Related
Nothing too big. I've searched everywhere on this and apparently this is supposed to work, but:
I can't get Live Wallpapers to work
and I can't get the Nexus Launcher to work. Both of these just force close.
Oh, and how do I use Apps2sd? Its greyed out in the settings menu and I can't touch it. Thanks in advance.
All of this has already been answered. Just search the thread of the rom you are using. I promise, its in there.
Thanks haha. Should've done that. But I didn't get anything answered on the Nexus Launcher. It just keeps force closing. Would you choose ADW or Nexus?
Hey Nikolai, what ROM did you use? I've been really busy with a new job and didn't want to get crazy after (finally) rooting, so I went with Ivan's 1.0 ROM. It's essentially the basic Verizon setup without the junk, and overclocking. Apps2SD doesn't work...grrr.
I'd like to try something with Apps2SD and Live wallpapers, but I don't want anything buggy.
Nikolai2.1 said:
Thanks haha. Should've done that. But I didn't get anything answered on the Nexus Launcher. It just keeps force closing. Would you choose ADW or Nexus?
Click to expand...
Click to collapse
Launcher Pro is a lot faster than both of those. I would choose that.
im just wondering. now that im rooted what specific apps do you guys reccomend? i have Fresh Rom installed with overclocking just curious what other utilities i should get
A2SD has to have the SD card partitioned. You can do this in the Recovery menu where you flash new ROMS. It will erase everything so make a backup of what you want from your SD Card first then in the partitioning setup it ask for a swap and ext3 size default it is 32mb for swap and 512mb for ext3. After that you should be able to turn A2SD on.
If you choose, and shortly after you turn A2SD on you will, to stop using A2SD repeat the same steps for partitioning the SD card but when you are asked sizes scroll the track ball down till it is 0 for both swap and ext3.
I don't like it because I don't feel like buying a Class 4 SD card or higher to make it worth while. If you are using the stock SD card you got with the phone it will make your phone boot slower and take longer to access the Apps.
I don't know what ROM you are using but the KaosFroyo ROM is a great ROM it is small and that will save you more room for apps if that is what you are looking for.
this thread has nothing to do with development for the eris. can someone please move this to general?
lostpilot28 said:
Hey Nikolai, what ROM did you use? I've been really busy with a new job and didn't want to get crazy after (finally) rooting, so I went with Ivan's 1.0 ROM. It's essentially the basic Verizon setup without the junk, and overclocking. Apps2SD doesn't work...grrr.
I'd like to try something with Apps2SD and Live wallpapers, but I don't want anything buggy.
Click to expand...
Click to collapse
I was on eris lightning bolt but i just switched over to ic3rom
Oh and can someone please explain to me what a MAPS rom is? I got the ic3rom lwp version but i dont know the difference
morphius2036 said:
A2SD has to have the SD card partitioned. You can do this in the Recovery menu where you flash new ROMS. It will erase everything so make a backup of what you want from your SD Card first then in the partitioning setup it ask for a swap and ext3 size default it is 32mb for swap and 512mb for ext3. After that you should be able to turn A2SD on.
If you choose, and shortly after you turn A2SD on you will, to stop using A2SD repeat the same steps for partitioning the SD card but when you are asked sizes scroll the track ball down till it is 0 for both swap and ext3.
I don't like it because I don't feel like buying a Class 4 SD card or higher to make it worth while. If you are using the stock SD card you got with the phone it will make your phone boot slower and take longer to access the Apps.
I don't know what ROM you are using but the KaosFroyo ROM is a great ROM it is small and that will save you more room for apps if that is what you are looking for.
Click to expand...
Click to collapse
I think I know why apps2sd slowed down your phone. You selected 32mb for swap. I selected 0 for my swap and it's been fast on every apps2sd enabled rom I've used. I bought a class 6 sd card thinking it would make my phone even faster but that was joke. My wife's Eris has the stock class 2 card and I can't tell a difference in the speeds.
I also agree with LexusBrian400 above. Launcher Pro is my favorite launcher. Play around in the preferences for a bit. It has some cool options.
snyluc13 - You need setcpu (or some other app) to control the overclock. Do not set on boot until you have found a setting that wont lock your phone.
