No clockworkmod recovery screen - GT540 Optimus General

No clockworkmod recovery screen... cyanogenmod 7. Android 2.3.2 Russian fastboot. Was working , I haven't factory reset after upgrading to cm7, help please.....
Sent from my GT540 using XDA App

deamonjones said:
No clockworkmod recovery screen... cyanogenmod 7. Android 2.3.2 Russian fastboot. Was working , I haven't factory reset after upgrading to cm7, help please.....
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
try reflashing the clockwork only and wipe >>factory reset , hope it helps

How do you flash it on it's own? Sorry for the dumb question! Cheers. :-d
Sent from my GT540 using XDA App

Not very experienced with clockworkmod
Sent from my GT540 using XDA App

download clockwork and put your phone into fastboot mode then run cmd cd to the location of fastboot.exe and type this in
fastboot flash recovery recovery.img
clockwork download
http://www.mediafire.com/?pbpez29fvvbz7el

cheers will give it a go

anyway of doing it through clockwork ie dropping the recovery in manually to the backup folder on the phone? cheers

could we possibly share clockworkmod backup images if we used same system and same clockworkmod serial? maybe a image database with all workable clockworkmod recoveries? is this just incompatible or could it be done if both had same system ie cyanmod 7 2.2.3 and clockwork mod say for eg 3.0.0.5? noob dream?....!!!

deamonjones said:
could we possibly share clockworkmod backup images if we used same system and same clockworkmod serial? maybe a image database with all workable clockworkmod recoveries? is this just incompatible or could it be done if both had same system ie cyanmod 7 2.2.3 and clockwork mod say for eg 3.0.0.5? noob dream?....!!!
Click to expand...
Click to collapse
Hi the ROM has nothing to do about it maybe i think could be a problem with the clockwork mode version but everybody should have it updated.
There is a file with .Md5 extension that is in charge of the only 1 validation of the original file(.img files), if any of these files has been corrupted then the validation will fail.
MD5 data is created by a algorithm that examines the original file and creates a short(-ish) checksum data string out of the original file's characteristics​
And the validation of what im saying is that we can go back to past ROMS with any problem
Greetings!

Thanks for explanation but could you help with my clockworkmod issues? Eohogen told me what to do but I'm a bit slow could you explain what he means and all the steps involved please no disrespect to him but he must have thought I'm more tech savvy than I am cheers
Sent from my GT540 using XDA App

deamonjones said:
Thanks for explanation but could you help with my clockworkmod issues? Eohogen told me what to do but I'm a bit slow could you explain what he means and all the steps involved please no disrespect to him but he must have thought I'm more tech savvy than I am cheers
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
Hello ok i will help you with this:
1. you need to download the recovery_clockwork_3.0.0.5_swift.img file from here:
http://www.mediafire.com/?pbpez29fvvbz7el
2. copy the file into the C:\*SDK\tool folder, like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. put your phone into fastboot mode (hold CAMERA+POWER button) until you pass LG logo and see nothing else than a black screen
4. plug your phone to you computer
5. open the command prompt of your windows (CMD)
6. type
Code:
cd C:\*SDK\tools
fastboot -w (wipe data just in case)
fastboot flash recovery recovery_clockwork_3.0.0.5_swift.img
fastboot reboot
7. once is done unplug you phone wait 2 minutes for let the applications and so load properly
8. reboot in recovery mode to test if it worked!
GOOD LUCK!

Thanks lavero I will go on the big site and thank you properly in a bit but thanks again mate,working night shift so pretty busy now getting ready but will give it a whirl when I get home...deamonjones
Sent from my GT540 using XDA App

deamonjones said:
Thanks lavero I will go on the big site and thank you properly in a bit but thanks again mate,working night shift so pretty busy now getting ready but will give it a whirl when I get home...deamonjones
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
you're welcome
Heres the latest version of clockworkmod just in case you want to give it a try too:
Recovery_clockwork_3.0.1.3
http://www.mediafire.com/?7xb4q35kwq1iutx
*Everything you need you can find it by clicking the link located in my signature

thanks..... i was gunna say man.... but just seen a picture of you...you are not a geekyman,but a very hot S/A Girl...you just made my night thanks for the info and thanks for being HOT

deamonjones said:
thanks..... i was gunna say man.... but just seen a picture of you...you are not a geekyman,but a very hot S/A Girl...you just made my night thanks for the info and thanks for being HOT
Click to expand...
Click to collapse
LMAO , you're welcome!

