Related
Hey guys, I just got my 8525 a week ago, I'm still trying to get used to it. Overall i think i like it more then my TREO650 but i have one problem, i cant stand the small power button on the side. Most of the time i push it i push the slide keyboard out too, its so small i can never find it.
My old Treo650 had the power button and locking keys on the END button, when i push END it would lock and turn off the screen, to Unlock i would push END again and then the Center button. Is there any way to re-assign the Power button on the 8525 to be like my old Treo650?
Any suggestions guys. I am having the same problem with small power button
DAFTEK said:
its so small i can never find it.
Click to expand...
Click to collapse
sounds like a personal problem, maybe see a doctor?
On a serious note.. i dont think it can be reprogrammed via the software, i believe the power button is actually mapped via hardware since it is used for functions like putting the phone into bootloader mode, etc.. i could be wrong though.
Hey thanks for the reply although its my phone with the small problem I have tried two programs on the forum here called Devicelock.cab but that only locks the device but you still have to push power to power the phone back up.
I believe the power key can be reprogrammed in one or two highly invasive ways.
However, it doesn't sound like you want to re-assign the power key, but to assign the power off function to another key. Is that correct? That's easy/
If you want to assign the power on function, that is more complicated, but there are work arounds.
V
I agree with the original poster. The small power on/off button is poor design. When I want to place a call, I first need to turn the device on by hitting that very small button. Then I need to activate the phone app or invoke MS voice command. It's just plain poor design. I love my 8525, but it could be so much better if the product designers at HTC actually thought about the ergonomics of the tasks users do the most.
One more gripe. The phone app is atrocious. Getting to the recent dialed list or to toggle the speakerphone usually requires bringing up a menu. This is annoying for a phone and a better design could mitigate the poor usability. I/m not an iPhone fanboy but take a look at the thought Apple put in there *first* phone and it is quite illuminating on the state of PPC phones.
r111 said:
[...]Getting to the recent dialed list or to toggle the speakerphone usually requires bringing up a menu[...]
Click to expand...
Click to collapse
You could try scrollwheel up or D-pad up for recent call list .
(also down for speed-dials).
Maybe you could map a button for speakerphone, not sure though.
ovidiugm said:
Maybe you could map a button for speakerphone, not sure though.
Click to expand...
Click to collapse
The original poster could - while in a call - try pressing the green button for two or three seconds.
I think it's even mentioned in the manual...
Cheers
Daniel
Hello.
I agree with the previous posters. The badly placed powerOn button is "bad design". If anyone finds the sollution (to PowerON the device using another key) please share it!
Otherwise, this is a great device. A true pocket computer
Best regards, jZ
+1 for the poor design.
I always hit the power button as I am pulling it out of the case when a call comes in, that turns off the screen, then I have to hit it again to see who is calling, and with all that going on as well as the ringer, the phone has a minor anurism and delays in answering.....
So to summarise the poor design aspect of this thread:
1. The power button is too small/difficult to find and press.
2. The power button is too easy to press/find even by accident.
Conclusion, it's just about right then!!
You can't please all of the people all of the time.
Mike
1. The power button is too small/difficult to find and press.
2. The power button is too easy to press/find even by accident.
Click to expand...
Click to collapse
Sounds like the classic male/female dichotomy. I never can operate my wife's buttons, however obvious the functionality might seem....
V
vijay555 said:
Sounds like the classic male/female dichotomy. I never can operate my wife's buttons, however obvious the functionality might seem....
V
Click to expand...
Click to collapse
unfortunately i can operate my wife's buttons even when i dont want to.. talk about poor design )
Lol, Shogun, remind us again how many kids you have?
Ok, some Opus Dei style self flagellation for the errant moderators going off topic.
Is this issue now resolved?
V
I can also operate my wifes buttons just fine as well but all i want is to find out if i can move the power button to maybe the PPT button or END when holding it.
Daftek, again, do you want to emulate the power key functionality, (ie on/off) on another key, and/or entirely disable the original power key?
V
Thats what I would like to do......
Hello.
I think we'd all like to assign a DIFFERENT KEY to POWER ON function. POWER OFF is no problem, because a button for this can be assigned through "Buttons". When the phone is in "sleep mode", only the POWER button can wake it.
