Is it worth it to install JVK just for the bootloader update? How is it any different from JV1 bootloader? Can I install it from any CWM package? Currently on MIUI ROM..
C'mon guys... some input on this?? Bump.
JVK bootloader update is same as the JV1 one. If you already have that, you don't need to update the bootloader
with the new GB bootloader what changes? i'm hesitant to flash because i don't understand what a new bootloader means (i know that flashing it is dangerous but i've never had any usb issues when flashing a rom).
can i still go back to 2.2.1 if i update the bootloader? anything else to know?
Rawat said:
JVK bootloader update is same as the JV1 one. If you already have that, you don't need to update the bootloader
Click to expand...
Click to collapse
JV1 -> 2.3.2
JVK -> 2.3.3
So are you sure about that? I had flashed JV1 previously... so the JVK brings no update?
msolus said:
can i still go back to 2.2.1 if i update the bootloader?
Click to expand...
Click to collapse
Yes, you can!
Prasad007 said:
JV1 -> 2.3.2
JVK -> 2.3.3
So are you sure about that? I had flashed JV1 previously... so the JVK brings no update?
Click to expand...
Click to collapse
Yes I'm sure.
msolus said:
with the new GB bootloader what changes? i'm hesitant to flash because i don't understand what a new bootloader means (i know that flashing it is dangerous but i've never had any usb issues when flashing a rom).
can i still go back to 2.2.1 if i update the bootloader? anything else to know?
Click to expand...
Click to collapse
The new bootloader stops the screen corruption (rainbow screen) you'd get on booting a GB ROM without the new bootloaders
Alright, thanks!
wait what?
jv1 and jvk contains same bootloader files?
what about the boot animation. why it is so choppy
(i flashed the no_bootloader_version)
and sorry for a bit offtop
Jvk sbl.is different to jv1, although the boot.bin is the same
Sent from my GT-I9000 using XDA Premium App
Mothatt said:
Jvk sbl.is different to jv1, although the boot.bin is the same
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
So what does that mean? Is the startup faster?
yeh im getting corrupted booting aswell from flashing without the new bootloader. any way to correct this? or get back to 2.2.1... thanks.
Related
yesterday I have successfully upgraded my firmware of Galaxy 3 to Froyo 2.2
so congrats every one and go and update your phone to foryo
Best Regards,
Qusai
There already is a thread for the official update.
Wich country?
Subscribe to my official update thread
I prefer to have a custom rom, I dont´know why reviewers talk so good about samsung fw.
if i've flashed my i5800 to JPB can I still update to the official 2.2?
eKulzz said:
if i've flashed my i5800 to JPB can I still update to the official 2.2?
Click to expand...
Click to collapse
WHY JPB???????????
pator5 said:
WHY JPB???????????
Click to expand...
Click to collapse
what;s wrong with it? lol I'll just flash to JPM tonight
I cant find any update for Galaxy 3(5800). Is this available in India or UK??
Ya heard so!!! now am on Kyrillos 3 its nice!
yep, it's Ultra nice! i flashed it yesterday night, migrating from eclair on a i5800L
So is JPM the official update?
srnoth said:
So is JPM the official update?
Click to expand...
Click to collapse
Yes it is, in Germany Samsung provides the JPM over Kies
do i have to go back to the JG6 (stock eclair) in order to get an update for 2.2 from kies?
im currently using BVJP1
krishna_bhargav said:
do i have to go back to the JG6 (stock eclair) in order to get an update for 2.2 from kies?
im currently using BVJP1
Click to expand...
Click to collapse
Yeah you have to go back to JG6 to update via kies...but as of now no update in india...
Sent from my GT-I5800 using XDA App
ronhoover88 said:
Yeah you have to go back to JG6 to update via kies...but as of now no update in india...
Click to expand...
Click to collapse
in that case, i guess its not worth waiting for an update through kies.. could someone tell me which is the best custom rom available now?
krishna_bhargav said:
in that case, i guess its not worth waiting for an update through kies.. could someone tell me which is the best custom rom available now?
Click to expand...
Click to collapse
Kyrillos for sure.
I use lestatious and its the easiest way of updating with his rom...go through the threads of each custom rom and see which suits you..for me lestatious is good
Sent from my GT-I5800 using XDA App
How to root Froyo?
SuperOneClick or One Click Root/UnRoot I9000?
THX
nesta_13 said:
How to root Froyo?
SuperOneClick or One Click Root/UnRoot I9000?
THX
Click to expand...
Click to collapse
SuperOneClick v1.7
kyrillos13 said:
SuperOneClick v1.7
Click to expand...
Click to collapse
I rooted my phone now, thank you very much...
