phone g935fd.
First time when i update phone, i must send at service, and my phone was been rooted on 6.01 and single sim(g935f) .
I tried to install stock 6.01 via odin from sammobile but don't work
Antonije123 said:
If i only flash ap phone can't run.
Superstock room i downloaded form xda.
Yes i know everything you wrote, but when flash stock firmware my phone on search network show one network, and show that's my phone g935fd.
First time when i update phone, i must send at service, and my phone was been rooted on 6.01 and single sim(g935f) .
I tried to install stock 6.01 via odin from sammobile but don't work
Click to expand...
Click to collapse
You should flash 7.0 latest nougat for your device model no and country instead of 6.0.1 through odin..Try to flash 7.0 stock firmware instead of superstock rom or stock 6.0.1..If you are running your phone well and have root access..Download Samsung phone info app..Grant root access and provide me screen-shot of information shown in that application here..So i can suggest you proper stock firmware to be flashed using odin
DroidHackeR said:
You should flash 7.0 latest nougat for your device model no and country instead of 6.0.1 through odin..Try to flash 7.0 stock firmware instead of superstock rom or stock 6.0.1..If you are running your phone well and have root access..Download Samsung phone info app..Grant root access and provide me screen-shot of information shown in that application here..So i can suggest you proper stock firmware to be flashed using odin
Click to expand...
Click to collapse
Ss
Antonije123 said:
Ss
Click to expand...
Click to collapse
Nougat is still not available for your country..So you have flashed latest stock 6.0.1 firmware using odin? Still you are not getting network signal? After flashing stock firmware don't restore your efs, it will be restored automatically after flashing...Now just again flash the stock 6.0.1 available on sammobile and after flashing when you see Samsung logo, simply press volume down+power button now your screen will turn off..immediately Press volume up+power+home button simultaneously untill you see Samsung galaxy logo, now release keys and you will boot into stock recovery..From there choose wipe data/factory reset option..After reset, reboot your phone..And see if singal back again or not?
DroidHackeR said:
Nougat is still not available for your country..So you have flashed latest stock 6.0.1 firmware using odin? Still you are not getting network signal? After flashing stock firmware don't restore your efs, it will be restored automatically after flashing...Now just again flash the stock 6.0.1 available on sammobile and after flashing when you see Samsung logo, simply press volume down+power button now your screen will turn off..immediately Press volume up+power+home button simultaneously untill you see Samsung galaxy logo, now release keys and you will boot into stock recovery..From there choose wipe data/factory reset option..After reset, reboot your phone..And see if singal back again or not?
Click to expand...
Click to collapse
Can you send me link for what country to download? I download for slovenia 6.01 but still don't work, and i must restore efs,preload and modem firmware.
App i used to backup ans restore flashfire. I don't konw what is preload but is very important to signal.
Antonije123 said:
Can you send me link for what country to download? I download for slovenia 6.01 but still don't work, and i must restore efs,preload and modem firmware.
App i used to backup ans restore flashfire. I don't konw what is preload but is very important to signal.
Click to expand...
Click to collapse
Try this one as your csc in TOP and country is serbia-russia..Flash it using odin and report..By the way before flashing enable OEM UNLOCKING and USB DEBUGGING from developers option..
Link- https://www.sammobile.com/firmwares/download/89389/G935FXXU1BPH6_G935FTOP1BPH1_TOP/
JUST FLASH AS I INSTRUCTED ABOVE IN FIRST POST I.E.HOW TO FLASH STOCK FIRMWARE USING ODIN AND DO FACTORY RESET VIA STOCK RECOVERY AFTER FLASHING AS I SAID IN MY PREVIOUS POST
DroidHackeR said:
Try this one as your csc in TOP and country is serbia-russia..Flash it using odin and report..By the way before flashing enable OEM UNLOCKING and USB DEBUGGING from developers option..
Link- https://www.sammobile.com/firmwares/download/89389/G935FXXU1BPH6_G935FTOP1BPH1_TOP/
JUST FLASH AS I INSTRUCTED ABOVE IN FIRST POST I.E.HOW TO FLASH STOCK FIRMWARE USING ODIN AND DO FACTORY RESET VIA STOCK RECOVERY AFTER FLASHING AS I SAID IN MY PREVIOUS POST
Click to expand...
Click to collapse
Ok, flash only ap or bl, ap, cp,csc ?
