I installed the MAGLDR113 and after that my HTC HD2
does not boot anymore. It hangs in Circle Logo for hours...
It is not able to boot anymore.
I tryed the Hard REset but it does not solve the problem.
Any Idea??????????
it should work
htc_fagn said:
I installed the MAGLDR113 and after that my HTC HD2
does not boot anymore. It hangs in Circle Logo for hours...
It is not able to boot anymore.
I tryed the Hard REset but it does not solve the problem.
Any Idea??????????
Click to expand...
Click to collapse
reboot your phone, on boot, hold volume down key, then
flash windows mobile 6.5 official or modded one via your windows computer
thihaz said:
reboot your phone, on boot, hold volume down key, then
flash windows mobile 6.5 official or modded one via your windows computer
Click to expand...
Click to collapse
Thanks. It solved my problem.
/F
Related
all i get is the telus boot screen and thats it. is there anyway to flash the rom onto it? or restart it some how?ive tried to take out the battery and restart it that way and still boot screen.
I think you can do a hard reset by holding the "power button", "end key", and pressing the reset "pinhole" at the same time.
foxatphoenixlabs said:
all i get is the telus boot screen and thats it. is there anyway to flash the rom onto it? or restart it some how?ive tried to take out the battery and restart it that way and still boot screen.
Click to expand...
Click to collapse
have you tried getting into bootloader by pressing power/camera/reset?
when did this start happening?
The same thing happened to me today... Im frozen at the htc smart mobility boot up screen and nothing works!
if your phone was older and you tried to flash a GPS rom without installing the GPS radio then you would freeze up a the bootscreen
the remedy for that would be to install the 3.42 radio ROM
raybond25 said:
if your phone was older and you tried to flash a GPS rom without installing the GPS radio then you would freeze up a the bootscreen
the remedy for that would be to install the 3.42 radio ROM
Click to expand...
Click to collapse
I think I have same problem.
Anyone have a link where I could find that & install instructions to make sure I don't screw up more?
This happened to me too. I ended up having to reflash it like everyone said.
My htc hd2 is stuck on the boot up screen,tried pressing the end key and the red reboot button at the same time but still no progress,still stuck.....what now? help please
Hannoe said:
My htc hd2 is stuck on the boot up screen,tried pressing the end key and the red reboot button at the same time but still no progress,still stuck.....what now? help please
Click to expand...
Click to collapse
You are in the wrong section altogether. Go to this part of the site http://forum.xda-developers.com/forumdisplay.php?f=631
@OP,
First things first, did you unlock the device before flashing? Also, are you sure that you have a Vogue and not an Elf/Elfin?
A quick way to get out of your issues would be to try to flash the phone back to stock. Put the device in bootloader mode and flash a stock rom for your device.
When I try to update to WM 6.5 or to Opal_HardSPL_v2_0, or to any other 6.1 updates. I get connection error either 202 or 260, device hangs with wait (4color) circle in the middle.
I tried the following and nothing helps:
Windows 7
XP
Vista
Manual Opal_HardSPL_v2_0.exe file (device hangs)
Updated active sync on xp and wmdc on vista/7
Any thoughts?
I can't enter bootloader screen either, tried by powering down, and then holding volume down key and powering up. It boots straight back to WM.
Hello , so install Hard SPL Manualy in your viva , and next run the updater.
To the best update use Windows XP / Professional
Now I Use Windows 7 to Update Opal
Any Question Contact-me ....
Now i will updated the version 26
I Will Back
Regwards
Nuno Rodrigues
thanks for a reply,
when I try to go into SSPL manually, phone hangs with the same 4color circle and soft reboot required.
Is there a problem with my version of opal, is it a cheaper one with bad processor?
I have tried both XP, Vista and now Windows 7, same issue on all of them.
Thanks
I got same error, too. Error 202: connection is not established though my Opal and laptop was sync properly.
make sure that you are connected via ActiveSync.
but when power is off, press both volume key down and send (green) button at the same time and press power button... that triggers the tri-color bootloader menu... and from there you can update your phone.
Device is off.
I press and hold vol down and green button(left), and then press and release power - device boots right into Windows mobile - no boot loader screen.
When I press and hold vol down and red button(right), and then press and release power - device shows blue screen for few seconds and then boots into Windows mobile - no boot loader screen.