Nikolai2.1 said:
Oh and can someone please explain to me what a MAPS rom is? I got the ic3rom lwp version but i dont know the difference
Click to expand...
Click to collapse
Without some trickery and some tweaking, you can either get nav(maps version) and no lwp or lwp and no nav (working that is)
I have searched diligently and have yet to find specific instruction for creating a bootable SD card for my NC with MIUI Nook Color 1.9.16 (or any version of MIUI for that matter).
I am currently running a fully rooted version of 1.3 on the emmc and "all is well" and I need it left that way so as to continue having access to "in store reading" which I use quite a bit.
Have previously had CM7 and Phiremod running both internally and on an SD card at various times and tried to do a previous version of MIUI on the card using the same process without any luck.
Thanks in advance.
You can use verygreens method here -
http://forum.xda-developers.com/showthread.php?t=1000957
Important part is to rename the miui zip like this -
'How to update to a new build:
put the new build you want to try on the first partition. (the name must be update-cm-*.zip or cm_encore_full*.zip or just update-*.zip)'
..and it should work fine
cheers,
Many thanks as that did the trick!
Loaded and running from SD card.
It installed/is using the new Market interface (3.1.3?).
Where are/is "My Apps" as I do not seem to be able to find it.
D/L Netflix and it runs just as it should but the soundlevel at max is quite a bit lower than on rooted 1.3.
Free Koi living wallpaper looks beautiful.
My Apps - strangely there isn't one, but this works nicely -
http://forum.xda-developers.com/showthread.php?t=1154299
Sound level - Download nook tweaks from market and change settings in that
Cheers,
What did you rename the MIUI file? I've tried it a couple different ways and checked the MD5's, but keep getting errors. Unless my SD card has been corrupted somehow (I used it for other SD boots before this, so not too likely), I can't think of anything else causing the problem.
Hi. I tried putting the MIUI zip in the root of the sd card and booted into recovery as stated. It was renamed as one of the cm7 updates and installation went as per normal. However, when I did boot up the nook was stuck looping the MIUI animation and did not finish. What did I do wrong?
PhoenixClaw said:
Hi. I tried putting the MIUI zip in the root of the sd card and booted into recovery as stated. It was renamed as one of the cm7 updates and installation went as per normal. However, when I did boot up the nook was stuck looping the MIUI animation and did not finish. What did I do wrong?
Click to expand...
Click to collapse
Maybe just didn't wait long enough... the first boot takes a long time since the update script clears cache and dalvik cache.
Of course... this is just a wild guess since you didn't provide a whole lot of information... more information may yeild different feedback.
DizzyDen said:
Maybe just didn't wait long enough... the first boot takes a long time since the update script clears cache and dalvik cache.
Of course... this is just a wild guess since you didn't provide a whole lot of information... more information may yeild different feedback.
Click to expand...
Click to collapse
What kind of information? My nook color originally had the latest CM7 nightly on the sd card. I followed verygreen's method when I installed that. I used the NC normally. Then, I followed this thread and applied verygreen's method. I downloaded the MIUI rom from the miui thread, renamed it like the cm7 nightly zip ("cm_encore_full-253.zip") and put it in the root of the sd card. I put the sd card back in and booted via recovery. It installed and shut down. I turned it on again, and reached the MIUI globe thing. It was looping and stuck there for 30 minutes.
I've been thinking of trying miui.
If anybody has got.it running from SD please give the step-by-step procedure for the rest of us.
Thanks
A search would show you....
http://forum.xda-developers.com/showthread.php?t=1271982&highlight=Miui+sd
I hate to revive a dead thread, but I have been trying everything I could read or download.
I am using the Size-agnostic installer from this thread: http://forum.xda-developers.com/showthread.php?t=1000957
I am trying to flash MIUI 1.9.16 (MIUI.us_encore_1.9.16_Eng_Deo_ZipA_Signed_andmer) (http://goo-inside.me/miui/encore/)
I successfully installed CM7 to this Sandisk Class4 16gig microSD. Every time I try to flash MIUI, I re-burn the size agnostic card image, copy over the cm7-renamed MIUI ROM, and boot.
The installer seems to work, just like my CM7 installs. Then, when I try to reboot, it goes back to the installer (linux penguin at the top, goes through the motions of trying to flash another rom, when not finding anything, it shuts down).
