[Q] change language from english to french

[Q] change language from english to french - HD Mini General

Hi everyone,
i have an HTC mini HD with the following software: OS version: 5.2.23103 (23103.5.3.3), ROM version: 1.10.161.1 (86611) WWE and i want to change language from english to franch.
thankyou.

Hi...
use the French version of this ROM:
http://forum.xda-developers.com/showthread.php?t=801481
you have to use SSPL to update your ROM:
http://forum.xda-developers.com/showthread.php?t=694409
read carefully before update and make a backup of your Contacts and/or tasks and calendar
Attention: YOUR DEVICE HAS TO BE UNLOCKED and preferably have your Original ROM in case of problem...!
you can find your Original ROM in htc.com / support (from your device region).
and the instruction:
1- your device has to be ON and have at least 50% battery
2- connect to your PC and wait to have the green "connected" icon on active sync
3- run sspl_mini >>>> you will get a message on your device click YES as fast as possible!
4- your device will go to a tricolor screen and you will get an error again on SSPL.
5- DO NOT PANIC! your device will stay on tricolor screen and will have USB down the screen
6- restart SSPL and follow instruction....
7- New rom will install!!!!

Related

Problem with Wizard ...

Hi to all. I'm a new person in this fantastic forum. Before yesterday i'm just visiting and reading, but now i need your help
So, I have a Wizard with T-mobile logo on it. Display has been changed, 'cause the original was broken. New display has been buyed from *-bay. Both displays are the same. When put the new display in the Wizard, everything looks fine, except the 8-bit color on the skreen ;( . Last night i read and make step by step things in this Thread: http://forum.xda-developers.com/showthread.php?t=298613 , but i need to stop on step G3.4 - i have a success update from step G3.3 with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE, but when i start the Wizard_Love_2.26.10.2_WWE_Novii_CF2, there is an error - 206 (on italian).
After that, i have read the http://forum.xda-developers.com/showthread.php?t=285435 thread, and started again... First update has been successfull (maybe), the Wizard started with Winmobile 5 (WM6 has been installed before starting updates).
That's the specs:
ipl: 1.01
spl: 1.01
rom date 2/02/07
radio: 01.12.10
rom version: 6.0.0.0 wwe
protokol version: 4.0.13.23
extRom version: Empty Extended (before updating)
Now, after 1st update are:
ipl: 1.01
spl: 1.01
ROM:1.5.4.2 WWE
ROM date: 11/8/05
Radio: 01.12.10
Protocol version: 4.0.12.23
------------------------------------------------------------------------
And now... i haven't idea what to do to update IPL and SPL to version 2.xx
and to install WM6 (XDA Mobile 6 Release 3).
Else, I think that the screen has only 8bit color is not a software problem. I think it's from hardware (display).
Else, i have install ActiveSync, but the program did not find any Wizard attached to the computer..
For first update, i connect and started wizard in bootable mode (3 color display, with 'usb' icon down left...
After restart, when starts normally, AS 4.5 didn't find it...
Can somebody explain me in a few simple steps what to do...
Please..
I'm new in this sphere. Sorry for my bad english.
Have a nice weekend to all.
Here -> http://www.snimka.bg/album.php?album_id=234481 <- are 3 pictures from wizard. 8bit color loooooks very very badd