deamonjones said:
thanks..... i was gunna say man.... but just seen a picture of you...you are not a geekyman,but a very hot S/A Girl...you just made my night thanks for the info and thanks for being HOT
Click to expand...
Click to collapse
haha typical fella when it comes to girls lmao

Thanks again...works fine...I'm not that surprised that you're a girl just surprised your good looking....most young handsome people like yourself would have better things to do no offence we enjoy modifying our phone but I've got an excuse I'm married with two kids lol...xxx
Sent from my GT540 using XDA App

Ur married dont say stuff like that! Your wife may check ur history!
Im 14 and i know that!
Though you are right about the hottness!
Mark

Yeah right there mate no problem with my history always a gentleman! Anyway Pash what rom you running? What's in 2.3.3 that's not in 2.2.2 like it apart from battery issues...happy flashing
Sent from my GT540 using XDA App

Sorry that's what is different between 2.3.2. And 2.3.3
Sent from my GT540 using XDA App

Related

(Q) I'm stuck?

Ok so awhile back I downloaded and installed a leaked 2.2 version for the epic and its been ok just tired of it, but now when trying to go to a different rom nothing works, clockwork has always givin me some issues on this phone an on m old one that got replaced for bad proximity sensors.
What am I doing wrong? I tried the rom manager method of getting clockwork's mod to work but nothing, tried re flashing the recovory image and that failed for some read only issue now that I've never seen before and is clockworks mod supposed to stick cause the one time I got it to work so I could install this rom (which sucks) after I was it never worked again? This is just really annoying for me since I never have had issues in the past with rom installed htc was easier the g1 and hero where do damn easy what is with this epic crap not doing what I want it to do?
Sent from my SPH-D700 using XDA App
Have you tried the one click method for root and clockwork? You need to have the samsung drivers installed and you have to get another usb cable. The one that comes with the epic is only good for charging.
Sent from my Epic running Viper Rom 3.0.3
Yea I've tried that and sometimes it works andsometimes it fails, last night I was failing saying "read-only file system" and would not finish the img flash.
Sent from my SPH-D700 using XDA App
It is very easy to install ROM's on the Epic... So i'm thinking you're doing something wrong.
Are you sure you have clockwork installed and NOT stock? Back when I first started working with the Epic (Rooting & Flashing) I had problems figuring out what clockwork really was.. Clockwork is GREEN & Stock is BLUE.
Also another thing I did was unrooted and then rooted using the latest One Click Root W/ Clockwork, after that everything seemed to work fine. IF I am correct, the ROM Manager Clockwork does not work for the Epic? Well at least it never worked for mine.
grimproductions said:
Yea I've tried that and sometimes it works andsometimes it fails, last night I was failing saying "read-only file system" and would not finish the img flash.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Try going to adb and type this: adb shell. Once the shell pops up enter "su" and then this command: mount -o remount,rw /dev/block/stl9 /system
If you get an error, you aren't rooted.
Or alternatively, adb shell mount -o remount,rw /dev/block/stl9 /system
Sent through the Cosmos by Carl Sagan
Lol kk so this should work then ill try when I get home.
Is clockwork suppsed to stick though? So that ny time I boot into recovery it should be there, that's wat I thought should happen with changing the recovery image but it never stuck and won't load.
If that command doesn't change anything ill take a video and show what happpens when trying to chage the rom's, I can't be the only person having the problem.....
Sent from my SPH-D700 using XDA App
tried that command say's premissions denied?? I have super users permissions and have a custom rom wtf is going on here? this just does not make sense to me any more at all, tried to run the root file again on the phone and that failed saying its a read only file system?
also tried to run a "unroot.batch" file and same issue says that its a read only file system??
grimproductions said:
tried that command say's premissions denied?? I have super users permissions and have a custom rom wtf is going on here? this just does not make sense to me any more at all, tried to run the root file again on the phone and that failed saying its a read only file system?
Click to expand...
Click to collapse
Does the su command work? If not then agan, you aren't rooted. You will know because the $ sign will change to #. Try running the one click root method again, specifically the 2.5 version that contains root and cwm. I don't understand how you can't be rooted though with a custom ROM. Somehow something isn't working, maybe the mount script is corrupt but who knows. I suggest odin back to stock DK28 and root and cwm from there with the newest one-click. Let me know if that helps, also feel free to pm me if you need specifics
Sent through the Cosmos by Carl Sagan
yes that command works
i just took a bunch of screen shots ill upload them in a second!
forgot to invert the colors but you can see that im rooted..... Oo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and this is what i get when trying to root/unroot/ install CWM
does not work for me either :\
http://forum.xda-developers.com/showthread.php?t=853209
Try re-downloading the 2.5.5 one click root. May have modified a file accidentally or something. Also; if you're on a desktop.. plug the cord into the back not the front panel of the pc.
The stock cables do work for data.. unless it got damaged somehow.
Sent from my SPH-D700 using XDA App
No the stock cable should work for data but usually doesn't. 99% of people who have been having issues rooting, their problem has been the stock cable. It is crap.
Sent from my Epic running Viper Rom 3.0.3
Thomas an I got it to work last night tried a lot of things and then it randomy worked with the 2.5.5 and CWM is sticking now, yea I'm going to buy another cable seems like it probably could be causing some issues. Thanks for the help guys, going to flash DK28 tonight and try out emotionless's rom or amphibios
Sent from my SPH-D700 using XDA App
Got my new epic today just wondering how to install dk28? Or maybe should I do the Dj29 modem. My old phones screen was trying to fall of, the hinge was shot after a month this one feels great though. Odin was not working for me I think my compy hates me after I boot to download mode it won't find the phone.... any help? Maybe I'm doing it wrong
Sent from my SPH-D700 using Tapatalk
Your baseband needs updated from the pics you put on here. Your modem Is still on eclair not froyo. Flash that thru Odin
Yea that's what I said I was trying but when in download mode th phone does not connect to the computer.....
Sent from my SPH-D700 using Tapatalk

