hi, this kernel is a modified version of the eureka kernel
the changes from eureka kernel 7.0 to this kernel are:
overclocked CPU as follows:
BIG Colors: from 2184 MHz to 2288 MHz.
LIL Colors: from 1690 MHz to 1794 MHz.
Underclocked CPU as follows:
BIG Colors: from 312 MHz to 208 MHz.
LIL Colors: from 343 MHz to 208 MHz.
zswap module has been activated (better ram management)
Dynamic fsync can be turned off and on in hktweaks or another application that manages the kernel.
page boost activated
branch optimization
cache clear driver has been enabled
Transparent Hugepage Support in madsive mode (performance boost)
Upstreamed kernel version from 4.4.270 to 4.4.275
the kernel was compiled with proton clang-13 + O3 (higher performance)
Mod Edit: DL links removed
Manteiga25 said:
hi, this kernel is a modified version of the eureka kernel
the changes from eureka kernel 7.0 to this kernel are:
overclocked CPU as follows:
BIG Colors: from 2184 MHz to 2288 MHz.
LIL Colors: from 1690 MHz to 1794 MHz.
Underclocked CPU as follows:
BIG Colors: from 312 MHz to 208 MHz.
LIL Colors: from 343 MHz to 208 MHz.
zswap module has been activated (better ram management)
Dynamic fsync can be turned off and on in hktweaks or another application that manages the kernel.
page boost activated
branch optimization
cache clear driver has been enabled
Transparent Hugepage Support in madsive mode (performance boost)
Upstreamed kernel version from 4.4.270 to 4.4.275
the kernel was compiled with proton clang-13 + O3 (higher performance)
Click to expand...
Click to collapse
Thx. This kernel did not cause it to reboot randomly.
Manteiga25 said:
hi, this kernel is a modified version of the eureka kernel
the changes from eureka kernel 7.0 to this kernel are:
overclocked CPU as follows:
BIG Colors: from 2184 MHz to 2288 MHz.
LIL Colors: from 1690 MHz to 1794 MHz.
Underclocked CPU as follows:
BIG Colors: from 312 MHz to 208 MHz.
LIL Colors: from 343 MHz to 208 MHz.
zswap module has been activated (better ram management)
Dynamic fsync can be turned off and on in hktweaks or another application that manages the kernel.
page boost activated
branch optimization
cache clear driver has been enabled
Transparent Hugepage Support in madsive mode (performance boost)
Upstreamed kernel version from 4.4.270 to 4.4.275
the kernel was compiled with proton clang-13 + O3 (higher performance)
kernel source code:
GitHub - Chatur27/Eureka-Kernel-Exynos7885-Q-R: A custom kernel for the Exynos7885 chipset smarphones based on Android 10/11/12. Currently supports A10, A20, A20e, A30, A30s and A40. Eureka kernel source has moved to: https://github.com/eurekadevelop
A custom kernel for the Exynos7885 chipset smarphones based on Android 10/11/12. Currently supports A10, A20, A20e, A30, A30s and A40. Eureka kernel source has moved to: https://github.com/eurekade...
github.com
Credits to @Chatur27 for the kernel source code.
Click to expand...
Click to collapse
You cannot just release the kernel under another name just because you compiled it yourself.
All this are Eureka features.
Btw, ZRam is broken when enabled together with ZSwap. I bet you did not verify this.
Manteiga25 said:
hi, this kernel is a modified version of the eureka kernel
the changes from eureka kernel 7.0 to this kernel are:
overclocked CPU as follows:
BIG Colors: from 2184 MHz to 2288 MHz.
LIL Colors: from 1690 MHz to 1794 MHz.
Underclocked CPU as follows:
BIG Colors: from 312 MHz to 208 MHz.
LIL Colors: from 343 MHz to 208 MHz.
zswap module has been activated (better ram management)
Dynamic fsync can be turned off and on in hktweaks or another application that manages the kernel.
page boost activated
branch optimization
cache clear driver has been enabled
Transparent Hugepage Support in madsive mode (performance boost)
Upstreamed kernel version from 4.4.270 to 4.4.275
the kernel was compiled with proton clang-13 + O3 (higher performance)
kernel source code:
GitHub - Chatur27/Eureka-Kernel-Exynos7885-Q-R: A custom kernel for the Exynos7885 chipset smarphones based on Android 10/11/12. Currently supports A10, A20, A20e, A30, A30s and A40. Eureka kernel source has moved to: https://github.com/eurekadevelop
A custom kernel for the Exynos7885 chipset smarphones based on Android 10/11/12. Currently supports A10, A20, A20e, A30, A30s and A40. Eureka kernel source has moved to: https://github.com/eurekade...
github.com
Credits to @Chatur27 for the kernel source code.
