Related
Unable to load American Android 2.3 on HTC HD2.
Downloaded the American Android 2.3 for TMOUS->Extracted Android folder to blank SD card /sdcard/Android->Opened up file manager on HTC HD2 /sdcard/Android and ran clrcad.exe got the untrusted popup clicked okay->Ran haret.exe got popup again clicked okay then saw a few white command lines (maybe 5) then the green HTC logo appears and sits there for ever. I let it sit for 30 min and no change had to pull the battery and restart windows. Phone is up to date only difference might be is it has been unlocked through T-Mobile. Does anyone know how to avoid this?
Ergh
I even tried HSPL3 and that didn't help... I just want the American Android 2.3 Gingerbread to load on my HTC HD2.. WTF!
Im having the same problem as well. I did the fat32 primary partition, on a clean sd card, ill wait for 30 minutes before i give up. some one please help, i got the desire hd rom running but would like to see what the gingerbread 2.3.3 is like.
Did you flash a new radio rom?
SO, you are going from WIn 6.5 to Android just by haret ? You cannot
If I was you I would start all over flashing HSPL 3, then flash Radio 2.15, then install Magldr 1.3, then copy the zip file to sd card and install. It's as easy as drinking a glass of water.
Be sure you chose SPL 2.08.HSPL and NOT SPL 2.80 when you flash HSPL 3
valv507 said:
SO, you are going from WIn 6.5 to Android just by haret ? You cannot
If I was you I would start all over flashing HSPL 3, then flash Radio 2.15, then install Magldr 1.3, then copy the zip file to sd card and install. It's as easy as drinking a glass of water.
Be sure you chose SPL 2.08.HSPL and NOT SPL 2.80 when you flash HSPL 3
Click to expand...
Click to collapse
So I did all that and am now stuck on the MAGLDR screen and can't get it to do anything.
I tried running ROMUpdateUtility and it won't connect...
same problem need fiv
valv507 said:
SO, you are going from WIn 6.5 to Android just by haret ? You cannot
If I was you I would start all over flashing HSPL 3, then flash Radio 2.15, then install Magldr 1.3, then copy the zip file to sd card and install. It's as easy as drinking a glass of water.
Be sure you chose SPL 2.08.HSPL and NOT SPL 2.80 when you flash HSPL 3
Click to expand...
Click to collapse
Ok first off what valv507 is mistakenly thinking you are trying to run Andriod from NAND. When you flashed MAGLDR you wiped your ROM from your HD2. This is why you can not get past MAGLDR it needs a ROM to boot.
You will have to reinstall your Windows Mobile ROM (hope you dide not loose too much data ) make sure it is a 3.14 ROM as they are the best for running Android from SD. Also make sure you have the 2.15.50.14 radio or atleast the 2.14.50.02 radio, the 2.15.50.14 radio is the best though. Also reformat your SD card again but use the Panisonic software to format it as most people say it is better than the Windows software. You can download it here. Make sure you do a full wipe and format using Fat 32. Then place all of your files and stuff from your back up back on your SD card including your Adroid build. then try to boot the Android again.
Put your HD2 into bootloader to reflash your Win Mo ROM. Hold down the volume down button while powering on your HD2 to get to bootloader and make sure you see USB in the white bar of bootloader before you flash the ROM.
T-Macgnolia said:
Ok first off what valv507 is mistakenly thinking you are trying to run Andriod from NAND. When you flashed MAGLDR you wiped your ROM from your HD2. This is why you can not get past MAGLDR it needs a ROM to boot.
You will have to reinstall your Windows Mobile ROM (hope you dide not loose too much data ) make sure it is a 3.14 ROM as they are the best for running Android from SD. Also make sure you have the 2.15.50.14 radio or atleast the 2.14.50.02 radio, the 2.15.50.14 radio is the best though. Also reformat your SD card again but use the Panisonic software to format it as most people say it is better than the Windows software. You can download it here. Make sure you do a full wipe and format using Fat 32. Then place all of your files and stuff from your back up back on your SD card including your Adroid build. then try to boot the Android again.
Put your HD2 into bootloader to reflash your Win Mo ROM. Hold down the volume down button while powering on your HD2 to get to bootloader and make sure you see USB in the white bar of bootloader before you flash the ROM.