I know I am missing something simple.
Am I to install CM7, then MIUI on top of it (without reburning the card)? Am I just using an SD-incompatible ROM? For those who were successful, where did you download the ROM from?
I know I have lots of questions, I hope you guys see my effort (that I don't just want someone to give me a quick fix), and I thank you in advance for your help.
Kind regards!
harryzee said:
Many thanks as that did the trick!
Loaded and running from SD card.
It installed/is using the new Market interface (3.1.3?).
Click to expand...
Click to collapse
I'm certainly no expert, but I have flashed two different versions of MiUi to micro SD cards adn then worked fine. You do not need to do i over CM7. Like you, I prepared a clean SD and used the size agnostic procedure. I renamed the MiUi file to some that started with update-cm-
I got my MiUi file here:
http://roms.miui.us/
I used a program called SD Formatter to format the card.. then I used the 1.3 version installer. I sometimes had problems using winimage to create this sd card . You have to select the drive letter for the sd card and then use the "restore" choice on the menu.
David, thanks for your response. I had already wiped it and installed CM7, but when I saw your post, I gave MIUI one last try. I downloaded from that site, and BAM, it installed perfectly! Thanks heaps!
I have a brand new Nook Color the Software Version (in about my Nook) says 1.2.0. what is the easyest way to go about rooting? is there a specific version of CM7 that I should use? What is the best rooting method or system to use? I am totally new to all this so some step by step instructions or detailed informatio would be great!!! Thanks for all you guys help!!!
There are several decisions you need to make before you start. Do you want to have dual boot (meaning that you can switch between stock rom and another rom of your choosing? In these case you would be running the non stock rom from the sd card. Or, do you want to go full non stock rom (emmc)? There are different methods for each.
After you decide this, you need to decide which custom rom you would like. The most used are CM7, phiremod and MIUI. CM7 is the most update one and has a lot of following and development.
If like you mention on your post you are looking at using cm7, then I suggest you start with the latest stable version 7.1 (which was released a couple of days ago). You can find the files and instructions in this post and the detail instructions here
Hopefully this can help you, you could also look around in the android development section in the forums for further info and/or wait for more detailed info from more experienced rooter than me
Thanks for the Advise/ information, so if I go dual is it very complicated to switch from one to the other? is there an advantage to being able to switch back and forth? I currently have a 2gb sd card that should be big enough right? Once again thnks for the help..........
Does anyone else have input or feedback???
Just last week I installed CM7 on an SD card in my Nook Color. It's been great so far. I figure I'll try it on the SD card for a while before I do anything more permanent like installing to the internal memory.
When you install to the SD card, you boot back into the "stock" OS by just removing the card.
As for the size of your SD card, I think 2GB is large enough, but that depends on how many apps, etc. you plan to have on it.
When you install to the SD card, you boot back into the "stock" OS by just removing the card.
Click to expand...
Click to collapse
I would not recommend doing that. The Nook card slot is a little fragile and excessive swapping will likely damage it. Mine gave out and I rarely remove the card as I have CM7 on the eMMC and only use the card for backups and upgrades. I had a hell of a time restoring the stock ROM so I could return it under warranty. If you are going to run from the card, set it up for dual boot so that you just pick which ROM you want to use when you boot up.
Been searching for a while but am confused. Never needed to use my external SD on vibrant until recently. Now I have a question. I have two different ROM versions on my phone and I use ROM manager to keep them backed up and I use restore to go from one to the other.
The question is, now that I had to move some apps to my sd card (using Apps2SD), what happens when I switch ROMS by using restore?
Do I need two different partitions on the SD card, one for each ROM? If so how do I do this, and how do I know which partition each ROM will use?
I have read many warnings about partitioning using ROM Manager so I am kind of leary of using it.
Can anyone explain this to me? Never thought about it before because the Vibrant has so much memory available.
Thanks.
Any ideas?
I'm sure lots of people have done this before, just not me.
Can anyone explain this to me please?
Thanks in advance.
rblancrt said:
The question is, now that I had to move some apps to my sd card (using Apps2SD), what happens when I switch ROMS by using restore?
Do I need two different partitions on the SD card, one for each ROM? If so how do I do this, and how do I know which partition each ROM will use?
