Related
Hi,
Yesterday I noticed that that camera as a problem with black dots in all photos and videos. Now there are no spots on the back camera glass or anything.
I am attaching photos for your viewing pleasure
Can somebody please identify the problem with it. Is the camera lens it self damaged or some particles got underneath the glass cover that I can't see or is it a software problem. Also is there a way to take off the glass cover without opening the phone so I can clean the camera lens?
Please help me out guys, this is really very disappointing.
anyone ?. .
Send it to service center.. I had this issue once and it is not dirt cause i tried too clean it out too by opening it..
I got this from abroad its warranty isn't valid where I am now. Any other solutions ?
somebody please help, This is really annoying.
I have the same problem too, mine has 2 big blurry dots It is annoying when I take pictures in high lighted places, in the low light environment it doesn't show up.
Is there any way to open the lens to clean it?
same problem here, seems like some kind of dust got in the lens part, im going to watch some videos of ffc mods to see if it is possible to clean the camera lens.
Edit:
Found the solution, seems like the lens is scratched or something, doing a ffc mod will fix it as the ffc is attached to the 5mp camera, just buy a i9k camera from ebay and mod it.
@AkiraRyu good luck and let us know what happens, Also do see if its possible to lift the glass without opening the phone. Some pictures would greatly help.
I made small dots on the the camera glass to see if they gave the same result but any thing on the glass comes up very blurry on the picture. This definitely is something on the lens it self but its also highly unlikely that its a scratch maybe dust or maybe somethings wrong with the camera.If only there was a way to lift the glass without opening the mobile phone.
I have dust in my I9000 front camera...is there a way to open the phone and clean it?
Sent from my GT-I9000 using XDA App
lucbl1 said:
I have dust in my I9000 front camera...is there a way to open the phone and clean it?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
yes, its quiet easy , i opened to try to clean it yesterday( i think vibrants and galaxy s interational are the same in the back).
First watch some front facing camera mods videos in youtube (ffc vibrant mod) to see how to open it up, you only need to get the 7 screws out and take out the plastic plate , REMEMBER to pull off the microsd card and the gsm/3g chip!.
if cleaning the lens doesn't work (like my case) you will have to buy a camera replacement, i recommend the i9000 camera so you also get a ffc. it costs in ebay 24USD (dont know the shiping to US as i live in another country) it comes with a plastic thing to remove the plastic plate easy and 2 screw drivers.
snazi said:
@AkiraRyu good luck and let us know what happens, Also do see if its possible to lift the glass without opening the phone. Some pictures would greatly help.
I made small dots on the the camera glass to see if they gave the same result but any thing on the glass comes up very blurry on the picture. This definitely is something on the lens it self but its also highly unlikely that its a scratch maybe dust or maybe somethings wrong with the camera.If only there was a way to lift the glass without opening the mobile phone.
Click to expand...
Click to collapse
Good and bad news:
Opening is really easy, used my fingernails to open the plastic plate, after you get the plastic plate(not the back cober) the plastic protecting the lens also comes off, i cleaned it (A LOT) and the violet dot thing was still there.
there are 2 solutions... 3, first do nothing and keep the camera as it is(no way!) , second buy a vibrant camera replacement , or third (and best) buy a i9000 camera replacement.
In the third case you also get a front facing camera because the 5mpx camera and the ffc are connected, the look petty much like this:
androidsfinest .com /wp-content/uploads/2010/09/i9000s-camera-close-up-150x150.jpg
in the vibrant the ffc camera is cut off the 5mp camera and the place where the ffc goes is painted in black. the cameras are the same, lot of users on xda have moded their vibrants, search on youtube for guides on how to do it
i recommend : FIRST make sure to pull off the gsm chip and the microsd card (if you use one), use a ordered and clean place to do it, get something where to put the screws( lost one because i chose a bad place to put them).
Still waiting for a solution :s. I don't wanna open my new phone takes away all its glory.
Beware: the camera lens on the back of our SGS II is made of cheap plastic. I learned the hard way.
Yesterday I was using the camera and all was really good. Today all photos were blurred. I checked and noticed a small bend, yes a bend, right in the middle of the camera lens. It is not a scratch, which has been my concern since buying the SGS2, it was a bend. I may be wrong, but glass should not bend, it scratches. Now I don't have a lens anymore, I have a prism.