Click to expand...
Click to collapse
What if I just want to run Android from NAND? At this point I just want to flash Gingerbread 2.3 on there but want the best version of that with the fewest bugs. Do you have any links to such a ROM? How would I go about flashing it? Thank you for the help in advance.
If you do a YouTube search you cab find a "how to install " video for installing NAND Android GB 2.3.2 on the HD2, it also has links to ROMs, Radios and MAGLDR 1.13. I installed it in about 15 mins after d/ling the specified files and I have only had a HD2 for 3 days. Very good video. I would link you to it but I am at work right now and I have the page saved to face on my home PC
Sent from my HTC HD2 using XDA App
sh1fty7 said:
What if I just want to run Android from NAND? At this point I just want to flash Gingerbread 2.3 on there but want the best version of that with the fewest bugs. Do you have any links to such a ROM? How would I go about flashing it? Thank you for the help in advance.
Click to expand...
Click to collapse
If you want to go NAND Android just click on thr guide linked in my signature. I have links to two of the best guides on how to install NAND Android on your HD2 at the top of my guide. My guide is not a guide on how to install NAND Android but a guide to teach you what the things you need to install and run Android from NANN and WP7 are, what they do, and how to install them.
Also I use a non HTC Sense Gingerbread ROM and I really like it click the link for Hyperdroid in my signature if you want to check it out.
Thanks! let me learn this knowledge may.
ryu-lamp said:
Thanks! let me learn this knowledge may.
Click to expand...
Click to collapse
What exactly are you asking here? Do youi want to know how to enter bootloader?
If so you just hold your volume down button down while powering on your HD2, this brings up the multicolor bootloader screen. From bootloader you can connect your HD2 to your computer wait for Serial to change to USB and then flash what ever you are wanting to flash radio, Windows Mobile ROM, splash screen, MAGLDR, and cLK. Click on my guide in my signature to get even more knowledge.
it is possilbe to have magldr installed running whatever NAND os you want.. and still boot ACA from sdcard.
the first post of the ACA thread has all the details you need to accomplish this.
sh1fty7 said:
What if I just want to run Android from NAND? At this point I just want to flash Gingerbread 2.3 on there but want the best version of that with the fewest bugs. Do you have any links to such a ROM? How would I go about flashing it? Thank you for the help in advance.
Click to expand...
Click to collapse
to run it from nand you go to 10 services, than boot settings ,than select android sd ,than go to 10 again than select boot settings ad sd dir than select the android folder make sure there is not another folder named android, than go to ad sd nand and it will load. it tooked 15 minutes but he did say it would take long.
I took the same steps as the OP did and I'm experiencing the same problem. I am not planning to go through NAND and would like to stick with the SD build but it will not load. Any suggestions?
I'm using the latest American android build. Here is what I did:
1. Copy ENTIRE android folder to sd. If you want a faster boot time you need to copy over a new data image since one is not included in this build. It will create one on first boot, but this takes longer.
2. Once you've done this run clrcad then haret and allow it to boot. Mine took about 15 min total boot time to first lock screen without a data img. And about 7 to 10 min with.
3. Once you see the first screen DO NOT touch it. Let it settle for about 10 min. After that it should shut it self down.
4. Turn phone back on and boot android again. Letting it settle again for a few minutes. After 5 or 10 min of letting it settle pick it up and enjoy your sexy gingerbread.
Also, on a side not magldr is used for booting from wp7 to android. Haret is what is used for booting android from wm6.5
Hope this helped.
kushXmaster said:
I'm using the latest American android build. Here is what I did:
1. Copy ENTIRE android folder to sd. If you want a faster boot time you need to copy over a new data image since one is not included in this build. It will create one on first boot, but this takes longer.
2. Once you've done this run clrcad then haret and allow it to boot. Mine took about 15 min total boot time to first lock screen without a data img. And about 7 to 10 min with.
3. Once you see the first screen DO NOT touch it. Let it settle for about 10 min. After that it should shut it self down.
4. Turn phone back on and boot android again. Letting it settle again for a few minutes. After 5 or 10 min of letting it settle pick it up and enjoy your sexy gingerbread.
Also, on a side not magldr is used for booting from wp7 to android. Haret is what is used for booting android from wm6.5
Hope this helped.
Click to expand...