Click to expand...
Click to collapse
Those features already are present in eureka kernel, you just reposted it.
Thread closed due to improper authorship.
Related
Hi all,
I've bought a sympatic Android car autoradio on Android 4.4. I've succesfully rooted it via Kingroot, replaced by SuperSu, but I don't know where I can found a cimpatible CWM or other recovery.
Here is the specs of the tablet (via CPU-Z):
Cores: 4
Architecture: 4x ARM-Cortex A7 @ 1.60GHz
Revision: r0p3
Clock Speed: 166 MHz - 1.60 GHz
CPU 0: 1600 MHz
CPU 1: 1600 MHz
CPU 2: stopped
CPU 3: stopped
CPU Load: 5%
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
GPU Load: 0%
Scaling Governor: userspace
Model: AC8227
Manufacturer: ATC
Brand: Android
Board: Unknown
Hardware: autochipsac83xx
Screen Size: 7066,53 inches
Screen Resolution: 800x400 pixels
Screen Density: 0dpi
Toal RAM: 835MB
Available RAM: 196MB (23%)
Internal Storage: 0,29 GB
Available Storage: 0,17GB (58%)
Android Version: 4.4.4
API Level: 17
Bootloader: unknown
Build ID: JDQ39E.V3.10.02-20160711
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv71
Kernel Version: 3.4.35 (V3.10.02-20160711)
Root Access: Yes
System Uptime: 00:07:09
Click to expand...
Click to collapse
I need a recovery for flashing Gapps, principaly for the Play Store. simply install a Play Store apk doesn't work, install a modded version via Lucky Patcher does'nt work...
Have you any idea please?
ORGANIC KERNEL
"Best out of the Rest"
Click to expand...
Click to collapse
FEATURES
-Compiled with latest GCC
-F2FS and sdcardfs support
- Cpu overclocked to 1.67 GHz (under safe parameters)
-CPU boost driver
-advanced TCP congestion
-added support to stop screenburning
- Fingerprint boost driver
-some other UnderTheHood tweaks
-spectrum support
Changelog For Organic 2.0
-add GPU tweaks
-enable wireguard
-add additional power drivers
- enable idling GPU frequency (better battery management)
-based on sunnyraj CAF source (thanks to Sunny Raj again)
Flashing Guide
- Reboot to recovery
- Backup your current kernel(boot.img)
- Go to install
- Flash kernel zip
- Reboot
- Enjoy!!
Note :- Flash only on roms which have new led drivers
For example crdroid official is update with new led drivers so you can use organic on it !!
Credit:
Sunnyraj for Source
XDA : DevDB Information
Organic Kernel, Kernel for Xiaomi Redmi 5A
Contributors
@theorganisms
Join our telegram group for support and
Bug report
https://t.me/organickernel
Kernel Source
https://github.com/TheOrganisms/kernel_organic
Version Information
Status: Stable
Download
SourceForge
Current Stable Version v2.0
Current release :- 28/02/2019
stable release :- 28/02/2019
First release :- 28/02/2019
Is this kernel support for riva running aex 6.3 android pie?
gozarudin said:
Is this kernel support for riva running aex 6.3 android pie?
Click to expand...
Click to collapse
If it has new led drivers, yes
Why this kernel not have updates?
Bought this off bay market with fake 8.1 but it's really a kitkat. Can't find info anywhere maybe due to it's age. Hoping someone here has similar one before upgrading.
