Database Users

Stuck in fastboot?

My phone just boots right to fastboot. Is there anyway to fix this?

There are two possible solutions, the first one requires an Engineering SPL, and the other possibly a goldcard.
1. If you have an Engineering SPL then you can just use the command "fastboot flash recovery recovery.img" and then flash a ROM from that recovery.
2. If you don't have an Engineering SPL you can copy a SAPPIMG.zip file to your SDCard which will automatically flash the phones' radio,spl,recovery,splash,boot,data,system...and what not, restoring it to an un-rooted state.

fastboot info
hockeyadc said:
My phone just boots right to fastboot. Is there anyway to fix this?
Click to expand...
Click to collapse
What do you c on your screen?
Post it all here... then we can help you :0)
The good news is as long you have fastboot, your phone IS NOT BRICKED :0)

Stuck in Fastboot after attempting to flash new CM from ROM Manager
I have always manually installed through Amon RA, but I downloaded ROM Manager from the market and tried to install the new stable CM 6.0. I was stuck with the T-Mobile G1 screen for 20 minutes before attempting to reboot into recovery (removing the battery and holding down Home+Power). It went back to the G1 screen.
I can get to Fastboot (Power+Camera), but that's it. I'm not sure where to go from there. I don't know how to get back to recovery or interact with my phone through USB connection to my computer. Can someone help? All I see in Fastboot is what is below. Pressing numbers on my keypad on my phone does nothing.
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA1000)
CPLD-4
RADIO-2.22.23.02
APR 20 2009, 15:30:43
HBOOT
Parsing...[DREAIMG.nbh]
[1] BOOTLOADER
[2] RECOVERY
[3] BOOT
[4] SPLASH1
[5] SYSTEM
[6] USERDATA
[7] RADIO_V2
Do you want to start update?
<ACTION> Yes
<POWER> No

graymoment said:
I have always manually installed through Amon RA, but I downloaded ROM Manager from the market and tried to install the new stable CM 6.0. I was stuck with the T-Mobile G1 screen for 20 minutes before attempting to reboot into recovery (removing the battery and holding down Home+Power). It went back to the G1 screen.
I can get to Fastboot (Power+Camera), but that's it. I'm not sure where to go from there. I don't know how to get back to recovery or interact with my phone through USB connection to my computer. Can someone help? All I see in Fastboot is what is below. Pressing numbers on my keypad on my phone does nothing.
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA1000)
CPLD-4
RADIO-2.22.23.02
APR 20 2009, 15:30:43
HBOOT
Parsing...[DREAIMG.nbh]
[1] BOOTLOADER
[2] RECOVERY
[3] BOOT
[4] SPLASH1
[5] SYSTEM
[6] USERDATA
[7] RADIO_V2
Do you want to start update?
Yes
No
Click to expand...
Click to collapse
You would be better off asking in the G1 forums since this one is for the myTouch/HTC Magic one.
Sent from my HTC Magic using XDA App

[Q] Need some help on SPL problem

Hi guys/gals, I know I did a stupid thing which I downloaded a wrong SAPPIMG.zip for breaking the perfect SPL, my Magic is a 32A device and the original SPL version should be a "H" instead of "G".
Now after flashing the sappimg.zip, my phone's SPL + Radio info as below:
SAPPHIRE UNKNOWN 32A SHIP s-ON G
HBOOT-1.33.0006 (SAPP10000)
CPLD-12
RADIO-2.22.19.26I
May 27 2009, 19:06:41
So... I tired to use fastboot method to boot to recovery, it shows remote not allow. And then, I tired to use the gold card method to flash the Europe RUU by using the rom1.zip renaming as sappimg.zip, I've also tried the Roger one
Everything is going fine but I got the Partition Update Fail, message like below:
[1] BOOTLOADER - OK
[2] RADIO V2 - OK
[3] SPLASH1 - OK
[4] RECOVERY - OK
[5] BOOT - OK
[6] SYSTEM - Fail-PU
[7] USERDATA - OK
Partition update fail!
Update Fail!
More over, my Magic is from Hong Kong and I've tired the Hong Kong RUU, but I got a "Main Version is older" using the gold card method, and I got a "Bootloader Version Error" by running the RUU on windows.
And then, I've tired the ROM v2.53.707.2 from the thread "[How-To] Fix perfected SPL (fastboot remote: not allow)" by Amon_RA (Sorry for I am too new to post a URL here)
Is there anyone experienced the same and got a solution? I've tried the whole day but I just can't any suitable sappimg.zip or whatever. Could someone point me to the right direction?
Thanks so much for your time reading this post.