Cyanogenmod 7 for the Atix [UNOFFICIAL][ROM]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are all waiting for the official builds of CM7 for the Atrix right? Yes. Well I took the source and compiled it for my self (because I'm a curious george) and IT WORKS! I take no credit for doing anything except compiling the source. Please thank the Atrix Development Team for this https://github.com/Atrix-Dev-Team.
VIDEO
I'm not 100% sure if/how I can embed a video, so here is a link to it!
http://www.youtube.com/watch?v=C5h4QuwVdao
I am now uploading a video of how-to install the ROM so you don't get stuck at the bootloader (big red M) or a bootloop.
LIST OF WHAT WORKS AND DOESN'T
WORKS:
It boots!
Wi-fi
Browser
live-backround
Contacts App
Clock App
Email
Settings/Spare Parts/Dev Tools
Music App (Opens but not tested with music yet)
DOESN'T WORK:
Cellular capibilities (Phone, Text, Cellular data) (Phone and Text messeging apps open though)
UNKNOWN:
Camera
Any other apps apart from the built-in ones. Going to flash GAPPS later to see if more apps work
This is not a complete list, if you find some that don't or do work, reply below
INSTRUCTIONS
Use fastboot to install Tenfar's CWM Recovery (link below)
Backup current ROM/Firmware
Download the zip, place it in a memorable location
Boot into Recovery (Hold the volume key down while booting, use the down volume key to scroll, use the up volume key to select the Android Recovery
Using volume keys to scroll, goto install zip from SD card
Choose it with the power button
Choose the appropriate option
Find where you placed the zip
Install the zip
Go back out to the main menu
Choose factory restore
Then when that is done, goto Advanced -> Wipe Dalvik Cache
Reboot and happy sailing
Watch the video once it gets posted to see a visual of that list.
DOWNLOAD
DISCLAIMER:
I am not responsible for anything that you do to your atrix. This is a developmental snapshot/alpha build. It also may not be up-to-date with the newest code. I will try to update as much as possibel
Please keep this link on this thread and not anywhere else. Please PM me if you would like to post it somewhere else.
Be sure to use Tenfars recovery http://forum.xda-developers.com/showthread.php?t=1138541 to flash this, as well as wiping /data, /cache and the dalvik cache or you may boot-loop!http://bit.ly/mWMjqy
Dude you are the man
Sent from my MB860 using XDA App
Anyone try this?
Sent from my MB860 using XDA Premium App
Wow! Cool! , and I think this should go in the development forum
Sent from my MB860 using XDA App
i'd flash this but since the cellular radio is still not supported i cant =(( good to kno tho it is running =)
Surely there is something wrong here?I would sooner wait on the version thatt all the peoples from this forum approved.I know this maybe near same but im sure it aint yet released for a reason...
I just tried it out, it hangs at the moto logo with the unlocked sign on the top left
Sent from my MB860 using XDA App
neer2005 said:
I just tried it out, it hangs at the moto logo with the unlocked sign on the top left
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Make sure you do a couple of things, use TENFARS CWM recoveryhttp://forum.xda-developers.com/showthread.php?t=1138541, do a factory reset and wipe the dalvik cache.