Click to collapse
Ok, So maybe you can help me here... Im trying to get this Latest American Android 2.3.4 and my phone is totally stock right now.. I used to have froyo 2.2 but I Hard reset my phone and formatted my SD card, So the phone is totally fac setting right now. So can you please explain step by step on what to do now and how to get that 2.3.4. Do I have to install any sort of rom or something?
btw here's the thread where I found the build
http://forum.xda-developers.com/showthread.php?t=957652
Please reply quick because I am dying without Angry Birds lol!
Android
I have to post 10 post before I can post to another thread. 1
Hello again everyone, I recently purchased a used HTC hd2, it has android on it now with clockworkmod recovery app also, But I want to put CM7 on it, So I reboot....Hold down power....select number 8 for the recovery, and it says go go go......but does nothing, I have a slide 3g my touch as well, but I am not comfortable with this phone yet....2 questions....I want to install cm7....can someone link me the exact file I need?...I'll worry about diff roms and themes later.....AND...How do I get into recovery to flash this cm7 rom?...I have mgcldr 1.3 on the phone now, a 8 gig sd card...I want to install the apps to the sdcard as well.....I have searched all over the forums and google, but like I said, I am confused on this only cause it is so new to me, and a bit different than mt3g......Help?...Thanks so much for reading.......Larry
find a good CM rom, and there you will find all instructions, usually it tells you how to.
but you can always reflash magldr and then go by ROM flashing instructions to reflash CWM recovery.
If choosing 'ad recovery' stops at 'go go go', i'd first try it a couple more times. I've had recovery fail a time or two the exact same way, only to work fine the next time I tried it.
If it just won't go into cwm recovery after trying a few times, re-flash cwm recovery with the appropriate system partition size for the rom you intend to flash. Do this by hooking your phone up to your pc by the usb cable and choosing 'usb flasher' in the magldr menu and then flash the recovery image. There is a thread to find your cwm recovery image in the 'hd2 android nand development' forum. Each nand rom thread usually says in the first post what size recovery image is preferred for that particular rom.
The hd2 may seem a bit confusing coming from a native android device, but compared to the mt3gslide, it's pretty straightforward, what with the slide's s-off procedure and the old rooting methods (I rooted back before rooting the slide was super easy lol). Once you can load up cwm, you'll feel right at home, it's just like flashing your old slide from that point on.
Sent from my HTC HD2 using XDA App
dirtylarry10 said:
Hello again everyone, I recently purchased a used HTC hd2, it has android on it now with clockworkmod recovery app also, But I want to put CM7 on it, So I reboot....Hold down power....select number 8 for the recovery, and it says go go go......but does nothing, I have a slide 3g my touch as well, but I am not comfortable with this phone yet....2 questions....I want to install cm7....can someone link me the exact file I need?...I'll worry about diff roms and themes later.....AND...How do I get into recovery to flash this cm7 rom?...I have mgcldr 1.3 on the phone now, a 8 gig sd card...I want to install the apps to the sdcard as well.....I have searched all over the forums and google, but like I said, I am confused on this only cause it is so new to me, and a bit different than mt3g......Help?...Thanks so much for reading.......Larry
Click to expand...
Click to collapse
Hey
You may have a older version of CWM on your HD2. Go to option #2 Boot AD SD and see if that boots CWM If that works you are good but I do recommend going to the CWM threadcand downloading the newer version of CWM, just check the thread on your ROM to see what partion size you need with CWM. If it does not work you might have to flash the newer version anyway as the oder version required you to place two files for CWM on your SD card. The new CWM just flashes to NAND memory like a ROM would. You can either click on the link to CWM in my sig to go to the thread on CWM or you can click on my guide I wrote on MAGLDR and CWM that I have linked in my sig also. I Really recommended you read my guidecas you said you are new to the HD2. It will tell you exactly how to flash both versions new and old of CWM and all kinds of stuff that will help you out. All you need to do when downloading anew ROM is make sure you get the ROM download that says for MAGLDR or has MAGLDR in the file download link in the ROM thread. The ROM download links are usually in the first or secound post of the ROM thread. There are several CM7 based ROMs in the HD2 Android NAND Development forum. Just look for the Cyanogen 7 or CM7 in the thread title. Here is a link to the forum.
