So I guess it really is easy to brick a MT3G - can't fastboot, can't enter recovery.
Just stays on the MT3G boot screen.
I've tried all the boot key combinations, does anyone have any magic solutions that may work?
It was rooted just fine (from the first day rooting was discovered, using the gold card method). Tried to upgrade to a CyanogenMod, and somehow messed things up. I suspect I screwed up when I flashed the radio.
Hmph.
Why did you flash a "new" radio...?
The radio that comes standard as a packaged feature for the T-Mobile USA version of the HTC Sapphire (MT3G) is 2.22.19.26I - there was NO NEED for that adjustment. I'm not suggesting that flashing a new radio is what corrupted your device, but it certainly could have contributed to the eventual cause.
The One-Click Root Method is the safest way (until patched via Google 1.6 build - also known as Donut) to ROOT your MyTouch. I've used that for three various Android devices, all of which functioned properly immediately after. No flashing of upgraded radios, SPLs, etc.
Finally, from the beginning - as any ROM flasher should know, you SHOULD HAVE backed up your STANDARD, T-MOBILE PROVIDED, Cupcake v1.5 build using NANDROID from the Recovery image. If that is the case, restore those settings and start all over with the "rooting" process using the One-Click method via the Recovery Flasher application.
Good luck.
damn i think i brick my phone after loading a radio ugh it sux
Again.
Tobi87 said:
damn i think i brick my phone after loading a radio ugh it sux
Click to expand...
Click to collapse
Re-read what I posted previously.
The MyTouch comes standard with the latest radio and and SPL (even if considered PERFECT) doesn't prevent you from running any of Cyanogen's latest builds. I don't see why you thought that flashing a "new" radio was going to do something special. As for the "Gold Card" method...I don't see why you didn't think to try the easier, safer, much less work type of method. THE ONE-CLICK ROOT METHOD!
I'm a little confused on some of the specifics of SPLs.
When I rooted my MT3G I used the one-click method and didn't have to worry about doing anything with the SPL.
I'd like to try some of the other ROMs out there - but I see that they either require an Engineering SPL or the Death/Danger SPL. I know that the SPL changes the partitions on the internal memory of the phone - but I can't seem to find any info on what those new sizes are.
I've been told that the D/D is an Engineering one - but that I don't need it? So I'm a little on the confused side now.
Can someone help me get some clarity?
Your spl is not a Eng one it's a Perfected spl.
Try using the goldcard method http://forum.xda-developers.com/showthread.php?t=548218
silvertag said:
Your spl is not a Eng one it's a Perfected spl.
Try using the goldcard method http://forum.xda-developers.com/showthread.php?t=548218
Click to expand...
Click to collapse
1.33.0006 is a perfected SPL but as they stated, they're already rooted. Luckily with that SPL you can still use the one-click method. Ignore this post about using the goldcard method.
Eng and Death/Danger SPLs increase your internal ROM, allowing you to flash larger custom ROMs onto your phone. However, you have a MT3G which has much more internal ROM space than the G1, so you DONT need to flash an Eng or Death/Danger SPL. Doing so will only increase you chances of bricking your phone. One bad flash and your screwed. So, if you already have a custom recovery installed, find a custom rom that looks good to you, boot into recovery, perform a full wipe, and flash the rom. However, make sure you pay attention to rom specific installation instructions before you flash it. Some will require that you flash the DRC83_defanged_base.zip before flashing for legal issues, and others, mainly eclair roms, will require you to partition your SD card. Good luck! Also, I recommend using Super D, its a great rom!
Thanks sombionix!
Yeah, I used the one-click method about a week after I got the phone and have been rocking the current CM and A-Ra recovery ever since... this was late 2009.
So...
If something says it needs an Eng/D/D SPL I can ignore that and try flashing anyways? The perfected SPL that you and I have is pretty much an all-purpose SPL (for lack of a better term)? The worst that will happen is that it won't work and I can just restore a BART save of my current working CM?
Damn us geeks for being so fickle.
tsheeley said:
Thanks sombionix!
If something says it needs an Eng/D/D SPL I can ignore that and try flashing anyways?
Click to expand...
