Related
There was a locked thread in development where someone asked if it would work. A lot of people replied (obviously without even knowing what they are talking about) that it wouldn't work.
it DOES work on the myTouch 3G's - I just did it on one.
It works on any android phone - but the current apk implementation flashes the 1.4 cyanogen recovery image so it only works on phones that image will boot (i.e. the HTC Dream, or the Sapphire... etc)
It's way easier to apply that than it is to apply the nbh downgrade... etc.
Cool
I posted the question in a wrong area im glad someone with a mytouch tried it i bricked my first mytouch
Worked
This worked for me also I am now on CyanogenMod v3.9.11.2 and it works very well.
TY Cyanogen!
ed
Works...but hesitant
This definitely works on the MT3G just tried it...whew glad it worked Still extremely hesitant on flashing new rom though. Dont know why even though I have a rooted G1. Perhaps I just love this phone too much to f*#$ it up
RyeBrye said:
There was a locked thread in development where someone asked if it would work. A lot of people replied (obviously without even knowing what they are talking about) that it wouldn't work.
it DOES work on the myTouch 3G's - I just did it on one.
It works on any android phone - but the current apk implementation flashes the 1.4 cyanogen recovery image so it only works on phones that image will boot (i.e. the HTC Dream, or the Sapphire... etc)
It's way easier to apply that than it is to apply the nbh downgrade... etc.
Click to expand...
Click to collapse
Now that I think about it...If you just use this to get the recov img the MT3G still has the "perfected" spl. So exactly will this allow you to flash any new ROMs? That is why the "goldcard" was used to trick it and flash to an earlier "non-perfected" spl which would then allow you to flash ROMs updated radio etc etc etc. Shed any light on this?
I know there can be risks when doing any kind of modding/hacking. What is the main risk with rooting the MT3G? Is it mainly an issue with the battery falling out or running out of juice? Or is the rooting process invasive enough (i know it is root = can touch everything) or unstable enough that there is a relatively high probability of an issue running the canned procedure?
I have my phone, love it, my wife would kill me if I wrecked it. I just want to know how likely I am to end up with a brick using this method.
Also a question to understand this procedure, if I run the apk and reboot normally then there is no lasting root, correct? I have to go into the recovery mode and flash over a new rooted rom for root to become permanent? Does this actually change the SPL on the MT3G, does it preserve the ability to flash other roms at any time in the future? I want to know if this is a one time open up your phone for rooting or if after I do this will I always have root.
Sorry for all the questions, but I have been lurking around and haven't found definitive answers to these questions. Thanks!
Dave
Dave, Ive used this method. However if you didnt notice in my previous post...the spl does NOT change. Which is why I questioned the ability to flash any ROMs. The more "complicated" method (http://forum.xda-developers.com/showthread.php?t=547133) requires a "goldcard" with an earlier version of the spl. Which I believe allows flashing to occur.
Yeah, I saw your post after I posted. I think this is great for a simple root I am thinking to have future rooting I will need the goldcard method anyway.
It would seem that this method should be able to modify the SPL since it is able to run as root, maybe not though...
I did mine last night and now doing my wifes MT3G and I was comparing cyanogen's vs stock and its night and day...no loading screen issues with cyan's build and keyboard response got better too...
LOL yeah Ii was thinking about the SPL if we can change it out? I kinda want to call my phone semi-rooted
so anyone flash a new spl/radio using this one click root? success? or no?
bobzoz said:
so anyone flash a new spl/radio using this one click root? success? or no?
Click to expand...
Click to collapse
Still waiting on this one also hehehe haven't seen anyone do it yet!
im debating on getting a mytouch if i can get full root in just a few clicks hmmmm definatley a positive haha. hows the mytouch work in recovery terminal? since theres no hardware keyboard?
bobzoz said:
im debating on getting a mytouch if i can get full root in just a few clicks hmmmm definatley a positive haha. hows the mytouch work in recovery terminal? since theres no hardware keyboard?
Click to expand...
Click to collapse
just use the trackball to select what you want...cant use console though (ALT-X)
Works
bobzoz said:
so anyone flash a new spl/radio using this one click root? success? or no?
Click to expand...
Click to collapse
Just did it...1.33.2005/ also S-off. this is definitely legit and makes things a hell of a lot more easier than all those damn adb commands. Dont get me wrong at all I do appreciate all the work that was done by Haykuro and the other boys because without them Im sure this wouldnt be possible. Anywho...it works.
Okay. As newb as one can get with phone mods, etc. But it actually works. I dont know what the exact benefits of it are but I am running... Mod version CyanogenMod-3.9.11.2 per about phone. All my downloads are gone but it worked. I dont know what the difference/any limitations is for down the road, in comparison to the gold card method (I hope none), with this type of root but hey it actually worked and I would have kick my own a$$ if I bricked my phone. Thanks to folks who found this way and are their any "rooted" differences now that I am on cfw using this method for say updating to cyanogens 4.0 eventual release?