http://forum.xda-developers.com/forumdisplay.php?f=928
Thanks guys....SO I have the nand rom for 250Mb..(opr whatever its called), I then push to sd card, after unzipping the file....I then hit option 4 on phone, and run daf.exe...but I get this error
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Now I googled that and found people saying go to control panel...then active sync, and disable usb etc....but...What control panel?....and..I dont have active sync either......layman terms?....lol thanks guys...getting close....Larry
dirtylarry10 said:
Thanks guys....SO I have the nand rom for 250Mb..(opr whatever its called), I then push to sd card, after unzipping the file....I then hit option 4 on phone, and run daf.exe...but I get this error
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Now I googled that and found people saying go to control panel...then active sync, and disable usb etc....but...What control panel?....and..I dont have active sync either......layman terms?....lol thanks guys...getting close....Larry
Click to expand...
Click to collapse
Are you talking about flashing Clockwork Mod Recovery or A ROM?
it is something...
LOOK FOR FLASHING INSTRUCTIONS INSIDE YOUR ROM THREAD
Got it....the hard way...lol I did some extensive reading 101, and realized i needed to flash roms a diff way because of nand....lol.....after I reinstalled mgcldr ....thanks guys......Now....to find some awesome nand roms that will help me save the damn battery life......what a hog this is, but I am loving it bigtime.....Dirty
hi guys. I wanted to ask how i can run dual boot on my hd2 t mobile (windows mobile and android...) What should i do...?
Well,this was really one of the most frequently asked questions and there have been many tutorials so far.You could have done a bit of research before asking the question. But no worries, since you are asking, i will just post the links for the step by step tutorial.
1) For HSPL:
http://forum.xda-developers.com/showthread.php?t=653614
Follow the steps. Only steps 1-3 will apply for you. Step 3 is optional,unless you want to flash a custom WM ROM.
2) For Radio:
http://forum.xda-developers.com/showthread.php?t=611787
Download Leo_RADIO_2.15.50.14**. If you want to download a lower radio, ensure that it is a .50 version(x.xx.50.xx....).
3) For Android build:
http://forum.xda-developers.com/forumdisplay.php?f=735
Download any Android build you want. I am using AmeriCan Android(http://forum.xda-developers.com/showthread.php?t=957652). After extracting,copy the Android Folder into the root of your sd card. Boot into WM,navigate to the Android folder using the file explorer and tap 'clrcad' followed by 'haret'. Android will now boot(first boot will take some time)
4) For dual boot apps:
http://forum.xda-developers.com/showthread.php?t=733752
http://forum.xda-developers.com/showthread.php?t=723200
Download any one of the dual boot apps you want. But for both, ensure that you install them in the device,not SD Card. These apps will let you choose if you want to choose WM or Android. It also automatically executes 'clrcad' and 'haret' from the Android folder, so its just a matter of choosing the OS you want.
Done.Ensure that you backup your contacts,settings,etc via PIM backup or if you are using a different backup app,you can use that as well. Also, follow all steps in the links clearly. If you have any questions, ask. Failure to comply with instructions may brick your HD2. I hope this helps and kindly do a bit of research before posting questions here. But since this involves flashing, i am helping, so that the chances of you bricking your phone is minimised.
there's also exceller's android loader
http://forum.xda-developers.com/showthread.php?t=737001
if you have problems with SD android look in my sig, my troubleshooter solves most of them
ty for helping guys i was occupied with my lt (was broken...)... But now i have a question for you... When i go to boot loader i see that the SPL version is 2.08.HSPL ... Should i flash it again with HSPL4 or just flash with another wm rom (i want to change it so...). Ty for reply
king_slavcho said:
ty for helping guys i was occupied with my lt (was broken...)... But now i have a question for you... When i go to boot loader i see that the SPL version is 2.08.HSPL ... Should i flash it again with HSPL4 or just flash with another wm rom (i want to change it so...). Ty for reply
Click to expand...
Click to collapse
If you are wanting to dual boot Windows Mobile and Android then you do not even need HSPL. You only need HSPL if you want to flash anything to the NAND of the HD2. Android from SD runs via the SD card and does not effect the NAND in any way. So no you do not need to flash HSPL again.
ok ty very much i made the dual boot... yeeey ... can you give me a good WM rom? i flashed my hd2 with the ugliest rom ever
Check out the Energy ROMs, people seemed to love them.
