I now tried several times to install RAFDROID HD 4.0.2 but there seems to be a problem with the SD card since the installation always stucks with the boot logo.
I formatted, wiped, partitioned the card hundered times and I've done installations like that before w/o having any problems!
If I try to install an Android version which only uses NAND and not SD card everything is fine.
What is the most reasonable source for this issue?
I really do not know what to do now! I did following and I think this is correct:
1. Task29
2. MAGLDR 1.13
3. RECOVERY 400MB
4. RAFDROID HD
And of cource I have the two partitions on the SD card and I bought a new one and have the same failure... Please help. I need this phone!
Related
Hello guys.
I have a HTC HD2 running Windows Phone 7 (on MagLdr 1.2).
I want to DualBoot Android AND WPH. Ive watched a tut on YouTube: http://www.youtube.com/watch?v=JTHRAUHZHlo
I did exactly the same and after that i took this Android DesireHD Built: http://forum.xda-developers.com/showthread.php?t=881937
It worked fine but android said, that there isnt a sd card in the device. Of course it is, cuz android boots from the sd card. When i remove my sd card, android freezes (of course). I tried to restart and i put the 512 MB data.img in the folder but there was the same problem again..
I tried it with an other card and i pushed the button "mount sd card"
and than it said "u can take out the sd card now" (or something like that)
Plz help me!
I am having the exact same problem. Have you found the problem/solution to it.
thanks.
you both update you magldr that should fix your issues.
so get newest radio, than flsh magldr 1.3
before you update make a complete backup!!
hope you both have the right partition layout on sd card.
(first partition must be fat32 second ext3 or ext4)
hope this helps.
for tut look at forums or pm me!!
Can someone describe the exact steps that are required to mount the SD card when the Android build is being run off the SD card using MAGLDR.
alltome said:
you both update you magldr that should fix your issues.
so get newest radio, than flsh magldr 1.3
before you update make a complete backup!!
hope you both have the right partition layout on sd card.
(first partition must be fat32 second ext3 or ext4)
hope this helps.
for tut look at forums or pm me!!
Click to expand...
Click to collapse
They are running Android from their SD card. It is not going to show a SD card being in the device because Android thinks the SD card is the device......
you both update you magldr that should fix your issues.
Click to expand...
Click to collapse
This will not help them at all, MAGLDR just serves as the bootloader for Android not the OS.
Allso you can not remove your SD card will booted into Android if you are using a SD card build it is running of the SD card not NAND.
T-Macgnolia said:
They are running Android from their SD card. It is not going to show a SD card being in the device because Android thinks the SD card is the device......
This will not help them at all, MAGLDR just serves as the bootloader for Android not the OS.
Allso you can not remove your SD card will booted into Android if you are using a SD card build it is running of the SD card not NAND.
Click to expand...
Click to collapse
So basically I cannot mount the SD card, no matter how it is formatted ?
I totally have this same problem. Neither WP7 or Droid will read the 16 GB card I'm using to run Droid. I think I'm using the DesireHD build also, maybe its that? I can probably see if changing it makes a difference.
I have the same problem. First time i installed WP7 and android, everything was working fine. Then i had to reset WP7 because it kept freezing, i followed the same steps again to dual boot with android and it booted fine but SD CARD is not mounted for some reason. I have tried 3 different android builds with same problem. Any help or tutorials?
Killer2000 said:
Hello guys.
I have a HTC HD2 running Windows Phone 7 (on MagLdr 1.2).
I want to DualBoot Android AND WPH. Ive watched a tut on YouTube: http://www.youtube.com/watch?v=JTHRAUHZHlo
I did exactly the same and after that i took this Android DesireHD Built: http://forum.xda-developers.com/showthread.php?t=881937
It worked fine but android said, that there isnt a sd card in the device. Of course it is, cuz android boots from the sd card. When i remove my sd card, android freezes (of course). I tried to restart and i put the 512 MB data.img in the folder but there was the same problem again..
I tried it with an other card and i pushed the button "mount sd card"
and than it said "u can take out the sd card now" (or something like that)
Plz help me!
Click to expand...
Click to collapse
This happened to me too with two SD cards. What I did was I run the Partition SD Card from AD Recovery. I forgot the partition layout, just find something that works for you. I was surprised that it has successfully created a partition...this erased everything so I needed to re-copy ROM files to SD card via Card Reader on my PC.
When I did it over, It finally worked. Am now running Sensation XL ROM.
HTH
hello, i got a 4gb sd card which works perfectly with magldr (1.13) and im enjoying a custom rom on my hd2 for a few months now
now, i recently got a 16 gb sd card and i tried to flash in various roms such as BoxmaX.S3.5.v6.0
but every time i turn on the phone it get stuck in various loading phases (most of them in the android/htc logo)
but when im using my old card everythings works great with the old rom, i dont want to overwrite it if it is not necessary
i formatted the new card several times and yet the problem stays the same.
i would appreciate your help.
every sd card isn't good for android. avoid using cheap, low-quality cards. i think sandisk is the best for hd2.
Are you using sd-ext?
If i was you i would task 29, reformat the sd card using panasonic sd formatter and use slow erase (better reliablity), reinstall magdlr, and download your choice of recovery for your rom.
reboot into magdlr and go to cwm and mount sd. It should pop up
worked for me for i have a 16 gig as well.
also you have to make sure what the system partion of your rom is as well. otherwise bootloops will commence.
let me know how it goes!
thank you
tecle2595 said:
If i was you i would task 29, reformat the sd card using panasonic sd formatter and use slow erase (better reliablity), reinstall magdlr, and download your choice of recovery for your rom.
reboot into magdlr and go to cwm and mount sd. It should pop up
worked for me for i have a 16 gig as well.
also you have to make sure what the system partion of your rom is as well. otherwise bootloops will commence.
let me know how it goes!