Click to collapse
Pretty much. Most of the ROMs I use are for the G1, which has a smaller partition than the default MT3G. The SPL is what changes this, so if the G1 requires a different SPL, chances are it'll still work fine on the MT3G.
Awesome!
Thanks somb & cougar for the help! I'll be doing some happy flashing sometime in the near future.
The G1's original SPL, and the Engineering SPL and Hard SPL, had less onboard space to store ROMs. The Magic has more onboard space, so Haykuro took the Magic's SPL and backported it to the G1.
This was called the Danger SPL or Death SPL as you needed to be running the latest radio for it to work. Many people did not work this out till later and bricked their G1s. Now we know this, so flashing Danger SPL is not really dangerous at all.
Every Magic already has as much space as a G1 with Danger SPL, so Magic users can use any ROM marked "Danger SPL" without concern.
Hello all, thank you for this great resource and any insight you can provide.
I need some of your wisdom, as I've been banging my head against a brick wall for about two weeks now, trying to root my T-Mobile MyTouch 1.2 (HTC Magic) with the 3.5" jack.
I did a couple hours of homework and began the process, but currently am stuck at the HTC Magic splash screen on normal boot up. I cannot boot into recovery; I have tried flashing both the Amon Ra versions, H and G. I can, however, boot into hboot and fastboot menu options, so it my understanding that my phone is salvageable with the right tools and process. Unfortunately, I was given bad advice—or incorrectly followed good advice—and now all the instructions I find to restore functionality to my phone don't go smoothly.
I've spent countless hours trying proposed found threads here (mostly) and other resources, but while the solutions sound like the apply to my hardware, they fail to complete successfully.
I have created two goldcards, both appear to work, as I have been able to flash a sappimg.zip image initially, but currently trying to flash again to remedy problems hangs and requires me to pull the battery. It usually hangs at the initial unzipping or at updating radio_v2. Via fastboot, I have been able to flash the stock hboot.nbo and reflash different versions. I was able to flash to the stock radio once, but have had problems trying to reflash images, trying to correct the issue.
These details have read different things at different stages in trying proposed solutions, but currently the info on fastboot menu reads:
SAPPHIRE UNKNOWN 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP31000)
CPLD-13
RADIO-6.35.10.18
At this moment, I've stopped trying to find answers on the forum because I've spent countless hours failing and more importantly, fear that if I continue applying incorrect solutions, I will irreversibly damage my phone. I hope that someone can provide some advice tailored to my situation.
Thank you for reading and for your reply. I understand that any advice I receive is at my own risk to follow.
Option one: flash the .nbo file for te engineerings 1.33.2010 spl and thz flash the g recovery.
Option two: flash the sappimg to revert back to stock then stsrt all over again
Option three: flash the stock sappimg and stay at stock thanking jesus you didnt **** anything up.
Sent from my HTC Magic using XDA App
You did not read the mytouch 1.2 rooting guide correctly. This phone can only run stock spl and radio. Read the guide at the unlockr. After using the goldcard you should have flashed stock spl and radio using fastboot.
NetrixTardis said:
You did not read the mytouch 1.2 rooting guide correctly. This phone can only run stock spl and radio. Read the guide at the unlockr. After using the goldcard you should have flashed stock spl and radio using fastboot.
Click to expand...
Click to collapse
I tried the files and process indicated on Unlockr several times. The files and process located here: theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
Attempting again, just now, I run into the same roadblock as reported in my initial post: Immediately after clicking the action button to execute the update, the process hangs at 'Unzipping' on step [1] SYSTEM, where the progress bar never moves, and pulling the battery is the only thing that works (unfortunately, since I'm warned not to power off the device!).
knny1491 said:
Option one: flash the .nbo file for te engineerings 1.33.2010 spl and thz flash the g recovery.
Click to expand...
Click to collapse
Thank you so much for your response.
Attempting option 1, I get the following messaging in the terminal while trying to flash the hboot.img (not nb0, is this wrong?) downloaded from the 'Magic SPL HBOOT collection' thread located here: forum.xda-developers.com/showthread.php?t=529019
sending 'hboot' (512 KB)... OKAY
writing 'hboot'... INFOsignature checking...