I have read many warnings about partitioning using ROM Manager so I am kind of leary of using it
Click to expand...
Click to collapse
I have NEVER heard good things about partitioning your SD card with ROM mgr. NOt sure why you would anyways. The internal is already partitioned anyway. That is why we have a phone marketed with 16gb internal but when you pull settings>sdcard it shows only 14gb. Where are the other 2gb at? There are already partitioned to put your apps there. Use Root Explored and go to /Data, /datadata/, /dalvik-cache and you'll notice that they are all the same size-nearly 2 gb. Viola!!!
As far as restoring. I don't use native App2sd but I know how it works. W/o getting too technical, it puts part of the app's apk (executable functions and data) in a folder called .androidsecure on your sdcard (if you want to view this folder, you have to plug into PC and make sure Hidden Files are viewable). Now to your question. Whenever I have backed up, I always see at the end when it is cycling through your partitons (/system, /data,...) it says something like "backing up .androidsecure"-file not found*b/c I don't use it is why it isn't found. So you can back that up if there is something in it, flash new ROM redownload your apps and move to App2sd, back up and when you restore it should restore the .androidsecure partition.
Sorry for the long response but you asked two questions there. Now for my question. How many friggin apps do you have to fill up everything and bleed over into the app2sd part too? Does your phone lag? How is battery life?
Using App 2 SD Pro
Perhaps I didn't give enough info, but I am using an app, called App 2 SD Pro, to move apps back and forth to and from SD card.
It shows Moveable = 98, on SD card = 17, and phone only = 98, so I suppose it have 213 if it is correct.
Thanks for the info about restoring. I will have to study your answer in more detail before I can give any more answers, or ask any further questions.
re download my apps
Part of your answer above was redownload my apps.
Don't want to do that. If I move some of my apps to the sd card using the app "App 2 SD Pro" and then do a backup using ROM manager, then restore another ROM using ROM Manager, which also has apps on the sd card, what happens to them?
I have done this and it seemed to me that some of the apps which had been moved to the sd card did not show up on the restored ROM.
This is why I asked about partitioning, maybe using one section of the external sd card for one ROM and one section for the other.
Hi,
I just bought a nook color. I'm trying to install nightly cm9 on it. i have been reading and i have some questions .. please help i don't wanna turn my new nook into paperweight lol. I understand i need to make a bootable sd card with CWR on it. i understand there are newer version CWR out there now but I am only able to find 4gb version of 3.0.2.8. Will that cause a problem ? Do i have to use 4gb version CWR? I can find 1gb CWM 3.2.0.1 ( i have a 4g micro sd card ). About wiping, i know with android phones you always wipe before you flash roms but i have been reading, posts suggest to wipe cach and dalvik AFTER flashing cm and gapps. Is that the correct order to wipe? [GUIDE] Install CM7 or CM9(!) + Clockworkmod to EMMC - ALL NOOKS! (Updated:1/16/12) - xda-developers This post don't even mention wiping dalvik. So what exactly should i wipe and in what order? Also in that post it says after you flash, without rebooting you are to remove sd card and format it on a computer... since its a bootable CRW, the nook color doesnt even have the recovery on it , will removing the sd just cause it to crush ? Please help ~ Thank you.
Best advice is to go to the "development forum" and read the CM9/ICS nightly thread.Everything you need is in the first post.I would suggest you test your SD card with CrystalDiskMark 3.0(free program,google it up)first to see if it is suitable for a ROM install.
See the SD card strange thread in this forum first.
Don't worry too much about bricking your Nook Color. It is pretty much impossible to get it in a state which you can't recover from as it has priority on booting from the SD card.
That's not say you shouldn't try to get it right to avoid any hassle.
For an internal install use the Eyeballer SD clockwork recovery method as detailed in the development forum. When you image this to an SD then you always end up with a 1GB partition on the card irrespective of the real SD size. Don't worry about that as this is just a staging post and you just need space to put on the zips you want to install.
For CM9 use the "unofficial" nightly builds and put the main ROM, Gapps, and the telephony permissions fix on.
When you boot from this card you will be in Clockwork recovery. First time you want to format system, data, and cache then install ROM, Gapps and telephony fix in that order.