[Q] need help think i bricked it

I have a mytouch 3g with the 3.5 mm jack
i tried to root it via theunlockr.com. I went as far as downloading the sappimg.zip file, however when i clicked on the link it sent me to yahoo search saying it couldnt find the file. so i did a search there n got 1 after i let the sappimg that i found install on my phone n it rebooted with the vodafone logo n froze from there. i tried geting other sappimg files but they all got stcuk at unzippiging system.
this is the screen it get:
SAPPHIRE UNKNOWN 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
MAY 8 2009,21:02:32
HBOOT
Parsing...[SD ZIP]
[1] SYSTEM -Unzipping
[2] USERDATA
[3] BOOT
[4] BOOTLOADER
[5] RADIO_V2
[6] RECOVERY
[7] sPLASH1
Update is in progress...
Do not power off the device!
can some1 help me to correct it plz

Yeah, don't go flashing files to your phone when you have no idea what they are. Have a look around, there are plenty of people with the same issue.

how can I recover my HTC my touch 4G

Hi,
I made a mistake in loading a android froyo build to my HTC my touch 4g.
And now, my htc my touch 4g won't boot up. It stucks in teh 'My Thocuh HD' screen.
Can you please tell me how can I recover my phone?
Either load the original factory software?
or
Load cyanogenmod?
Thank you.

How did you load it? Standard procedure is to make a backup first... So go back into recovery and restore it.
Tell us more about what you did? What hboot and recovery do you have?
Sent from my CM7 HTC Glacier

After I build a ginger bread build, i did
fastboot flash userdata userdata.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And then the phone now hangs in flash screen.
Can you please tell me how can I recover from it now?

hap497 said:
After I build a ginger bread build, i did
fastboot flash userdata userdata.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And then the phone now hangs in flash screen.
Can you please tell me how can I recover from it now?
Click to expand...
Click to collapse
Since you can get into the HBoot, if it were me i'd load the PD15IMG and start all over.

neidlinger said:
Since you can get into the HBoot, if it were me i'd load the PD15IMG and start all over.
Click to expand...
Click to collapse
exactly what i was going to suggest.

I assume you mean pd15img from here:
ttp://filespart.com/p/pd15img-mytouch-4g.html
What do you mean i can get to 'HBoot'? I now do a 'adb devices', it does not show my touch 4g anymore.
Thank you for all the help.

hap497 said:
I assume you mean pd15img from here:
ttp://filespart.com/p/pd15img-mytouch-4g.html
What do you mean i can get to 'HBoot'? I now do a 'adb devices', it does not show my touch 4g anymore.
Thank you for all the help.
Click to expand...
Click to collapse
This is the PD15IMG.img
download it and store it to the root of the SD card. When you go to turn the phone on hold the power button and the volume down button. IT will pick up that image and ask if you want to restore the phone according to the PD15IMG.

Thanks. I download PD15IMG.zip and copy it to the root of the SD card. But when i boot up the phone under HBoot. It said 'no image PD15IMG.zip is found'

So, what happens when it fails? And says " - Fail -PU" Partition update fail

hap497 said:
Thanks. I download PD15IMG.zip and copy it to the root of the SD card. But when i boot up the phone under HBoot. It said 'no image PD15IMG.zip is found'
Click to expand...
Click to collapse
Not work mytouch 4g
hello buddy
hepl me please
this happend
BOOTLOADER FAIL-PU
BOOT FAIL-PU
RECOVERY FAIL-PU
SYSTEM FAIL-PU
USERDATA FAIL-PU
SPLASH1 FAIL-PU
TP
TP BYPASSED
RADIO?V2 UPDATING
RADIO?CUST
DO YOU WANT TO START UPDATE
VOL UP YES
VOL DONW NO
UPDATE IS IN PROGRESS....
DO NOT POWER OFF THE DEVICE!
I've been 30 minutes and DO NOT PASS THE SAME
HELP ME PLEASE
SCOTTY85
WHAT I SAID IT WORKED
http://s3.subirimagenes.com:81/fotos...95imag0062.jpg
http://s3.subirimagenes.com:81/fotos...01imag0060.jpg
http://s3.subirimagenes.com:81/fotos...ffffffffff.jpg
http://forum.xda-developers.com/showthread.php?t=901477
I donwloaded this too but not work
already test as 5 ROM
you can tell me where could found 1
thanks
God bless you
I hope you answer.