Lattante said:
Hi to all. I'm a new person in this fantastic forum. Before yesterday i'm just visiting and reading, but now i need your help
So, I have a Wizard with T-mobile logo on it. Display has been changed, 'cause the original was broken. New display has been buyed from *-bay. Both displays are the same. When put the new display in the Wizard, everything looks fine, except the 8-bit color on the skreen ;( . Last night i read and make step by step things in this Thread: http://forum.xda-developers.com/showthread.php?t=298613 , but i need to stop on step G3.4 - i have a success update from step G3.3 with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE, but when i start the Wizard_Love_2.26.10.2_WWE_Novii_CF2, there is an error - 206 (on italian).
After that, i have read the http://forum.xda-developers.com/showthread.php?t=285435 thread, and started again... First update has been successfull (maybe), the Wizard started with Winmobile 5 (WM6 has been installed before starting updates).
That's the specs:
ipl: 1.01
spl: 1.01
rom date 2/02/07
radio: 01.12.10
rom version: 6.0.0.0 wwe
protokol version: 4.0.13.23
extRom version: Empty Extended (before updating)
Now, after 1st update are:
ipl: 1.01
spl: 1.01
ROM:1.5.4.2 WWE
ROM date: 11/8/05
Radio: 01.12.10
Protocol version: 4.0.12.23
------------------------------------------------------------------------
And now... i haven't idea what to do to update IPL and SPL to version 2.xx
and to install WM6 (XDA Mobile 6 Release 3).
Else, I think that the screen has only 8bit color is not a software problem. I think it's from hardware (display).
Else, i have install ActiveSync, but the program did not find any Wizard attached to the computer..
For first update, i connect and started wizard in bootable mode (3 color display, with 'usb' icon down left...
After restart, when starts normally, AS 4.5 didn't find it...
Can somebody explain me in a few simple steps what to do...
Please..
I'm new in this sphere. Sorry for my bad english.
Have a nice weekend to all.
Here -> http://www.snimka.bg/album.php?album_id=234481 <- are 3 pictures from wizard. 8bit color loooooks very very badd
Click to expand...
Click to collapse
You have downgraded your phone to IPL/SPL 1.xx by flashing Button's Rom 1.05.there's no need to flash wizard_love_Rom,instead download and apply lokiwiz02b tool to SIM/CID unlock the phone and then download T-mobile 2.26 and flash to upgrade to IPL/SPL 2.xx for upgrading to wm6.The above guide was written quite a while ago,its better you follow the most updated guide as in the link below:-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies

Thanks a lot zabardast_1, but I have 1 problem - Activesync didn't find any Pocket, attached to the computer, so i can't make the steps in the tutorial.. the pocket is SIM unlocked.

Lattante said:
Thanks a lot zabardast_1, but I have 1 problem - Activesync didn't find any Pocket, attached to the computer, so i can't make the steps in the tutorial.. the pocket is SIM unlocked.
Click to expand...
Click to collapse
Is your phone working normal,does it load up to OS ? to check the connectivity,get the phone into bootloaders(tricolor screen) connect via usb cable and check if usb appears at the bottom of the bootloaders,if not then there's a connectivity problem,either with usb cable or the mini usb port of the phone.

if the phone works normal and loads OS,then you can even try to use lokiwiz02b or WST tool via BT and CID unlock the phone.

It's normal working, like I said in my 1st post - 8bit color. I think it's from OS, but i'm not sure - i have downgrade form WM6 to WM5, and the problem is still here .
In bootload mode have indication for USB - bottom left on the screen, the battery has charging, but ActiveSync still don't want to find my Wizard..
P.S. Pfffff, I decline to fight with that.... Monday i'll test with other USB cable. Even it charging battery, i think ActiveSync can't recognize the Wizard, because USB cable is failed somewhere,...
I don't know what i think.. I'm tired.... Good night..

If its working normal and it establishes connectivity through usb as it appears in the bootloaders,then,its the AS software,which is not detecting.Assuming you are using winXP,Delete all partnerships/profiles in the settings of the AS or Uninstall As and download the latest version 4.5 and install it,close any Antivirus/Firewall or any other software which might be hindering with AS and let it again activesync.Also remember to uncheck 'Enable advanced network functionality' in the settings...> connections...> usb to pc options in your phone.

Hello again. I try to install 3 versions of AS, but the result is the same - No Connection. reset the wizard 3 times, stop all running software - ICQ, Skype, antivirus, browser... no and no.
When AS looking for device, there is 7 8 COM ports, Infrared (no installed), USB available, but AS can't find my bluetooth...
I have install bluetooth, and make connection with the wizard, but i can't unlock with lokiwiz02b-HTC Unlocker.

Better try on other winXP based pc

I think so, tommorow at work zabardast_1 thanks a lot man.

