My HTC Elf is stucked on message Smart Mobility and closing in 20-30 seconds after starting the device. Anyone can advice me something about this? Thanks.
do you tried unlocking your phone's cid by spl if yes what is your version for spl and ipl
nauriceprivat said:
My HTC Elf is stucked on message Smart Mobility and closing in 20-30 seconds after starting the device. Anyone can advice me something about this? Thanks.
Click to expand...
Click to collapse
this is what we call "Bricked".
Causes:
1.
Flashing custom/cooked ROM to ur PDA without HardSPL enabled (security unlock that enable PDA to accept non native ROM files)
2.
you might have accidentally flash a wrong ROM files. (extreme e.g. you flash your HTC Elf with HTC Leo ROM) you should search your Elf ROM only in this HTC Elf sub-forums.
If you got this one of the problems
Solves:
1.
quick solving: go to HTC support website, and grab your ROM files. here's the link for HTC Touch. you know what to do here
2.
by HSPL your phone and then re-flash with any ROM.
how to HSPL? you should read this thread
after you successfully HSPL your PDA, you can search the ROMs that suits you best.
for good stability and performance, i would recommend you Onyx
More how-tos read here
Related
Since then voila I install a rom for the first time I have a bug here is a picture to help you understand
It is an image that I have requests in the forum but am in all its images
More information please!
We need more information!
Are you using SPL or USPL?
What ROM did you flash?
Did you perform a hard reset after flashing the ROM?
If you're not sure about the above then read this for SPL:
http://forum.xda-developers.com/showthread.php?t=431217
This for USPL:
http://forum.xda-developers.com/showthread.php?t=462347
And this is an all round overview:
http://forum.xda-developers.com/showthread.php?t=505377
G
Edit: And this post makes me a senior member - woohoo!
Here is how I do I install rom always full of the same problem
Olinex I install 1.56 and then the official 1.56 rom 2009
The picture you supply isn't from the official 1.56 HTC ROM because it is running Windows mobile 6.5 (I can tell from the user interface). The official ROM uses Windows Mobile 6.1.
I think you need to make sure that you flashed the correct ROM and then flash the device again. After doing this make sure you hard reset afterwards at least once, preferably twice by holding down both volume buttons while powering the device on.
Also unless you have a CID locked phone that is branded eg. Orange, you shouldn't have to use Olinex HSPL and can download the official ROM from here:
http://www.htc.com/uk/SupportDownload.aspx?p_id=179&cat=2&dl_id=533
In any case you should confirm which SPL you have by holding down the lower volume button while booting (it will tell you either SPL or HSPL along with version number).
Let us know how you get on...
G
HSPL 156 OliNex and htc is a factory not orange or other
Okay, it sounds like you have successfully installed HSPL, but now you need to try flashing the ROM again (it appears to be the ROM that is causing the graphic corruption in your picture).
Make sure you perform two hard resets after flashing and hopefully this should solve your problem...
Cheers,
G
P.S. Make sure you back everything up prior to re-flashing as you will lose everything in phone memory (SD card should not be affected, but my advise would be to remove it anyway until you have re-flashed).
Hi !
My P4350 got stuck in the bootloader when I stied to flash a new ROM
Active sync doesn't recognize the P4350 anymore....
IPL 5.04.0002
SPL 4.10.0000
What should I do now ????
search for bootloader... there are so much threads with the same question
Did it fail during the flashing process? Do you see an error message on the bootloader screen? ActiveSync won't recognize the device unless it is booted up in Windows Mobile. If you can still get into the bootloader reflash the ROM from there. You don't have to flash ROM's connected via ActiveSync; you can do it from the bootloader as well.
It did fail during an flash !!
The only thing on the tri colour screen: is: IPL 5.04.0002 and SPL 4.10.0000
When I try to flash a new rom it gives errors, it starts for 2 seconds and than it stops with an error. (on several occasions different errors ==> one error at the time).
Post some of the error codes you get. Have you tried flashing a different ROM? You may need need to use MTTY if you get a ROM upgrade code message in the bootloader itself.
Ehhhhhhh what is: MTTY if you get a ROM upgrade code message in the bootloader itself.
I have NO idea what you mean.
I had before an TyTN and that was no problem ever (until it died..)
Miep Miep Zoeffff said:
Ehhhhhhh what is: MTTY if you get a ROM upgrade code message in the bootloader itself.
I have NO idea what you mean.
I had before an TyTN and that was no problem ever (until it died..)
Click to expand...
Click to collapse
Is ur device CID unlocked(HardSPLed)?
Miep Miep Zoeffff said:
It did fail during an flash !!
The only thing on the tri colour screen: is: IPL 5.04.0002 and SPL 4.10.0000
...
Click to expand...
Click to collapse
I'm a retard. You don't have HSPL flashed to your device. This is why it keeps failing when you try to flash a ROM. The HTC SPL on your device is blocking you from flashing unsigned (custom) or CID-mismatching ROM's to your device. All you should need to do is flash HSPL and then your custom ROM. Read the Wiki for this device if you need more information.
My phone was provided by Vodafone.
I have now Telfort.
I flashed Vodafone to Canonyang.
Then I tried to put the Dutch back on it and then it got stuck in the Bootloader.
Wasn't it hard SPL than??
Digital Outcast said:
I'm a retard. You don't have HSPL flashed to your device. This is why it keeps failing when you try to flash a ROM. The HTC SPL on your device is blocking you from flashing unsigned (custom) or CID-mismatching ROM's to your device. All you should need to do is flash HSPL and then your custom ROM. Read the Wiki for this device if you need more information.