eams1986 said:
Not work mytouch 4g
hello buddy
hepl me please
this happend
BOOTLOADER FAIL-PU
BOOT FAIL-PU
RECOVERY FAIL-PU
SYSTEM FAIL-PU
USERDATA FAIL-PU
SPLASH1 FAIL-PU
TP
TP BYPASSED
RADIO?V2 UPDATING
RADIO?CUST
DO YOU WANT TO START UPDATE
VOL UP YES
VOL DONW NO
UPDATE IS IN PROGRESS....
DO NOT POWER OFF THE DEVICE!
I've been 30 minutes and DO NOT PASS THE SAME
HELP ME PLEASE
SCOTTY85
WHAT I SAID IT WORKED
http://s3.subirimagenes.com:81/fotos...95imag0062.jpg
http://s3.subirimagenes.com:81/fotos...01imag0060.jpg
http://s3.subirimagenes.com:81/fotos...ffffffffff.jpg
http://forum.xda-developers.com/showthread.php?t=901477
I donwloaded this too but not work
already test as 5 ROM
you can tell me where could found 1
thanks
God bless you
I hope you answer.
Click to expand...
Click to collapse
you're done...
read here:
http://forum.xda-developers.com/showpost.php?p=13709837&postcount=22

hap497 said:
Thanks. I download PD15IMG.zip and copy it to the root of the SD card. But when i boot up the phone under HBoot. It said 'no image PD15IMG.zip is found'
Click to expand...
Click to collapse
I am having this problem, and I am stuck.
I also get the md5 mismatch when trying to do a restore.

hoostie said:
I am having this problem, and I am stuck.
I also get the md5 mismatch when trying to do a restore.
Click to expand...
Click to collapse
1) do not flash the PD15IMG from the recovery image.
2) if you have a wrong PD15IMG then you need to re-download and check the MD5 again.

neidlinger said:
1) do not flash the PD15IMG from the recovery image.
2) if you have a wrong PD15IMG then you need to re-download and check the MD5 again.
Click to expand...
Click to collapse
I am not trying to flash the pd15img from restore. Sorry thats separate. I made a nandroid backup before i wiped the phone, and I get an md5 error on that. And the phone wont let my flash any other roms either.
Now I dont know what to do.
Where can I find an alternate pd15.img. Sorry I am lost and I just dont know what to do.
***edit, nevermind. I figured it out. Thanks

I'm also getting fail-pu but only on the first item in the list bootloader. When using adb and trying to read the mmcblk I get can't read mbr. So I'm thinking the mbr is corrupted. If that is the only issue keeping pd15img.zip from updating is it possible to fix the mbr? or does having one fail-pu in that list mean a fried eMMC? I'm sure if there is a fix for the mbr my MT4G could be salvaged without replacing the motherboard. My issue started with a bunch of failed auto-updates. The last thing it tried to update was SKYPE,thats when I notice more failed updates. I rebooted and all seemed fine. The next day I went grocery shopping and in front of the Frootloops section, my calculator started crashing. FDW loader stopped responding. I received a sms message and fdw crashed again. So I rebooted and ironically it went into bootloops as I reached for the fruitloops. Pulled the battery and rebooted into hboot then into clockworkmod recovery .I had cyanogenmod 7 7.01, did not try to update to the newest one,but noticed that clockworkmod recovery did somehow auto update into 5.0.2.0 Thats where my issue must have come from. I noticed the dreaded E:can't mount /cache/ so I rebooted again in the middle of a supermarket and noticed pd15diag.zip was not found in hboot. Went home and tried everything I could find with Google. While using ADB (can't remember the exact commands) I noticed the MBR was unabled to be read. which is why I get the fail-pu in the bootloader. If other people are getting this and not fail-pu on everything in the list, there might (a really slim chance) of recovery from this. Is there another way to determine that the eMMC chip is fried?
here is the output I get when updating PD15IMG.zip this is on hboot-0.85.2007 Glacier PVT ENG S-OFF
1 bootloader -- fail-pu
2 boot
3 recovery
4 system
5 userdata
6 splash1
7 tp
8 tp
9 radio_v2
10 radio_cust
partition update fail!
update fail
press <power> to reboot.