Like I said manual HARDSLP file does not work, as device hangs after running this file.
Wha is going on? Is my device broken somehow?
Deyan
Nuno Rodrigues said:
Hello , so install Hard SPL Manualy in your viva , and next run the updater.
To the best update use Windows XP / Professional
Now I Use Windows 7 to Update Opal
Any Question Contact-me ....
Now i will updated the version 26
I Will Back
Regwards
Nuno Rodrigues
Click to expand...
Click to collapse
Hello. I need help. I have read many things in the forum, but i can not replase window mobile. I tried many times, but the process reaches 1% adn the phone restarts. I use Windows 7. Please help. What exactly should i do. Thanks
sponsora said:
Hello. I need help. I have read many things in the forum, but i can not replase window mobile. I tried many times, but the process reaches 1% adn the phone restarts. I use Windows 7. Please help. What exactly should i do. Thanks
Click to expand...
Click to collapse
Hi sponsora, which rom are you trying?
Is better use Windows XP to the update processs
When I try to update to WM 6.5 or to Opal_HardSPL_v2_0, or to any other 6.1 updates. I get connection error either 202 or 260, device hangs with wait (4color) circle in the middle.
I tried the following and nothing helps:
Windows 7
XP
Vista
Manual Opal_HardSPL_v2_0.exe file (device hangs)
Updated active sync on xp and wmdc on vista/7
Any thoughts?
I can't enter bootloader screen either, tried by powering down, and then holding volume down key and powering up. It boots straight back to WM
u might want to try these...
manueldsi12 said:
When I try to update to WM 6.5 or to Opal_HardSPL_v2_0, or to any other 6.1 updates. I get connection error either 202 or 260, device hangs with wait (4color) circle in the middle.
I tried the following and nothing helps:
Windows 7
XP
Vista
Manual Opal_HardSPL_v2_0.exe file (device hangs)
Updated active sync on xp and wmdc on vista/7
Any thoughts?
I can't enter bootloader screen either, tried by powering down, and then holding volume down key and powering up. It boots straight back to WM
Click to expand...
Click to collapse
by UPDATE you mean FLASH a new ROM????
can you connect your phone via activesync? if yes...then do this
#go to settings>connections>USB to PC and uncheck/disable/unmark 'Enable faster data synchronization' option.
#establish an activesync connection
#copy the Opal-SSPL-Manual.exe to the phone and run it in the phone
#your phone should go to grey mode (i thinks its what you mean by 'hang')
#now in your PC...run Opal_HardSPL_v2_0.exe and follow the onscreen instructions.
#your phone should reboot and enter into bootloader mode now.
i also suggest that you flash ur opal with a new ROM via the memory card...it is safer than activesync. you can do a search in the forum for 'flash via sd card'. I do it that way only now...no worry about disconnection or connection error... if you cannot find the thread...just let me know and i will try to help you out.
hope that this was helpful...
Correct way to enter into bootloader mode
@All having problems:
Its really weird that you are not able to enter in bootloader mode so most probably you are using the correct way to enter into bootloader mode.
Ok here is the correct way, really detailed.
1. Open your phones back cover.
2. Pull out the stylus.
3. And press the red button which is soft reset button. (No need to hold that button just a press)
4. Soon after pressing the red buton press and hold volume down button. (Now the important thing is dont release volume down button until you reach bootloader mode, You will be there in about 3 sec.)
Note: If the above not working then just before 3rd step press the power button and soon after the vibration of phone on smart mobility screen follow the 3rd step.
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
(1) Take out the battery / Unplug the phone
(2) Put the battery back in
(3) Turn it on and keep only Vol Down pressed
You should get a tri-color screen. Connect USB. Once it says USB at bottom, you are good to go with flashing.
hard reset
these solutions don't work. I had the same problem. Anyone has an idea?
any ideas about that? anyone found the solution?
enter boot loader n flash a new rom via sd card?
omnia1994 said:
enter boot loader n flash a new rom via sd card?
Click to expand...
Click to collapse
already done that... same problem... anything else?
reubenbubu said:
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
Click to expand...
Click to collapse
put phone into bootloader requires you to press volume DOWN while power resetting the phone. Make sure the ROM is named LEOIMG.nbh and is on the root of the sd card. Make sure the sd card is 8gb or smaller unless it is a class6.