After that you want to put in a cleanly formatted single partition SD card, either by reformatting partitioning the installation one or a different one if you wanted to keep the original. It won't crash but some apps expect the Sd card to be present.
Once rebooted then you should be in CM9. You can install clockwork recovery to the internal memory as well by using the ROM Manager app. This means that if you reboot with the N key held down you get into a boot menu and can choose to go into recovery. That is very convenient for subsequent updates as you can just copy zips onto the SD card via USB or Wifi without having to remove the card (ES File Explorr app helps a lot here).
For small updates you can normally just format system and cache then reapply the set of zips. This will leave your set up and installed apps alone. You don't need to do Dalvik separately as it is in the cache partition.
Thanks and what is the "telephony permission fix" ?
bobtidey said:
Don't worry too much about bricking your Nook Color. It is pretty much impossible to get it in a state which you can't recover from as it has priority on booting from the SD card.
That's not say you shouldn't try to get it right to avoid any hassle.
For an internal install use the Eyeballer SD clockwork recovery method as detailed in the development forum. When you image this to an SD then you always end up with a 1GB partition on the card irrespective of the real SD size. Don't worry about that as this is just a staging post and you just need space to put on the zips you want to install.
For CM9 use the "unofficial" nightly builds and put the main ROM, Gapps, and the telephony permissions fix on.
When you boot from this card you will be in Clockwork recovery. First time you want to format system, data, and cache then install ROM, Gapps and telephony fix in that order.
After that you want to put in a cleanly formatted single partition SD card, either by reformatting partitioning the installation one or a different one if you wanted to keep the original. It won't crash but some apps expect the Sd card to be present.
Once rebooted then you should be in CM9. You can install clockwork recovery to the internal memory as well by using the ROM Manager app. This means that if you reboot with the N key held down you get into a boot menu and can choose to go into recovery. That is very convenient for subsequent updates as you can just copy zips onto the SD card via USB or Wifi without having to remove the card (ES File Explorr app helps a lot here).
For small updates you can normally just format system and cache then reapply the set of zips. This will leave your set up and installed apps alone. You don't need to do Dalvik separately as it is in the cache partition.
Click to expand...
Click to collapse
Found the telephony fix thanks
A bit of unsolicited advice: if you are having these kinds of problems, then I suggest CM9 is not baked enough for you, and you may be much better off with a far more stable and better-documented CM7.x install. I am not being condescending... I myself am quite capable of extreme hacking and tolerant of an array of stability issues, being a Linux software engineer, but I just don't have the time or energy to put into making CM9 work right now, given the quantity of issues. For the hardcore Android hobbyist, CM9 is the way to go right now. For a NC user wanting a functional Android tablet, I say wait a little bit.
You might consider simply using the SD card boot ROM's, and leaving the internal Nook alone for the present. That would allow you to try out the various Rom's available and find one that works best for you. I'm currently running CM7.2 Kang on my emmc partition, but booting on SD card from the CM9 nightly builds. The CM7.2 Kang is quite stable, but not as much fun as the alpha ICS CM9 stuff. Best of both worlds.
I already have cm7 on my phone , hopefully its not gonna be the same thing lol . i was hoping to put cm9 on there so it will entertain me for a while but if its really that buggy mb i will consider just running on cm7.
mr72 said:
A bit of unsolicited advice: if you are having these kinds of problems, then I suggest CM9 is not baked enough for you, and you may be much better off with a far more stable and better-documented CM7.x install. I am not being condescending... I myself am quite capable of extreme hacking and tolerant of an array of stability issues, being a Linux software engineer, but I just don't have the time or energy to put into making CM9 work right now, given the quantity of issues. For the hardcore Android hobbyist, CM9 is the way to go right now. For a NC user wanting a functional Android tablet, I say wait a little bit.
Click to expand...
Click to collapse
Thanks. I already have bobzhome 7.2 on my phone. The reason why i wanna cm* on my nook is because i don't read(i read enough for school XD ) haha so the nook factory rom will be kinda pointless for me. Also just booting from sd and flashing roms seem really straight forward to me so that's why i want to flash cm* on internal memory. As im not that knowledgeble about nook colors, running on a bootable rom still seem complicated for me but i sure will think about it .
brentb636 said:
You might consider simply using the SD card boot ROM's, and leaving the internal Nook alone for the present. That would allow you to try out the various Rom's available and find one that works best for you. I'm currently running CM7.2 Kang on my emmc partition, but booting on SD card from the CM9 nightly builds. The CM7.2 Kang is quite stable, but not as much fun as the alpha ICS CM9 stuff. Best of both worlds.
