Is it bad to flash wp7 on an hd2 then if you get bored flash Android and yet again flash wp7 after awhile???
bludevil13 said:
Is it bad to flash wp7 on an hd2 then if you get bored flash Android and yet again flash wp7 after awhile???
Click to expand...
Click to collapse
No.. as long as you perform a task29 once in a while then you should be fine.. Just don't loose the Key for WP7 if you have one..
I switch around all the time
I know to do this we can boot into MAGLDR and install the Nand Android Rom. However is that all there is to it or do I have to reformat the sd card first? If so how do we do this? Thanks.
Related
Hi
Me and i know a lot of you out there have got a big problem on our phone, and broken the usb port. So no flashing ROM from USB sync :S.
I'm hoping that Cedesmith's CLK NAND loader + CWM flashed from an .nbh using the sdcard method will be the solution we are looking for.
Hope some of the great devs out there think of a way for us to flash NAND or even WM7.
Just get the port fixed?!
PS. There is no such thing as "WM7".
TheATHEiST said:
Just get the port fixed?!
PS. There is no such thing as "WM7".
Click to expand...
Click to collapse
Couldn't thinked of that by my own... Thanks for the obviusly help. WM7 is Windows Mobile 7 and im prety sure there is such a thing.
Ahmun_Ra said:
Couldn't thinked of that by my own... Thanks for the obviusly help. WM7 is Windows Mobile 7 and im prety sure there is such a thing.
Click to expand...
Click to collapse
./Correction_Needed
Windows Phone 7.
Get your port fixed, or If you can try to flash cwm recovery.
Shatterv2 said:
./Correction_Needed
Windows Phone 7.
Get your port fixed, or If you can try to flash cwm recovery.
Click to expand...
Click to collapse
Correction noted.
Dude once again with fixing the port... If that was an option i would be asking for a .nhg so i could format the phone. I've got MAGLDR installed using the SD card now, and i know about cwm, i want a way to partion the phone from the SD for Android or WP7. If i knew how to do that i would be asking...
Thanks a lot
same here
Hi,
My USB is also broken. This is somehow not covered by warranty. Repairservice wants to charge me for 536€ and Amazon sells the HD2 already for 499€.
I cannot afford a new one nor the repair.
Beeing able to flash everything including HSPL and MAGLDR from SD-Card.
I would be very greatful for that option as the standard software provided from HTC is very disappointing with all the great options for the HD2 out there.
Best Regards,
Joe
Ahmun_Ra said:
Couldn't thinked of that by my own... Thanks for the obviusly help. WM7 is Windows Mobile 7 and im prety sure there is such a thing.
Click to expand...
Click to collapse
Well you're wrong!
There is no "Windows Mobile 7" The OS you are referring to is called "Windows Phone 7" and its a completley new OS and nothing to do with windows mobile, hence it doesnt run any of WM programs.
i have a question in regards to the clockwork mod recovery now on hd2, I have installed magldr1.13 thats fine, i have also flashed the clcokwork recovery as well.
I am totally lost as to how you are supposed to be able to flash rom zips from clockwork instead of nand flashing. I know how to nand flash, and I also know how to use clockwork on regular android o.s systems , but im lost as to what this clockwork recovery works with nand roms and regular zip or z7 roms.
If I flash a regular nand rom like i have, and then get into clockwork and try to install a rom from clockwork it messses up?
Are the cockwork roms for the hd2 specific as in zip format or can you intall a nand rom from clockwork it seems people have merged some nand roms with sd .
Any insight or guide would help.
lojak29 said:
i have a question in regards to the clockwork mod recovery now on hd2, I have installed magldr1.13 thats fine, i have also flashed the clcokwork recovery as well.
I am totally lost as to how you are supposed to be able to flash rom zips from clockwork instead of nand flashing. I know how to nand flash, and I also know how to use clockwork on regular android o.s systems , but im lost as to what this clockwork recovery works with nand roms and regular zip or z7 roms.
If I flash a regular nand rom like i have, and then get into clockwork and try to install a rom from clockwork it messses up?
Are the cockwork roms for the hd2 specific as in zip format or can you intall a nand rom from clockwork it seems people have merged some nand roms with sd .
Any insight or guide would help.
Click to expand...