Any solutions?
Regards, jZ
IMHO, it's possible but not easily.
Easiest work around is to disable button locking, so that pressing any button can wake the device, and then use a software lock to timeout/power off if you happen to poke a hardware button while it's in your pocket.
Alternatively you could rewrite the button driver, but it's possible (although I've not looked into it definitively) that the hardware power button is a hardware interrupt to the CPU. In which case a software based solution will not override a hardware based connection.
V
This is what I did...
I totally agree the power button is a pain, the size, placement...
I know this sounds a bit weird but I took a small piece of plastic (actually from a toothpick) and crazy glued it on the button. It works great! I never miss the button anymore! See picture...
Hi All, I have owned a lot of HTC phones and now I have the HD, its the first time I see HTC phone with such small, thin, and hard to press power button !!
especially in the dark, I cant press it and wake up my phone easily !!
I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button, but again I have new problem : sometimes when I carry my phone the volume get pressed by mistake and the ringer get muted or low and I miss some calls !!!
Any solution for this problem so I can wake up my phone from the standby without pressing the microscopic power button !!
Take out the stylus and insert it back again. That wakes up the device. Otherwise you might want to search for a G-sensor enabled "wake-up" application. "Shake_it_to_wake" so to speak...
ahmadddd said:
Hi All, I have owned a lot of HTC phones and now I have the HD, its the first time I see HTC phone with such small, thin, and hard to press power button !!
especially in the dark, I cant press it and wake up my phone easily !!
I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button, but again I have new problem : sometimes when I carry my phone the volume get pressed by mistake and the ringer get muted or low and I miss some calls !!!
Any solution for this problem so I can wake up my phone from the standby without pressing the microscopic power button !!
Click to expand...
Click to collapse
Hello
Use S2u2
facet_ said:
Hello
Use S2u2
Click to expand...
Click to collapse
How can you use it to wake up the device? I don't see that option in the description, except the default stylus in and out...
...
I guess S2U won´t help you with waking up your device but if you use volume buttons it will protect you from accidental muting your phone.
I found power hard to press, too, but then I looked closely: This power 'button' is indeed non-symmetrical - at least on *my* device: it stands up a bit on one side, the left side, which is closer to the middle of the HD. So I press it *there*, because obviously enough that's the place where the sensor is located. It works easy every time.
ducatisto said:
I found power hard to press, too, but then I looked closely: This power 'button' is indeed non-symmetrical - at least on *my* device: it stands up a bit on one side, the left side, which is closer to the middle of the HD. So I press it *there*, because obviously enough that's the place where the sensor is located. It works easy every time.
Click to expand...
Click to collapse
Thats a brilliant tip. Thank you.
david-v said:
How can you use it to wake up the device? I don't see that option in the description, except the default stylus in and out...
Click to expand...
Click to collapse
Hello , use keylock.exe and set unlocking any key + s2u2,
ahmadddd said:
I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button,
Click to expand...
Click to collapse
Can you tell me how?
Ducasito. Good observation. I wondered why sometime it was easy and sometimes hard. So the slight non-symmetrical button is not a manufacturing fault but a very subtle design feature. Now I know which side to hit. Thanks
Seems all HD's are different OR I have a very heavy finger.
All I need to do to get it to wake it lightly touch the power button and it comes on.
JanSchotsmans said:
Seems all HD's are different OR I have a very heavy finger.
All I need to do to get it to wake it lightly touch the power button and it comes on.
Click to expand...
Click to collapse
I suppose it is just a matter of "where" you push the button. Just push it on the left edge (where the small led is placed) and you will not need that much pressure to switch the device on or off. The button sensor is actually under that left edge. the picture shows the powerbutton part (picture taken from the HTC Touch HD service manual). Under the left edge of it is the sensor, so putting the pressure there is the best way of pressing the button
ahmadddd wrote:
"I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button"
my question is: how did you manage it? with a special registry key?
....since a few months I`m searching for a solution....please help me
(my fingers are too big for the Power button)
many thanks, Michael
TFH said:
ahmadddd wrote:
"I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button"
my question is: how did you manage it? with a special registry key?