Click to expand...
Click to collapse
when i was downloading cm7 roms , my anti virus kept saying there were viruses in the roms ... is that normal ?
optimusv45 said:
when i was downloading cm7 roms , my anti virus kept saying there were viruses in the roms ... is that normal ?
Click to expand...
Click to collapse
How many places you going to ask this?
It is a false positive.
Normal? No. Crappy antivirus? Yes.
As long as you are downloading from links from the developers here you're safe.
Sent from my NookColor using XDA App
just making sure since im not very knowledge about nook colors. i rather ask more than do something stupid on my device and cause myself problems.
Benzoman said:
How many places you going to ask this?
It is a false positive.
Normal? No. Crappy antivirus? Yes.
As long as you are downloading from links from the developers here you're safe.
Sent from my NookColor using XDA App
Click to expand...
Click to collapse
No problem. Just noticed it was in a separate thread already.
Please post what A/V you are talking about so others having the same issue will take note.
I'll also give a +1 to the people who suggested that you work off an SD card until you are really comfortable with the process. You can always recover your Nook, but why go through that hassle when the SD card is so easy.
Just my $.02
Dual booting SD
I agree with try the Dual boot off the SD card to see what you like. Check out http://forum.xda-developers.com/showthread.php?t=1000957Verygreens process was simple to follow and I am newer at rooting also. Cheers.
I posted what a/v already. its kaspersky internet security. i guess i never look into running off SD. I don't read much so i just don't need nook color stock ROM, i guess that's also part of why i wanna run on internal memory. oh and i bought a refurbished nook color from BNs website and it came defective. part of the screen didn't work. To those who wanna buy it from them i suggest to buy from a retail store so u don't have to pay shipping and waste time I think all they did was a factory restore on a return and sell it again for 149.
TL2000 said:
Please post what A/V you are talking about so others having the same issue will take note.
I'll also give a +1 to the people who suggested that you work off an SD card until you are really comfortable with the process. You can always recover your Nook, but why go through that hassle when the SD card is so easy.
Just my $.02
Click to expand...
Click to collapse
Im gonna buy a new nook color and i read that newer ones have different hardware. newer hardware aren't supported by CM7. I guess I'll have to try a nightly CM9 build.
The1Power said:
I agree with try the Dual boot off the SD card to see what you like. Check out http://forum.xda-developers.com/showthread.php?t=1000957Verygreens process was simple to follow and I am newer at rooting also. Cheers.
Click to expand...
Click to collapse
will CM7 work on a new nook color? i have read that it doesn't have some needed drivers.
mr72 said:
A bit of unsolicited advice: if you are having these kinds of problems, then I suggest CM9 is not baked enough for you, and you may be much better off with a far more stable and better-documented CM7.x install. I am not being condescending... I myself am quite capable of extreme hacking and tolerant of an array of stability issues, being a Linux software engineer, but I just don't have the time or energy to put into making CM9 work right now, given the quantity of issues. For the hardcore Android hobbyist, CM9 is the way to go right now. For a NC user wanting a functional Android tablet, I say wait a little bit.
Click to expand...
Click to collapse
optimusv45 said:
will CM7 work on a new nook color? i have read that it doesn't have some needed drivers.
Click to expand...
Click to collapse
I just bought my nook color Dec. 30th, 2011 and I have ran cm7 as well as cm9. Like the others are saying, set up cm7 off of a SD card until you learn what you are doing then consider moving to the emmc.
optimusv45 said:
will CM7 work on a new nook color? i have read that it doesn't have some needed drivers.
Click to expand...
Click to collapse
I believe that is CM9, not 7 that was having issues with the new nook color touch screen drivers.
Here's a post about it:http://forum.xda-developers.com/showthread.php?p=21333209&highlight=touchscreen#post21333209
Looks like it may already be fixed: http://forum.xda-developers.com/showthread.php?p=21353661&highlight=touchscreen#post21353661