Hello dose anyone no how to put your phone back to 2.1 or 2.2 from 2.3.3
Sent from my GT-I9000 using XDA Premium App
loujack said:
Hello dose anyone no how to put your phone back to 2.1 or 2.2 from 2.3.3
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Follow my MIUI Easy Install Guide and Stop at Step 2, this will revert your phone back to Froyo 2.2.1
Regards,
I have this problem too...
I want back to Froyo for now, wich rom has inside the froyo bootloader ?
I've tryed the jpx but have infinite bootloop
I think that the problem was that inside haven't the bootloader and with the 2.3.3 version it's incompatible the 2.2.1 :-\
Please give me info about a rom wich include all and flash completely and working a froyo stock rom
m4ssnet said:
I have this problem too...
I want back to Froyo for now, wich rom has inside the froyo bootloader ?
I've tryed the jpx but have infinite bootloop
I think that the problem was that inside haven't the bootloader and with the 2.3.3 version it's incompatible the 2.2.1 :-\
Please give me info about a rom wich include all and flash completely and working a froyo stock rom
Click to expand...
Click to collapse
I think your main problem is that you have to flash a rom with 3 files and with PIT-file with re-partition checked. Did you do that?
For bootloader JS8 originally have a bootloader in it.
Cheers,
/qsec
qsec said:
I think your main problem is that you have to flash a rom with 3 files and with PIT-file with re-partition checked. Did you do that?
For bootloader JS8 originally have a bootloader in it.
Cheers,
/qsec
Click to expand...
Click to collapse
Yes I've do that.
Repartition on (pit 512) with the other 3 files.
but have contious bootloop.
Tnks for JS8, I will try it so !
m4ssnet said:
Yes I've do that.
Repartition on (pit 512) with the other 3 files.
but have contious bootloop.
Tnks for JS8, I will try it so !
Click to expand...
Click to collapse
I think im wrong, JS8 has no bootlaoder
JS5 should have it.
/qsec
qsec said:
I think im wrong, JS8 has no bootlaoder
JS5 should have it.
/qsec
Click to expand...
Click to collapse
you can use XXJPU from samfirmware, it has the right bootloaders in it....
richard2311 said:
you can use XXJPU from samfirmware, it has the right bootloaders in it....
Click to expand...
Click to collapse
or use JM2 (2.1), it also has bootloaders
Same problem
I tried all available ROM's
with 2.2.1 to2.3.3
with wipe, hard reset
nothing help
If you had 2.3.3 running and you can get to download mode, do not touch the bootloader or reparation. Just install 2.1 zimage and factoryfs with heimdall. If that gets you booted, go on and do modem.bin and csc.
It is very risky flashing boot loaders. Once you can get to download mode, do not repartition or change boot.bin or sbl.bin. All boot.bin and sbl.bin do is get you to download mode or load zimage.
The boot loop is caused by a zimage/factoryfs mismatch.
I use heimdall because it lets you flash individual files.
Darkstriker has the Dutch 2.2.1 XEN with bootloaders on his file mirror. I reverted back from 2.3.3 to 2.2.1 because I'd rather wait for the official update as there is in fact not much difference between the two of it if you just want the stock ROM.
You can find the link to his mirror at the end of everyone of his post in the thread: " [HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!]".
Search the original firmware from January 2011 and flash it with Odin. It'll revert with bootlaoders and then you can re-flash the froyo version you want.
ezrom has bootloaders and is 2.2.1
Use the JPU rom: has the bootloaders.
However, to know if a rom has a bootloader, you should find low in the file name of the PDA.
"I9000XXJPU-REV03-PDA-low-CL747761.tar"
After flashing JPU, you can update the phone to your favourite rom (JS8, for example)
olivercervera said:
Use the JPU rom: has the bootloaders.
However, to know if a rom has a bootloader, you should find low in the file name of the PDA.
"I9000XXJPU-REV03-PDA-low-CL747761.tar"
After flashing JPU, you can update the phone to your favourite rom (JS8, for example)
Click to expand...
Click to collapse
Do you need to tick update bootloaders in odin
Thanks
Use Darky's Resurrection ROM - with this ROM you can easily revert to 2.2.1.
I want to downgrade my sgs from Gingerbread to Eclair, to have a fresh and new start.
I downloaded from samfirmware a eclair firmware. It includes:
- CODE_I9000XWJM1 (inside the file, there are a sbl.bin and a boot.bin file, does that mean that I have a bootloader for eclair?)
- CSC_I9000OXXJG7
- MODEM_I9000XXJG6
- s1_odin_20100512.pit
Are these files good?