The phone did not fall, or was treated badly. Most probably, I put it in my pants' front pockets, as I have done for years with my HTC phones (horrible cameras btw, compared to the sgs2), there may have been a contact with a harder surface (a key, maybe, but I don't suppose so), and the lens bended. It's a real pity. I'm considering now removing the "lens" as it is not the actual lens, just a cover I guess, and see if this works.
This may be the best and most expensive cell phone right now, why couldn't Samsung put a real glass (like apple does, btw) to protect the camera?
I hope this warning helps others not to get into the same problem. Maybe using a leather pouch can prevent this from happening (I was using the mesh cover case).
A previously super happy owner, now a very desolate one...
what did you do to your phone? Don't blame samsung for something you physically you did.
Sent from my GT-I9100 using XDA App
thats strange? a bit of plastic with those dimensions shouldn't bend at all, unless put under direct heat and pressure? :S
can you post pictures taken and a picture of the lens?
I don't have another camera with me to photograph the lens. Besides, it is hard to see the bend, you need the correct angle for the light to hit it and be able to see. But attached is a picture I took with the cell. Kind of artsy...
I would have thought that if it did actually have a bend in it (which seems like an awfully difficult thing to have done), that it would cause a distortion and not just producing a blurry pic like that.
Looks more like something has been smeared across the lens cover.
It's not the lens that bended, it's the protective screen on top of the lense. Looks like glass to me, but it's possible to be plastic. Any way, i doubt it could bend unless you put a lot of pressure on it.
As I said, it was in the front pocket of a not so tight pants, so there might be little pressure, normal pressure as every cell phone suffers in this situation, but nothing exceptional, not much. Nobody sat on my lap as well... That would be a worthy reason at least.
I've had smartphones for the last 6 years, done the same thing since. I'm not asking for a replacement or whatever, so I have no reason to minimize my responsibility.
My point in posting is that it happened. Just trying let others know to not make the same mistake. It is not as solid a construction as, say, the HTC HD2. It needs more care.
Just beware, hope it does not happen to others.
PS: And no heat also, not a teenager anymore to have so much heat near the crotch area...
PPS: Yes, it is the protective screen. My hope is I can get rid of it, and have my camera back. Unprotected, but taking photos, with lots of care from now on...
OP, stupid question: that lens glass out of the box was protected with a transparent plastic film I think, just like the screen. Did you remove it?
Can you make a shot of the lens using a bathroom mirror perhaps, in macro mode?
mbernstein said:
I've had smartphones for the last 6 years, done the same thing since. I'm not asking for a replacement or whatever, so I have no reason to minimize my responsibility.
My point in posting is that it happened. Just trying let others know to not make the same mistake. It is not as solid a construction as, say, the HTC HD2. It needs more care.
Click to expand...
Click to collapse
I agree with your here. The way Samsung designed the back of the phone makes it very easy to scratch/ even bend (like it happened to you) the protective screen. I had a HTC Touch HD before and the back of the camera could never touch the surface where the phone was put. With Samsung if you put your phone on a rugged area you might end up damaging the protective screen easily.
Have you been using the LED as a torch or anything like that? Perhaps the heat could have warped the plastic?
kreoXDA said:
OP, stupid question: that lens glass out of the box was protected with a transparent plastic film I think, just like the screen. Did you remove it?
Can you make a shot of the lens using a bathroom mirror perhaps, in macro mode?
Click to expand...
Click to collapse
Sure, I took the plastic out. I saw no point in having a very good phone camera weakened by the plastic.
I tried to take the photo you asked, but was not successful. But as I said it was a very small bend, which makes the light enter the lens like a prism. Very difficult to photograph with a normal camera.
Actually, there was a power outage in the area I'm in now, but I don't recollect to use torch that much... I remember I used it for a while, the used some screen light, then on to Kindle. Id on't suppose it was torch, but could it really be so silly like this?!
mbernstein said:
Sure, I took the plastic out. I saw no point in having a very good phone camera weakened by the plastic.
I tried to take the photo you asked, but was not successful. But as I said it was a very small bend, which makes the light enter the lens like a prism. Very difficult to photograph with a normal camera.
Actually, there was a power outage in the area I'm in now, but I don't recollect to use torch that much... I remember I used it for a while, the used some screen light, then on to Kindle. Id on't suppose it was torch, but could it really be so silly like this?!
Click to expand...
Click to collapse
Wow, I just tried pushing on mine with my nail, it moves a teeny tiny bit, but it springs right back up Maybe something in your pocket just happened to touch the middle of that little piece of plastic, and just managed to apply enough force to bend it beyond the recovery point, so your plastic piece did not spring back up.