I am now uploading a how-to install video. Give it 30 m or so...
Tylerjd said:
Make sure you do a couple of things, use TENFARS CWM recoveryhttp://forum.xda-developers.com/showthread.php?t=1138541, do a factory reset and wipe the dalvik cache.
I am now uploading a how-to install video. Give it 30 m or so...
Click to expand...
Click to collapse
Maybe it's just the bug in rom managers recovery that doesn't wipe correctly, what about if you do the fastboot command to wipe?
Sent from my MB860 using XDA App
Javi97100 said:
Maybe it's just the bug in rom managers recovery that doesn't wipe correctly, what about if you do the fastboot command to wipe?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I dunno. It might work. But as I said before, I have found that you need to use Tenfar's ClockWork Mod Recovery to flash this. I tried it with the one that comes with ROM Manager, and it didn't work. If you are going to try to wipe with fastboot, also try putting tenfar's CWM on, and then re-flash.
Yeah ill confirm tomorrow after using tenfars
Sent from my MB860 using XDA App
Could you add list of what works and what doesn't in fisrt post
And which camera app installed in this rom (hope it's Droid3 cam)
Jack Krauser said:
Could you add list of what works and what doesn't in fisrt post
And which camera app installed in this rom (hope it's Droid3 cam)
Click to expand...
Click to collapse
I will go and add that list now.
And the camera app is the default android camera app-the one that you would find on the AOSP ROM's and such.
Working for me Used tenfars, wiped everyhing thanks!!!
Is there anyway to get tenfar's CWM as a .zip so I can flash it from ROM Manager?
Sent from my MB860 using XDA App
Hey guys ran across this post and thought maybe I could help.
Follow this link and refer to post number 3.
- http://androidforums.com/htc-inspire-4g/276917-inspire-4g-apn-settings.html
- manually enter the apn settings.
Go to settings/ wireless & network/ mobile networks/ access point names/
Once there click menu key. Then new APN.
Please let me know if this helps.
neer2005 said:
Is there anyway to get tenfar's CWM as a .zip so I can flash it from ROM Manager?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/attachment.php?attachmentid=641508&d=1309404399
davvid420 said:
Hey guys ran across this post and thought maybe I could help.
Follow this link and refer to post number 3.
- http://androidforums.com/htc-inspire-4g/276917-inspire-4g-apn-settings.html
- manually enter the apn settings.
Go to settings/ wireless & network/ mobile networks/ access point names/
Once there click menu key. Then new APN.
Please let me know if this helps.
Click to expand...
Click to collapse
Hey bro, thanks, but its a known issue for the atrix cm7 dev team...i beleive theyre working on ril at the moment!!
bsutton said:
Try this http://forum.xda-developers.com/attachment.php?attachmentid=641508&d=1309404399
Click to expand...
Click to collapse
Yes you gave him a zip of Tenfars, but I dont think that zip can be flashed using CWM
I don't think there is a zip out there that can do that... Sorry bro.
Tylerjd said:
Yes you gave him a zip of Tenfars, but I dont think that zip can be flashed using CWM
I don't think there is a zip out there that can do that... Sorry bro.
Click to expand...
Click to collapse
Oh. i just realized that;p sorry