Alright, I took the plunge and it worked flawlessly!
I use the 1 click install via the market app called Recovery Flasher. I installed CyanogenMod 4.0.1 Stable. Zoom zoom zoom...
I thought I may have had an issue when I rebooted after flashing since it sat at the MyTouch 3G splash for a ton longer than normal. I had read it was normal for the first boot to take longer so I didn't freak out and pull the battery. I just let it come up and now I couldn't be happier.
If I remember reading correctly CyanogenMod has the fix for the root vulnerability used in this hack to root plugged. So, now that I have a rooted ROM and recovery 1.4 will I ever need to worry about having the dreaded "Perfect SPL?"
so easy a caveman could do it! a thousand times, thank you.
so its confirmed you can FLASH a different SPL with no problem ? cuz if so im gettin a mytouch ! lol
go for it
bobzoz said:
so its confirmed you can FLASH a different SPL with no problem ? cuz if so im gettin a mytouch ! lol
Click to expand...
Click to collapse
go to town boss...now i need to get out of the stupid hero boot loop.
Thanks. I also took a chance since I got my Touch for free by Timo mistake. Couldn't resist. Aside a few apk not able to install everything works fine. Noob question, can I now format sd card?
Oh, thanks for Quick Office.
I have been searching forums since morning but I haven't been able to figure out how to update to 2.1 and still have root access. There is no OTA available on the phone.
Should I download the RUU exe from sprint's website and update to 2.1? I hear that 2.1 root is not possible after that.
Can anyone guide me in the right direction please?
thanks..
If you want to root now, DON'T update to 2.1. Get the fresh kitchen and root with that.
HeroMeng, thanks for the reply. could you tell me where do I get kitchen from?
and I think I need to mention it is a CDMA HTC Hero on Sprint
phobia said:
HeroMeng, thanks for the reply. could you tell me where do I get kitchen from?
Click to expand...
Click to collapse
You can download the kitchen right here. It only works on Windows, so keep that in mind. Once you download the kitchen, tap the Rooter tab. Check none of the boxes, and press "root" (or something like that).
phobia said:
and I think I need to mention it is a CDMA HTC Hero on Sprint
Click to expand...
Click to collapse
Yeah, that's fine. So is everyone's in this section
so I cant get 2.1 on this thing yet ? Kitchen will install a custom 1.5 ROM on it. I managed to read through another forum thread and root the phone. So now I have root on 1.5. I understand that the unrevoked.com root for androind 2.1 wont work after the OTA update. I am beginning to get a little confused. Can I update the phone to RUU_Hero_C_Sprint_2.20.651.1_signed_test Firmware, as it has a built in ROOT ACCESS source link: here though I cant seem to find the download link for 2.20.651.1
sorry if the message is getting convoluted...
Easiest way is to Root with 1.5 using a guide in the Android Dev Section. I did it to 5 CDMA Heros with no prob whatsoever.
And by the way, 2.1 RUU has been rooted.. Search for it in the Dev Section.. (Should be right there on the first page...
Once you are rooted, if you want Something thats the official one, but much better, I recommend DamageControl 2.09 or Fresh 2.1
I have root on 1.5 now, I can install Fresh 2.1 using the instructions here ?
phobia said:
I have root on 1.5 now, I can install Fresh 2.1 using the instructions here ?
Click to expand...
Click to collapse
Yes. Yes you can.
done deal, running 2.1-fresh. Also updated the baseband to 2.42.01.04.27... would I have to root again or is it already rooted? Set CPU seems to just give me a black screen and the instructions on the set CPU site is not helping...
phobia said:
done deal, running 2.1-fresh. Also updated the baseband to 2.42.01.04.27... would I have to root again or is it already rooted? Set CPU seems to just give me a black screen and the instructions on the set CPU site is not helping...
Click to expand...
Click to collapse
To get SetCPU, just flash GoDmOdE kernel, you can find it here.
ah I figured it out, the reason for the black screen. For some reason if USB Debugging is not enabled, su wont work. Once I enabled USB Debugging, su works just fine...
phobia said:
ah I figured it out, the reason for the black screen. For some reason if USB Debugging is not enabled, su wont work. Once I enabled USB Debugging, su works just fine...
Click to expand...
Click to collapse
Also you need the kernel I posted above or it won't overclock. Over and underclocking needs a special kernel.
a little confused
Heromeng, I'm a little confused. I run a non Sprint hero and some of the forums say fresh kitchen is for Sprint hero's only and others say all hero's. Please dial me in bud. I really want root but don't want to go the Sprint run way. I live in Alaska and my carrier is ACS. Thanks bud.
lohp75 said:
Heromeng, I'm a little confused. I run a non Sprint hero and some of the forums say fresh kitchen is for Sprint hero's only and others say all hero's. Please dial me in bud. I really want root but don't want to go the Sprint run way. I live in Alaska and my carrier is ACS. Thanks bud.
