Hi there,
I have a Samsung Omnia B7610 with WinMo 6.5, build in Radio & GPS. I also have a ASUS PDA 635, also with GPS & BT.
What I trying to do:
I run Franson GPS Gate and HyperGPS on the Smartphone. HyperGPS ist set to GPS & TMC, it runs fine on the Smartphone together with FREE NAVIGATOR, TMC and GPS works well. I Set the GpsGate on the Smartphone to Bluetoothserver with the Comport from Hypergps and I have already a Bluetooth connection to the PDA, using the serial port. I can successful connect the PDA to the Smartphone via Bluetooth but I do not receive a green Data Status with GpsGate on the PDA.
I did the same connection with a GPSEmulator on the Smartphone and it worked with TomTom on the PDA using the Bluetooth GPS settings. But I like to do the same with TMC via HyperGPS.
Any other connection freaks out there who can give me some hints or tried to do the same?
Thanks,
regards, Gopher.
Related
Hi all!
I found a strange problem reguarding bluetooth software conflicts beetween Qtek2020's Microsoft Bluetooth Stack and the Widcomm 1.4.1 (BluetoothGPS.cab) Stack.
It means.
Without the Widcomm Stack installed I am able to syncronize via Bluetooth with ActiveSync (com6).
And I moreover can surf the web trough my Qtek GPRS connection via Bluetooth. And that's perfect.
But.
With the Widcomm Stack installed I am still able to syncronize via Bluetooth with ActiveSync (on com6) but I loose the bluetooth-modem capacity!
I own a Trust180 Bluetooth/USB adapter.
I need the Widcomm Stack only to use my Fortuna Clip-On GPS and I will not need it anymore if I could find the way to use it with Qtek-Microsoft Bluetooth Stack, but I have not found the way to do it yet.
So I think I could only surf the registry to find the answer to let both stacks work together, is it possible?
Did anybody have the same problem?
Did anybody find the answer?
Thanks in advance!
Giuseppe
Hi Giuseppe,
I have the same Fortuna Clip-on GPS receiver and I'm able to use it with the MS BT stack. It bonds and offers the option to set up a serial port. If you accept this, it allocates Com 5 to the GPS. I use Tomtom navigation software and in the software set it up as a NEMA 38400 baud connection using Com 5 - all works fine.
Paul
XDA 2i Widcomm and Fortuna
I'm having the same problem with a fortuna clip on bluetooth gps and an XDA2i--for some reason that build of the widcomm stack (3900) doesn't work, yet earlier versions, such as that shipped with the XDA2s, appear to work fine--does anyone know where to find a version of the widcomm bluetooth stack from broadcom newer than 3900?
paulfanner said:
Hi Giuseppe,
I have the same Fortuna Clip-on GPS receiver and I'm able to use it with the MS BT stack. It bonds and offers the option to set up a serial port. If you accept this, it allocates Com 5 to the GPS. I use Tomtom navigation software and in the software set it up as a NEMA 38400 baud connection using Com 5 - all works fine.
Paul
Click to expand...
Click to collapse
Hi Paul,
thanks for your reply, I know my Clip-On should work together with every software for on road navigation...but...I unfortunately need OziExplorer for my off-road navigation and...OziExplorer need a com7 port.
That's all :wink:
I think I'll try Franson's tools: GPSGate & something else as I read here http://www.franson.com/forum/topic.asp?TOPIC_ID=17&SearchTerms=qtek,2020
I wouldn't like to hardreset my device again...I lost the number of my hardresets.
Thank you anywhere
Giuseppe
Hi giuseppe,I hate broadcom stack too, after many hresets, i thinks there is no way to solve this and other bugs, like the serial modem bluetooth connection.
The only winning move is to sell our 2020i and buy magician
Bye
Luca
Hi Luca, don't surrender, it can work!
I simply followed this http://franson.com/forum/topic.asp?TOPIC_ID=17&SearchTerms=qtek,2020 .
Now I am able to use my Fortuna GPS and my BT Motorola HS805 at the same time. And morover I am still using my Qtek's BT modem ability.
I payed 30 euros for Franson GPS Gate, but it solved my problems.