Antonije123 said:
Ok, flash only ap or bl, ap, cp,csc ?
Click to expand...
Click to collapse
This is single bundled firmware including ap,cp,bl in it and it is have to flash as AP only..
DroidHackeR said:
This is single bundled firmware including ap,cp,bl in it and it is have to flash as AP only..
Click to expand...
Click to collapse
ok, i will try now, and report here after done
up: after flash i have again two sim, and on search network show me only one network witch is not mine.
Antonije123 said:
ok, i will try now, and report here after done
up: after flash i have again two sim, and on search network show me only one network witch is not mine.
Click to expand...
Click to collapse
Ohhhk now one more tutorial for you and it will help you i guess
1) Download samsung smartswitch application for windows from the link provided below
http://samsungsmartswitch.org/
2) Install latest samsung usb drivers for your s7 edge from below
http://samsungusbdriver.com/download/samsung-driver-v1-5-63-0
3)Now install both samsung smart switch and samsung usb drivers on your windows pc
4) Open samsung smart switch as device administrator on your pc
5) Power off your device and press volume down+home+power button simultaneously untill you get into download mode, now press volume up to continue
6)After installing usb drivers for your phone by pc, your device will be recognised in smart switch
7) Select emergency software recovert option from smart switch
8) It will ask you some information like model no and serial no ( You can find model no and serial no printed below on back panel of phone or on the box of phone)
9) After providing such information, smart switch will locate latest and correct software version to be installed for your device
10) Start update and sit back..It will take some time to update software..After that your device will be reboot and if you are facing bootloop i.e. stuck at samsung logo follow factory reset process i have provided earlier( While your phone stuck at samsung logo for long time, press volume down+power button, screen will turn off now immediatly press volume up+power+home button simultaneously untill you see samsung galaxy s7 edge logo..Now release buttons, you will boot into stock recovery..From there choose wipe data/factory reset option..After reset complete, reboot your device)
*IF SMART SWITCH FAILS TO DETECT YOUR DEVICE, UNINSTALL SAMSUNG USB DRIVER AND INSTALL THEM AGAIN AND FOLLOW PROCESS AGAIN*
● You can refer this guide that how to find and restore exact firmware for your device using Smart switch before trying
https://www.sammobile.com/forum/showthread.php?t=29914
DroidHackeR said:
Ohhhk now one more tutorial for you and it will help you i guess
1) Download samsung smartswitch application for windows from the link provided below
http://samsungsmartswitch.org/
2) Install latest samsung usb drivers for your s7 edge from below
http://samsungusbdriver.com/download/samsung-driver-v1-5-63-0
3)Now install both samsung smart switch and samsung usb drivers on your windows pc
4) Open samsung smart switch as device administrator on your pc
5) Power off your device and press volume down+home+power button simultaneously untill you get into download mode, now press volume up to continue
6)After installing usb drivers for your phone by pc, your device will be recognised in smart switch
7) Select emergency software recovert option from smart switch
8) It will ask you some information like model no and serial no ( You can find model no and serial no printed below on back panel of phone or on the box of phone)
9) After providing such information, smart switch will locate latest and correct software version to be installed for your device
10) Start update and sit back..It will take some time to update software..After that your device will be reboot and if you are facing bootloop i.e. stuck at samsung logo follow factory reset process i have provided earlier( While your phone stuck at samsung logo for long time, press volume down+power button, screen will turn off now immediatly press volume up+power+home button simultaneously untill you see samsung galaxy s7 edge logo..Now release buttons, you will boot into stock recovery..From there choose wipe data/factory reset option..After reset complete, reboot your device)
*IF SMART SWITCH FAILS TO DETECT YOUR DEVICE, UNINSTALL SAMSUNG USB DRIVER AND INSTALL THEM AGAIN AND FOLLOW PROCESS AGAIN*
● You can refer this guide that how to find and restore exact firmware for your device using Smart switch before trying
https://www.sammobile.com/forum/showthread.php?t=29914
Click to expand...
Click to collapse
i tried, but that installated (DRE), and don't work
Antonije123 said:
i tried, but that installated (DRE), and don't work
Click to expand...
Click to collapse
You have tried both stock flashing through odin and also smart switch recovery still not getting any signal?? I think i have helped you in all possible ways i could suggest..Now you can either wait for any expertised advice or simply visit samsung service centre and ask them to restore you phone's original firmware...Sorry and Regards