Click to expand...
Click to collapse
You can't root with the fresh kitchen. You need to go through a little more steps then Sprint heroes.
Use this guide to root your hero.
HeroMeng said:
You can't root with the fresh kitchen. You need to go through a little more steps then Sprint heroes.
Use this guide to root your hero.
Click to expand...
Click to collapse
HeroMeng, you rock for gettin right back to me! I've posted questions elsewhereover a month ago and still not heard back. I have read that guide before but didn't want to follow the wrong one and be left with a nice pretty brick. I've read how you help peers and noobs like me and appreciate that. Well I need to fond a Kingston or PNY sd card, I've tried to make a goldcard with 3 different sandisks and they would not take. I know I'm asking big here bit of you could point me in the direction of a good solid reliable ROM that doesn't need to be tweaked to fit my phone and any other advice/guides that would seriously help a brotha out I would greatly appreciate it.
Thanks again bud.
a few questions i have after i get my tab today and root it.
1. will the phone guide here make it so my 3g im using from sprint wont work or whats the deal with that?
2. if it doesnt mess it up should i do the flash tutorial?
3. whats these firmwares im hearing about i know theres no custom roms out yet but ive never messed with phones that have firmwares (i have the evo and had the hero been running CM6 on there for awhile now)?
4.whats the best rooting guys that gives full nand if there is one? ive seen the a few onclick roots?
icm714 said:
a few questions i have after i get my tab today and root it.
1. will the phone guide here make it so my 3g im using from sprint wont work or whats the deal with that?
2. if it doesnt mess it up should i do the flash tutorial?
3. whats these firmwares im hearing about i know theres no custom roms out yet but ive never messed with phones that have firmwares (i have the evo and had the hero been running CM6 on there for awhile now)?
4.whats the best rooting guys that gives full nand if there is one? ive seen the a few onclick roots?
Click to expand...
Click to collapse
1. Phone hack only works on T-Mobile Tab
2. See # 1
3. People are flashing the Euro firmware to get phone working on T-Mobile Tab
4. Download, install and run z4root from the market.
I'm about to root my Evo, the first android phone I have ever attempted to root. I have no idea what I am doing, and woud appreciate some advice. I'm planning to use unrevoked. I"m hoping you can analyze the steps I hope to make and help me through it. I'll even tell you what I want in the end
Tell me if I'm doing this correctly:
1. Install Unrevoked 3
2. Install Unrevoked Infinity
3. Find a custom rom somewhere (I just want a vanilla rom)
4. Be done?
Is this correct? Where do i find a rom btw? I can't wait to get away from sense, I want stock android now!
Moved in EVO 4G General.
try cyanogen
thenimboo said:
I'm about to root my Evo, the first android phone I have ever attempted to root. I have no idea what I am doing, and woud appreciate some advice. I'm planning to use unrevoked. I"m hoping you can analyze the steps I hope to make and help me through it. I'll even tell you what I want in the end
Tell me if I'm doing this correctly:
1. Install Unrevoked 3
2. Install Unrevoked Infinity
3. Find a custom rom somewhere (I just want a vanilla rom)
4. Be done?
Is this correct? Where do i find a rom btw? I can't wait to get away from sense, I want stock android now!
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
Simple:
http://www.thedroiddemos.com/2010/08/27/how-to-root-the-htc-evo-4g-with-froyo-2-2-video-walkthrough/
Just make sure you load a different ROM up afterwards as a stock rooted ROM isn't usually stable and will usually give you random Force Closes on different apps. I recommend Myn's Warm TwoPointTwo or Cyanogenmod 6 personally. Both are faster and very stable. There's a few Vanilla ROMS under the EVO themes section.
help rooting
I am a first time rooter, and I need simple instructions as a "how-to" guide to rooting. Can anyone walk me through step by step? Just explain it like u would to an idiot. Also, what are the benefits of rooting, and is it un-doable? Thanks!
jbstone said:
I am a first time rooter, and I need simple instructions as a "how-to" guide to rooting. Can anyone walk me through step by step? Just explain it like u would to an idiot. Also, what are the benefits of rooting, and is it un-doable? Thanks!
Click to expand...
Click to collapse
What hardware version do u have? If im not mistaken versions 1-3 differ from version 4.