HTC Opal Offical Rom

HTC Touch Viva English ROM Code Update (10/21/08)
ROM version: 1.27.707.1 WWE
ROM date: 09/23/08
Radio Version : 4.1.13.66_03.29.90
* You can check device ROM version from Start -> Setting -> System -> Device Information -> Version.
Description:
1. Update the startup page of Opera in the internet tab
2. Fix Macau CTM weather update query
IMPORTANT! - please read these instructions carefully before updating your device
1. VERY IMPORTANT! - All files and software on the device will be lost after the update. Please ensure a copy of your important files is backed-up somewhere else.
2. Download the .exe file.
3. The ROM Code can only be updated on HTC Touch Viva English Version Device
4. Ensure Activesync v4.5 (or higher) is installed on PC/laptop for OS WinXP and below. For Windows Vista and above there is no need to install ActiveSync.
5. Connect HTC Touch Viva to PC/laptop.
6. VERY IMPORTANT! - Ensure your device is connected properly to the PC/laptop.
7. Make sure the battery is charged to at least 50%.
8. Double-click on the .exe file to run the update utility.
9. Please close all programs on your PC/laptop when running the update utility.
10. VERY IMPORTANT! - Do not unplug the device when the update process is running, doing so may damage the device.
11. After updating, the device will reboot, this is normal.
12. After ROM code update, application installed from "Application Disc" will no longer exist. Please re-install from Disc and follow origin steps when you first use.
link:
http://210.64.124.194/download/RUU_....707.1_infineongsm4.1.13.66_03.29.90_Ship.exe

can i install this rom on my htc p3350(love)???
hi
i just want to ask that can i install this rom on my htc p3350(love)
and if i can... then i want to ask how dose fm radio work because htc touch viva dosn't hv fm radio....
Thanks

Also Hongkong CHT official ROM found HERE

@911sniper
Thx mate, i m looking for the traditional chinese rom for a long long time, coz i want port the built-in chinese input to my KS20
Thank you so much

zhl822 said:
HTC Touch Viva English ROM Code Update (10/21/08)
ROM version: 1.27.707.1 WWE
ROM date: 09/23/08
Radio Version : 4.1.13.66_03.29.90
* You can check device ROM version from Start -> Setting -> System -> Device Information -> Version.
Description:
1. Update the startup page of Opera in the internet tab
2. Fix Macau CTM weather update query
IMPORTANT! - please read these instructions carefully before updating your device
1. VERY IMPORTANT! - All files and software on the device will be lost after the update. Please ensure a copy of your important files is backed-up somewhere else.
2. Download the .exe file.
3. The ROM Code can only be updated on HTC Touch Viva English Version Device
4. Ensure Activesync v4.5 (or higher) is installed on PC/laptop for OS WinXP and below. For Windows Vista and above there is no need to install ActiveSync.
5. Connect HTC Touch Viva to PC/laptop.
6. VERY IMPORTANT! - Ensure your device is connected properly to the PC/laptop.
7. Make sure the battery is charged to at least 50%.
8. Double-click on the .exe file to run the update utility.
9. Please close all programs on your PC/laptop when running the update utility.
10. VERY IMPORTANT! - Do not unplug the device when the update process is running, doing so may damage the device.
11. After updating, the device will reboot, this is normal.
12. After ROM code update, application installed from "Application Disc" will no longer exist. Please re-install from Disc and follow origin steps when you first use.
link:
http://210.64.124.194/download/RUU_....707.1_infineongsm4.1.13.66_03.29.90_Ship.exe
Click to expand...
Click to collapse
can this ROM be flashed on my eflin???

bokechukwu1 said:
can this ROM be flashed on my eflin???
Click to expand...
Click to collapse
no way......

911sniper said:
no way......
Click to expand...
Click to collapse
i just realized what i asked sorry for the stupid question.....my appologies

some one plz help me
some one plz tell me, can i install it on my htc p3350
thnks

What OS/Build is this rom??

Anyone got the tradition chinese rom for Jade? pls share it in the Jade forum section

Can I install this on my HTC Touch??