Click to collapse
Yessss. Please make a way to flash new partitions with sdcard. I have a USB port with a broken contact between the mainboard and the USB port that can't be fixed.
ok so i want to know if i were to flash android after using wp7, would all the data still be there when i flash back to wp7?
because from what i know wp7 saves data to the sd card. would i have to unlock again and all that other mumbo jumbo.
chrisizzle492 said:
ok so i want to know if i were to flash android after using wp7, would all the data still be there when i flash back to wp7?
because from what i know wp7 saves data to the sd card. would i have to unlock again and all that other mumbo jumbo.
Click to expand...
Click to collapse
Just did this lastnight and nothing happened to WP7. Infact Android failed to flash to nand so I'd say no.
Might as well wait until MAGLDR 1.13 dual boot may be included
chrisizzle492 said:
ok so i want to know if i were to flash android after using wp7, would all the data still be there when i flash back to wp7?
because from what i know wp7 saves data to the sd card. would i have to unlock again and all that other mumbo jumbo.
Click to expand...
Click to collapse
You will need to unlock again etc because the unlock affects data on nand not your SD card.
bigtall10 said:
Just did this lastnight and nothing happened to WP7. Infact Android failed to flash to nand so I'd say no.
Click to expand...
Click to collapse
It failed because you did something wrong. I have flashed WP7 and Android to NAND multiple times without problem.
staypaidtre said:
Might as well wait until MAGLDR 1.13 dual boot may be included
Click to expand...
Click to collapse
You can dual boot WP7 and Android already. You simply have to partition your card correctly.
Check teh SD forum stickies for the partitioning guide, its really easy.
I'm currently booting WP7 from NAND and Android from SD.
Hey guys I tried posting this on the WP7 HD2 section but I havent got a responce. I was booting WP7 on NAND and now I want to get rid of it and boot android on NAND, so how do I get rid of WP7 and get android instead?
Wrong section dude... No wonder people ignore you.
Also, it has been discussed a lot of times in q and a section.
Sent from my HD2 Droid HD using XDA App
Carliz89 said:
Hey guys I tried posting this on the WP7 HD2 section but I havent got a responce. I was booting WP7 on NAND and now I want to get rid of it and boot android on NAND, so how do I get rid of WP7 and get android instead?
Click to expand...
Click to collapse
enter magldr by holding down the power button then select usb flasher and flash ur choice of android.
1.what he said.
2. Reflash MAGLDR
Edit : above poster beat me too it lol
Sent from my HTC HD2 using XDA App
Carliz89 said:
Hey guys I tried posting this on the WP7 HD2 section but I havent got a responce. I was booting WP7 on NAND and now I want to get rid of it and boot android on NAND, so how do I get rid of WP7 and get android instead?
Click to expand...
Click to collapse
The same way you flashed WP7. That is, of course, the Android ROM you want is USB flashable. If it is a Zip, you need to follow the instruction for flashing from an SD card. Android ROMs that flash from a card (CWM) will have instructions. And there are a few ROM that flash both ways; from USB or card.
here you go! think backwards... how did you install WMP7??? and how did you first install NANDroid??? then theres your answers!... good luck
All you have to do is Task29 from bootloader then re-install MAGLDR then follow the instructions from the Android Build you choose
Hi,
I hope this question will not touch your nerves...
I already can flash Winmo or Android (SD or NAND). I Know how MGLDR and CWM are working. Now I wanted to install WinMo 6.5 AND android on SD, and keep the MAGLDR as bootloader. But, if I flash a WINMO rom, then I loose MAGLDR, and if I install MAGLDR after the winmo, i get Win no booting anymore.
How can I do? Thanks!
i think it's not possible.
serjiolin said:
Hi,
I hope this question will not touch your nerves...
I already can flash Winmo or Android (SD or NAND). I Know how MGLDR and CWM are working. Now I wanted to install WinMo 6.5 AND android on SD, and keep the MAGLDR as bootloader. But, if I flash a WINMO rom, then I loose MAGLDR, and if I install MAGLDR after the winmo, i get Win no booting anymore.
How can I do? Thanks!
Click to expand...
Click to collapse
Not possible, MAGLDR completely replaces WinMo and vice versa. Although, you could flash WP7 from MAGLDR and have Android SD if you wanted Or, if you wanted to keep WM6.5 surely the logical thing to do would be to run WM6.5 and an SD Android build? MAGLDR serves no functionality with an SD build of Android
Thanks both!
Yeah i realized it's not possible. I would like to have he best way to boot android (mounted on SD) without struggle woth windows each time. I want to keep the 6.5. At the moment i'm trying rundroid out, any better suggestion?
serjiolin said:
Thanks both!