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
you need to put your phone back into bootloader, volume down while powering on the phone. then after you see the tricolored screen, connect it to the usb.
t45o5 said:
already done that... same problem... anything else?
Click to expand...
Click to collapse
what problem are you having exactly???? you haven't told us any details to help you.
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
firebroker said:
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
Click to expand...
Click to collapse
stuck where, on the splash screen?
do the same thing only this time use the HTC support page for the correct stock ROM.
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
firebroker said:
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
Click to expand...
Click to collapse
That's weird, maybe they didn't make a 3.14 ROM for your region.
Help BRicked ! htc incredible s....
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Just downgrade again, I had same prob. Everything good now.
sent from my inspire 4g using xda app.
kaysen said:
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Click to expand...
Click to collapse
woah, how the hell did you end up in this forum? lol.
can you get ADB going?
Post your problem in this forum so people who know your device better can help.
http://forum.xda-developers.com/forumdisplay.php?f=1026
HD2 TMOUS stuck after performing task29
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
im having the same problem!i installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again but still nothing...
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
When you turn on your phone what happens? What screen dow it take you to? What does it say when trying to run android? .......and for future notice this is the comnplete wrong section for this....and some more info regarding device, hspl, radio would be helpful too.
oh word? ... try this
1..first download the official wm 6.5 rom from tmobile or http://www.htchd2forum.com/general-...SID=799c9ce6abe4e3ddc05368f8432db509#msg22469
2...second remove the SD card and connect the phone to ur computer
3...hold the down volume + power buttom till u see 4 colurs and them run the tmobile official rom... let me know what happens
it doesn't boot up anymore, I will post again when I have it booting again.
All have to do is to download an htc official rom and connect ur Htc hd2 to
computer and flash it
Good luck
Sent from my HTC HD2 using XDA App
phaverkamp said:
it doesn't boot up anymore, I will post again when I have it booting again.
Click to expand...
Click to collapse
connect the phone to ur computer
hold the down volume + power button till u see 4 colors and them run the tmobile official rom... let me know what happens
In the name of the wee man.
Post this in the right bloomin' topic.
The Mods have just spent an age reorganising this whole corner of XDA and what do you do?
Bugger it all up.
Well done.
At least you are consistent, you buggered your phone and the forum. Bravo.
phaverkamp said:
it doesn't boot up anymore, I will post again when I have it booting again.
Click to expand...
Click to collapse
Can you seriously follow anyone's instructions given man? Quit trying to boot the phone. Connect the phone with your PC via the USB cable. Hold down the "volume down" key and the "power" key at the same time. Tell us if you see the tri colored screen.
phaverkamp said:
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
Click to expand...
Click to collapse
Have you checked the battery contacts? They bend very easy, and the symptoms you describe are exactly those of that. If they are bent, VERY, OH SO VERY CAREFULLY straighten them up. If one or more are broken, I hate to tell you this, but you need to buy a new phone.
phaverkamp said:
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
Click to expand...
Click to collapse
I think you have wrongly done the Clock Work Mod which shows the 123Fatal Hit error and ur hd2 remains stuck there. Your HD2 is not crashed at all just charge it with an external charger then go to bootloader by pressing n holding Volume Down key and Power button until you the triple coloured screen, then connect your data cable to HD2 and flash it with a stock windows mobile rom so it will restore ur hd2 and after that u can install nand rom on it by following each and every step mentioned in tutorials here. Whenever I select boot AD SD after flashing partition layout I always get 123Fatal error now I don't understand what the problem is....If someone has a solution for this problem please reply in this thread as I don't want flashing through DFT method.
hi every one
i installed android on my htc hd mini then after a month i tired
when i want to turn it back to win phone
i download a win mobile rom
and get in three color mode
but i only get errors (the android was working with nand)
iget in recovery and unistall the android then tryed again but nothing
i do factory reset . i suck . now i dont have recovery and any system to boot
when i turn it on it freez in 5 lines green text
plz HELP
have you tried with a sspl or hspl.
can you give the exact text that appears.
does it goes in recovery mode now.
a
addy89 said:
have you tried with a sspl or hspl.
can you give the exact text that appears.
does it goes in recovery mode now.
Click to expand...
Click to collapse
i only do factory reset but nothing changed
no i cant go to recovery mode
give me 1 day
i will writte the text thet appear