I fully understand what you mean now. But not sure what your options are. It is clearly a physical damage. I would not advise trying to take that piece out and bend it straight, you will mess up the actual lens.
mbernstein said:
A previously super happy owner, now a very desolate one...
Click to expand...
Click to collapse
flash back stock firmware, reset custom download counter with jig, return under warranty saying the camera takes blurry pictures
godutch said:
flash back stock firmware, reset custom download counter with jig, return under warranty saying the camera takes blurry pictures
Click to expand...
Click to collapse
I believe warranty doesn't cover physical damage though.
Ingvarr said:
I believe warranty doesn't cover physical damage though.
Click to expand...
Click to collapse
they wont know if you dont tell them plus they wont inspect the phone in that detail closely at the camera, worth a try. IF you bough it from a store, bring it back there and get a replacement.
Hi,
I have the same issue as yours.
Where is your SGS2 made in when you take out the battery and look at the back sticker?
Mine says "Made in China"
Wonder if yours is made in Korea or China.
Please share~
I would send it in too, your chances are good to get it repaired!
Mine is made in: Korea
I would try to replace it if I had bought it in my country. I bought it through a friend from Xpansys US (a UK phone), and I'm now in Brazil. I guess I would have so many troubles with customs here to send it out and back with no guarantee to have it replaced...
My idea is not to take the plastic out, and try to fix it. It is to just take out. I will have a hole there, but there will be nothing distorting light that comes into the lens. I will have to be extra careful, but considering how easy the plastic which was supposed to protect the camera was damaged, extra care is the name of this phone for me.
And I'm not complaining about SGS2's plastic finish as opposed to the metal/glass ones of iPhone or HTC. I actually like this, including the back cover. After you get used to it, it is kind of cool. And it is light. I just wished there was a cover or that Samsung used a hard glass on the camera, or perhaps that the plastic was so tiny and receeded that nothing could reach it. I always like the way Sony and Nokia used to put a sliding cover over the camera lens in their phones. With such a thin phone as ours, I wouldn't mind the extra thickness. Or like my HTC Kaiser, where the plastic was actually on the cover. If it was scratched or broken you could replace the back cover... Sorry, just venting my frustration.
Don't leave that hole uncovered. Your lens will get dirty in no time. Pocket lint , dust and dirt will accumulate in there and break the lens autofocus mechanism. Just don't even think about leaving that hole uncovered.
Hi all,
I would like to remove the infrared filter of the main camera of nexus10.
Has some of you already experienced this ?
can't find anything on the web.
Thx.
If the main camera is the rear, you can take off the back and possibly remove it (if it's like a strip of plastic or something like that anyway, idk). Front camera may be a good bit harder to get access to.
espionage724 said:
If the main camera is the rear, you can take off the back and possibly remove it (if it's like a strip of plastic or something like that anyway, idk). Front camera may be a good bit harder to get access to.
Click to expand...
Click to collapse
hey thanks for the response. For me the main camera is the 5 millions pixels cam. I don't know if you are talking about this one ?
Anyway if I could find the datasheet of the nexus10 I could know the camera component without destroying it
I keep searching, but with no results
AW: [Q] remove nexus 10 infrared filter
I hardly doubt you can remove it, it's probably all glued together like crazy...
frauhottelmann said:
I hardly doubt you can remove it, it's probably all glued together like crazy...
Click to expand...
Click to collapse
the back can be taken off (with some effort), and the rear camera can be fully accessed and removed even. I don't know how the infrared filter is exactly implemented though.
The rear camera is the 5MP camera; front is 1.9MP.
Old cameras used to have a little plastic sheet in between some of the optics. Even this was hard to get out, as you would have to break the glue holding the optics together, leaving you with a bad lense once you're done. Now, it's more likely a coating on the glass, so the only way to remove it is with sand paper. Which as you can imagine is not conducive to optics.
Out of curiosity, can I ask why you want to remove it? I'm intrigued
What does the infrared filter do?
I want to make some blobs tracking, (computer vision). so the camera need to see in black light.
The main camera does filter infrared, even without any lens…I suspect the filter is on the cmos sensor…which I cant' do anything about…
Hi Guys
Alot of users find that the m8 camera is crappy and takes bad pictures..well youre about to change your opinion!