Could anyone port it to Elfin, like Opal R2?

http://forum.xda-developers.com/showthread.php?t=446446
Run the hard spl and you can install this on any one.
WC

FYfans said:
Can I use this Rom on my Elfin?
Click to expand...
Click to collapse
No,only used for Opal(Touch viva).

nhatt said:
No,only used for Opal(Touch viva).
Click to expand...
Click to collapse
Not even if I Run the hard spl & RUU?

FYfans said:
Not even if I Run the hard spl & RUU?
Click to expand...
Click to collapse
Yes, all right just so,only used on HTC Opal.

nhatt said:
Yes, all right just so,only used on HTC Opal.
Click to expand...
Click to collapse
Thank you.
Would you happy to know where I can find a Opal CHT cooked Rom? I have been looking & looking

Also, May I ask how to get a .nbh from the original Opal Rom?

FYfans said:
Thank you.
Would you happy to know where I can find a Opal CHT cooked Rom? I have been looking & looking
Click to expand...
Click to collapse
but....you using HTC ELFin ,why do not come to ELF thread?
If you needing Opal cooked rom with WWE build 20764.1.4.3,here you go:
http://www.pdaviet.net/showthread.php?t=40132

Help - newbie wants to upgrade

Hi all.
I start by contemplating the fact that there are quite some portuguese members arround.
Força Portugal
I just got hold of a O2 Xda Orbit. It has windows mobile in english and I want to put it in portuguese.
I don't know how
I have been reading about the ROM's in portuguese but I am afraid of just upgrading without knowing what I am doing.
That is why I am now requesting you guys to point me in the right direction
Device Information:
ROM Version: 3.4.206.2 WWE
ROM Date: 4/18/2007
Radio Version: 02.67.90
Protocol Version: 4.1.13.28
-
Also I don't have (yet) ActiveSync installed on my computer... do I need it?
thank you in advance...
Tiago Geada
cusco

Brief step by step plan
vigaro said:
Hi all.
<question>
ROM Version: 3.4.206.2 WWE
ROM Date: 4/18/2007
Radio Version: 02.67.90
Protocol Version: 4.1.13.28
Also I don't have (yet) ActiveSync installed on my computer... do I need it?
cusco
Click to expand...
Click to collapse
You do need ActiveSync for XP or older, or Windows Mobile Device Center for Vista (download the latest version from Microsoft).
In general you have to do the following steps:
1. Connect your Artemis to the computer using a USB cable.
2. Do NOT make a partnership. If you get a wizard or popup, just cancel/quit it.
3. obtain the rom of your choice (it sounds like you've allready found a PTG rom)
4. make sure your Artemis is CID unlocked. If not, use artemis USPL for this.
5. run RUU.exe or RomUpdateUtility.exe which is usually provided with the rom. If not, find a recent version HERE. If you use a RUU.exe not provided with your rom, just remove the old rom (a large file with the extension .nbh) and put your rom in the folder with RUU.exe
6. Follow steps on the screen. Read the information / caution rules, press next a few times, then press update.
7. The Artemis will go into boot loader mode (first a three color screen, then a grey one with a white/blue progress bar)
8. wait some time, until the wizard says you're finished
9. The Artemis will reboot. Wait for it to completely start windows, then do a hard reset (push both softkeys and the reset button, release reset button after a few seconds). This way you make sure your rom gets flashed well
10. Wait for the progress bar to end again and for windows to start
11. Start calibrating your screen and customising windows to your needs.
This should do it

Htc hd2 spl-3.03.0000

Hi,
I hope you can help me and although I have my cell phone HTC HD2 get but with SPL 3.03.0000 I would like Android rom instalation but before I do so with HSPL3 THE ERROR IS NOT flash is what I have to do one probably you have an idea ?
MFG
Windeck
I'm sorry I'm not that perfect in English I am from Germany.

ibrahim-windeck said:
Hi,
I hope you can help me and although I have my cell phone HTC HD2 get but with SPL 3.03.0000 I would like Android rom instalation but before I do so with HSPL3 THE ERROR IS NOT flash is what I have to do one probably you have an idea ?
MFG
Windeck
I'm sorry I'm not that perfect in English I am from Germany.
Click to expand...
Click to collapse
SPL 3.03 isn't compatible with HSPL sir.
But you can run Android on your Stock Rom 3.14!

