Database Users

Notification Queue

Hi all
used that checknotification on my vario II. seems to have deleted alot of stuff, a bit too much i think, as active sync broke because of it. have repaired that part now, just wondering if people could post thier notification lists from memaid or SK so i can compare please.
so far i have
repllog.exe /sched /remote /f
tmail.exe -timersync
\windows\calupd.exe apprunattime
\windows\timewizard.exe apprunattime
\windows\calnot.exe apprunafterrestore
\windows\calnot.exe apprunaftertimechange
\windows\clocknot.exe apprunafterrestore
\windows\clocknot.exe apprunaftertimechange
\windows\repllog.exe apprunaftertimechange
repllog.exe apprunafterrndisfndetected
cheers
jason

repllog.exe AppRunAtRs232Detect
repllog.exe /sched /remote /h <--- *[I have /h, not /f]

yep
and your right i have h as well not f
i have also added connmgr.exe

anyone else able to post their queue please.
would like to make sure ive got it right
cheers
jason

A bug in Messaging for Windows Mobile 5/6?

A little while ago I upgraded to one of lvsw's roms to get the gps and audio (bass) working on my trinity, but found an interesting side effect: i could no longer listen to my voicemail messages (they're emailed to me as .wav files). I'm with 3 in Australia, who send voicemail messages as emails, the title of what is supposed to be the attachment is this really stupid name: "LogicaCMG Voice Message (1.1) (xx seconds)" instead of something normal like "message.wav" or something. When I try to open one of these attachments, Messaging says it doesn't know how to handle this kind of file. I wasn't sure if it was the ROM or what so I upgraded to the most recent ROM from LVSW which supports WM6 (great work btw, seriously!!!) but have found that the problem is still around. It's now clear that its not the roms' fault, but partly MS's, and partly my network operators'. Read on...
I dug a little deeper into the problem and actually downloaded the fully multipart mime source of the emails into thunderbird to find what I think is the culprit here. Have a look at the following (I've omitted the end of the message):
Code:
X-Account-Key: account4
X-UIDL: 1138328986.368
X-Mozilla-Status: 0001
X-Mozilla-Status2: 10000000
Return-Path: <[email protected]>
Received: from auummr1im05.three.com.au (auummr1im05.three.com.au [10.176.58.155])
by auummr0ms03.three.com.au (MOS 3.6.5.5-LCMG)
with ESMTP id AGX08476;
Tue, 3 Apr 2007 17:39:50 +1000 (EST)
Received: from auumun2fe12.three.com.au (auumun2fe12.three.com.au [10.176.54.161])
by auummr1im05.three.com.au (MOS 3.5.5-GR)
with ESMTP id AZO19948;
Tue, 3 Apr 2007 17:39:49 +1000 (EST)
Message-Id: <[email protected]>
Date: Tue, 3 Apr 2007 17:39:49 +1000 (EST)
From: =?utf-8?Q?1234567890?= <[email protected]>
Subject: =?utf-8?Q?Voice_Mess?= =?utf-8?Q?age_From_1?= =?utf-8?Q?234567890?=
To: Nachoesmith <[email protected]>
X-uOneCallID: 1234567890|1234567890
MIME-Version: 1.0 (Voice 2.0)
Content-Type: MULTIPART/Voice-Message; Version=2.0; BOUNDARY="-559023410-1254324197-1175585989=:12676"
---559023410-1254324197-1175585989=:12676
Content-Type: audio/wav
Content-Transfer-Encoding: BASE64
Content-Description: =?utf-8?Q?LogicaCMG_?= =?utf-8?Q?Voice_Mess?= =?utf-8?Q?age_=281=2E1=29_?= =?utf-8?Q?_=2827_secon?= =?utf-8?Q?ds_=29?=