Hey guys,
I have done quite a bit of searching around and have not really found a direct answer. I have dualboot American Android running and I want to update it. What are the proper procedures in updating a dual boot ROM? Thanks
eioous said:
Hey guys,
I have done quite a bit of searching around and have not really found a direct answer. I have dualboot American Android running and I want to update it. What are the proper procedures in updating a dual boot ROM? Thanks
Click to expand...
Click to collapse
You can update it by changing the contents of the android directory. You should have a backup of your data
Sent from my HTC Desire HD using XDA App
Good day to all
I am new to the site and would like to say hi to everybody, especially the developers doing awesome work.
I am from South Africa and not sure which rom to use. I want to install Android on my HD2. I am on the Vodacom network I have read here that installing wrong rom can brick the phone. If any body can point me in the correct direction it will be appreciated, also the correct install process. I downloaded Team Blue Roid rom but not sure how to install.
Enjoy the day
Heres what you'll want to do:
Install HSPL
Flash a X.XX.50.XX radio
Install MAGLDR
Install CWM Recovery with the proper size partition layout for the Android ROM you wish to use. The partition size is usually listed on the the first or second post of the ROM's thread
Place the rom.zip file at the root of your sd card
With the sd card in the phone, boot into MAGLDR, and go into CWM Recovery (AD Recovery), choose Flash zip from sd card, choose zip from sd card, and flash the rom
I would recommend using the HD2 NAND Toolkit to flash HSPL, MAGLDR, and CWM Recovery. It makes it much simpler than doing each thing as its own separate process.
http://forum.xda-developers.com/showthread.php?t=1090783&highlight=toolkit
You can run any Android ROM on your HD2, just follow the directions I have listed here in order, and read and follow the directions in the thread where you find your rom
Sent from my HTC HD2 using XDA App
KickassDealer said:
Good day to all
I am new to the site and would like to say hi to everybody, especially the developers doing awesome work.
I am from South Africa and not sure which rom to use. I want to install Android on my HD2. I am on the Vodacom network I have read here that installing wrong rom can brick the phone. If any body can point me in the correct direction it will be appreciated, also the correct install process. I downloaded Team Blue Roid rom but not sure how to install.
Enjoy the day
Click to expand...
Click to collapse
Hi new user!
Right direction -> http://forum.xda-developers.com/showthread.php?t=915663
Always read the stickies, that is where you will find ALL the information you need. If not, there is always the search function
Good luck!
This is a very good guide to installing full NAND Android on the HD2. I followed this, and it made it very simple and clear. The main thing to understand is that if you read and follow instructions, you will NOT brick your phone.
Good luck
Hi, I have the hdc hd2 with spl 3.03.0000 xe, and radio 2.15.161.3.
You maybe able to tell by that that im new to this, but want to install android as i dont like windows 6.5. I've managed to install a stock windows rom with the information i've learned here. But now i need help.
I want to install froyo or gingerbread as ive used these before on other phones.
So what is the easies way to do it and wheres the best place to get the rom from.
Please try to make it as simple as possible, Thanks.
It depends, do you want NAND Android or are you happy with running SD Android? Basically, if you want SD Android it couldn't be simpler. Just go to the SD section, download a build, place the Android folder on the root of your SD card and hit CLRCAD then HARET in the file manager. If you want NAND Android it's still pretty straightforward. Follow this guide and you should be fine. If you find even this guide too complex try using the NAND Toolkit. If you can't use that, don't bother flashing NAND Android and stick with SD Android.
Have you tried using Google? <<< I'm flaming.
Why didn't you look for the Newbies' Guides that are floating everywhere? they will guide you from the moment you pay for your phone till you are welcomed with Android's welcome screen. <<<I'm trying to be nice.
Here you go : http://forum.xda-developers.com/showthread.php?t=893948 , from start to finish. <<< I'm being nice.
Choose wisely ...
EDIT:
It always takes more time to write a poem than it does to write an article
You were faster this time, Nigel
Edit v1.1:
lol, I guess you're right, It's a double win . Furthermore, I just couldn't b.a. to look for a recent guide, I simply made a quick google about guides for hd2-android and this came up, didn't really check it
Next time, I'll be faster ..... and use bigger words
Marvlesz said:
Have you tried using Google? <<< I'm flaming.
