Database Users

HELP!! stuck after sbf

I've used rsd lite several times before and have not had any problems. I just recently ran it on my phone but i accidentally used the old .sbf file instead of the one for the updated firmware. I tried using the new .sbf file afterwords and its stuck and wont boot. what do i do?!?! please help

what is says on my screen is:
Bootloader
30.04
err:A5,70,70,00,1f
mew_map blank
service req'd
battery ok
ok to program
transfer mode:
usb

Which "old" sbf did you use and which "new" sbf did you use? Also what system version were you on prior to using either of the sbf files?

i was on the latest official ota update from verizon and ran the VRZ_MB810_2.3.15_1FF_01.sbf which is the old .sbf and the i ran the SHADO_X6_2.3.34_SYSTEM-ONLY.sbf which is what i thought to be the latest one

System only will do you no good at this point. You need to flash the FULL 2.3.32 sbf and yes it will work with the OTA.
http://www.mydroidworld.com/forums/droid-x-discussion/5633-droid-x-2-3-32-full-sbf.html

ok thank you soooo much, your a life saver. going to give that a try now and get back to you

[Defy] Stuck at Bootloader 09.10 - Err:A5,69,4E,00,41

I think the title kinda explains for itself!
From what I started and where I got?
Well, firstly, I tried to install 3.4.3-11 Motorola SBF with fixed Blur provided this link:
"Here you are, buddy
Fixed.SBF plus Nandroid of 3.4.3-11
http://www.multiupload.com/PB10JC9NQV"
(http://forum.xda-developers.com/showthread.php?t=966537&page=7)
I moved to the older PC still running Windows XP to manage RSD Lite 4.9 to work and recognize my Defy. (it apparently worked)
After wiping all data and cache, I started the phone in boot loader mode and tried to use RSD to load the SBF.
Everything seemed to be fine. But.....After RSD finished the update, it said for me to "turn on my Device". Well, it was already on and stuck at Motorola Logo.
I waited for quite some time, took a shower, smoke a cigar.... And, when I came back, nothing, phone was still on moto logo.
I force restarted the phone removing the battery. Still got stuck at moto logo for quite some time.
Sooooo, I decided to wipe everything again and try to install the SBF again, this time with the one provided by "Pays Rom" thread.
That was when stuff got bad.
After that, I got stuck at Bootloader with a "error code" indication.
Alright, it was time to read some more cause I realized I fked something up! Then, I find out I could load a Devtree SBF and that would unbrick the phone being able to install another SBF.
No succecs, eventhoug I tried to load those previous SBF, I still got problems either with RSD Lite or got stuck at bootloader with a that "error code" problem.
As I didnt know what else to do, I loadead back the devtree and got that different error code on the phone. (one mentioned on the thread title).
And, this is pretty much my whole problem! lol
Any Ideas what should I do?
My Defy is from Brazil - Claro and was running 2.1 android at the beggining!
Tyvm!

it seems like we get the similar Err,my defy also stuck at bootloader Err,my Err code is a5 69 35 00 27,if you have solved the problem,please tell me something about it.

oct307 said:
it seems like we get the similar Err,my defy also stuck at bootloader Err,my Err code is a5 69 35 00 27,if you have solved the problem,please tell me something about it.
Click to expand...
Click to collapse
Nothing yet.
Still trying to boot anything in it. If I ever find something, I'll let you know!
I'm getting this error now on RSD Lite when trying to load the SBF 3.4.3-11
Failed Flashing process. Phone[0000]: Error flashing subscriber unit. Device API Error: 0xE003003F Adress: 0xB2383000 Command: ADDR (0xE023203F), phone conected
New error code prompted on Bootloarder:
Err:A5,70,39,00,27
Now it shows Motorola logo for a few seccconds.
Stuck at code 39 or smthing while trying to install another SBF (the one with PAys Rom)
Ok, it unstucked, now RSD shows "restarting" and the motorola logo is on screen.
Finally, it loaded.
I used Pays Rom after a few tries with the first fixed SBF and jumping to the Pays Rom SBF.
After sometime, it installed!!!!!
The phone just started!!!!!
How about your problem mate, wich point are u at?