Hmm. I've got spl 3.03.0000, can run android from sd... But am getting the 'robot voice' on calls, even though I hit CLRCAD before running Android.
Any ideas?
Cheers,
cP
Edit... Just tried a different version of android & it works perfectly. No HSPL req'd.
FroyoStone_sense_v3.2

somaking said:
Hmm. I've got spl 3.03.0000, can run android from sd... But am getting the 'robot voice' on calls, even though I hit CLRCAD before running Android.
Any ideas?
Cheers,
cP
Edit... Just tried a different version of android & it works perfectly. No HSPL req'd.
FroyoStone_sense_v3.2
Click to expand...
Click to collapse
Hi, I am a complete n00b at this but I have spl 3.03.0000 as well on my HD2 and I want to run android with sense - considering the FroyoStone Sense v3.2 like you have.
Before anyone completely grills me... I've done my research and downloaded everything I needed up until I came across a few posts on xda about not needing HSPL3 and radios etc if I had spl 3.03 on my phone because Android can run on spl 3.03.
I came across this post and didn't want to miss the opportunity to ask. So my question is, do I still proceed with flashing HSPL3, installing a radio, flashing a custom WinMo rom (ie. Energy's rom), format sd card and putting Android on it, then do the CLRCAD and haret to run Android?
Or (correct me if I'm wrong), can I simply format my sd card and put Android on it and do the CLRCAD and haret in order to run Android, without doing anything to my phone?
I do appologize for being long winded, it seems like we both have the same spl 3.03 and want to use FroyoStone Sense v3.2, and since you got it to work, I wanted to know how you did it.
Any help would be must appreciated,
Cheers!!

When you have SPL 3.03 on your device, don't tray to install HSPL. installing HSPL over SPL 3.03 isn't possible.
and installing a SPL 3.03 ROM over HSPL will limit your program memory to +/- 50Mb. (except on T-mous devices)
Android is compatible with latest stock ROM (SPL 3.93 / Radio 2.15)
If you have robotic voice, try to change the Kernel version.
You don't need to do something special on your device in this condition. Just format your SD card and put Android on it, and run the CLRCAD and haret in order to run Android.

Nah, is there any chance to install cooked rom on SPL 3.03? I had a problem with volume up button, it didnt work and I gave HD2 to HTC and they returned it to me with SPL 3.03 not 1.66 as I had before. :/

Creativus said:
Nah, is there any chance to install cooked rom on SPL 3.03? I had a problem with volume up button, it didnt work and I gave HD2 to HTC and they returned it to me with SPL 3.03 not 1.66 as I had before. :/
Click to expand...
Click to collapse
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.

Is it possible to downgrade software? For example if I'm running 1.66 now and wish to try the newest rom but find that I do not like it, could I downgrade back to 1.66?

west_widgeon said:
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Click to expand...
Click to collapse
Thanks dude, I'll give it a try right now.
EDIT:
IT WORKS! BIG THANKS!

west_widgeon said:
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Click to expand...
Click to collapse
What if i need to go back to the stock ROM, do i need to run stock rom again or just use the wipe all function?

Ask how to install android for a European version of HD2
I want to install android for my running HD2 ship rom 3.14.707.3,
2:15 radio contest to select the appropriate version of android to do, I heard that Android can run on hd2 (512) HSPL forward without your help, many thanks.

Same Rom other Problem
Sinds i have the 3.14 stock rom from HTC i get a the error i cannot install unsigned apps, and so i cannot run Android roms etc..
What is the easyst way to fix this.
Marc.