....since a few months I`m searching for a solution....please help me
(my fingers are too big for the Power button)
many thanks, Michael
Click to expand...
Click to collapse
You can use AE button plus. I use this to convert my volum buttons to up and down buttons on single click, select/ok on double click, and volume on hold and press.
Thanks for your answer but I´ve a further question:
Do you "wake up" (from standby) the blackstone by using this AE button? I tried to use this software but I couldn`t wake up the Touch HD from standby by using the volume buttons.
hi,
some of the hardware keys stopped working on my htc diamond...the only keys that work are. the power button, voluime buttons, up pad down pad and the center/ok button....everything else does not work, even the touch pad doesnt work...can any one please help me, OH and the buttons somtimes work for example when i somtimes press any button on the left side it will go to the home screen, for example when i press call button it will go to the home screen, same with the right side if i press the back button it will press the call end buton wierd eh? So basicly the buttons do respon (the litghts turn on when i press any hard ware button but they do not do anythin 99% of the time and if they do it is the wron function HELP GUYS!
Have you tried restarting the phone? Press and hold the powerbutten (if it works), and answer Yes to the question about shutting down. Take out your battery for 10 seconds, put it back in and fire up your phone... It might help
longice said:
Have you tried restarting the phone? Press and hold the powerbutten (if it works), and answer Yes to the question about shutting down. Take out your battery for 10 seconds, put it back in and fire up your phone... It might help
Click to expand...
Click to collapse
I have the same problem but it is only the home and answer buttons that stop working. If i do the restart it wirks but why should i keep having to do this
jsmith_00 said:
I have the same problem but it is only the home and answer buttons that stop working. If i do the restart it wirks but why should i keep having to do this
Click to expand...
Click to collapse
Hehe, can't answer that. I've had the problem only like twice in three months, so for me it's not a problem... I guess it's a software problem. Remember, it's not a Nokia The inside so much more complicated, so I guess we just have to live with some bugs...
Are you guys sure that this is a hardware related problem? I have the same prob and i was quite sure that i f**ked up the capacitative panel by playing kevtris manickly for quite a long time.
The capacitative screen is comprised by two parts folded.
I have opened the diamond and i found out that there is a lietle piece of metal that binds them together. This was bent(from kevtris probably) so istraightened it out with my bear hands. But it did not fix the problem. Do not try it anyway. Too messy if you have two left hands like me.
Have you ever seen a calibrator for the capacitative screen?
had the same problem only the power button would work , hard reset fixed it.
Have u installed S2U2..try uninstalling it...or install latest version 1.68 of S2U2
Is there any way to re-map the Power button so that we can use it to end a call instead of having to use the End Call soft button?
I don't know how many times I've finished a conversation, pressed that button only to realise that the person I was calling can still hear me as pressing the power button didn't hang up like it does in WM6.5 and Andriod.
Thanks for any help
The camera button does me, I keep loading the camera when I want to make a call haha
Sent from my DL Desire Series using XDA App
mcvpjd3 said:
Is there any way to re-map the Power button so that we can use it to end a call instead of having to use the End Call soft button?
I don't know how many times I've finished a conversation, pressed that button only to realise that the person I was calling can still hear me as pressing the power button didn't hang up like it does in WM6.5 and Andriod.
Thanks for any help
Click to expand...
Click to collapse
That's not possible because WP7 only supports 5 buttons > Camera, On/Off, Windows, Back and Search. There's no way to remap the keys (for now).
On the HD7 does the power button hang up the phone? I tend to cuss and swear quite a bit when I am alone in my car. The thought of a client hearing me because I did not hang up the phone properly really worries me.
I wonder if a custom dialer can be developed for WP7 that would support the hw buttons.
since yesterday, i have this nasty problem with my touchscreen. when i press the power button to wake the phone, or to get into the power-menu, the touchscreen stops working. this does no happen if i press any other button.
sometimes, i can use the phone again if i wait until the screen turns off and then wake it up by pressing any other button, but most of the time i need to pull out the battery and restart the phone. even when i pull out the battery, the screen won't work sometimes, and i have to restart the phone again.
when i first experienced this problem, i was using the nexushd2 v2.0 rom, i then updated to the v2.1, which didn't help. i tried reinstalling the rom, wiping the /data/ , the cache and the dalvik cache (multiple times) and eventually changed to the typhoon cm7 rom (with repartitioning and reinstalling the magldr), the problem is still there.
the phone did never get wet, fall down, or anything the like. pulling out the sd card makes no difference.
i hope someone can help me there
May be it´s a hardware problem, some HD2 have it.