FAILED (remote: signature verify fail)
In the previous reply to another helpful commenter I describe another error I get while attempting to update the sappimg provided by Unlockr.
Further insight is very much appreciated.
so this is the second time I'm seeing this exact problem... this is keeping me from rooting this mytouch. but last time i saw this problem I believe it was solved.. i can't remember where i saw it though! I'll look and look until i find it then i'll post it here!
but in the mean time you can try unrooting it until the problem is solved?
http://forum.xda-developers.com/showthread.php?t=665814
lbsk8addict said:
last time i saw this problem I believe it was solved.. i can't remember where i saw it though! I'll look and look until i find it then i'll post it here!
Click to expand...
Click to collapse
Thank you! I hope that you do.
lbsk8addict said:
but in the mean time you can try unrooting it until the problem is solved?
forum.xda-developers.com/showthread.php?t=665814
Click to expand...
Click to collapse
I've visited that thread before in my days of lurking, but didn't attempt it (I don't think—I've tried so many things, it's hard to remember fully at this point).
I think all I have right now are goldcards. I hope a stock SD card isn't needed, or I'll have to figure out how to restore a Kingston microSD or buy another.
Thanks again for all of your input.
lbsk8addict said:
but in the mean time you can try unrooting it until the problem is solved?
forum.xda-developers.com/showthread.php?t=665814
Click to expand...
Click to collapse
Follow up, attempting to update to MT3G 1.2 Sappimg (BUILD# 2.10.531.4) downloaded via that link, I encounter the second error documented in my initial post, the update process hangs at updating step [2] RADIO_V2. The red progress bar stops at about 95%. Pulling the battery out is the only way to escape.
I think, and this is just a gut-level guess, that my problem stems from a corrupt radio version. Any one have an opinion or advice about that?
After pulling the battery and booting back into fastboot, my versioning reads as follows:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO 6.35.10.18
You have a 32a radio with a 32b spl, during the root process you are supposed to be able to revert that. What we need to do is get you onto an eng spl so you can fastboot erase radio, fastboot flash radio, then flash the correct hboot aka the stock one. Right now you cant fastboot or anything aka you are semi bricked. Only thing i can say is let it sit o the charger for as long as possible for the sappimg update and pray lots n lots.
Sent from my HTC Magic using XDA App
knny1491 said:
You have a 32a radio with a 32b spl, during the root process you are supposed to be able to revert that.
Click to expand...
Click to collapse
Thank you so much for the follow up. I wish the news were better!
How can you tell that I have a 32b SPL? By the errors I'm experiencing? The SAPP310000? Just guesses here. I don't see that on my phone so, I'm curious to learn.
knny1491 said:
What we need to do is get you onto an eng spl so you can fastboot erase radio, fastboot flash radio, then flash the correct hboot aka the stock one. Right now you cant fastboot or anything aka you are semi bricked. Only thing i can say is let it sit o the charger for as long as possible for the sappimg update and pray lots n lots.
Click to expand...
Click to collapse
Are you advising my to sit on my hands, keeping my phone charged, until, hopefully, the development community comes up with a new sappimg solution? Or are you saying to preform the 1.33.2010 engineering SPL update until success or my phone dies?
I was stating to do the update where it freezes or hangs on the radio and let it sit for a crazy amount of time with praers, the spl version is defing by the numbers i the 1.33.0013 etc area, 32a users have 1.76.xxxx sp numbers while 32b users have 1.33.xxxx and after looking i see you are on the stouch 1.2 spl which is why fastbooting anything will not work. Quick question though did you try flashing te spl and radio BEFORE the recovery?
Sent from my HTC Magic using XDA App
knny1491 said:
I was stating to do the update where it freezes or hangs on the radio and let it sit for a crazy amount of time with praers, the spl version is defing by the numbers i the 1.33.0013 etc area, 32a users have 1.76.xxxx sp numbers while 32b users have 1.33.xxxx and after looking i see you are on the stouch 1.2 spl which is why fastbooting anything will not work.
Click to expand...