Content-Duration: 27
Content-Disposition: inline; voice=Voice-Message; filename="message.wav"
UklGRuQtAwBXQVZFZm10IBIAAAAHAAEAQB8AAEAfAAABAAgAAABmYWN0BAAA
...
There's probably a few Mozilla tags in the header because I downloaded it from Thunderbird to have a look at the raw form.
There's two interesting things about this message.
1. It contains a Content-Description field.
2. Thunderbird can read the email fine, setting the title of the attachment to "message.wav".
I saved the wav file locally, constructed a new email to be sent to my phone in thunderbird with that wav file and sent it off to my phone. When I received it on my phone, I had no problems playing it at all. Here's what the Thunderbird Sent Message looked like:
Code:
X-Account-Key: account4
X-UIDL: 1138328986.393
X-Mozilla-Status: 0001
X-Mozilla-Status2: 10000000
Return-Path: <[email protected]>
Received: from auumvs1fe05.three.com.au (auumvs1fe05.three.com.au [10.176.61.183])
by auummr0ms03.three.com.au (MOS 3.6.5.5-LCMG)
with ESMTP id AHL21130;
Sat, 12 May 2007 04:12:40 +1000 (EST)
Received: (qmail 16911 invoked from network); 11 May 2007 18:12:39 -0000
Received: from auumvs0vp05.three.com.au (HELO auumvs0mt03.three.com.au) ([10.176.61.246])
(envelope-sender <[email protected]>)
by 0 (qmail-ldap-1.03) with SMTP
for <[email protected]>; 11 May 2007 18:12:39 -0000
Received: (qmail 617 invoked from network); 11 May 2007 18:12:39 -0000
Received: from xxxxx.xxxxxx.com.au (220.233.0.17)
by 0 with SMTP; 11 May 2007 18:12:39 -0000
Received: from xxxxxxx.xxxxxxx.com.au ([xxx.xxx.x.xxx] helo=[192.168.1.20])
by pecan.exetel.com.au with esmtp (Exim 4.63)
(envelope-from <[email protected]>)
id 1HmZbZ-0003v5-RD
for [email protected]; Sat, 12 May 2007 04:12:39 +1000
Message-ID: <[email protected]>
Date: Sat, 12 May 2007 04:12:37 +1000
From: Nachoesmith <[email protected]>
User-Agent: Thunderbird 1.5.0.10 (X11/20060911)
MIME-Version: 1.0
To: [email protected]
Subject: Message
X-Enigmail-Version: 0.94.3.0
Content-Type: multipart/mixed;
boundary="------------000702000200060804040408"
This is a multi-part message in MIME format.
--------------000702000200060804040408
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
--------------000702000200060804040408
Content-Type: audio/x-wav;
name="message.wav"
Content-Transfer-Encoding: base64
Content-Disposition: inline;
filename="message.wav"
UklGRmRBAQBXQVZFZm10IBIAAAAHAAEAQB8AAEAfAAABAAgAAABmYWN0BAAAAEBBAQBkYXRh
The major difference here in the attachment part section is the lack of the Content-Description field. The other difference is that the mime type is x-wav instead of wav, but I've checked that on my phone and it should be fine.
Given that another email client has no problems ignoring this (stupid, in this case) Content-Description field, I'd say that Windows Mobile Messaging sees this field and then completely ignores the content-disposition etc fields. Its also a little wrong that LogicaCMG, who obviously did a little consulting to 3 Australia, decided to approproate the wav file format also.
I guess my question is,
1. Do people think I'm on the right track woth this problem, and
2. Does anyone have any solution that I can implement on my phone to tell it to ignore the Content-Description field, or something else that would work?
Many thanks

