I was just browsing through few apps when the tab froze and I reset the tab by holding down the power button - now it fails to boot - its stuck on the samsung logo that breathes and vibrates for a bit and repeats vibrates after few seconds.
Anyone got any clue?
Cheers
EDIT: managed to get it booted with wiping data and cache :/
Related
my p6800 suddenly reboot itself and now hold in the splash screen, white word "Samsung GALAXY Tab 7.7"
hold on this screen around 15 mins now, tried use cwm restore or flash a new rom, tried wipe cache, factory reset, what should i do?
what happen??
I had the same problem twice and I had to hardreset it... power off , hold power and vol up , then release power, select hardrest from the screen menu.
I just had this problem! Happened to glance at it on the table and it was just rebooting. Working okay after reboot but why would it do that?
Mine reboots itself when something happens to wifi. When my wifi is unstable, so is tab.
Yesterday my friend rebooted his wifi router, stating: rebooting... Now. And indeed at that same time my tab reboots
Verstuurd van mijn GT-P6800 met Tapatalk
hi all,
Just come back from holiday and SM-G928F edge plus (european model) battery was completely flat.
I charged the mobile and booted it up, loaded into Android then sounded like a lots of notification alerts then phone made a loud buzzing noise and crashed/auto-reloaded.
Since then it had gone into a boot loop. Tried holding power and vol down to reboot phone. Initially this function worked then no longer worked. Phone still stuck in boot loop...
Could not get into safe mode (hold power and vol down then release power)
Tried in recover mode (hold power, vol up and home), tried clearing cache took ages about 1 hour, also tried the format option, rebooted system and still boot loop..
Tried going into Odin mode (power, vol down and home) , used ODIN s/w and installed the latest XER version firmware, got success message but still boot loop...
Interestingly when I left it to constant boot loop, eventually it booted up Android now. However once I start using the mobile it intermittently reboots the mobile and then goes back into boot loop again...
When I did manage to get into Android I tried using an app to check the mobile health, strangely I notice it said I only had 1gb ram spare and the rest was used when mobile was factory reseted and I didnt expect so much RAM in use. During stress test mobile crashed and gone into boot loop again...
I am not sure this was affected by an auto update that may had gone wrong.
I don't root, just used stock firmware.
UPDATE:
Left mobile in boot loop until battery went flat, fully charged it and now can get back into Android. But it started to auto update some app and then auto rebooted/crashed and went into boot loop again.
Please help.
Thanks
Is there anyone who can help me please?
Dear Galaxy tab experts!
I have read on several places in the Internet that some people has suffered
in a boot loop. The Internet recommends to do a hard reset via
the recovery mode. OK. Unfortunately, my device fails to enter the recovery mode.
My Samsung Galaxy tab 4 SM-T530 has been working fine for for about 2.5 years
until last weekend. Now it does not boot but stays in a reboot loop. That
means that The boot logo shows up for a while and disappears after
about 10 seconds.
I was searching the Internet and I wanted to try out the recovery mode
but I am not able to reach it. When I press Power + Volume Up + Home buttons,
the label "recovery booting ..." appears in the upper left corner of the
display for a while and thereafter, the boot loop continues.
Fortunately, I am able to shutdown my device by pressing
the Power + Volume Down buttons.
The tab has been used about 10 hours per week. I have never uploaded
any ROM or firmware.
The boot loop has started when I was charging my device. I used the
official Samsung USB charging connector as always. During the
charge process, I wanted to see the charge progress like I
have done it many times before but I only saw a grey battery and after that,
the boot loop has started.
I have no problem to do a hard reset and to wipe out my data.
My device contains no important personal data.
What do you recommend to get my device working again?
Thank you in advance!
Hi,
As in the topic, I have J510FN who does not want to turn on. Displays the logo of the galaxy J5 2016 and even without showing the next Samsung logo it resets and the galaxy logo pops up again.
I tried hard reset then uploading a new software by odin.
The upload was successful, however, 32% of "installing system update" pops up "Erasing", the phone resets and the galaxy logo pops up, after a while the phone turns off. When I turn it on, everything goes back to the starting point, ie in the circle the logo galaxy -> reset after a moment and again the logo galaxy.
Recovery mode works, the bootloader works. The phone responds to the start-up and does not want to "go" further, ie to the Samsung logo and turn on.
Please, help, maybe it's an android problem, not a software? I do not know what to do
skailer213 said:
Hi,
As in the topic, I have J510FN who does not want to turn on. Displays the logo of the galaxy J5 2016 and even without showing the next Samsung logo it resets and the galaxy logo pops up again.
I tried hard reset then uploading a new software by odin.
The upload was successful, however, 32% of "installing system update" pops up "Erasing", the phone resets and the galaxy logo pops up, after a while the phone turns off. When I turn it on, everything goes back to the starting point, ie in the circle the logo galaxy -> reset after a moment and again the logo galaxy.
Recovery mode works, the bootloader works. The phone responds to the start-up and does not want to "go" further, ie to the Samsung logo and turn on.
Please, help, maybe it's an android problem, not a software? I do not know what to do
Click to expand...
Click to collapse
Try flashing another kernel like quasar and if it still doesn't boot probably the software.You could try flashing another rom to see if it boots if quasar doesnt boot it.Failing that you probably need to install firmware again with odin
Hi Guys.
My neighbor asked me to check his appliance.
The device is turning on, loading the Motorola Android logo, and after that it starts loading a logo in a circle written `Erasing`.
I already tried holding the ``Power`` button and volume down. But it still remains in bootloop.
I already pulled the battery and tried the process several times, with no solution.
Any suggestions? Please!