[Q] Magic - Fastboot: FAILED (remote: not allowed)

Hi there,
I'd like to update to a newer Android Version. So as I read I have to flash a new recovery first. I tried to create a gold card in order to flash this new recovery but I still get an error when I use fastboot.
I read several tutorials and threads in this forum but i couldn't find the right answer. I hope someone can help me.
Is there a problem with a "ScanDisk" gold card...?
Error in Fastboot (sudo ./fastboot flash recovery recovery-RA-sapphire-v1.7.0H.img):
sending 'recovery' (4520 KB)... FAILED (remote: not allow)
System / Fastboot Commander Output:
Operating system: Linux.
Tools folder and fastboot file(s) created.
The folder containing the IMG files was not found.
MagicFiles folder found.
recovery-ra-magic_6.35-v1.7.0.1.img found.
radio_htc_pvt_32a_3.22.20.17.img found.
hboot-1.33.2010.img found.
hboot-1.76.2007.img found.
radio_htc_pvt_32a_6.35.16.19.img found.
recovery-ra-sapphire-v1.7.0h.img found.
"Flash old" button enabled.
"Flash new" button enabled.
No Nandroid folder was not found - "Restore" button disabled.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
Radio version: 3.22.23.18.
SPL/hboot version: 1.33.0014.
product: sapphire.
mid: sapp10000.
security: on.
build-mode: ship.
-----------------------------------.

You said you have a Goldcard already, right?
Also, only do this if your Magic is a 32B. If it's a 32A, you're bricked for life (and I'm not responsible). It says on the fastboot screen which you are.
If it is a 32B, get the first download from the NBH/ZIP section of this thread <a href=http://forum.xda-developers.com/showthread.php?t=548218>here</a> (Make sure to read the warnings at the top) and put it on your normal SD card.
Then, boot into HBOOT mode by either
1. Booting into Fastboot mode and pushing volume down.
2. Booting phone with volume down pressed.
It should find the sappimg after a minute. If not, make sure the sappimg is on the SD card not in any folders and also that it's named SAPPIMG.zip.
Choose yes to all the questions. If it has an error, reboot and try again or try it on a Goldcard.
Now fastboot should work and you can do whatever.

I_Cornholio said:
You said you have a Goldcard already, right?
Also, only do this if your Magic is a 32B. If it's a 32A, you're bricked for life (and I'm not responsible). It says on the fastboot screen which you are.
If it is a 32B, get the first download from the NBH/ZIP section of this thread <a href=http://forum.xda-developers.com/showthread.php?t=548218>here</a> (Make sure to read the warnings at the top) and put it on your normal SD card.
Then, boot into HBOOT mode by either
1. Booting into Fastboot mode and pushing volume down.
2. Booting phone with volume down pressed.
It should find the sappimg after a minute. If not, make sure the sappimg is on the SD card not in any folders and also that it's named SAPPIMG.zip.
Choose yes to all the questions. If it has an error, reboot and try again or try it on a Goldcard.
Now fastboot should work and you can do whatever.
Click to expand...
Click to collapse
im having a similar problem i get stuck at the mytouch 3g screen then it try's to reboot
sapphire pvt 32b ship s-off g
hboot-1.33.0013(sapp******)
cpld10
radio-2.22.28.25
thats the fast boot mode stuff what can i do please help

iphreek said:
im having a similar problem i get stuck at the mytouch 3g screen then it try's to reboot
sapphire pvt 32b ship s-off g
hboot-1.33.0013(sapp******)
cpld10
radio-2.22.28.25
thats the fast boot mode stuff what can i do please help
Click to expand...
Click to collapse
1.33.0013 is perfected SPL, remote commands are disabled in this hboot.
If you have custom recovery (AmonRa or Clockworkmod), then you are lucky.
If not, then you must install official ROM: 3.12.531.1 T-Mobile USA FRG83D
http://www.4shared.com/file/j64ygA9t/RUU_Sapphire_T-Mobile_US_31253.html
After that, you can root phone with SuperOneClick, then install custom recovery, and custom rom (via custom recovery)

I already rooted using superone click but my phone wont boot after I tried to flash a rom how do I get it to boot up and work again I'm freaking out oh an I have clockwork recorvery image that's how I tried to flash the rom but i dont have a goldcard can i still use the same method can u give me a walk through or is there a way using clockwork mod

iphreek said:
I already rooted using superone click but my phone wont boot after I tried to flash a rom how do I get it to boot up and work again I'm freaking out oh an I have clockwork recorvery image that's how I tried to flash the rom but i dont have a goldcard can i still use the same method can u give me a walk through or is there a way using clockwork mod
Click to expand...
Click to collapse
If you have custom recovery - just flash custom rom via it.
P.s. but choose appropriate rom (with tags 32b)
Sent from my A7-040 using Tapatalk