Why didn't you look for the Newbies' Guides that are floating everywhere? they will guide you from the moment you pay for your phone till you are welcomed with Android's welcome screen. <<<I'm trying to be nice.
Here you go : http://forum.xda-developers.com/showthread.php?t=893948 , from start to finish. <<< I'm being nice.
Choose wisely ...
EDIT:
It always takes more time to write a poem than it does to write an article
You were faster this time, Nigel
Click to expand...
Click to collapse
Muahahahaha, I win Also, you linked an outdated guide for the DFT Stock desire build, so I double win (if that's possible)
Thanks guys after more reading and searching i think i should go the nand root.
This means i need hspl on it it first and i can only install this if i have spl 1.42.0000. Mine says spl-3.03.0000. It also says installing a stock rom will roll this back. I've installed stock win rom yesterday and it didnt touch the spl.
Can i still install hspl with this or do i need it?
Is there a list of available roms on this site?
tradvang said:
Thanks guys after more reading and searching i think i should go the nand root.
This means i need hspl on it it first and i can only install this if i have spl 1.42.0000. Mine says spl-3.03.0000. It also says installing a stock rom will roll this back. I've installed stock win rom yesterday and it didnt touch the spl.
Can i still install hspl with this or do i need it?
Is there a list of available roms on this site?
Click to expand...
Click to collapse
*sigh* did you read Marvlesz's post about Google? Download HSPL4 and use it to flash HSPL 2.08, no ROM downgrade is necessary. Basically after you've done that it's as simple as flashing MAGLDR, CWM and your ROM (and trust me, all of that won't take you more than 30 minutes at the very most).
Marvlesz said:
Next time, I'll be faster ..... and use bigger words [/B]
Click to expand...
Click to collapse
Lol, just got that part
Thanks again got the hepl bit done, downloading a rom now got MAGLDIR113 down and ready.
Having problem getting phone to sync with vista on pc, it just wont do it. Got it to sync on the laptop ok, any ideas with pc problem? Keep getting rapitool errors.
tradvang said:
Thanks again got the hepl bit done, downloading a rom now got MAGLDIR113 down and ready.
Having problem getting phone to sync with vista on pc, it just wont do it. Got it to sync on the laptop ok, any ideas with pc problem? Keep getting rapitool errors.
Click to expand...
Click to collapse
Check your device manager did u see mobile device? and is it working?
if not try to Reinstall the WMDC driver?
I used to have this problem too after i reinstall the driver the phone will be detected again.
However if u still can't connect the phone to your PC (it's driver problem, i think).
Try task 29 Change to cLK for me it fixed everything. (using HD2 toolkit is easiest way)
Sorry for being a bit dumb here but stuck again.
I've downloaded 4 roms-
danik supersonic v1.0 lite
boxmax.s3.5v8.0.magldr
boxmax.s3.5v8.5.magldr
boxmax.s3.5.v8.5.haret.sd
unzipping the first 3 provide no DAF.exe or install.exe, so stuck there.
unzipped the last and copied to sd card and the phone just stalls on the htc quietly brilliant screen.
What can i try next?
tradvang said:
Sorry for being a bit dumb here but stuck again.
I've downloaded 4 roms-
danik supersonic v1.0 lite
boxmax.s3.5v8.0.magldr
boxmax.s3.5v8.5.magldr
boxmax.s3.5.v8.5.haret.sd
unzipping the first 3 provide no DAF.exe or install.exe, so stuck there.
unzipped the last and copied to sd card and the phone just stalls on the htc quietly brilliant screen.
What can i try next?
Click to expand...
Click to collapse
Which guide did you follow? The one I posted or the one which Marvlesz posted? Use the one I posted because the one he posted is outdated. You install CWM then flash the ROM as a zip file. I really have no clue how somebody can find it so difficult to follow simple instructions: DOWNLOAD A NAND ROM, NOT AN SD ROM. You've said that you want a NAND ROM and then you try to flash an SD build? At least have some common sense, please. Unless you have a problem which cannot be solved by reading in the future I refuse to give any more help, because it appears to be hopeless
thanks again i've learned alot more tonight, got my first flash done just waiting for it to load. Last question before i leave you alone Is there a way to tell the difference between which mods are CWM and which wont work.
tradvang said:
thanks again i've learned alot more tonight, got my first flash done just waiting for it to load. Last question before i leave you alone Is there a way to tell the difference between which mods are CWM and which wont work.