[Recovery]TWRP 2.0 - Touch based GUI

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've been waiting for this new recovery to come out ever since I got my Kindle Fire(we're a bit limited with only 1 physical button). This was just released a few minutes ago, but it's been in development for a year or so.
I have no affiliation with the team, but I thought others would be interested in trying this out. Luckily, the Atrix was included in the initial wave of supported devices. More pics below.
Video of it in action on a tablet. It really shows the potential for an XML-based recovery. Could mean some very nice ROM installs among other things.
TWRP 2.0 for Motorola Atrix 4G
TWRP 2.0 General Info
Themers, keep your eye on this page. Atrix is not listed, yet.
Install instructions with fastboot:
1. Place twrp-olympus-2.0.0RC0.img in fastboot folder.
2. Open command prompt and cd to directory from step 1
3. Put phone in fastboot mode and connect to computer.
4. fastboot devices
5. fastboot erase recovery
6. fastboot flash recovery twrp-olympus-2.0.0RC0.img
7. fastboot reboot
Note to CM7 users: It doesn't look like the internal storage naming (/emmc) used by CM7 is supported yet, so you will be limited to just using /sdcard.
*Edit*
Looks like there's an official thread over in development now.
This should go in development. But glad to see this recovery on atrix
Sent from my MB860 using XDA App
Javi97100 said:
This should go in development. But glad to see this recovery on atrix
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Sorry, I wasn't sure if I should post it there since I wasn't the one to develop it. Mods, please feel free to move. Thanks.
Just flashed to my CM7 atrix, and tried flashing a .zip (radio update) and seemed to work just fine! Touchscreen recovery, the way it should be!
Just flashed it to mine, and I have to say its quite impressive. Methinks my volume buttons are going to see a lot less wear on them now.
Only issue is that it doesnt look like you can backup/restore your PDS partition, but thats not something you need to mess with often so you could probably just flash another recovery temporarily if needed.
Jotokun said:
Just flashed it to mine, and I have to say its quite impressive. Methinks my volume buttons are going to see a lot less wear on them now.
Only issue is that it doesnt look like you can backup/restore your PDS partition, but thats not something you need to mess with often so you could probably just flash another recovery temporarily if needed.
Click to expand...
Click to collapse
I'm jealous! I can't flash it yet cuz I'm not at home.
The development has been pretty quick on this. I'm sure if it's not in there currently, it will be at some point.
I flashed it but couldn't install anything it gave me errors saying it couldn't read the SD cards and I couldn't see any of my files.
Sent from my MB860 using Tapatalk
Phalanx7621 said:
I flashed it but couldn't install anything it gave me errors saying it couldn't read the SD cards and I couldn't see any of my files.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
What ROM are you on currently? I'm on CM7 so I'm wondering if sdcard naming might be an issue for non-blur roms. I just wanted to prepare myself for possible issues once I get it flashed.
ghost_og said:
What ROM are you on currently? I'm on CM7 so I'm wondering if sdcard naming might be an issue for non-blur roms. I just wanted to prepare myself for possible issues once I get it flashed.
Click to expand...
Click to collapse
I'm on cm7 as well. I'm thinking the problem lies in the previous recovery image I had, I was using cwm prior to flashing this. Wonder if I wiped recovery in fastboot prior to flashing the new recovery if that'd fix it.
Sent from my MB860 using Tapatalk
I am using CM7 Weekly 3, and i switched from RomRacers recovery. I used the fastboot erase recovery prior to flashing this, and it doesnt seem to have any problems in the limited testing I have done with it. In the log at the bottom of the screen it says error mounting sd-ext but it is able to flash .zip files from it, so...
Will try again tomorrow. I gotta hit the sack. Amazing job tho by the devs on this. Truly revolutionary work. Night all.
Sent from my MB860 using Tapatalk
Is it at all possible to make it into a flashable zip? I won't be at a PC that can fast boot for some time.
Sent from my MB860 using Tapatalk
Really cool! Thanks Devs!
d11dog11 said:
Is it at all possible to make it into a flashable zip? I won't be at a PC that can fast boot for some time.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
+1 for flashable.zip
Sent from my MB860 using xda premium
1+ flashable zip and if you ever mess up your pds. Partion like I did your going to with like hell ya had advanced restore compatability
sent from blue themed tapatalk
Please let me know if this works
d11dog11 said:
Is it at all possible to make it into a flashable zip? I won't be at a PC that can fast boot for some time.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Ok, this is the first CWM zip I've ever tried putting together so please let me know if you have any problems. I took an existing .zip and edited the updater script. I just tried it coming from romracer's CWM, and it worked for me.
If it works for others I will add it to the OP. Happy flashing!
*Edit*
Btw, when using TWRP I tried to reboot into bootloader but it seemed to put me in fastboot mode. Just wanted to put that out there in case others get stuck on "Unlocked" screen.
I can't get this to work so frustrating. I flash with fastboot, it boots into recovery. Its a great touch screen interface. But there are no files populating. I can click the bottom middle button and see a bunch or errors about being able to mount my SD card and such. What step am I missing here.
Sent from my MB860 using Tapatalk
Phalanx7621 said:
I can't get this to work so frustrating. I flash with fastboot, it boots into recovery. Its a great touch screen interface. But there are no files populating. I can click the bottom middle button and see a bunch or errors about being able to mount my SD card and such. What step am I missing here.
Click to expand...
Click to collapse
So when you tap on "Install" it doesn't take you to the root of your external sdcard? For me, that is the only directory I have access to at the moment since I'm on CM7. All of the actions are defaulting to /sdcard.
What boxes are checked for you when you go into "Mount"? I was unable to check sdcard-ext from there, but everything else was selectable.
Javi97100 said:
This should go in development.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
no it should not
Only boxes checked for mount are cache. I can't mount sd card or anything else. When I click install it takes me to the main / root folder. I can go to whatever folder I want but nothing shows up.
Sent from my MB860 using Tapatalk

