Database Users

[Q] which best for me

whick HSPL is best for my hd2!?!?! and which radio version!?!?
Can i install hspl without storage card!?!?!?thanks(and sorry for my silly questions....im noob )

Yes
How about details of your phone, ROM, Radio ROM, operator

HTC HD2 LEO
OS: 5.2.21869(21869.5.0.82)
MANILA: 2.5.19211619.0
ROM: 1.48.482.4(71294) ELL
IM NOT SURE IF ITS RADIO: 2.05.51.05_2
do you want these?!

i want to install them without Storage card.... because i havent!!! i ll buy one....!! can i install costum rom without card!?!?!

Since you haven't got the American T-Mobile version of the HD2, then you can play about with custom ROMs (make sure you first flash the radios the chefs select).
The American T-Mobile version is vulnerable to being bricked if the wrong radio or ROM installed.
Prior to doing any of this install the latest version of HSPL. This allows custom ROM and also enables you to be back to 'as shipped' condition if you have to return it under warranty.
Please read the excellent guide for flashing for noobies in the ROM section. Then importantly, read it thoroughly again.

(make sure you first flash the radios the chefs select) what do you mean with this?!
can i install hspl without SD Card yeah?!?!
can i install rom without sd card?!?!?!
ALL VIA WMDC!!!
and if i stop in hspl stage,the phone will work fine?!?!
because i read that if i want to install a costum rom i should have sd carfd....

(make sure you first flash the radios the chefs select) what do you mean with this?!
can i install hspl without SD Card yeah?!?!
can i install rom without sd card?!?!?!
ALL VIA WMDC!!!
and if i stop in hspl stage,the phone will work fine?!?!
because i read that if i want to install a costum rom i should have sd carfd....

yes you can do this without sd card.

konvict550 said:
(make sure you first flash the radios the chefs select) what do you mean with this?!
can i install hspl without SD Card yeah?!?!
can i install rom without sd card?!?!?!
ALL VIA WMDC!!!
and if i stop in hspl stage,the phone will work fine?!?!
because i read that if i want to install a custom rom i should have sd carfd....
Click to expand...
Click to collapse
You don't need a microSD card to flash, as it can be done via the pc (activesync on XP and WMDC on Vista and 7). The SD Card method should only be used if you have serious problems and cannot connect to the pc.
You can just hspl your phone and it will still work the same as it did.
You can then flash either a HTC (unbranded) ROM v1.66 or you can go for one of the custom ROMs.
The HTC ROM includes the main ROM and the Radio ROM. If you use this one, then you can flash a newer Radio ROM after.
If you want to flash a Custom ROM then the people who create them will have tested them with specific Radio ROMs to make sure that they run well. SO if you want to flash a custom ROM, then after hslp-ing the phone you have to flash the Radio ROM they suggest. Once this is done then flash the custom ROM.

i ll install hspl3... but in this step (*You can select between SPL2.08.0000 or 2.08.HSPL) which one?!!?

2.08HSLP. This allows you the option to install custom ROMs (although you don't need to install a custom ROM).
SPL2.08 only allows mobile operator ROMs and HTC ROMs.
I have installed 1.42 HSLP (because HSLP 1 was all that was available at the time) and installed HTC 1.66WWE (World Wide English). The reception wasn't that great so I flashed 2.10.50.08.2.
I would flash a custom ROM, but the standard HTC one works fine for me.

[Q] Serious problems with Magldr and HSPL3

Hi everyone!
Been surfing the web and xda for solutions to this for 5 hours straight and I can't find anything that helps me with my problem. Can't find a thread about it either, so I hope you guys can help me.
So I got my HD2, trying to run Android on it via NAND, but first off I'm not able to use MAGLDR; When the HTC-screen with the progress bar comes up, but just locks up on 0%.
I google it, and look it up here, seems i need to run HardSPL and get a new to get this badboy to work, but when i try running that, i get the error message "Bad spl".
Now where do i go from here? Did i miss something when looking for the info?
If anyone has a solution to my problem, I would be thrilled.
And if you need any info, just post and i'll provide whatever info you need!
Thanks in advance!