Click to collapse
Thank you for the reply. Good to know, as I was under the impression that all T-Mobile MyTouch 1.2 phones were 32A, and 1.33.0013 was the desired and appropriate version for 32A.
knny1491 said:
Quick question though did you try flashing te spl and radio BEFORE the recovery
Click to expand...
Click to collapse
I initially tried followed the procedure here: http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Fender/1.2
Where, I updated the SAPPIMG via goldcard, then through fastboot, I flashed the radio, hboot, and recovery. But, I wasn't able to boot to recovery after that process, for whatever reason, so I began trying other procedures from other sources, which in all likelihood took me further away from the solution instead of closer.
If the current attempt of updating radio_v2 until success or power battery dies (which has been hung for about 30 minutes so far) does not end successfully, should I try flashing a different hboot or radio? Or any other suggestions?
Thanks again for your continued help. I'm going to try to get some more attention to this thread to hopefully get more possible solutions.
If the radio doesnt flash then we have to question why the recovery didnt load, the g version is the correct version given there is only one spl for us 1.2 users and it is a google spl. That is why you flash radio then spl then recovery in that order so nothing messes up. The thing is you have to flash a radio before spl, yet you hav the spl yet NOT THE RADIO which leaves me to believe you accidentalky did the spl first n not the radio first.
Sent from my HTC Magic using XDA App
knny1491 said:
If the radio doesnt flash then we have to question why the recovery didnt load, the g version is the correct version given there is only one spl for us 1.2 users and it is a google spl. That is why you flash radio then spl then recovery in that order so nothing messes up. The thing is you have to flash a radio before spl, yet you hav the spl yet NOT THE RADIO which leaves me to believe you accidentalky did the spl first n not the radio first.
Click to expand...
Click to collapse
Okay, thanks so much for the continued insight.
I think, I flashed the radio down to original, but encountered some problem, misdiagnosed it, and flashed it back up again. Now it's been about 3 weeks of messing with this phone for a couple hours a day, so, unfortunately, it's hard to remember all that I've tried. If what you're saying is true, then yes, I must have accidentally flashed the SPL before the radio. Is there a remedy for this? I've been pouring over this forum searching for "can't flash radio" (forum.xda-developers.com/search.php?searchid=39519193&pp=25&page=1) and so far I've read people claiming to have had successfully deleting their radios completely and reinstalling. Is this an option? Any other suggestions?
I will PayPal $30 to you, anyone who can give me a solution to where this phone is working and rooted. Alternatively, I live in Los Angeles, if anyone can recommend a good, knowledgeable, phone repair shop.
it's really strange why that didn't work for you.
My steps were as follows:
**make sure phone is fully charged**
pre 1) create goldcard
1) place sappimg.zip on gold card
2) boot phone with goldcard to flash using Vold down + power
3) let it reboot - should boot up to the "htc magic" logo -- for me it never loaded back up to stock 1.6, I had to pull the battery.
4) boot to fastboot using back + power
5) connect phone to PC and verified it was recognized using "fastboot devices"
6) make sure you have stock radio and spl in your Android SDK's \tools
7) performed the following:
fastboot flash radio radio.img (or whatever the filename you have for the stock radio)
fastboot flash hboot hboot.nb0 (or whatever the filename you have for the stock hboot)
fastboot flash recovery recovery.img (or whatever the filename you have for amon_ra or clockwork or cm recovery)
fastboot reboot-bootloader (to make sure that stock radio and SPL are loaded again)
8) reboot to recovery using home+power
*from this point on, you no longer need to use your goldcard
9) have new ROM .zip on root of your SD card, option flash from zip
10) ???
11) profit
NetrixTardis said:
it's really strange why that didn't work for you.
My steps were as follows:
**make sure phone is fully charged**
pre 1) create goldcard
1) place sappimg.zip on gold card
2) boot phone with goldcard to flash using Vold down + power
Click to expand...
Click to collapse
Thank you for your continued feedback!
I think you've listed the standard recipe for rooting this phone. I believe you. Unfortunately, something in my phone has gone askew (certainly my error) at this point and the "standard" just isn't working now. As is, and for the past 3 weeks, the process you describe dies at step 2. It hangs while updating RADIO_v2 (at whatever position in the list of updates it is for a given SAPPIMG file). Also, attempting to flash a stock radio.img via fastboot also hangs. Both updates send just fine, but hang at updating around 95%.