Semi-Bricked, tried everything. Need help.

Hi all, I have searched and followed all the guides I could search here and still not able to recover my semi-bricked G2.
It happens when I was trying to downgrade it and temp-root/root. The semi-brick took place at the first time rebooting after all the procedure.
I was putting a DZ hboot img file onto it as I have planned to get a rom with HTC sense.
Here is how it looks now:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It has android 2.2 on it with Kernel version: 2.6.32.17-g9ab3677, [email protected] #1 when I received it.
Please show me some light.
Thank you.
it won't boot because you changed the system partition, your old rom will just booloop
boot into recovery, wipe all, flash rom of choice, reboot
your done!
Sent from my HTC Vision using xda premium
demkantor said:
it won't boot because you changed the system partition, your old rom will just booloop
boot into recovery, wipe all, flash rom of choice, reboot
your done!
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Thanks for the advice.
I did try to boot into recovery from the above screen but it stays in the white HTC screen forever and does nothing.
Is there some files that I will need to put into my SD card to do this recovery step?
I would get a stock rom or RUU and stick it onto your SDcard. Whatever you try to flash must be call PC10IMG.zip.
Here's all the stock roms for this phone. Not sure if you can rename .exe files to .zip.
http://shipped-roms.com/index.php?category=android&model=Vision
Dukenukemx said:
I would get a stock rom or RUU and stick it onto your SDcard. Whatever you try to flash must be call PC10IMG.zip.
Here's all the stock roms for this phone. Not sure if you can rename .exe files to .zip.
http://shipped-roms.com/index.php?category=android&model=Vision
Click to expand...
Click to collapse
Thanks.
So after I have the stock rom file inside the SD card, I choose "Recover" from the above screen to load it up?
it looks like the recovery flash didn't work is all, before going about with the ruu try fastboot, if it let's you...
fastboot flash recovery recovery.img
works the same as you did with the adb commands.
get the recovery image in the same folder as fastboot.exe (probably sdk platform-tools) open a cmd there, have phone in fastboot mode and type
fastboot devices
in the cmd window, if you see yours then all is good and flash the recovery (oh and make sure the image is named recovery.img)
Sent from my HTC Vision using xda premium
demkantor said:
it looks like the recovery flash didn't work is all, before going about with the ruu try fastboot, if it let's you...
fastboot flash recovery recovery.img
works the same as you did with the adb commands.
get the recovery image in the same folder as fastboot.exe (probably sdk platform-tools) open a cmd there, have phone in fastboot mode and type
fastboot devices
in the cmd window, if you see yours then all is good and flash the recovery (oh and make sure the image is named recovery.img)
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Thanks, I will try this one first.
You have been very helpful and patient with me. Appreciated!
demkantor said:
it looks like the recovery flash didn't work is all, before going about with the ruu try fastboot, if it let's you...
fastboot flash recovery recovery.img
works the same as you did with the adb commands.
get the recovery image in the same folder as fastboot.exe (probably sdk platform-tools) open a cmd there, have phone in fastboot mode and type
fastboot devices
in the cmd window, if you see yours then all is good and flash the recovery (oh and make sure the image is named recovery.img)
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Ok, here is what I have now.
Then, on my phone, I pick "recovery" then power-button to choose it.
The screen then changed to the recovery loading screen. Then it reboot itself and go back to the white HTC screen and stuck there again.
Do you know what else I could try?
I have tested all the rom for Tmobile on that page and none of them work. All recovery process end up with the red triangle and exclamation mark on the screen but nothing else.:crying:
Is there anything I can try?
things are looking bad sorry to say but I do still think you have a chance
log on to freenode (there is a link in the xda vision wiki)
here you can get real time help
Sent from my HTC Vision using xda premium