I've got the same problem. Already got the original 3.14 WM rom and darkstone froyo superram installed.
Today I wanted to flash to a NAND rom, but had the same problem as you. Could have something to do with HardSPL not flashing the stock 3.03 SPL.
I'm also waiting for help

Hello,
I also ran into the same problems as you guys. It very important that you flash a rom that a HASPL lower then version 3. I notice that 3.14 stock rom comes with version 3.xxx of HASPL what made it impossible to flash to 2.08 HASPL what is also needed for MAGLDR 1.11.
So I flashed a the 1.66 stock rom version from my SD card then there was an older HASPL present on my hd2. So far, so good. Then i flashed to MAGLDR 1.11. But my hd2 won't start up anymore. Just the white HTC screen. The reason was that my radio version wasn't the right one. It has to end on x.50 and not x.51. So I flashed a x.50 version of the radio. Then I flashed MAGLDR and I was on my way again for android nand flash.
Hope this helps ...
Grtz

Check your radio version
I have the same problem like you,
I resolve the problem when I change the radio version to Radio_Leo_2.15.50.14
P.S. When you flash with some old official ROM you also change radio ROM
now everything work

If you have SPL 3.03, you cannot flash HSPL 2.08 directly into it. It will not work.
So if you have a HD2 device with 3.14 HTC HD2 official firmware, you will have SPL 3.03.
You must downgrade your SPL 3.03 to SPL 2.xx or SPL 1.xx before HSPL 2.08 can be installed.
US T-MOBILE HD2 (1024MB ROM)
You need to find 2.10.531.1 or 2.13.531.1 OFFICIAL FIRMWARE from T-MOBILE website.
You cannot use 3.14.531.1, which is the thing that gave the SPL 3.13 in the first place.
You need to extract from the EXE file using 7-ZIP or WinRAR RUU_signed.nbh, and rename RUU_signed.nbh to leoimg.nbh and put it on a FAT32 MicroSD card, then turn off your device, hold volume button, then turn on the device.
PRAY.
HTC HD2 (512MB ROM)
You guys are lucky.
Goto HTC's website, choose the country where your phone is from.
Download 2.xx or 1.xx version of the official ROM
Extract RUU_signed.nbh and rename it to leoimg.nbh, then copy to FAT32 MicroSD Card.
Turn off the device, hold volume button, then turn on the device.
After the SPL is no longer 3.13, use HSPL3_PK and update to HSPL 2.08
Remember to flash your radio to 2.15.50.14.

[Q] How Do You Get SPL 1.42.0000?

I'm currently trying to get Android NAND on my [T-Mobile (US)] HTC HD2. It requires to flash MAGLDR, but you need to install HSPL 2.08 before you can do so. However, you can't install that unless you have SPL 1.42.0000.
Right now, I have SPL-2.10.0000.
I read this post: http://forum.xda-developers.com/showpost.php?p=5923079&postcount=4
It said that you would need to get a 1.48 ROM, but whenever I put my serial number in, it says, "Sorry, this software download is not suitable for your device." Should I do a hard reset and return it to factory settings or something?
What do I need to do to get SPL 1.42.0000 instead?
Other info: I have ROM version 3.14.531.1 and Radio version 2.15.50.14.
Thanks!

if you flash anything that gives your tmous (t mobile us) hd2 spl 1.42.0000, it will be dead. you are reading ooooold information, related to the regular hd2, not teh tmous (you have a 'tmous', or '1024leo' or 't-mo hd2' its important that you keep an eye out for that.)
keep reading., , a starter hint if your aim is android is 'hspl4 - 2.08.hspl'

U need hspl4, do a reach on it
Sent from HTC HD2 with Android

Help

I just got an HD2 T8585 (radio 2.15.50.14), European version.
It comes with Artemis v62, and I want to install a decent sense Android rom.
The thing is, I don't know how.
I don't know if I have Maglrd(?) installed, or not.
Can anyone help me? I don't want to brick the phone!
If you can also recommend me a rom, I'd be thankful.
thanks

I think the maglrd is only for android and wp7 builds (for now)

if you have Artemis installed then you probably only have HSPL installed. Depending on which HSPL you have, it may not be compatible with MAGLDR (which is required for Android/WP7).
There's a thread called 'how to flash everything' -- look for it to get started.

if u have artemix than u have hspl 3.03 or sspl ...to install magldr or clk u must install hspl 2.08 ...download the toolkit ...and choose a rom from nand section ...u will find in the rom thread the instruction for installation

[Q] Can't install HSPL with 2.05 SPL version

I can't install my HD2 T-mobile with HSPL3 or HSPL4 version.
It's running windows mobile 6.5 with radio 2.08. SPL 2.05. I can't find any where.
Any one have any Idea please!!!
I've tried to flash with stock rom 6.5 but I can't. It's stop at 0% while flashing for a long time and I must recovery it.
Thanks so much for your attention.