TMOUS HD2 Stock
When my wife slides here display to unlock, the next screen should be sense with clock and weather background.
What happens is the start screen shows immediately, even when we select the lock at the bottom, it works one time, the reverts back to start screen.
Any ideas?
Go to Settings/Menu/All Settings/Today/Items tab at the bottom of the screen. Make sure she has a check beside HTC Sense, you will have to scroll down a little in the box with all the options in it to see HTC Sense. If she has HTC Sense checked then back up all of her info with something like Microsoft MY Phone or SPB Back up. Then Hard Reset her phone by powering on the phone and holding the volume up and down buttons down while powering on. If this does not help then you have a hardware issue.
Related
Last night my XDA Mini S froze while using PIE, so I did a soft reset, put the phone down and went to sleep. Noticed this morning that it's stuck at the Windows Mobile splash screen - still in Landscape mode which is what I was using when PIE froze. Done another soft reset, same problem. My LEDs are flashing as usual, one green and the Bluetooth one.
Any ideas?
Thanks
Ok, it started working for some reason - but I noticed when it got to my today screen that my NotesToday plugin wasn't there. I went into Settings > Today > Items, and NotesToday was ticked. I unticked it, clicked OK, then re-ticked it and it showed up again on my today screen. Fine. However now everytime I press the power button to come out of sleep mode, my Today screen flashed up fine for about 0.5 sec, then flashed white for a millisecond, then comes up fine EXCEPT the whole "top" bar (i.e. the part of the screen with Start button, clock, signal strength, etc) stays solid white, and I can't see any of those icons. Rest of the screen is fine. If I click Unlock, the whole screen is fine after that.
Help!
I had a similar problem with a different part of the screen staying white after coming out of hibernate (the O2 active UI sidepanel)...Hard reset fixed it and the problem hasn't returned (although I don't use the O2 UI now...)
If your device freezes on the Windows loading screen, then soft reset it and while it is loading the next time, press one of the hardware buttons, such as the D-pad or the green or red phone buttons, continually as it loads. This should keep the lights behind the buttons turned on, and it should load Windows without a problem.
Had the same error on my phone, I think it tries to hibernate as it loads Windows or something equally stupid. Pressing a button continually prevents this and allows it to load normally.
very strange, i have just noticed that my phone lock screen is now gone.
when i hit the hang up/power off button instead of locking the screen it goes black but when i hit another button it comes right back to the main today screen but no lock screen. bit of a problem when it does in the pocket.
any help??
hi
start - settings - menu -all settings - lock -(untick prompt if phone unused for) ----follow instructions -- reboot
regards
op
hold down your power button and lock the screen using that, then when you put the phone back into sleep it will wake up locked.
You may have to do this everytime after a reboot. Eventually mine sorted itself out and I no longer have to do it
This happened to me after I installed the HTC SMS patch. It also makes it so you can only preview your emails and not go into it by selecting. Installed and hard reset twice thinking it was a fluke. Nope.
i got the lock screen back by going to Settings / Change background of lock screen, then softreset. don't know why it went missing and why i got it back doing this... but it worked.
I got my HD2 in hong kong:
manila:1.0.19211620.0
rom:1.72.831.1 (82124) WWE
OS: 5.2.21869 (2.1869.5.0.082)
so after installing the cab i noticed that everytime i tried to put the music player on the first homepage above the main page, i would encounter a manila problem and then the top left of my screeen would be replaced by a white box. thereafter, the music player and white box would be stuck on the screen even if i change homepage tabs.
but my main problem is that the phone will always freeze very frequently. It happens a lot after i lock my screen. I will press a hardware button and the buttons will light up but the screen will take a while to turn on (if it even ends up turning on). And even if it does, all i see sometimes is the notification bar at the top of the screen where the battery, reception and wifi info is. Sometimes i can click the start menu key or the screen key and access the start menu but not always.