Device info:
Labels on MB: ZH5005MAIN-MIPI-PCB
l2017-12-29 V01
K3_20180627
K3_V2.0-01C3
SMT_D_B_M_Q_
Chips label:
MUC: EW3036AC
MT6627N
GM71508C
MT6323GA
MT6166V
MT6682V
Device info from app:
Model: K6_01_IH (yk858_emmc_wcdma)
Baseband Version: MOLY.WR8.W1315.MD.WG.MP.V10, 2014/05/13 18:15
RIL Version: Not Available
Build Number: ALPS.KK1.MP1.V2.11
Build Fingerprint: alps/yk858_emmc_wcdma/yk858_emmc_wcdma:4.4.2/KOT49H/1533356118:user/test-keys
Bootloader: unknown
Java VM: Dalvik 1.6.0
OS Version: Kitkat (8.1)
SDK: 19
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: yk858_emmc_wcdma
Chipset: MT6582
Cores: 4
Clock Speed: 598 MHz - 1300 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU Governor: hotplug
Kernel Version: 3.4.67
Kernel Architecture: armv7l
GRAPHICS
Renderer: Mali-400 MP
Vendor: ARM
OpenGL Version: OpenGL ES 2.0
I have a similar unit to yours. The "brand name" is YODY and i cant find any info on it. Its running fake 6.0. I found it has root but only in terminal emulator. I dont know a whole lot about mediatek units but they seem very different compared to other android phones i've messed around with so i've been reading up on them before i try to do anything to it. I would like to get full root and install viper and boost the mic gain. An upgrade to 8.1 would be great but i cant find firmware. I think whatever we do we will have to do it all on our own. Anyways here are some of my specs:
Model
K6_02_GH
System K6_02_GH_V2.0.1_20181128
Kernel
3.4.67
MCU
CM_0.7786.0_180307_15:14
App
MT1002_V1.0.9
SoC
MT6582
Board
yk858_emmc_wcdma
BuildID
ALPS.KK1.MP1.V2.11
eng.liuyang.1543395062
Firmware options
Do a search for the Ezonetronics RM-CT0011. There are 2 or 3 versions of firmware on a russian site. I've tried them, they're nothing spectacular with no real improvements on the known bugs. I'm currently using a version dated 2018-05-05
My rooted XT1641 32GB is from Koodo Canada. Current ROM: Stock 8.1.0 (athene-8.1.0-OPJ28.111-22).
HWInfo app gave me this. Notice: Machine=armv7l. ABI=armeabi-v7a.
But Google says: "The Qualcomm Snapdragon 617 MSM8952 is a mid-range ARMv8-based SoC".
Is that because of my Provider-ROM ? Important though since gApps and apk depend on. Could somebody check with your version please. Thank you.
............................................
SOC
SoC Snapdragon 617
CPU msm8952
Vendor Qualcomm
Cores 8
big.LITTLE 2 clusters
Clusters 4 x 1.52 GHz
4 x 1.21 GHz
Family Cortex-A53
Machine armv7l
ABI armeabi-v7a
Instructions swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 evtstrm
Process technology 28 nm
Revision r0p4
Clock speed 806 - 1516 MHz
Governor interactive
GPU Adreno (TM) 405
Vendor Qualcomm
OpenGL ES 3.2 [email protected] ([email protected], I47556f00c5) (Date:04/30/18)
Clock speed 240 - 550 MHz
Though the Snapdragon 617 is 64 bit capable, the stock ROM (including TWRP flashables) is 32 bit in nature (likely a reason for the armv7 architecture shown, which is the same in my G4 Plus). Hence on stock firmware, you'll need 32 bit apps.
If you're wanting to make use of the 64 bit capability, you'll need a 64 bit TWRP and a 64 bit custom ROM, along with 64 bit (ARM-64) GApps.
physwizz A10 (SM-a105xx) v1.0
For OneUI 3.1 for GSI (Q or R)
@physwizz
-Samsung securities disabled.
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 312 - 2184
-Little: 343 - 1690
-GPU: 343 - 1300 without custom dtbo
-GPU thermal and voltage control
-Extended battery life
-Spectrum support enabled
-Zram
Use stock dtbo.img from your baseband (not your kernel or your ROM)
Flash magisk for root
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
physwizz collection
A collection of guides, kernels and ROMs. Guides Complete Guide to the A20 GSIs for the A20 Quick Root and TWRP for the A20 Making my First Kernel for the A20 A20 Rooting Guide Making Your Own ROM Making Your Own Version of QwizzROM-a20...
forum.xda-developers.com
Dtbo installer
Extract stock dtbo.img from your firmware.
Add to the zip using zarchiver.
Use stock dtbo.img from your baseband (not your kernel or your ROM)