Here it is what happens one more time, maybe you can spot the mistake.
Disable USB connection.
Windows 2008 (Vista) >>> followed guide to change driver >> driver changed.
Enable USB connection.
Activesync fine, synched one last time.
Unzip [P3600i] HardSPL v1.1
Start ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next > Next >
it shows > Image version : 3.00.707.17
Update.
From : Image version : 3.00.707.17
To : Image version : 3.10.Olipro (not 3.20)
Next , next
phones goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.10.Olipro
ROMUpdateUtility.exe says ERROR 260 > Exit
Unplug ...
Start same ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next ,
Plug in .. still tri colour >> shows USB
Next
ROMUpdateUtility.exe shows : Image version : blank / Only Update button.
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next . .next
Goes gray progress bar stays 0%
Utility is working .. says updating ...
Phone still gray + 0%
Utility says ERROR 262 : UPDATE ERROR
Recovery.
Asks to unplug phone from USB (phone still gray 0%)
Next .. asks to take out battery.
waited 3 seconds as asked. Placed battery back.
On start phone goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.03.0000
Recovery asks to plug back in.
Next ..
Image version : blank , Update (only possibility)
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next , Next
Phone goes gray and jumps from 0% to 100% (bar is dark green btw).
phone reboots into Windows as if nothing happened.
ROMUpdateUtility.exe shows : ERROR 270 (UPDATE ERROR) , The image file is corrupted please check your Update utility.
Exit.
Phone boots old windows .. Tricolor shows original SPL.

Did you run the ROMUpdateUtility.exe as Administrator???
You MUST run it as Administrator or it will not work correctly.
juniogyn said:
Here it is what happens one more time, maybe you can spot the mistake.
Disable USB connection.
Windows 2008 (Vista) >>> followed guide to change driver >> driver changed.
Enable USB connection.
Activesync fine, synched one last time.
Unzip [P3600i] HardSPL v1.1
Start ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next > Next >
it shows > Image version : 3.00.707.17
Update.
From : Image version : 3.00.707.17
To : Image version : 3.10.Olipro (not 3.20)
Next , next
phones goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.10.Olipro
ROMUpdateUtility.exe says ERROR 260 > Exit
Unplug ...
Start same ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next ,
Plug in .. still tri colour >> shows USB
Next
ROMUpdateUtility.exe shows : Image version : blank / Only Update button.
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next . .next
Goes gray progress bar stays 0%
Utility is working .. says updating ...
Phone still gray + 0%
Utility says ERROR 262 : UPDATE ERROR
Recovery.
Asks to unplug phone from USB (phone still gray 0%)
Next .. asks to take out battery.
waited 3 seconds as asked. Placed battery back.
On start phone goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.03.0000
Recovery asks to plug back in.
Next ..
Image version : blank , Update (only possibility)
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next , Next
Phone goes gray and jumps from 0% to 100% (bar is dark green btw).
phone reboots into Windows as if nothing happened.
ROMUpdateUtility.exe shows : ERROR 270 (UPDATE ERROR) , The image file is corrupted please check your Update utility.
Exit.
Phone boots old windows .. Tricolor shows original SPL.
Click to expand...
Click to collapse

HELLO
I have a problem when a install android in my HD2 in SD card... when i run it, it works well but when a try to take a photo or someting like that e gave me an error in SD card...
can any one help to resolve the problem?

flopesneves said:
I have a problem when a install android in my HD2 in SD card... when i run it, it works well but when a try to take a photo or someting like that e gave me an error in SD card...
can any one help to resolve the problem?
Click to expand...
Click to collapse
With some more information it will be easier to help.
Witch Android build are you using?
Witch error do you received?

HI
Iḿ sorry...
I have a SD card of 2Gb
when i restart my HD2 it sais:
R 2.15.50.14
G 15.42.50. 1 1U
D 3.14.04666
I've install the file: SuperRam.Sense_V0.1 like in this link: w
ww.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
and it works but when i try to take a photo it sais "insert SD card"
when i go to the gallery it sais "SD card unmounted"
Please can you help me? or gave me instructions to install android with XDA developers files...
Thanks
kurt-willems said:
With some more information it will be easier to help.
Witch Android build are you using?
Witch error do you received?
Click to expand...
Click to collapse

flopesneves said:
Iḿ sorry...
I have a SD card of 2Gb
when i restart my HD2 it sais:
R 2.15.50.14
G 15.42.50. 1 1U
D 3.14.04666
I've install the file: SuperRam.Sense_V0.1 like in this link: w
ww.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
and it works but when i try to take a photo it sais "insert SD card"
when i go to the gallery it sais "SD card unmounted"
Please can you help me? or gave me instructions to install android with XDA developers files...
Thanks
Click to expand...
Click to collapse
Maybe a suggestion, try a other Android build.