Should I tick "update bootloaders" in odin?
I'm scared to do this because I don't want to brick my phone.
enel_ said:
I want to downgrade my sgs from Gingerbread to Eclair, to have a fresh and new start.
I downloaded from samfirmware a eclair firmware. It includes:
- CODE_I9000XWJM1 (inside the file, there are a sbl.bin and a boot.bin file, does that mean that I have a bootloader for eclair?)
- CSC_I9000OXXJG7
- MODEM_I9000XXJG6
- s1_odin_20100512.pit
Are these files good?
Should I tick "update bootloaders" in odin?
I'm scared to do this because I don't want to brick my phone.
Click to expand...
Click to collapse
this is a firmware, that disables 3 button combo! stay away from it! and it is ages old. you should use jpu or js8 with bootloaders if you want to have a fresh start.
Avoid Eclair ROM, some have fu**ed SPL which disable the 3 touchs combo for Recovery and Download.
hey guys, I tried both JVK and JVB stock roms and decided to revert to 2.2.1 JS8, I had no problems with flashing it, but i dont know if i`m with JVB bootloaders or whatever u guys talking about.. So my question is how to check if I`m with/ without JVB bootloaders.
P.S I have recovery/ download 3 button mode active as well
And if it`s not a problem, can someone explain to me what is boot loop and if I`m running on JVB bootloaders on 2.2.1 what problems can this cause to me?
shvedski said:
hey guys, I tried both JVK and JVB stock roms and decided to revert to 2.2.1 JS8, I had no problems with flashing it, but i dont know if i`m with JVB bootloaders or whatever u guys talking about.. So my question is how to check if I`m with/ without JVB bootloaders.
P.S I have recovery/ download 3 button mode active as well
And if it`s not a problem, can someone explain to me what is boot loop and if I`m running on JVB bootloaders on 2.2.1 what problems can this cause to me?
Click to expand...
Click to collapse
if you flashed jvb over kies, you will have the bootloaders. if you flashed the jvk leak with the sbl one in the end of the filename, you also have the bootloaders. the best way to check is, is to open the firmware's -which you flashed to get gingerbread- pda or code file with winrar and look for sbl.bin and boot.bin.
i am running on js8 stock with speedmod with jvb bootloaders as well.
it will neither give you something, nor take anything from you. they are completely backwards-compatible. if you can enter download mode, which you can, everything is fine.
a bootloop is a situation, during this the device will not boot, it will keep repeating the boot animation or will hang on galaxy s logo.
somewhy i can't change the baseband... mayable it's because im running freex10 2.2? i always get ''unknown baseband'' and when i do a factory rest nothing happens...
the rom probably doesn't support the baseband you are flashing.....
so would the original se's rom's support 2.0.49 or 2.0.52?
a2ha said:
so would the original se's rom's support 2.0.49 or 2.0.52?
Click to expand...
Click to collapse
yeah it should for sure....
You could flash the baseband patch to fix the problem as well in case you want to use a different baseband with a 2.2 rom then recommended
but i am now using the original 2.1 2.1.A.0.435 and after i flash .49 it still says Unknown...
a2ha said:
but i am now using the original 2.1 2.1.A.0.435 and after i flash .49 it still says Unknown...
Click to expand...
Click to collapse
You've to use .54 .55 or .58 on that ROM.
PlayGunsta said:
You've to use .54 .55 or .58 on that ROM.
Click to expand...
Click to collapse
hmmm.. is there any way to flash .49 or .52 then? i need the Miui's rom
a2ha said:
hmmm.. is there any way to flash .49 or .52 then? i need the Miui's rom
Click to expand...
Click to collapse
you can use .55 or .58 on froyo miui, just flash the baseband patch!!
or look for rendeiro's baseband collection thread and flash .49 or .52 with flashtool
Try cobs miui you can use .49/.52, or his has the patch included in the downloaded file if you want to use .54 , .55 or .58. Killer rom too, no bugs and fast as hell
fiscidtox said:
you can use .55 or .58 on froyo miui, just flash the baseband patch!!
or look for rendeiro's baseband collection thread and flash .49 or .52 with flashtool
Try cobs miui you can use .49/.52, or his has the patch included in the downloaded file if you want to use .54 , .55 or .58. Killer rom too, no bugs and fast as hell
Click to expand...
Click to collapse
do i install the baseband patch thru xrecovery?
a2ha said:
do i install the baseband patch thru xrecovery?
Click to expand...
Click to collapse
Yes install the rom then flash the patch!
That's what I'm using now
Ok, thanks alot
If you need any help just email me
a2ha said:
Ok, thanks alot
Click to expand...