desire z or g2
misbehave said:
I have tested all the rom for Tmobile on that page and none of them work. All recovery process end up with the red triangle and exclamation mark on the screen but nothing else.:crying:
Is there anything I can try?
Click to expand...
Click to collapse
Hi it took me w days to find out that you can select the options like
Recovery only with the. Qwery keyboard. Try shift for move the cursor and enter
For select item.
I hope this will help.
I think all of my problem was caused by a faulty micro-SD card. Turns out the micro SD-card I have been using was corrupted.
After I replaced it with a new card, everything is running ok and I am able to do a recovery.
Guess I will have to try everything from the start again.
Thanks for all the advice and helps guys!!!
So the recovery went smoothly after doing so with a new SD card and my G2 is now installed with Android version 2.3.4
-Baseband version: 12.52.60.25U_26.08.04.30_M3
-Kernel version: 2.6.35.10-g96de068
-Build Number: 2.15.531.3 CL82286 release-keys
What will be the correct guide to root+S-off for this system then?
use the xda wiki or the cyanogen one. if you can't find it just google "cyanogen root wiki htc g2" or "xda wiki root vision"
Sent from my HTC Vision using xda premium
demkantor said:
use the xda wiki or the cyanogen one. if you can't find it just google "cyanogen root wiki htc g2" or "xda wiki root vision"
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Thanks! Yeah, that's why one I've just used.
I think my G2 now has perm-root and S-off.
Now trying to find a good rom with Sense on it.
misbehave said:
So the recovery went smoothly after doing so with a new SD card and my G2 is now installed with Android version 2.3.4
-Baseband version: 12.52.60.25U_26.08.04.30_M3
-Kernel version: 2.6.35.10-g96de068
-Build Number: 2.15.531.3 CL82286 release-keys
What will be the correct guide to root+S-off for this system then?
Click to expand...
Click to collapse
the guide to do that with the "adb" is simply GREAT.
most sense roms are unbarably slow to me so my only suggestion is to try an earlier "lite" sense rom. but ever user has his/her own taste so flash away...
Sent from my HTC Vision using xda premium
demkantor said:
most sense roms are unbarably slow to me so my only suggestion is to try an earlier "lite" sense rom. but ever user has his/her own taste so flash away...
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Thanks for the suggestion.
One more question though.
From this page here: http://shipped-roms.com/index.php?category=android&model=Vision
I see there are some stock Desire-Z roms from Hong Kong.
Let say if I have the Desire-Z hboot on my G2 and I flash my G2 with one of those HK Desire-Z roms, will I still be able to use T-Mobile 3G radio band on my G2? Or will my flashed G2 will then be only able to use those radio bands for the Asia market only?
well you should be ok, but you will have to pull out the radio and recovery and hboot out of those pc10.imgs
I would suggest to stay away from any stock roms for now, go to the development thread here in the g2 forum and look for the 3rd or 4th sticky, should be a compalation of most of the newer roms for the vision, here you will find them catogorized for ease if you want to try a bunch of sense roms they're all right there
happy flashing!
Sent from my HTC Vision using xda premium
demkantor said:
most sense roms are unbarably slow to me so my only suggestion is to try an earlier "lite" sense rom. but ever user has his/her own taste so flash away...
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
demkantor said:
well you should be ok, but you will have to pull out the radio and recovery and hboot out of those pc10.imgs
I would suggest to stay away from any stock roms for now, go to the development thread here in the g2 forum and look for the 3rd or 4th sticky, should be a compalation of most of the newer roms for the vision, here you will find them catogorized for ease if you want to try a bunch of sense roms they're all right there
happy flashing!
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Oh, I was looking for stock Desire-Z rom because custom roms don't have that HTC-Location app that the stock rom has.
I have been using (and paid) that app for offline driving navigation and like it a lot.
Not sure if any 3rd party custom roms will still have that app.