Did you ever find a solution to this?
I am seeing the exact same problem, although my setup is a little different.
I am running my own phone pbx (Trixbox with Asterisk). I receive my voicemails as emails and cant listen to them. If I forward them from my desktop there is no problem.
I also tracked it down to windows mobile choking on the Content-Description header. My problem is I can't find a way to remove this from the original message.
Anybody ideas?
Thanks, Brian

I'm sorry to say that I didn't. I instead found some other network settings for 3 Australia that gave me a workaround for my problem. With those other settings the content was passed to my phone correctly.

i'm with three Australia, too and have the same problem
hi there,
I performed a hard reset on my TYTN2 the other day, and now I too have the LogicaCMG bug. What were those connection settings that you were able to change in order to work around the problem?
Regards, David.

Hey there - I am also on 3 Australia and I just updated my ROM in a HTC Touch Pro and I have exactly the same problem.
Please post your workaround/solution.
Cheers,
MadDave

rk-Calendar-Update: Mass Update 'all day Calendar events'[15OCT2007]

There is an issue with the calendar reminders, that is when you have an ‘all day event’ then the device would wake up at 12:00 AM to remind you. For some people it might be ok but most of us want device to show the reminder at some convenient time (such as 08:00 AM when having a coffee).
Here is the possible fix(There might be other solutions too which I am not aware of)
This is a small utility I built which will allow you to mass update all such events to some fixed time span. That is converting all these all day events to non all day with the option to set your own time span.
Update 1.0.1
Now the application also updates all All Day Event's default reminder time as per your requirement.
Choose your reminder hours from the new tab added and update all All day events
It also has a command line interface so if you want to automate this process you could do it as follows.
Code:
To Full day to non full day --> \Program Files\rk-Calendar-Update.exe “08:00” “22:00”
[COLOR=blue]To just change the reminder time(in hours) --> \Program Files\rk-Calendar-Update.exe 13[/COLOR]
Watch the format above and space between the two times specified
For the reminder update just supply the reminder time in hours such as 13 hours in the above example
Important notes:
Utility would convert the actual events to fixed time events permanently. So when synchronize with your desktop pc changes applied back to your pc and all your all day events have been changed to fixed time! If that is acceptable use this app.
I have tested it only on my device(Hermes/WM6) so you test it on your devices (I will recommend some kind of backup before running it just in case )
I have seen some of the events did not convert right away when there is a conflict in appointments. But running the utility again converted all successfully.
You can run this update any number of times, it only updates the full day events if found.
I can add some automation to it, but only if anyone needs that
Note: This application requires Compact Framework 2.0
You need compact framework 2.0 installed inorder to run this application. The compact framework is already part of WM6, so if your device is WM6 skip this step. But most of the WM5 devices do not have this update. So you must download here and run the installation on your desktop (then active sync to update your device). Only after completing this step install the application.
Download from here

Very cool. I am definitely going to try this out as this has been a pet peeve of mine for the longest time! Thanks!

What may have been a better fix would have been to change all the default reminder times from 18 hours to 16 hours (so the reminder goes off at 8am instead of 6am). Then you can still have the "all day event" instead of a fixed period of time, and you can avoid the annoying 6am reminder.
Would it be possible to create a similar fix to the one you created so that all "All day events" are converted to a 16 hour reminder instead of the default 18 hour reminder?

andylen said:
What may have been a better fix would have been to change all the default reminder times from 18 hours to 16 hours (so the reminder goes off at 8am instead of 6am). Then you can still have the "all day event" instead of a fixed period of time, and you can avoid the annoying 6am reminder.
Click to expand...
Click to collapse
For me the 'All Day Events' always woke me up at 12:00 AM(Midnight) irrespective of default reminder time you specified. So what you are saying looks like you are getting the reminders at 6AM since your default reminder time is 18Hrs! Please confirm the above.
andylen said:
Would it be possible to create a similar fix to the one you created so that all "All day events" are converted to a 16 hour reminder instead of the default 18 hour reminder?
Click to expand...
Click to collapse
It is very well possible, but let me understand the issue first(based on the question above)

good stuff........

Yes. That's correct.
I have the default reminder box checked in Tools -> Options -> Preference Tab (Calendar). I do this because I actually do prefer the default reminder of 15 minutes for the meetings/appointments. However, when this is checked, it also sets the new All Day Events to have the default reminder of 18 hours, which causes the reminder alarm to go off at 6am!
The annoying thing is that the default reminder in the "Options" is set at 15 minutes for new meetings/appointments (which can be changed); however, it doesn't give you an option to change the default of the All Day Event reminders from 18 hours to something else.
After some research, I realized it's actually not possible to change the 18 hour default in Outlook. See the bottom of page 3 of this Office Online training: http://dace-rancho.org/QuickRef_MSCal.pdf
So you have to go into each event manually and change the reminder to a different time (change the 18 hours to some other time) in order for it not to wake you up at flippin' 6am! I have so many all day events created that this will be a major pain. Not to mention that I'm sure I will forget to change it each time I create a new one.
So if you can work some magic so that I can keep the default reminder box checked, but have the default reminder changed on "All Day Events" to 16 hours instead of 18 hours, I would really appreciate it (and be very amazed!).
Thanks!