Click to expand...
Click to collapse
I've tried 2 different HSPL now.
It goes well, even says 100 % on phone AND computer but than it gives error 270 'update error'
What now...
Have you followed this? I know it works for me...
I've seen it, but where do I have to intall the 3 cab files?
Do I have to install them on the microSD card?
Do I have to put them like this .cab or do I need them to unpack them??
please help!
Copy them to your phone, install all three on your phone's memory.
ehhhhhhhhhhhhhhhhh How should I do that ??
Oh right. I'm retarded. You're stuck in the bootloader... Sorry just reading too many threads and getting confused. Have you tried searching for "bootloader" or "Goldcard" in the ROM development forums? There are tons of explanations on how to recover from being stuck in the bootloader.
i have rogers htc touch, after trying unlocking using ELF USPL , when i power on only see HTC Logo and then it goes off, i try loading new rom but still same problem . Please help
What is your IPL and SPL?
IPL is 2.21.0002
and
SPL 1.11.0000
I had the same problem...took me 3 hours to figure it out..
1. on Bootloader, re-install a ROM that works (go back to WM6 or WM6.1)
2. when it working, install USLP 1.11
3. DO NOT RESET AFTER...
4. install USLP 3.14
5. then you can install any WM6.5 ROM
For some reasons, the Rogers Touch has some difficulties to upgrade directly, even if it's unlocked...
Good luck
Michel
michel-2000 said:
I had the same problem...took me 3 hours to figure it out..
1. on Bootloader, re-install a ROM that works (go back to WM6 or WM6.1)
2. when it working, install USLP 1.11
3. DO NOT RESET AFTER...
4. install USLP 3.14
5. then you can install any WM6.5 ROM
For some reasons, the Rogers Touch has some difficulties to upgrade directly, even if it's unlocked...
Good luck
Michel
Click to expand...
Click to collapse
Thats a great tip to the community, I will refer back to your guide if I met with anyone with troubles using Rogers.
...thanks...
But, after reading a lot yesterday, seems that the USLP 3.14 is a ''battery eater''...
I'm testing it now..I will see in a couple of days if it is the case!
So far, it looks like it's using approx 2% of the battery per hour...
Definitely, you should always use 3.10.
I had a bad experience with 3.14, it takes up half of my battery after 5 hours of almost no usage.
i'm confused. .... i also have a rogers htc touch as well and i want to flash a custom rom onto it.
(my IPL: 2.21.0002 and SPL: 2.21.0000)
First, i know it has to be CID unlocked... using >> Elf 1.11 USPL ?
Can i use HARDspl ?? What is the difference between USPL and Hard uspl ??
Because i read something about ..... " HardSPL : This modified bootloader allows a much safer flashing process to take place since it reduces the chance of permenently bricking your device. It also removes the need to CID Unlock the device since it ALWAYS reports SuperCID when flashing. "
After a CID unlock and soft reset, the phone will reboot into the old ROM (Rogers, in my case) if i have not began flashing a new rom ??
Some advice please... thanks!
Use the guide written on 4th post.
Its located on this thread
Cheers.
hello, I need aid to install a ROM for this HTC Touch GSM, I have a HTC Kaiser 8925 I have installed many roms for Windows mobile 6,1 and 6,5 for this model and work to me very well. but for this HTC Touch I have problem, when I ignite appears a screen tricolor .....
I believe that this unblocked 1. that programs use to unblock I do not have to install new the ROM.
in the screen tricolor you appear this..
IPL 2.24.0002
SPL 2.28.0000
el model is HTC Touch Gsm Elf0101
a tutorial exists or they can help me step by step to intalar new roms, first I must unblock it. I wait for its quick one replaced… thanks eduard
Hi
First try to reset or to hard reset to get out of the bootloader (tricolor) and return to normal. If not read this http://forum.xda-developers.com/showthread.php?t=347700
Hello,
im Having an issue with a Touch2 Mega
It boots.. and after the HTC logo it says "windows mobile" and the orange screen and Bham! it restarts..!
i have tried flashing stock roms but they didnt help.. same issue
i cant install custom roms cause the phone is SPL not HSPL
i cant install HardSPL.. it doesnt let me install through bootloader..
Kindly Help me!!!!
thanks!
Dragg3r said:
Hello,
im Having an issue with a Touch2 Mega
It boots.. and after the HTC logo it says "windows mobile" and the orange screen and Bham! it restarts..!
i have tried flashing stock roms but they didnt help.. same issue
i cant install custom roms cause the phone is SPL not HSPL
i cant install HardSPL.. it doesnt let me install through bootloader..
Kindly Help me!!!!
thanks!
Click to expand...
Click to collapse
Maybe you can go back through the reconstructed ROM, this guide to perform http://forum.xda-developers.com/showpost.php?p=6195121&postcount=1
@hakim
brother, the reconstructed rom process requires the phone to have HardSPL installed
All what you need:
* Original ROM (here)
* Custom Rom Flasher (RUU)
* HARDSPL (here)
* Dumped Rom (read below Step 1)
* Folder with programs (attached zip "_FilesNeeded_czdjj.zip")
And like i said before.. i cant HARDSPL my phone.. it just doesnt go beyond 0%..
ANYONE?!?!!?
Dragg3r said:
ANYONE?!?!!?
Click to expand...
Click to collapse
Were you able to fix your phone. If yes, please tell me the solution. I am having same problem with my phone.
Regards,
Danish