To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.

pomah said:
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
Click to expand...
Click to collapse
Thank you!
I managed to find that out by myself, but thanks for the help!!
I noticed it was a not downgradable version, but I don't really care as it fits what I was aiming and I don't have any intetions of going back to 2.1!

pomah said:
To solve both of your problems:
download and install the original 3.4.3-11 sbf, no nandroid or anything else.
You should allways be able to get into the original motorola boot loader and from there install any of their SBF, but some of the sbf versions with android do not allow downgrader, therefore you should be sure to use the same version and not a lower one.
Click to expand...
Click to collapse
thank you very much!
i have used 3.4.3_11-Stock._BLUR.sbf，but it doesn't work!it's still be stuck at bootloader 09.10 Err:a5,69,35,00,27.
i don't know what's the meaning of the errcode

hello,
I also have a similar problem, stuck on the bootloader but I have the "low battery cannot program" error. When I try to charge the battery, the battery appears with a "?" inside...
Does anyone already get this problem ? Battery out of order ? software problem ?

Use the macgyver method with usb cables. Search the forum and be brave. I had the same problem
Sent from my MB525 using Tapatalk

lanfearxt said:
Use the macgyver method with usb cables. Search the forum and be brave. I had the same problem
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
this is the post: http://forum.xda-developers.com/showthread.php?t=892026&highlight=battery+charge

thanks for the link
it will help me saving my defy....

oct307 said:
thank you very much!
i have used 3.4.3_11-Stock._BLUR.sbf，but it doesn't work!it's still be stuck at bootloader 09.10 Err:a5,69,35,00,27.
i don't know what's the meaning of the errcode
Click to expand...
Click to collapse
I'm having this same problem.. anyone successfully fixed this?

try this
try apply this Full SBF 2.3 orange http://forum.xda-developers.com/showthread.php?t=1106375
or
2.1 SBF http://and-developers.com/sbf:defy
this is is a sign error in someone codegroup.

slayps said:
try apply this Full SBF 2.3 orange http://forum.xda-developers.com/showthread.php?t=1106375
or
2.1 SBF http://and-developers.com/sbf:defy
this is is a sign error in someone codegroup.
Click to expand...
Click to collapse
I tried a 2.1 SBF and it gave me a black screen.. the phone turns on, but keeps black.. so I re-flashed with a 2.2 sbf and got back to the same error..
Now I'm downloading the Orange 2.3 sbf file.. I dunno if it will work because I already tried 8 different sbf files

renatojf said:
I tried a 2.1 SBF and it gave me a black screen.. the phone turns on, but keeps black.. so I re-flashed with a 2.2 sbf and got back to the same error..
Now I'm downloading the Orange 2.3 sbf file.. I dunno if it will work because I already tried 8 different sbf files
Click to expand...
Click to collapse
I'm having this same problem.. anyone successfully fixed this?

neozhu said:
I'm having this same problem.. anyone successfully fixed this?
Click to expand...
Click to collapse
1) Try flashing on different PC to start fresh.
2) If you'd flashed so many sbf. You might not be able to remember them all. My guess is that you might be at froyo state(corrupted/failed system code), thus flashing another Eclair 2.1 sbf would not solve your issue. You must try on Froyo sbf only starting from bootloader mode and rsdlite 4.9 or 5.0.
3) Take note of your battery level as it might draining down while you attempting to put some resuraction on the device.
4) Try relax and take a bath and smoke a bigger cigar just like the OP of this thread did...

i too have this same problem, exept i dont know what ver i had and i flashed so many sbf. ive found some sbf that work but i get no signal.

JDM-Bb said:
i too have this same problem, exept i dont know what ver i had and i flashed so many sbf. ive found some sbf that work but i get no signal.
Click to expand...
Click to collapse
no signal..? have you try baseband switcher application..?

yes ive try that with no luck.

hELLO
Please, tell me how to solve that problem with bootloader error A5, 70, 39,00 27 in my defy?? You have said you solved it. please help

you need to be calm and cool with lot of patience. It takes upto 10 - 15 Minutes...
the flashing happens at the speed of your computer.
try to use original cables and use USB ports of your desktop motherboard or laptop without any extension cables.
keep your pc in NO SLEEP mode. Batter should be almost full before flashing ...these are some tips...