Yeah i realized it's not possible. I would like to have he best way to boot android (mounted on SD) without struggle woth windows each time. I want to keep the 6.5. At the moment i'm trying rundroid out, any better suggestion?
Click to expand...
Click to collapse
Nah RunDroid was the best for me when I used SD Android
As for the skipping WinMo part, if you never want to use it again why not flash NAND Android?
i agree, i don't understand why people ever want to run WM on their HTC HD2, android is way better in my opinion.
MarioWaza said:
i agree, i don't understand why people ever want to run WM on their HTC HD2, android is way better in my opinion.
Click to expand...
Click to collapse
I agree, I was die-hard WinMo when Android first started working on SD and I only played with it as a hobby. Now I haven't used WinMo since earlier this year and will never go back. Team Blue Droid on Nand and ICS on SD is my way to go now.
I have [DFT] MAGLDR 1.13 installed on my HD2 and the AD Hardreset function does not work.
I tried using the hardware key to hard reset the phone, it did not work as well.
I am trying to get rid of this install so that I can install other custom roms onto the SD card instead.
Can someone please tell me how I can get rid of my [DFT]MAGLDR 1.13 installed on the phone?
Thanks so much.
doing a hard reset will not set you back to windows and original install you need to flash back to stock windows for that
crus said:
I have [DFT] MAGLDR 1.13 installed on my HD2 and the AD Hardreset function does not work.
I tried using the hardware key to hard reset the phone, it did not work as well.
I am trying to get rid of this install so that I can install other custom roms onto the SD card instead.
Can someone please tell me how I can get rid of my [DFT]MAGLDR 1.13 installed on the phone?
Thanks so much.
Click to expand...
Click to collapse
Do a task29. If u dont know how i can rip off tekst from my tutorial done for instaling rcmix3d rom.
Wdustin1 said:
doing a hard reset will not set you back to windows and original install you need to flash back to stock windows for that
Click to expand...
Click to collapse
I don't need it to flash back to original windows, just want to get rid of the current Android stock on the memory and flash to something else.
Cjovecje! said:
Do a task29. If u dont know how i can rip off tekst from my tutorial done for instaling rcmix3d rom.
Click to expand...
Click to collapse
Will I be able to use task29 and then install other custom Android rom?
Will want to install new custom ROM on the SD card instead of NAND.
Thanks
Then just flash a stock Windows Mobile ROM and go from there with your SD Android.
Get a dual boot application that will ask you every time what you want to boot.
Just curious, why do you want to go back to SD Android?
crus said:
I don't need it to flash back to original windows, just want to get rid of the current Android stock on the memory and flash to something else.
Will I be able to use task29 and then install other custom Android rom?
Will want to install new custom ROM on the SD card instead of NAND.
Thanks
Click to expand...
Click to collapse
Task29 removes everything from nand. So you can flash any other NAND rom. Clk Or magldr.
katalin_2003 said:
Just curious, why do you want to go back to SD Android?
Click to expand...
Click to collapse
Want to try Android on SD to see if I can install more apps on the phone.
Sent from my GT-I9100 using XDA App
crus said:
Want to try Android on SD to see if I can install more apps on the phone.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
You can't run the system from SD and install to the phone. SD android doesn't touch the nand in any way.
samsamuel said:
You can't run the system from SD and install to the phone. SD android doesn't touch the nand in any way.
Click to expand...
Click to collapse
Oh. So I still have to have a stock firmware on the NAND.
If that is the case I will just flash it to a latest NAND Android.
Thanks everyone for the help.
crus said:
Oh. So I still have to have a stock firmware on the NAND..
Click to expand...
Click to collapse
well not quite, you could have android on nand and another android on sd, or wp7 on nand and android on sd.
crus said:
I don't need it to flash back to original windows, just want to get rid of the current Android stock on the memory and flash to something else.
Try to do adrecovery and factory reset, so you can flash another rom, I just did that now switching to another rom =P
Click to expand...
Click to collapse
ian95 said:
crus said:
I don't need it to flash back to original windows, just want to get rid of the current Android stock on the memory and flash to something else.
Try to do adrecovery and factory reset, so you can flash another rom, I just did that now switching to another rom =P
Click to expand...
Click to collapse
It would be really nice for your not to post stupid questions. I told him to go back to winmo to see if everything is working. Flashing from winmo is easier then from this "unknown" state. I think he got all help he needed.Ad recovery and factory reset wont help him much.
Click to expand...
Click to collapse