Click to expand...
Click to collapse
thank you very much
i did as you said, task 29, reformat with the formatter reinstall magldr and it works, the problem is that it is painfully slow now and it freezes for a minute now and than.
You can't 'flash' that ROM since it is an SD ROM (if I am not mistaken).
Their are different class SD cards, some are faster than others. However I do not know the numbers..
So, i know, again the sd problem, but nopt the "normal" lock problem:
The hd2 donna read any sd card in magdlr!
But from the piont of beginning:
1) original miui version installed (from german miui)
2) installed WP7 back to future, dunno run, so i changed the sd card to an 8gb one. also not work, so i want to go back to android.
so i installed a clean wp7 back2future rom and use the unlock.cab 2 unlock my sd card, worked more or less but sd cards are unlocked now
3) first flash the original wm 6.5 built from htc, everything worjks(read sd card)
4) task 29
5)magdlr
6) cwm installed
7) want to copy over a rom, but windows told me, that i have to format the card, but if i do, theres ionly one 1kb partiotion...
but the sdcard worksd always in windows mobile roms and with a reader! what can i do? all sd cards are unlocked!
mmg06
are you doing the services last24sd
and services clearsdmbr
in maglder before installation of rom?
before instsalling wp7 yes, biut before installing android/cwm, no.
i would try that.
dunno work...
Good day
i had working Dual boot OS with WP7 and android for the last 2 weeks on my HTC HD2 with 32Gb SanDisk MicroSD.
yesterday i wanted to make a new installation with other versions on the OS. So...
i formatted the SD card to New FAT32 and the PC recognize it well.
I went to install WP7 from there :
http://forum.xda-developers.com/showthread.php?t=1236027
and after the installation the phone reboot and i did again hard reset for it to build up the partitions on the SD.
after the second boot the phone got stuck and i had to take the battery out in i wanted to start all over from the beginning.
when i went to format the SD again my Windows didn't find it nothing i did.
i i used all the partition application i know but nothing - no SD or dead sd.
i also installed Gparted and boot from the live cd but still no SD.
i installed original WM 6.5 - buy fuss what - still no SD installed.
i don't know what to do??????
i installed also android on hand and tried to format from the android but still - no SD installed.
is there some magic i can do?
or my SD is dead?
i hope i can fix it......
thanks
your SD card is locked.... BTTF lock card and that card not readable.... you must unlock card first... send unlock cab file to phone and after that you can format card (or use old Nokia phone http://forum.xda-developers.com/showthread.php?t=1242071)
if you want dual boot without worry about locking card, try use Pdaimatejam Rom or DFT UltraFruit
also you have video how to dual boot android and WP7 http://forum.xda-developers.com/showthread.php?t=1356833
Hi
you have to use "ultimate boot cd", boot on, find your sd card and format
hope this help
Thanks
cannot read sd card
dxdy said:
your SD card is locked.... BTTF lock card and that card not readable.... you must unlock card first... send unlock cab file to phone and after that you can format card (or use old Nokia phone http://forum.xda-developers.com/showthread.php?t=1242071)
if you want dual boot without worry about locking card, try use Pdaimatejam Rom or DFT UltraFruit
I installed pdaimatejam rom v7.1, cannot read sd card. Already send cab lock and unlocked cab both with hard reset.Easeus partition, pc and sdfomatter still cannot read. Phone and zune can read my card. What gone wrong any idea?
Click to expand...
Click to collapse
Hello,
I have a problem with running roms using DataOnEXT or NativeSD.
For DataOnEXT it takes a long while to get booted but when it is booted it all seems to work (wizard etc.) but when I restart the phone everything is resetted. I have to re-enter the details for the wizard etc. Nothing is getting saved.
For NativeSD it sometimes keeps stuck at the loading screen but when it loads I get a lot of messages about processes that has been stopped and most of the times the phone reboots.
I have a Kingston 4GB Class 10 SD card.
My steps are:
I install HSPL 2.08
I install Radio 2.15
I run the task29 using HD2 Toolkit 4.3.1
I install MAGLDR 1.13 using HD2 Toolkit 4.3.1
I get the SD card and with the MiniTool Partition Wizard Home Edition I create 2 partitions (both primary). First one is a FAT32 partition with a 32KB cluster size. The 2nd partition is 1.5GB and is a EXT4 partiton.
For DataOnEXT I copy the rom to the sd card and then put the sd card back in my phone.
I run the HD2 Toolkit to install Recovery Version-TouchRC1 using 350MB or 400MB system size and a 20MB cache size.
I run the Recovery and install the rom.
For NativeSD I copy the rom and 4ExtRecovery 2.2.7 to the sd card and put the sd card back in my phone.
I start the phone and select the bootsettings and change it to 4Ext.
I install the rom using 4ExtRecovery, then restart the phone and change the bootsettings to NativeSD
That are the steps I follow. I don't understand what I'm doing wrong. The roms I tried are: NexusHD2-JellyBean-CM10.1 V2.1, NexusHD2-JellyBean-CM10 V1.4a and the TouchWizMOD_v2.1.
try to use 4ext-recovery to partition your sd card instead of using minitool. i have same problem before.
Sent from my NexusHD2 using xda app-developers app