another problem is that somtimes when pressing a key after hte phone has been locked and screen turned off, it will reappear at the last screen i was after before locking the phone. it may then suddenly go to the lock screen, or just freeze there.
another problem i have is that after soft resetting, it takes a REALLY long time to "load htc sense". sometimes the text telling me its loading will disappear for seconds and reappear. i have had a point where sense just refused to load so i had to reinstall the cab. luckily for me at the time i was still able to access the start menu.
also, sometimes when i'm just using my phone in general, the screen will freeze and then the phone will go back to the "loading htc sense" page. For the most part, htc sense does load in this situation
now the phone runs very slowly and glitches between previously viewed pages. the camcorder barely runs..
it seems that many things trigger the phone to freeze but its always the same things that do.
i would appreciate any help from the developers or anything with experiences that are like mine.
i know my manila version is off but i asked someone in a different thread and he said that my manila version should be compatable.. if it is not, i guess i have no choice but to uninstall it.. shame
if so, could someone tell me how to uninstall? thanks
After doing a hard reset on my perfectly-functioning Pro the other day, the screen and buttons have now stopped working. My question is two-fold:
1. What the heck is going on?
The phone worked fine until I did the hard reset. Now, when I do a hard reset, everything appears to work correctly through the screen-alignment. The screen responds properly at that stage. Immediately afterward, the normal Today screen pops up for a split second. After that, the "Treo Customization" screen comes up, and that's where it all goes to hell. After the "Treo Customization" runs its course, the phone says "tap screen to reset." After tapping the screen, the phone responds and resets itself.
After that, a blank today screen appears. The tool bar on top is there and the background is there, but that's it. The screen and buttons are unresponsive except to brighten the screen after it periodically dims. Several other functions continue to work. I can activate wifi via the side button. The top button turns off the screen. Strangely enough, the QWERTY keyboard is completely unresponsive, except that the search button works (alt button and magnifying glass).
Does this sound like a hardware problem? Could it be fixed with a flash and new rom?
2. I tried to flash the phone and install a new rom to see if that would help, but I was unsuccessful for the following reasons: 1) When I run PANTHER_CDMA_HSPL_V101, the bootloader screen appears, but immediately upon that occurring, my sync connection disappears, so I can't proceed through my computer. 2) I can't run the manual flash program (SSPL-Manual-PantherCDMA) because I have no functioning controls on the phone itself.
Any ideas? Is there any way to achieve a flash on an unresponsive phone, or should I start shopping?
Thanks!
Mark Pemberton
I have a g2 that is broken and I need help getting some things off of it.
the phone works except the screen wont come on. The touch screen works but I cant tell where I am touching.
i want to use Droid Explorer to allow me to use the screen emulator but there is one catch...
My wife never turned on the USB Debugging.
I would like a few screen shots of the STOCK G2 from TMOUS
1) I need the home screen with the menu button pressed
2) The settings screen... If "applications" fits in the first screen then just that screen... If it is below the screen then could you show me a shot of the last item on the first screen scrolled to the top so as to be able to see where "applications" will lie.
3) The shot of the "applications" page and where "USB Debugging" is
Thanks!!!!!!
Don
Well I'll try and help (My replacement got the 2.3.3 update so no root)
If you can get into settings swipe down hard so you know you're at the top of the page. From there Applications should be lateral from where the charging port is on the side. Tap the same spot for development, and USB debugging should be lateral from the top of the volume up button and tap anywhere on that line (At least on GB) and it should come up with a pop up. Now put your finger right above the home button and just tap in a straight line up and stop before you get to the middle of the screen and USB debugging should be enabled. ( The phone is upright during this, make sure phone is unplugged during this or it may go to the USB storage screen, just hit back in that case and continue with your phone above the home button.)
Let me know if you need more help.
Just did it with my eyes closed so works from my end =p
Thanks!!!
That worked!!! Thanks!!!
Now we are cookin!!
My wife says thanks!!
Don