I've also been getting some advice from another member, knny1491. On this page, above, you'll see he hypothesises what my error is:
knny1491 said:
If the radio doesnt flash then we have to question why the recovery didnt load, the g version is the correct version given there is only one spl for us 1.2 users and it is a google spl. That is why you flash radio then spl then recovery in that order so nothing messes up. The thing is you have to flash a radio before spl, yet you hav the spl yet NOT THE RADIO which leaves me to believe you accidentalky did the spl first n not the radio first.
Click to expand...
Click to collapse
That sounds plausible that I did flash things in the wrong order. I'll accept that. I've been messing with it so much, I'm lucky it works at all. So now, and still, my question is where to go from here? Do you know anything about this radio/SPL relationship and how to remedy this current conflict, NetrixTardis?
Thanks again.
Possibly try to re download the sappimg from the mgic spl thread?
I was just thinking, if your goal at this point is to have the phone usable again regardless of root; why not try the RUU exe ? If i unserstand what it does, it should flash the phone back to stock (radio, spl, recovery,ROM etc). You'll have a phone as if you just unboxed it.
Thats if i understand what the ROM Upgrade Utility (RUU) does correctly. Someone should be able to correct me...
NetrixTardis said:
I was just thinking, if your goal at this point is to have the phone usable again regardless of root; why not try the RUU exe ? If i unserstand what it does, it should flash the phone back to stock (radio, spl, recovery,ROM etc). You'll have a phone as if you just unboxed it.
Thats if i understand what the ROM Upgrade Utility (RUU) does correctly. Someone should be able to correct me...
Click to expand...
Click to collapse
Thanks for the idea! I'll do some research on that. If anyone else can give any insight into if this may help restore my phone, please chime in!
I'd like root, but anything that gets the basic utility of the phone back would be great at this point (I've been using a old razr as a replacement while mine is hosed). I think an official 2.2 update is coming out from T-Mobile soon. I can wait for that.
NetrixTardis said:
Thats if i understand what the ROM Upgrade Utility (RUU) does correctly. Someone should be able to correct me...
Click to expand...
Click to collapse
If this is a good potential solution, could someone please direct me to which RUU to use? I've located the "[ROM] Official HTC Sapphire/Magic/MT3G RUU ROM Links" thread here: forum.xda-developers.com/showthread.php?t=659403
There really is a great abundance of options. I'm guessing I should go for the latest [MT3G 1.2] download which is:
36) [xda-ftp] [4shared] 2.10.531.4 T-Mobile USA DRD35
36) 2.10.531.4 1.33.0013G 2.22.23.02 N T-MOB010
I'll want a few hours or perhaps a day before attempting this process, in hopes that some helpful reader will provide his input if this is a good or bad thing to do as far as getting the phone working again.
Thanks!
Hi I'm new here and I'm new at rooting my phone and such.
I've been reading a lot about rooting and creating goldcards and installing roms and I've Finally managed to actually root and install a rom on my phone.
now I started out from a situation were I had what I think was called a perfect spl I had the 1.33.0010 on my phone. now I have a 1.76.0008. personally I'm annoyed tried the android 2.2 and couldn't make it work then tried another one android 2.1 with UISense and it worked now I don't mind having UISense but I'd rather have 2.2 I read somewhere that changing the spl could make some roms work but haven't been able to change the spl at all. and I don't really like one of the ways I read cause it involved some thing were you erased the through fastboot.
However a friend of mine have the 1.33.0009 and we can't change that at all We have tried to may things to say by now and we have been able to put another rom on his phone.
Now my question is what advantages does it give to actually change the spl I understood it was something about which roms can be used or am I totally wrong here ?
And the second question How do I proceed if the reasons for changing the spl is overwhelming.
And preferable explained in a way that makes me comfortable with trying it. I don't like doing dangerous things if I have Any questions about how or were with it.
and please do ask if there is information I didn't give that is needed to answer my questions.