HI
kurt-willems said:
Maybe a suggestion, try a other Android build.
Click to expand...
Click to collapse
The problem is... I don't know what is another android build... but cam you help me to install another android build in my HD2... I'm sorry but i don't speak very well english so it's a little dificult to understand techinal terms

flopesneves said:
The problem is... I don't know what is another android build... but cam you help me to install another android build in my HD2... I'm sorry but i don't speak very well english so it's a little dificult to understand techinal terms
Click to expand...
Click to collapse
the android builds on the hd2 android development subforum are all sd card builds, you can try any one of them

[Q] Should I flash it or no??? Help please

So my HTC Blackstone is going crazy.I changed battery & touch screen and after that cam went crazy.I saw all kinds of colou's on cam but that's not a problem because I use it rarely.What bothers me is that I locked myself out of it.I was setting up screen password early in morning and I don't know what did I typed in.How can I solve this???
I'm thinking to flash it but when I was looking at flashing instructions I saw that I need to Sync it with my computer in Windows Mobile Device Center.But I cant sync it since I cant log into the system.I installed all drivers on my PC and when I connect it via USB it detects it automatically.
I wanted to reset HTC to factory defaults but I cant I did Hard Reset but when I do it I come to that 3 color screen and cant go further than that.
When HTC is disconnected and I'm in 3 color screen on the bottom it says "Serial",when I connect it to USB it says USB.
So basically I'm stuck and I need advice,what to do???
Can I flash it without sync it with Windows Mobile Device Center???
Or is there other way around this problem!
Thank you in advance for your help! :good:

For flashing a new ROM, there is no need to sync with Windows Mobile Device Center. However, you will need Microsoft .Net 3.5 SP1 to connect to Blackstone. I am guessing you are using Vista or Win 8, so you may have to do a separate install for it.
I recommend that you use a ROM from this thread, which is the most updated on this website. I am using it, and it is very stable. I had used the Android version, and it is user and finger friendly.
http://forum.xda-developers.com/showthread.php?t=1719627
Caution: Make sure Blackstone has at least 70% battery-life
Step 1. Update HSPL to 1.56 Olinex
1a. You will need to update the HSPL (effectively, unlocking your phone) to 1.56 Olinex. Follow the instructions found in the above thread, under a heading:
Dummies guide flashing 1.56+ roms: http://forum.xda-developers.com/showthread.php?t=505377
1b. Follow the instructions very strictly. It can get tricky, but it is worth the effort.
Step 2. Download custom ROM
2a. Go to the Download site, and in Mediafire site, go to the folder:
0.77_WM_653_WEH_Orange_ROM
2b. Inside the folder, you will find this ROMs for download, for example:
ORANGE ROM [1-October-2013] - 0.77 [Full - Cookie 2.0_Android] WM6.5.3 WEH.zip
2c. Download this file and extract the files.
BlackstoneAdvancedRUU.exe
RUU_Signed.nbh
2d. Copy the "RUU_Signed.nbh" file to the Root of your Blackstone microSD and rename it to "BLACIMG.NBH. Do not insert it into Blackstone yet.
Step 3. Wipe existing Blackstone ROM
3a. Reboot your Blackstone to Tri-color screen and connect to PC by USB.
3b. On PC, run the program "BlackstoneAdvancedRUU.exe". Select Task 29 do it. This will do a clean wipe of the Blackstone ROM (which you said has been corrupted.
3c. Once the Task 29 is completed,
Switch off Blackstone.
Disconnect USB cable from Blackstone.
Insert the microSD (with the BLACIMG.NBH file) to your Blackstone.
Step 4. Install custom ROM
4a. Switch on your Blackstone to Tri-color mode.
Very shortly, you will come to a screen to ask if you want to update the ROM file.
Press the Power button to update
4b. The rest of the update will be done automatically.

Database Users

welcome