You can test it, if you go back to windows.
its the good old digitizer its right under the power button press the end button hard and it should work again but if you press it again it will corrupt use softkey or remap your hardware buttons
http://forum.xda-developers.com/search.php?searchid=22866591
Kameirus said:
http://forum.xda-developers.com/search.php?searchid=22866591
Click to expand...
Click to collapse
Lol, I was about to do that
@OP, in future please use the search button before posting. There are far too many threads in this forum with exactly the same issue as Kamerius has just proved, so why couldn't you save both us and yourself some time and search first? Anyway, what you have is a digitizer issue, but a quick temporary solution is to simply press as hard as you physically can on the end call/power button. The screen should work after that. Use a button remapper or some sort of widget to enable you to use the phone without ever touching the end call button, and make sure to use other buttons to wake the screen.
Nigeldg said:
Lol, I was about to do that
@OP, in future please use the search button before posting. There are far too many threads in this forum with exactly the same issue as Kamerius has just proved, so why couldn't you save both us and yourself some time and search first? Anyway, what you have is a digitizer issue, but a quick temporary solution is to simply press as hard as you physically can on the end call/power button. The screen should work after that. Use a button remapper or some sort of widget to enable you to use the phone without ever touching the end call button, and make sure to use other buttons to wake the screen.
Click to expand...
Click to collapse
lol
i have the same problem with the endkey but with the rom in my sig
it actually has a softkey button that can be setup with a power softkey ..longpress on the softkey and it pulls up the power menu
just like it would do if you used the hardware power button
Yeah I thought there were softkey power buttons but I wasn't sure and I'm on my phone so couldn't be arsed to search
Sent from my HTC HD2 using XDA
Kameirus said:
link that doesn't work anymore
Click to expand...
Click to collapse
Nigeldg said:
many words
Click to expand...
Click to collapse
well, sorry dunno why i didn't search the forum before
pressing the power button hard worked , but i think i'll keep using soft buttons and wake the device pressing any other button (i don't think the brute force method is a good idea as i want to keep my phone some time longer )
Touch Screen Problem in HTC HD2
Thanks for your reply
Well i had HTC HD2 and i had install Android 4.0.3 and it was working fine from last 1 month but today suddenly it stop working touch screen and after 1 hour it started again but i wont able to touch every where it randomly working
So after then i read you reply and i try it i had press Hard Power button and then its started working fine and its work for 1 hour and then again stop so i again press hard power button and its started and also iam not using power button for any use
so you can let me know what is the permanent solution for this do i need to change touch screen completely it is damaged
pls let me know i will very thank full to you because 8 month back i already replace touch screen once and today again same problem
thanks
nrvjain said:
Thanks for your reply
Well i had HTC HD2 and i had install Android 4.0.3 and it was working fine from last 1 month but today suddenly it stop working touch screen and after 1 hour it started again but i wont able to touch every where it randomly working
So after then i read you reply and i try it i had press Hard Power button and then its started working fine and its work for 1 hour and then again stop so i again press hard power button and its started and also iam not using power button for any use
so you can let me know what is the permanent solution for this do i need to change touch screen completely it is damaged
pls let me know i will very thank full to you because 8 month back i already replace touch screen once and today again same problem
thanks
Click to expand...
Click to collapse
I am facing the same issue except no matter how hard I press the red button....LCD doesn't works. I have even replaced the thin metal strip which rests under hardware buttons.
Anyone?
Exactly, the same issue started to happen yesterday!!!
mwuahjaan said:
I am facing the same issue except no matter how hard I press the red button....LCD doesn't works. I have even replaced the thin metal strip which rests under hardware buttons.
Anyone?
Click to expand...
Click to collapse
I tried changing the metal strip too. But it still the same. Doesn't work.
Sent from my GT-N7100 using Tapatalk 2