I've used some time today because I was annoyed I couldn't change my spl.
keep in mind I allready have a custom 2.1 rom with UISense in my phone.
and my information of my current spl is:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008(SAPP10000)
CPLD-12
radio-6.35.08.29
and my current recovery is :
recovery-RA-hero-v1.6.2.img
so what I did was this:
Download update-hboot-1.76.2007-signed.zip, rename it to update.zip and copy to my sdcard.
Turn Off the phone.
- Restart the phone with press HOME+POWER go to recovery page.
- Choose Flash zip from sdcard option, choose “update.zip“, use trackball to select , press HOME to confirm
what am I doing wrong. =?
last I would like to apologizes if my question is a often asked question but as far as I've read now the answers often change or there are several answers on same issues and that makes me uncomfortable.
I am not sure if flashing an update.zip from recovery works for the SPL. I think the instructions are to flash from fastboot.
Have you tried flashing it in fastboot as per Cursor's post?
http://forum.xda-developers.com/showthread.php?t=605239
http://forum.xda-developers.com/showthread.php?t=594504
From what I can read there I must say I have not tried it Since I've been warned so many places that changing the spl through fastboot have a higher risk of giving me a brick phone.
And all the places I've been through so far claims that it is posible to do through the recovery mode and much safer. however for me it so far doesn't seem to work either because I'm doing something wrong.
another thing is I don't want to do risky things when I don't completely understand what is happening.
I know that the fastboot(also called bootloader) is the most risky thing to change.
I also understand why it's so risky. I've read through a lot of post. here and other places because I wanted to be sure before I started and it did went well with one exception I have now a 2.1 android on my phone with root access. but I'd like to change the spl in to a engineering spl since I've heard it enables me to try a wider variety of roms.
have I really misunderstood those post and blogs so much that it can't be done to change the spl without useing fastboot ?
my Great place of comfort was the wiki of this site but it have been down for some time. whenever I needed to know things I mostly went there to learn them.
The only possible way to change a SPL of a phone from stock to engineering is to flash it from a recovery in form of an update.zip . The name of the actual .zip does not matter.
Fastboot flashing is the most secure, if you heard otherwise your sources were wrong.
Also fastboot, bootloader, hboot and SPL are the same thing. (fastboot and bootloader being the interface visible on the phone)
Another false thing that you heard was that an engineering SPL will allow you to use a wider variety of ROMs. That is only true for the G1 and its Danger SPL. With your current SPL you can flash and use ANY new radio ROM.
P.S where you are standing now you cannot flash anything from fastboot - your S-ON SPL disables that option.
problem is if you flash an SPL via recovery, it will often try to boot back into recovery, which can be a problem since the new spl may be incompatible with your old recovery image, for instance some SPL images will flash a new radio, etc.
if you can manage a goldcard the best way to get out of a perfected SPL is detailed here
from there you will have an engineerings spl with which you can use fastboot and flash any other spl your heart desires.
Are you kidding me? An SPL will flash another radio?
You are right about one thing - it does involve risk to flash SPL from the recovery.
I see well thanks for clearing that up for me
so from what I understand I can use any rom with my current spl ?
which would mean I don't need to flash any other spl on to it correct ?
then I don't understand why the CM6 - FroyoRedux Mod v1.2 rom doesn't work on mine.
the S-ON thing means security on but what does that exactly mean.
Does it mean that I can't do anything in fastboot ?
Because I thought that it just made it impossible to downgrade the spl ?
okay I've been reading up on the wiki site now and I think I've answered my own questions.
just to be clear ! that I havn't missunderstood anything I'm gonna make a few statemens here please correct me if I'm wrong in any of them.
1. Spl is not needed to be changed to install any android system rom's once I've got a recovery ROM like for instance Amon_RA's recovery roms.
2 As I understand the recovery rom in my phone have to be capable of running on my specific spl
I tried magic specific recovery roms and ended up with a hero specific recovery rom because it was the only one that worked.
3. Now if I want any android system roms they have to be combatible with that recovery rom or am I still missunderstanding something here ?
Exactly which recovery image did you flash? The ROM's are specific to the SPL stuff (bootloader, radio, mainboard, etc.) not the recovery.
Radios
Ok, I understand also. But it still does not clear up if the MT3G 1.2 can use any other SPL/Radio combonation. Can this be done yet with this device?