MS2 reboot only in Bootloader!

Hello,
I have a big problem. I misplaced my MS2 with a customrom Droid 2 installed. after which the phone is stuck at Moto logo, I wanted to flash it with RSD Lite again. But unfortunately it has made ​​all the worse. The screen then remained always black. By accident I found out that the master is always handy in the bootloader if I make the battery clean. the RSD Lite detects it again and then when I want to flash an SBF file he does it without problems. only then if he should make a reboot it ends up back in the bootloader. but i can´t see the bootloader. I know not what to do yet.
can anyone help me?
thank you
greeting

I didn't get quite right the situation but tell me which sbf are you using?
Is it the same android version that was before?
Have you tried pulling off the battery, waited 10 seconds, hold vol + and vol - (or X and arrow up, depending on android version) and powering up to enter the recovery and do a full data wipe? Does it starts normally after that?

Yes, it is the same as before sbf. I've been on it before GB and GB have also flashed.
at the first flash of sbf I'm also in the recovery menu and have a full wipe made ​​but which has unfortunately not have shown anything.
I thought that maybe Customrom a different bootloader has been on it so I downloaded the 70.13 bootloader and flashed.
Since then I have the problem that it only comes into the bootloader, and here again but I have only a black screen.
greeting

sir my advice is redownload your SBF.. maybe it got corrupted. and make sure you choose the right SBF.

devilbatghost said:
sir my advice is redownload your SBF.. maybe it got corrupted. and make sure you choose the right SBF.
Click to expand...
Click to collapse
hi Devilbatghost,
i redownload the SBF and its the right SBF.
i send it to Moto to fix it.
thanks for all.
greet

Original Milestone 2 SBF files
Can someone please tell me where I can get these original SBF files for my M2? I want to go back to the stock ROM for my phone.

Here:
http://and-developers.com/sbf:milestone2

the links for the sbf files are dead.

yes
those links are dead.
does anyone know of an alternate location for the sbf files?

xsghost said:
those links are dead.
does anyone know of an alternate location for the sbf files?
Click to expand...
Click to collapse
Check here for the name of the file you want to download
http://and-developers.com/sbf:milestone2
And download from here the ROM you want
http://sbf.system-ready.org/umts_milestone2/

I have trouble getting the sbf file too, all the links given are dead and i cant reach it from anywhere else, would anyone be kind enough to share the UK 2.2 sbf file?

http://sbf.droid-developers.org/umts_milestone2/list.php
Sent from my A953 using XDA

RSD Lite freezes HELP!

So basically I flashed Motarola Defy MB525 using RSD Lite because it kept rebooting at start up. I used this SBF to flash it: The Vodafone Britain version:
JRDNEM_U3_3.4.2_179-4.4_VFSBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYOVFGB_P021_A020_M001_HWp3_Service1FF.sbf.gz
At first it worked fine but then after a couple of days it started rebooting again, so I'm trying to reflash it using RSD Lite again using the same SBF but for some reason it gets stuck at Phone[000]: Flashing Code Group 39: Executed 52%.
After about 30 min of waiting it just fails? Please help what can I do? I'm new to this whole thing, p.s the phones never been rooted. I've tried reading the all in one defy beginners but I just don't get it.
Help!

Anyone? Please help.

ChotaDon said:
Anyone? Please help.
Click to expand...
Click to collapse
There are a few options
1) The sbf may have been corrupted, so try re-downloading and see if that works. Alternately try a different country's SBF for same android version. Be careful to NOT flash a Defy+ sbf (which can't be downgraded) on your Defy.
2) If you keep getting the same issue, then try latest/different version of rsdlite.
Best of luck!