I'm here to deliver a tip discovered by +Chris isEnlightened from google+
Get a couple q-tips. And a bathroom.. I'd start with one q tip. Just touch it to the toothpaste to get some on it. You don't want a lot.. go in the same direction and apply pressure in a circular motions, basically buffing the lens.. then add a tiny drop of water and repeat the process.. like a wet sanding.. then take a clean q tip and go over once more.. then wipe off.. you should be able to see the film that's over the lens come off in the middle.. open the camera lens and look to see if it's clean. An easy way to tell is with white objects. They will be fuzzy and glow and appear "soft"
and this is it .. 2 minutes and you camera will improve forever and you won't need to do it again. basically it's a very thin film on the lens that need to be scratched. it can be done to front and rear cameras.
You can find before and after pics in the attachments
Yeah .. we know
http://forum.xda-developers.com/htc-one-m8/general/how-to-fix-htc-one-m8-camera-issue-t2803825
I noticed my camera lens was scratched all to hell the other day. My pictures weren't fuzzy like your samples, but I was worried they would get that way if the scratches got worse. I went the toothpaste route as per your instructions and it worked like a charm. Nice, clear camera lens, just like new. Thanks!
Thread closed.
Please search for existing threads before creating new ones.
Many thanks,
Ghost
Hi,
My camera lens is badly scratched.I tried to fix using toothpaste,water,lotion etc but nothing works on him.
Pics are in attachment.
Is there's any thing that should be able to remove its scratches??
EvilKing009 said:
Hi,
My camera lens is badly scratched.I tried to fix using toothpaste,water,lotion etc but nothing works on him.
Pics are in attachment.
Is there's any thing that should be able to remove its scratches??
Click to expand...
Click to collapse
Toothpaste method is for removing oleophobic coating, it doesn't really remove the scratches but the whole thing on top of your lense. If it doesn't work for you, then it might be that the camera lense on g2 is different from the phone the guide you were following was written for. If your pics quality is really affected by the scratches, you should change the rear housing backplate that contains camera lens & volume buttons. It's around $20 I think.
MilanStojkovic said:
Toothpaste method is for removing oleophobic coating, it doesn't really remove the scratches but the whole thing on top of your lense. If it doesn't work for you, then it might be that the camera lense on g2 is different from the phone the guide you were following was written for. If your pics quality is really affected by the scratches, you should change the rear housing backplate that contains camera lens & volume buttons. It's around $20 I think.
Click to expand...
Click to collapse
yes.Camera is creating foggy and grainy pictures so thats why i am looking for it,how about if i use metal polish on it ??
EvilKing009 said:
yes.Camera is creating foggy and grainy pictures so thats why i am looking for it,how about if i use metal polish on it ??
Click to expand...
Click to collapse
Metal polish doesn't sound like a good idea, it might damage the glass (if it's glass underneath anyways). Just noticed mine is scratched too, but pics seem decent. It's a really bad quality I guess since I use double layer hard case for my phone and I doubt lens is in contact with anything most of the time. I dunno man, google a bit about it. Replacing the part if nothing works, or if you mess things up. Be careful. There are some guides online but I think finding out which material is it made of is essential. For example, if it's polycarbonate you can use something with hydrofluoric acid. It will remove everything from it leaving the lense clear. But if it's glass, hydrofluoric acid will dissolve it and make it look like frosted glass.
MilanStojkovic said:
Metal polish doesn't sound like a good idea, it might damage the glass (if it's glass underneath anyways). Just noticed mine is scratched too, but pics seem decent. It's a really bad quality I guess since I use double layer hard case for my phone and I doubt lens is in contact with anything most of the time. I dunno man, google a bit about it. Replacing the part if nothing works, or if you mess things up. Be careful.
Click to expand...
Click to collapse
Thanks.I guess it is the only way to fix is to replace its rear cam housing.
Pretty cheap fix, I'm having the same problem with the rear can pics coming out foggy with streaks.
EvilKing009 said:
Hi,
My camera lens is badly scratched.I tried to fix using toothpaste,water,lotion etc but nothing works on him.
Pics are in attachment.
Is there's any thing that should be able to remove its scratches??
Click to expand...
Click to collapse
pretty sure you are over it by now, but ill leave this gem over here.
buy off a low quality phone housing and replaced only the camera lens glass cover by popping it out. ebay had an offer for $5+ as i remember.
well, its not that so hard for you to find its housing.For me, in my country , its really really hard to find as no one sells LG parts so much.
If you are having trouble finding it and you don't mind waiting, order it online. AliExpress for example