I already give a try to SetCPU and now I'm using OPG Pro and when I try to put Powersave mode or another one, I can't. I can only choose the interactive mode. Why? Is due my processor?
Smartphone: Meizu M2 Note (rooted)
CPU: ARM Cortex-A53
Processor: AArch64 Processor rev 4 (aarch64)
Hardware: MT6733
Cores: 8
OS: Flyme (based on android 5.1)
No one??
Hi, my english isn´t very good but i hope you understand, here i go.
I buy a chinese Note 4 and i need help to find and flash a new room, these are my model info:
MediaTek MT6572 1.00 GHz
Cores: 2
Architecture: 2x ARM Cortex-A7 @ 1.00 GHz
Revision: r2p1
Process: 28nm
Clock Speed: 598 MHz - 1.00 GHz
GPU Vendor: Qualcomm
GPU Renderer: Adremo(TM)330
Scaling Governor: hotplug
Model: Samsung Galaxy Note 4 Duos (N9100)
Brand: samsung
Board: rtech72_we_72_kk
Hardware: mt6572
Screen Size: 5.70 inches
Screen Resolution: 540 x 960 pixels
Screen Density: 193 dpi
Dimensions: 153.5 x 78.6 x 8.5 mm
Weight: 175 g
Total RAM: 1860 MB
Internal Storage: 1.27 GB
Release Date: 2014-10-01
Android Version: 4.4.2
API Level: 19
Bootloader: unknown
Build ID: ALPS.KK1.MP6.V1
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv71
Kernel Version: 3.4.0-1273465(G900SKSU1AND3)
Root Access: No
Thanks for reading
I'm pretty sure that is not a Samsung Note 4....
Almost every line does not match the Samsung specs...
Hi all,
I've bought a sympatic Android car autoradio on Android 4.4. I've succesfully rooted it via Kingroot, replaced by SuperSu, but I don't know where I can found a cimpatible CWM or other recovery.
Here is the specs of the tablet (via CPU-Z):
Cores: 4
Architecture: 4x ARM-Cortex A7 @ 1.60GHz
Revision: r0p3
Clock Speed: 166 MHz - 1.60 GHz
CPU 0: 1600 MHz
CPU 1: 1600 MHz
CPU 2: stopped
CPU 3: stopped
CPU Load: 5%
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
GPU Load: 0%
Scaling Governor: userspace
Model: AC8227
Manufacturer: ATC
Brand: Android
Board: Unknown
Hardware: autochipsac83xx
Screen Size: 7066,53 inches
Screen Resolution: 800x400 pixels
Screen Density: 0dpi
Toal RAM: 835MB
Available RAM: 196MB (23%)
Internal Storage: 0,29 GB
Available Storage: 0,17GB (58%)
Android Version: 4.4.4
API Level: 17
Bootloader: unknown
Build ID: JDQ39E.V3.10.02-20160711
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv71
Kernel Version: 3.4.35 (V3.10.02-20160711)
Root Access: Yes
System Uptime: 00:07:09
Click to expand...
Click to collapse
I need a recovery for flashing Gapps, principaly for the Play Store. simply install a Play Store apk doesn't work, install a modded version via Lucky Patcher does'nt work...
Have you any idea please?
Is anybody know what is this version of my Firmware?
haoling_00009_V001_20191128 I have problem with my Feder-balance Icon on the Audio setting page.
Thank!
Android: haoling_00009_V001_20191128
Android os: 9.1 XY AUTO: 3.1 (8227L)
CAN Pro: 3.0 (8227L)
DDR: 2G FLASH: 32G
cpu: A7 1.3GHz X 4
display: 1024*600
MCU: 3.1 (8227L)
CORTEX ARM Cortex-A7
Cores: 4
Architecture: 4X ARM Cortex-A7 @ 1.12Ghz
Revision: r0p3
Clock speed:
CPU0: 1118MHz
CPU1: 1118MHz
CPU2: 1118MHz
CPU3: 1118MHz
CPU Load: 99%
GPU Vendor: ARM
GPU Renderer: Mali-450 MP
GPU Load: 0%
Scaling Governor: performance
DEVICE:
Model: 8227L_demo_(full_8227L_demo)
Manifacturer: alps
Board: Unknow
Hardware ac8227l
Screen Size 7.42 Inches
Screen Resolution: 1024*600
Screen Density: 159 dpl
Total RAM: 1024 MB
Avaliable RAM: 609 MB (59%)
Internal Storage: 26.58 GB
Avaliable Storage: 18.91 GB (71%)
SYSTEM:
Android Version: 8.1Go
API Level: 23
Security Patch Level: 2017-11-05
Bootloader: Unknow
Java VM: ART 2.1.0
OpenGL WS: 2.0
Kernel Architecture: armv7l
Kernel Version: 3.18.22(1574920303)
Root Access: No
Google Play Service: 20.04.14 (040300-294335909)
System Uptime: 2 days 02.03.56
i have this same firmware.No fader/balance etc.Im still waiting for ota.Maybe in future
fergeteg said:
Here is the linkhttp://www.mediafire.com/folder/sa41gjayjje91/YT9213A_Update
Click to expand...