[Q] Proplem With Motorola Flipside (Froyo)

I recently got a Flipside abroad from ebay and its an AT&T One, I don't have warranty
It was Working nice with some proplems like the touch freezes and apps stop working frequently but it was OK
my cell don't read arabic so i searched how to add the arabic reading and found one, i had to input framework.jar and another root file, run an cmd, and then copy the produced .zip to sd to flash it after renaming it update.zip
The Flash failed and then i had to use the manual way they mentioned about copying outputed files into framework and lib folders
My Device is rooted and I used adbd insecure to give Android Commander permission to access root from PC
i exchanged files and rebooted as mentioned, and That's The Proplem, The Phone Skips At The MOTO LOGO and that is always followed by an AT&T animation then it starts, but the phone is freezed at the Moto Logo, and i tried removing/placing battery, let it to empty charge then charge it
And to restore factory settings through the Recovery mode but the same problem occurs
PLEASE HELP QUICKLY! as i Cannot Use my phone, Its Android 2.2.2 Froyo

yosry93 said:
I recently got a Flipside abroad from ebay and its an AT&T One, I don't have warranty
It was Working nice with some proplems like the touch freezes and apps stop working frequently but it was OK
my cell don't read arabic so i searched how to add the arabic reading and found one, i had to input framework.jar and another root file, run an cmd, and then copy the produced .zip to sd to flash it after renaming it update.zip
The Flash failed and then i had to use the manual way they mentioned about copying outputed files into framework and lib folders
My Device is rooted and I used adbd insecure to give Android Commander permission to access root from PC
i exchanged files and rebooted as mentioned, and That's The Proplem, The Phone Skips At The MOTO LOGO and that is always followed by an AT&T animation then it starts, but the phone is freezed at the Moto Logo, and i tried removing/placing battery, let it to empty charge then charge it
And to restore factory settings through the Recovery mode but the same problem occurs
PLEASE HELP QUICKLY! as i Cannot Use my phone, Its Android 2.2.2 Froyo
Click to expand...
Click to collapse
Reflash stock sbf with rsd is my only suggestion. Here's the stock sbf
http://db.tt/H2RuCD8h

What?
pre4speed said:
Reflash stock sbf with rsd is my only suggestion. Here's the stock sbf
Click to expand...
Click to collapse
Sorry it may look like i'm a noob, but what is "Stock Sbf with rsd" ??

I done it with another sbf and success but now i'm stuch in that stupid bootloader , can you tell me how to get into the stock recovery from my flipside to wipe/data? as i cannot get of that bootloader

yosry93 said:
I done it with another sbf and success but now i'm stuch in that stupid bootloader , can you tell me how to get into the stock recovery from my flipside to wipe/data? as i cannot get of that bootloader
Click to expand...
Click to collapse
after flashing sbf file, no need to wipe data, if you stuck at some where, reflash the sbf file.

phapsubongtoi said:
after flashing sbf file, no need to wipe data, if you stuck at some where, reflash the sbf file.
Click to expand...
Click to collapse
I reflashed it 3 times , Still stucked on that Bootloader !!

yosry93 said:
I reflashed it 3 times , Still stucked on that Bootloader !!
Click to expand...
Click to collapse
Prolly need the bootloader for froyo as well. Sorry shoulda gave you that too.
Flash bootloader first then the sbf. All done via rsd
Froyo bootloader http://db.tt/FuXac7kG

Seems to be my falt
pre4speed said:
Prolly need the bootloader for froyo as well. Sorry shoulda gave you that too.
Flash bootloader first then the sbf. All done via rsd
Froyo bootloader
Click to expand...
Click to collapse
Ok i flashed it . and flashed the sbf i'm using agian
SAGE_U3_10.23.20_SIGNATT_USASAGE02B25ND0ATTNA02E.0R_PDS001_SAGEATT_P033_HWp4_1FF.sbf
but the same problem, should i use the SBF u told me about or any other??
The SBF i used is also for Flipside, the rsd says successful, and PASS is the result but still stacked in that Bootloader whatever i rebooted using power button or replaced the battery, known that i cannot open Recovery (X+Power Button) to wipe data

Thank You
Thank You very much body, i used the SBF you gave me and it worked well, my phine is now working again
Thank Youuu

yosry93 said:
Thank You very much body, i used the SBF you gave me and it worked well, my phine is now working again
Thank Youuu
Click to expand...
Click to collapse
You are quite welcome. Been so long since I've used or looked at my flopside (no typo lol) that I had forgotten froyo needed the updated bootloader first. Glad its working again.