I HAVE 3...
okay so iv had my tab for awhile now and had no need to root it since i used my phone for everything. iv been playing around on android for a bit now and before my milestone i had fun with windows mobile. so please do flame me as dumb and that i didnt look first. i see the bible for our tabs and that the root method doesnt work now. i used heimdall to flash a stock rooted ver of froyo and now it boots but i cant get past the activation screen. yes i have dont the vol up once vol down twice thing. it wont work and just sits on the screen. i can get past it. so now im about to go all the way back to stock and start over. if someone who is more familiar with the fourms then i am can post the links and steps i need to do to get back to a rooted tab that would be great and id be forever thankful. from then on im ok i bought that bootstrapper from the maket to save me time (plus i enjoy giving money to those who work hard for my free entertainment) oh btw should have said it first. i have the vzw i800 tab. thanks so much folks i really just want a working tab again. oh one last thing i have cm9 running ony my phone and love it...whats everyones thoughts on it for the tab?
once again thank you
so i get it this was a tall order and after getting everything working last night im up and runnning with a cwr rooted and on froyo....i wanna jump up to hc or cm9, or some kind of ics but i dont see much and the two i looked at and tried, the dl links are broke...so can anyone point me to the links of working hc or ics for a vzw tab please
really? no one?
For ICS/CM9
First do this...
http://forum.xda-developers.com/showthread.php?t=1317384
Then do this..
http://forum.xda-developers.com/showthread.php?t=1385153
DON'T!
Overcome isn't for cdma ran.
You will brick your device.
Sent from my GT-P1000 using XDA
i guess at this point i just need to make it ext 4. what vzw kernel is best for this? thanks for the replay
You don't need to make it ext4, you need a custom recovery so can flash ICS using CWM. The ICS zip will repartition and reformat anyway, so you have no need of converting to ext4.
You need a kernel with custom recovery (version 3.x or greater).
C.
cheatman said:
You don't need to make it ext4, you need a custom recovery so can flash ICS using CWM. The ICS zip will repartition and reformat anyway, so you have no need of converting to ext4.
You need a kernel with custom recovery (version 3.x or greater).
C.
Click to expand...
Click to collapse
im good then i have cm on it and i think its 3.0 i tried flashing 5.x with rom manager and t started acting funny till i rebooted the recovery. i tried to install cm9 but it told me there was a problem with the package and gave me a code 7 i think. maybe it was a bad dl. ill try and redownload right now and try again. the first time i did everything manually but this time i was lazy and bought the bootstapper. i should be good right? thanks for your help.
i just re dl it and checked the md5. everything was fine. tried to install it and gave me the same thing. error in sd card/cm9 blah blah blah.zip (status 7) this is the step im having problems with
Which cm9 you tried to flash.
Maybe the GSM one?
Better go to rootzwiki.com and look for jt1134's ICS built there.
Sent from my GT-P1000 using XDA
going to that site now. i hope it works. im kind of pissed off. every rom i try the dl link is broken or it doesnt flash. im back to stock re rooted and did the bootstrap. i just wanna get off of froyo at this point.
sorry if I am leading you on a chase.
I am not a CDMA user, that is why I don't really know where you should get your CDMA build.
But I found this
http://forum.xda-developers.com/showpost.php?p=24986629&postcount=756
Go there, and find on 2nd line that says Alroger's Downloads.
That points to Alroger's external site.
He has a P1000CDMA build of the "TE4M version of CM9"
That will be your best bet.
jt1134 is also a TE4AM dev I think, or at least lots of his code in it.
priyana said:
sorry if I am leading you on a chase.
I am not a CDMA user, that is why I don't really know where you should get your CDMA build.
But I found this
http://forum.xda-developers.com/showpost.php?p=24986629&postcount=756
Go there, and find on 2nd line that says Alroger's Downloads.
That points to Alroger's external site.
He has a P1000CDMA build of the "TE4M version of CM9"
That will be your best bet.
jt1134 is also a TE4AM dev I think, or at least lots of his code in it.
Click to expand...
Click to collapse
no your not leading me to anywhere bad. its just a lack of upkeep on a old deivce its just harsh. im on that site you told me about and im finding a lot. im thankful youre helping me with this. do you know why im getting a error code (status 7) any and everytime i try flashing cm9? this is the nly things that stands in my way
from what I understand, error 7 is when the device you are flashing is not supported by the package.
Say earlier you tried to flash a p1000 rom into a cdma device.
I am almost convinced that if you get the right package, namely the one for cdma or "p1c" build, you should be able to flash it.
jt1134 is the most knowledgeable on CDMA CM9 builds.
yeah im on p1c builds and cdma builds....do you think its because im trying to go from froyo right to ics with out gb? should i flash cubbed in heimdall (3.2.x) before going to ics? or does it not matter on this device?
once again im so thankful for your help
which CWM version you have?
Apparently you need to have the latest 5.x.x ?
3.0...damn i didnt even think of that and i sould have thats whats going on with the photon right now. trying now thanks
that worked! thanks for the help