14 - 16 hours chang
or even 12 to start at 10:00 a.m. is rather enought -
would appreciate that toooooooo - plzzz change - beside
it is one of my most prefered features as i keep my brains
sticking in the touch - contacts, calendar, notes ...
thxs in advance

Update 1.0.1
Now the application supports mass update of 'Reminder Time' of all day events

Awesome! I'm excited to try it out. (The stupid alarm woke me up again this morning.) Thanks so much for your help!!!

other solution
This script above did not work for me. I got some error after installing it. Therefore I decided to write my own macro.
This is what it does: when outlook start, it checks all calendar items, if one of them has a reminder set to18 hours before, then the reminder is disabled
Running this script takes a few seconds (depending on the number of items in your calender) every time Outlook starts.
To install this script do the following:
• In outlook type Alt-F11 (the VBA editor window will pop up).
• Double click on Microsoft outlook Objects/ThisOutlookSession and copy/paste the following code in the right window:
Code:
‘This script was created by Ruut Brandsma on 12/04/2007
Private Sub Application_Startup()
Call Check_all_calender_items_and_disable_reminder_if_set_to_18_hours
End Sub
Sub Check_all_calender_items_and_disable_reminder_if_set_to_18_hours()
Set myNamespace = Application.GetNamespace("MAPI")
Set Application.ActiveExplorer.CurrentFolder = myNamespace.GetDefaultFolder(olFolderCalendar)
For Each item In Application.ActiveExplorer.CurrentFolder.Items
With item
If .Class = olAppointment Then
If .ReminderMinutesBeforeStart = 18 * 60 And .ReminderSet Then
.ReminderSet = False
.Save
End If
End If
End With
Next
Set Application.ActiveExplorer.CurrentFolder = myNamespace.GetDefaultFolder(olFolderInbox)
End Sub
• Close your outlook. Say yes to the save changes popup.
• Restart outlook and during startup all calendar items are checked and if needed adjusted.
If you not want to disable the reminders, but only to adjust the reminder time from 18 hours to e.g. 15 hours, just replace ".ReminderSet = False" in the code above to ".ReminderMinutesBeforeStart = 15 * 60"
I used Outlook Profesiional 2003 to test the script, but might also work for other version.

How do you make it run when new appointments are received
I did some modifications for all day event and made it start at the end of outlook startup.. But a new appointement requires me to rerun the script or restart outlook.
Private Sub Application_MAPILogonComplete()
Call Check_all_calender_items_and_disable_reminder_if_set_to_18_hours
End Sub
Sub Check_all_calender_items_and_disable_reminder_if_set_to_18_hours()
Set myNamespace = Application.GetNamespace("MAPI")
Set Application.ActiveExplorer.CurrentFolder = myNamespace.GetDefaultFolder(olFolderCalendar)
For Each Item In Application.ActiveExplorer.CurrentFolder.Items
With Item
If .Class = olAppointment Then
If .AllDayEvent = True Then
.ReminderSet = True
.ReminderMinutesBeforeStart = 15 * 60
.Save
End If
End If
End With
Next
Set Application.ActiveExplorer.CurrentFolder = myNamespace.GetDefaultFolder(olFolderInbox)
End Sub

I think I have found a bug. The automatic update daylight savings time happened twice last month on my HD2 after using this.

MessageInterceptor NotifyAndDelete - message still comes through after delay

static void Main()
{
if (!MessageInterceptor.IsApplicationLauncherEnabled("aPush"))
{
MessageInterceptor rule = new MessageInterceptor(InterceptionAction.NotifyAndDelete,false);
MessageCondition condition = new MessageCondition(MessageProperty.Body,
MessagePropertyComparisonType.Contains,
"NEW EMAIL jjj123", true);
rule.MessageCondition = condition;
rule.EnableApplicationLauncher("aPush", @"\Program Files\push\push.exe", "EventFired");
}
OutlookSession session = new OutlookSession();
Microsoft.WindowsMobile.PocketOutlook.MessagingApplication.Synchronize(session.EmailAccounts["asu.edu"]);
Application.Exit();
}
The application is successfully launched, syncs my email, and exits, but the SMS message still comes through after a short delay - what am I doing wrong?
I hae also noticed that all other pending sms messages are delayed until this one comes through too which can be up to a minute... What gives?

GMT time error...help!

Since installing Dutty's ROM I have had a daily error as follows:
"Invalid timer occured, use setting menu to set valid parameters. Also make sure your device Timezone GMT matches your city Timezone GMT. You can change your device Timezone GMT from Settings -> More -> Date & Time menu"
I have checked and made sure my GMT timezone is correct...selected as "GMT London, Dublin" within Settings -> Clocks & Alarms...and this matches my city, but keep getting this problem, especially around 2300 and 0000 hours. However if I change the time to one hour ahead then the error disappears (but my clock is 1 hour ahead)!? Is there any way to change the GMT to daylight savings so the one hour is adjusted automatically?
Thabks for any advice