Click to collapse
YT9213A works for me
YT9213AJ don't work...
---------- Post added at 11:28 PM ---------- Previous post was at 11:27 PM ----------
Please make a Backup of your unit.
I haven't... ?
hi, this kernel is a modified version of the eureka kernel
the changes from eureka kernel 7.0 to this kernel are:
overclocked CPU as follows:
BIG Colors: from 2184 MHz to 2288 MHz.
LIL Colors: from 1690 MHz to 1794 MHz.
Underclocked CPU as follows:
BIG Colors: from 312 MHz to 208 MHz.
LIL Colors: from 343 MHz to 208 MHz.
zswap module has been activated (better ram management)
Dynamic fsync can be turned off and on in hktweaks or another application that manages the kernel.
page boost activated
branch optimization
cache clear driver has been enabled
Transparent Hugepage Support in madsive mode (performance boost)
Upstreamed kernel version from 4.4.270 to 4.4.275
the kernel was compiled with proton clang-13 + O3 (higher performance)
Mod Edit: DL links removed
Manteiga25 said:
hi, this kernel is a modified version of the eureka kernel
the changes from eureka kernel 7.0 to this kernel are:
overclocked CPU as follows:
BIG Colors: from 2184 MHz to 2288 MHz.
LIL Colors: from 1690 MHz to 1794 MHz.
Underclocked CPU as follows:
BIG Colors: from 312 MHz to 208 MHz.
LIL Colors: from 343 MHz to 208 MHz.
zswap module has been activated (better ram management)
Dynamic fsync can be turned off and on in hktweaks or another application that manages the kernel.
page boost activated
branch optimization
cache clear driver has been enabled
Transparent Hugepage Support in madsive mode (performance boost)
Upstreamed kernel version from 4.4.270 to 4.4.275
the kernel was compiled with proton clang-13 + O3 (higher performance)
Click to expand...
Click to collapse
Thx. This kernel did not cause it to reboot randomly.
Manteiga25 said:
hi, this kernel is a modified version of the eureka kernel
the changes from eureka kernel 7.0 to this kernel are:
overclocked CPU as follows:
BIG Colors: from 2184 MHz to 2288 MHz.
LIL Colors: from 1690 MHz to 1794 MHz.
Underclocked CPU as follows:
BIG Colors: from 312 MHz to 208 MHz.
LIL Colors: from 343 MHz to 208 MHz.
zswap module has been activated (better ram management)
Dynamic fsync can be turned off and on in hktweaks or another application that manages the kernel.
page boost activated
branch optimization
cache clear driver has been enabled
Transparent Hugepage Support in madsive mode (performance boost)
Upstreamed kernel version from 4.4.270 to 4.4.275
the kernel was compiled with proton clang-13 + O3 (higher performance)
kernel source code:
GitHub - Chatur27/Eureka-Kernel-Exynos7885-Q-R: A custom kernel for the Exynos7885 chipset smarphones based on Android 10/11/12. Currently supports A10, A20, A20e, A30, A30s and A40. Eureka kernel source has moved to: https://github.com/eurekadevelop
A custom kernel for the Exynos7885 chipset smarphones based on Android 10/11/12. Currently supports A10, A20, A20e, A30, A30s and A40. Eureka kernel source has moved to: https://github.com/eurekade...
github.com
Credits to @Chatur27 for the kernel source code.
Click to expand...
Click to collapse
You cannot just release the kernel under another name just because you compiled it yourself.
All this are Eureka features.
Btw, ZRam is broken when enabled together with ZSwap. I bet you did not verify this.
Manteiga25 said:
hi, this kernel is a modified version of the eureka kernel
the changes from eureka kernel 7.0 to this kernel are:
overclocked CPU as follows:
BIG Colors: from 2184 MHz to 2288 MHz.
LIL Colors: from 1690 MHz to 1794 MHz.
Underclocked CPU as follows:
BIG Colors: from 312 MHz to 208 MHz.
LIL Colors: from 343 MHz to 208 MHz.
zswap module has been activated (better ram management)
Dynamic fsync can be turned off and on in hktweaks or another application that manages the kernel.
page boost activated
branch optimization
cache clear driver has been enabled
Transparent Hugepage Support in madsive mode (performance boost)
Upstreamed kernel version from 4.4.270 to 4.4.275
the kernel was compiled with proton clang-13 + O3 (higher performance)
kernel source code:
GitHub - Chatur27/Eureka-Kernel-Exynos7885-Q-R: A custom kernel for the Exynos7885 chipset smarphones based on Android 10/11/12. Currently supports A10, A20, A20e, A30, A30s and A40. Eureka kernel source has moved to: https://github.com/eurekadevelop
A custom kernel for the Exynos7885 chipset smarphones based on Android 10/11/12. Currently supports A10, A20, A20e, A30, A30s and A40. Eureka kernel source has moved to: https://github.com/eurekade...
github.com
Credits to @Chatur27 for the kernel source code.
Click to expand...
Click to collapse
Those features already are present in eureka kernel, you just reposted it.
Thread closed due to improper authorship.