Click to expand...
Click to collapse
Basically all ROMs use CWM, other than the DFT Stock Desire ROM. For everything else, just download the MAGLDR version of the ROM if there is one (many ROMs automate MAGLDR/cLK), change your system partition to the required size and flash the ROM.
hi tried downloading 6 roms now
DFT_LEO_NAND_Android
BoxmaX.S3.5.v.8.5.Magldr
For.user.Nand.v8.x
BoxmaX.S3.5.v.8.5.Haret.SD
BoxmaX.S3.5.v.8.0.Magldr
DFT_LEO_MAGLDR113_DAF
Android_2.3.5_Danik_Supersonic_v.1.0_Lite
Put all of them on the memory card and it only recogognises the Danik one when i go to choose zip from sd card.
When i try to load that it goes through ok till i reboot then it freezes at the HTC screen.
tradvang said:
hi tried downloading 6 roms now
DFT_LEO_NAND_Android
BoxmaX.S3.5.v.8.5.Magldr
For.user.Nand.v8.x
BoxmaX.S3.5.v.8.5.Haret.SD
BoxmaX.S3.5.v.8.0.Magldr
DFT_LEO_MAGLDR113_DAF
Android_2.3.5_Danik_Supersonic_v.1.0_Lite
Put all of them on the memory card and it only recogognises the Danik one when i go to choose zip from sd card.
When i try to load that it goes through ok till i reboot then it freezes at the HTC screen.
Click to expand...
Click to collapse
Screw it, I can't help you if you're this f**king stupid.
Cheers nasty c*nt.
tradvang said:
Cheers nasty c*nt.
Click to expand...
Click to collapse
Is that how you say thanks to those who were trying to help you ?
Follow this : http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7 شبر بـ شبر and you should have Android by the end of its steps.
(btw, post reported)
I've said thanks before for his help. Ive asked for the difference between mods and how to differenciate them, i cant work out out why only 1 out of 6 is recognised. And i've downloaded the magdlr versions as suggested.
Then he calls me f*cking stupid. Think i have every right to be p*ssed off.
What do you mean by "Difference between mods" ? All mods come in a .zip package that is flashed in CWM.
When you download something (any mod, rom, kernel or anything) off the NAND section (this : http://forum.xda-developers.com/forumdisplay.php?f=928 ) it is going to be a flashable CWM. (Unless noted)
But when you download something off the SD section ( this: http://forum.xda-developers.com/forumdisplay.php?f=735) it is going to be ... well ... to be put on the sd without flashing.
Is this what you are asking for ?
Nigeldg said:
Which guide did you follow? The one I posted or the one which Marvlesz posted? Use the one I posted because the one he posted is outdated. You install CWM then flash the ROM as a zip file. I really have no clue how somebody can find it so difficult to follow simple instructions: DOWNLOAD A NAND ROM, NOT AN SD ROM. You've said that you want a NAND ROM and then you try to flash an SD build? At least have some common sense, please. Unless you have a problem which cannot be solved by reading in the future I refuse to give any more help, because it appears to be hopeless
Click to expand...
Click to collapse
tradvang said:
I've said thanks before for his help. Ive asked for the difference between mods and how to differenciate them, i cant work out out why only 1 out of 6 is recognised. And i've downloaded the magdlr versions as suggested.
Then he calls me f*cking stupid. Think i have every right to be p*ssed off.
Click to expand...
Click to collapse
Sorry, but I have every right to call you stupid too. I even posted DOWNLOAD A NAND ROM, and you go on and download ROMs from the SD section? It's frankly pathetic if you can't do that little reading, and if I were you I wouldn't bother flashing anything in the future. You're lucky you have a pretty much unbrickable device, because if you didn't I'm sure you would be sitting right there with a useless piece of hardware right now.
Thanks Marvlesz, thats got me sorted, the problem was when he said just download the "MAGLDR version", i thought anything with that in the name was the correct one. I'm not here to get into a slanging game so i'll just leave it that.
Thanks again.