[ROM]U8800-51 Gingerbread Update Tutorial AM labs with 3g

This is a modified stock gingerbread rom for the u8800-51
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions are simple:
1. Make an imei backup using 5iromtoolbox.See Attachment.
2. Make a total backup using Roadkil's disk image(must be in pinkscreen to make backup). If there is an error, POST it.
2b. Follow this guide to flash old gingerbreadhttp://forum.xda-developers.com/showthread.php?t=1698308.
3. Wipe Battery Stats/cache/dalvik cache in cwm
4.Install it using unofficial cwm 5.5.0.4.
5. Reboot system and enjoy.
6. If there is a problem than revert it to stock 2.2 via disk image and start over again.
Download link: Dropbox
Cm7 can be flashed over it.
Original links: (In Spanish)
http://androidmovida.com/2012/05/que-es-el-codigo-imei-y-como-cuidarlo/#axzz2485PMS8m
http://androidmovida.com/2012/07/ginger-movidav1/#more-7364
Tested yourself?
Sent from my locked MB865 on Ice Cream Sandwich.
Yes, these are my pics
Sent from my U8800-51 using xda premium
3G/HSPA+ working?
Sent from my locked MB865 on Ice Cream Sandwich.
Yes, to be safe, back uP imei
Sent from my U8800-51 using xda premium
Somcom3X said:
Yes, to be safe, back uP imei
Sent from my U8800-51 using xda premium
Click to expand...
Click to collapse
You have att model? Sorry for hesitating but the phone is my mom's so I can't have something buggy. If it was for me I would be flashing all the Roms lol
Sent from my locked MB865 on Ice Cream Sandwich.
make a backup using disk image and 5imei toolbox and try it.
It removes att bloatware. Yes its att
Sent from my U8800-51 using xda premium
Hi all, as far as the ROM threads are clearly marked for a u8800-51 the threads are OK in this section. Now back on topic please.
Looks great! I'm about to try. Thank you!
john9 said:
Looks great! I'm about to try. Thank you!
Click to expand...
Click to collapse
How is it?
Sent from my locked MB865 on Ice Cream Sandwich.
I've tried to install this ROM many times and failed it seems. I've backed everything up (just in case it didn't work), ran a factory reset, wiped battery stats dalvik cache and formatted /system, then proceeded to install this. I used the CWM you stated in the post and tried a few other versions. Phone is just stuck on the boot screen, and keeps resetting. =/
hitaxas said:
I've tried to install this ROM many times and failed it seems. I've backed everything up (just in case it didn't work), ran a factory reset, wiped battery stats dalvik cache and formatted /system, then proceeded to install this. I used the CWM you stated in the post and tried a few other versions. Phone is just stuck on the boot screen, and keeps resetting. =/
Click to expand...
Click to collapse
What model is it?
Sent from my U8800-51 using xda premium
The AT&T Impulse 4G (u8800-51). I did however, get the CM7 mod to work after installing on top of this rom. Only issue is I cannot seem to add my google account to it, and the cyanogenmod settings in the settings menu does not work (force close).
I never tested cm. Go back to 2.2 and flash this one
Sent from my U8800-51 using xda premium
I'll try it again, but how long should I wait during the boot screen resetting? I waited almost an hour the last few times I tried to install.
hitaxas said:
I'll try it again, but how long should I wait during the boot screen resetting? I waited almost an hour the last few times I tried to install.
Click to expand...
Click to collapse
Open the zip on a computer and move the stock files, being the same as yours, back to phone on pink screen
Sent from my U8800-51 using xda premium
hitaxas said:
I'll try it again, but how long should I wait during the boot screen resetting? I waited almost an hour the last few times I tried to install.
Click to expand...
Click to collapse
Did you wipe data?
Sent from my U8800-51 using xda premium
hitaxas said:
I've backed everything up (just in case it didn't work), ran a factory reset, wiped battery stats dalvik cache and formatted /system, then proceeded to install this. I used the CWM you stated in the post and tried a few other versions. Phone is just stuck on the boot screen, and keeps resetting. =/
Click to expand...
Click to collapse
I tried everything I said in this post.
hitaxas said:
I tried everything I said in this post.
Click to expand...
Click to collapse
Try the original workaround. This is an older version than this ROM. http://forum.xda-developers.com/showthread.php?t=1698308
When I try to restore my IMEI, 5irom says there's no backup. Imeibackup folder is there and there are two files, 10 and 11.

Categories

Resources