Click to collapse
And before installing the ROM don't forget to do this in xRecovery:
Factory reset
Wipe cache
Wipe dalvik cache
Wipe battery stats
Help with 3G in my x10i
Hello, I want to flash my xperia. I have an x10i with the original 2.1 2.1.A.0.435 with tmobile.. but Im using the hanset in Colombia with comcel, so 3G doesnt work.
I wonder if by flashing my hanset could I get 3G? what do I have to do?.
Also I would like a generic flash so when the gingerbread update arrives I could use SEUS for the update. Is it possible?. If I put a new rom in my hanset , is it possible to go back to the original handset?
Juanpix said:
Hello, I want to flash my xperia. I have an x10i with the original 2.1 2.1.A.0.435 with tmobile.. but Im using the hanset in Colombia with comcel, so 3G doesnt work.
I wonder if by flashing my hanset could I get 3G? what do I have to do?.
Also I would like a generic flash so when the gingerbread update arrives I could use SEUS for the update. Is it possible?. If I put a new rom in my hanset , is it possible to go back to the original handset?
Click to expand...
Click to collapse
No, 3G will not work because the phone does not have the necessary hardware.
Hi,
i Currently have Andriod 2.3.3 on My Phone with CF-Root on with Also Installed ClockWorkMod.
I Plan on Rolling back to 2.2.1 to test something
If I Spoofed the Device using spoofw and Choosed a Different device Code and re-flashed with Kies.
Would This Work without any issues?
Spitfire22 said:
Hi,
i Currently have Andriod 2.3.3 on My Phone with CF-Root on with Also Installed ClockWorkMod.
I Plan on Rolling back to 2.2.1 to test something
If I Spoofed the Device using spoofw and Choosed a Different device Code and re-flashed with Kies.
Would This Work without any issues?
Click to expand...
Click to collapse
You can use Odin and flash a stock firmware for your region from here: http://forum.xda-developers.com/showthread.php?t=1102881
[Ramad] said:
You can use Odin and flash a stock firmware for your region from here: http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
Thanks Ramad,
So i Can just Flash using Odin and i don't need to remove the CF-Root Super USer App And CWM?
Looking at that Thread you have Linked me to there appears to be Several Links for Europe , Does it Matter Which one I Download(aslong its a Europe one) - Im' In the UK
Spitfire22 said:
Thanks Ramad,
So i Can just Flash using Odin and i don't need to remove the CF-Root Super USer App And CWM?
Looking at that Thread you have Linked me to there appears to be Several Links for Europe , Does it Matter Which one I Download? - Im' In the UK
Click to expand...
Click to collapse
If you want official Froyo 2.2.1 for UK then flash XXJPY.
Flash with no pit and no re-partition after disabling any lagfix if enabled...and you will be fine.
[Ramad] said:
If you want official Froyo 2.2.1 for UK then flash XXJPY.
Flash with no pit and no re-partition after disabling any lagfix if enabled...and you will be fine.
Click to expand...
Click to collapse
Thanks Mate.
So According to your Link 2.3.3 hasn't been released in the UK yet??
Spitfire22 said:
Thanks Mate.
So According to your Link 2.3.3 hasn't been released in the UK yet??
Click to expand...
Click to collapse
Good luck
XXJVO is the official 2.3.3 for UK, it's there too.
You needed a Foryo for your phone, I suggested the Froyo firmware according to your need.
Remember to use a firmware with a boot image prior gingerbread. I don't know exactly which one to use though. Maybe someone else can answer.
Sent from my GT-I9000 using XDA Premium App
LuffarJoh said:
Remember to use a firmware with a boot image prior gingerbread. I don't know exactly which one to use though. Maybe someone else can answer.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Can anyone Shade any Light on this ?
I want to maintain the unlocked Bootloader and CWM recovery.
what is Gingerblue?
holtenc said:
what is Gingerblue?
Click to expand...
Click to collapse
I actually meant gingerblur
IF i flash back the 1.8.3 FULL SBF from the superthread from CherryBlur will i brick? URGENT
primeboss said:
IF i flash back the 1.8.3 FULL SBF from the superthread from CherryBlur will i brick? URGENT
Click to expand...
Click to collapse
What CherryBlur version (or rather what's the base version you are on, 2.34, 1.83?)
Just flash 1.26 and OTA upto 1.83.
jimmer411 said:
Just flash 1.26 and OTA upto 1.83.
Click to expand...
Click to collapse
You don't know if he at some point already did update.zip to OTA 2.34. If so, flashing 1.26 SBF would = hard brick.
Anyways, to follow on jimmer's point, I'd suggest flashing the imgs in FruitCake that samcripp posted...