Looking at your fastboot info, you don't have the MT3G 1.2, that's the one with the 3.5mm jack. You need to find a ROM specific to your radio. If you look through the ROM bible in the Devlopment Section, there's plenty of ROM's in there that are for the 32A board and 6.35 radio.
DonJuan692006 said:
Exactly which recovery image did you flash? The ROM's are specific to the SPL stuff (bootloader, radio, mainboard, etc.) not the recovery.
Click to expand...
Click to collapse
well at the moment I'm using recovery-RA-hero-v1.6.2.img because it's the only one that seems stable with my current spl.
and it seems I have some troubles with flashing a eng spl but it seems that what I understand I should just find a rom that works on my phone instead of thinking it's the spl that is a problem. I have found 2 roms that works but one is slow and the other is unstable so I'm still searching.
But I want to say thanks to everyone who have helped making me understand this just a bit more.
MyTouch3G [32b]
(Sapphire/Magic/ -MT3G)
"ORIGINAL"
ok i'v read alot on this but still getting mixxed results... my last research was on the wiki
FIRST: my concerns are SPL N RADIO spec's for "FROYO" (CM6 RC-NightlyBuilds)
iv ran engineering 1.33.2005 SPL
W/ BOTH - 2.22.19.26i and 2.22.23.02 RADIOS
now seeing there is a new SPL HBOOT "1.33.2010"
R We suppose to UPGRade? or even just FLash in general?
(take note: i am a graphic designer, so i perfer to make changes to boot-ups)
* -the wiki on sapphire hacking states
-"For T-Mobile MyTouch 3G or PVT32B Magics, it is reccommended you use the 1.33.2005 engineering SPL."
i couldnt find any date that this was posted so here i ask.
as for radio's both seem to work the same i suppose.... but i beailve updates r updates for a reason right?
I Have recently Unrooted to fix any issues,erase,etc the past years worth of crumbles n jumples that could be floating around somewhere outthere... hah.
as for unrooting it changed my radio back to 2.22.19.26i / n hboot to 1.33.0006
n yes i am currently rerooted with the same radio n hboot listed above. im currently on froyo cm6 rc3 nightly....
also my other issue in needing to despratley know what the sd partitioning should be for the cm6 nightly froyo builds...
im currently 96/512/ex2-3-ex4
reasoning in asking is because i do feel like there is lagging or strain somewhere on the device yett this could be the issues of froyo or the rom itself.
but these issues r in no way dramatic. i just want to know what the legit correccct proper scoop is on this shizzit. once again iv done the reading over n over again. but the dates r back from cm5 in 2009. so im wanting up to speed on 2010 information seeing that i cant seem to find.
also * clockwork recovery or amon RA recovery *
which is a better route for mt3g... personally im happy with amonRA's clean recovery work. but im just wanting to know the deali-O.
your help is greatly appreciated...
You can flash SPL 1.33.2010 to your MT3G, I just did that last week (from whatever came stock with the device, prevented me from using fastboot). I also flashed the radio to the newest version (2.22.23.02) and now get slightly-better reception (I think, anyway).
I like Amon Ra better than Clockwork. I tried installing Clockwork once and my phone refused to boot into recovery (stuck at mt3g screen), so I avoid it like the plague.
As for partitioning, I just leave my entire card FAT and use "Swapper2" to create a swap file. Works just fine, and without the hastle of partitioning (we are talking about swap, right?)
Are there any issues in installing Clockwork recovery over amonRa? I have a rooted MT3g 1.2 with amonRa, but would like to use ROM Manager (requries Clockwork). Did you use Rom Manager to install Clockwork?
jdbuddy said:
Are there any issues in installing Clockwork recovery over amonRa? I have a rooted MT3g 1.2 with amonRa, but would like to use ROM Manager (requries Clockwork). Did you use Rom Manager to install Clockwork?
Click to expand...
Click to collapse
It can be done but from my experience it was not good Amon_Ra is more stable in my opinion i would have problems with clockwork. For instance with the MyTouch 1.2 I had to flash manually then tell recovery manager that I did and it will work. Both recoveries are excellent its just a matter of opinion and personal choice.