I am now trying to let ActiveSync work via Bluetooth because it's the only ability I lost. :?
Bye, thank You for your post,
Don't surrender!
Giuseppe
Hi there!
I'm having problems connecting the three togather. I have I-Mate Jam (or Xda Mini, or Mda Compact - all the same), Polstar PBT111 bluetooth GPS and TomTom3. I tried different ways but this bloody combination still doesn't work... Plug and Pray so to speak... I hope I'm not the only one with this problem, so can someone please tell me how its done? Thanks in advance!!
I am using tomtom 3 with unnamed bluetooth gps and its working like a dream
I had the same problems with my bluei (or something like that) gps mouse.
Then i heard on another forum that i had to rename my device to TOMTOM Bluetooth GPS (exactly) and it worked ever since....
S100 + Polstar
I have a Polstar GPS and I spend a lot of time to configure my Jam with Tomtom 3.
I have Tomtom's GPS driver version 3.07 417/421. The first step it's to know which driver to choose and the answer is NMEA 0183V2 9600 (and the 4800 it's an another possibility) not a high rate.
tomtom 3.07 GPS, JAM (1.11 big ROM) and Polstar with no problems. I had issue with Rikaline one first and changed to Polstar. First pair using the BT manager and click yes to create COM port for it (the passkey is 0000). Then start tomtom, configure GPS as bluetooth NMEA on port COM5 and you should be all set.
Hi All,
I have just received a Holux GPSlim236 to go with my Qtek S110, but I am having really hard time getting it to work. The software I am using at the moment is the GPS View, which comes with the reciever.
I have been able to pair them, but that is as far as I get. GPS View cannot see it, neither can some software called GPS Speed Sentry (which has worked with a previous GPS reciever).I have also been on www.pocketgps.co.uk, but I still have not been able to get it working. They keep on mentioning about changing the GPS Com Port, but I cannot find how to do this in Windows Mobile 2003SE. Has anyone been able to sort this out before?
Also do different companies version of Windows Mobile 2003SE differ. For Example could QTEKs Windows Mobile have different bluetooth options compared to Imate, O2 or TMobile? Could this be a reason why I cannot change the COM Port?
If anyone has been able to sort it out, can they let me know, as it is causing BIG headaches!!!
Hopefully I have left enough info...
Thanks
Nick
You do not say what, if any, navigation software you use
I found the Holux GPS viewer v1.05 unreliable and replaced it.
I Searched the internet and downloaded TomTom's GPS driver v2.08. I suspect that TomTom BlueTooth GPS is a rebadged Holux product.
Using the v2.08 driver select GPS and on the top of display drop down menu select TomTom Wireless GPS.
Next select from second drop down list Bluetooth Serial port and COM6.
Select Status and please make certain when using the Satellite receiver that your pocket PC BlueTooth Manager is turned ON.
Good luck
You do not say what, if any, navigation software you use
I found the Holux GPS viewer v1.05 unreliable and replaced it.
I Searched the internet and downloaded TomTom's GPS driver v2.08. I suspect that TomTom BlueTooth GPS is a rebadged Holux product.
Using the v2.08 driver select GPS and on the top of display drop down menu select TomTom Wireless GPS.
Next select from second drop down list Bluetooth Serial port and COM6.
Select Status and please make certain when using the Satellite receiver that your pocket PC BlueTooth Manager is turned ON.
Good luck
COM ports for GPS receiver
Just do the following:
go to
START - SETTINGS - Bluetooth Settings
Check that you have a Bluetooth Serial Port Setup
Inbound COM port: COM4
after that pair the gps receiver with your device.
When your software tries to connect to the gps receiver tell it that it's connect to COM4
That's the way I got mine working with route 66.
Bregards
I have TomTom software installed on my Atom, I've tried using a Polstar Bluetooth GPS unit to see if that would work but it fails to read the correct Comm port on the atom.
Does anyone know if this is compatible with the Atom, or of any other GPS devices (bluetooth or cabled) that would work?
Hi there
i am working with GPSlim236 from HOLUX and it very good and easy to install.
cool, thanks.
What's the battery use like if in use? The problem is that the lighter socket in my car is 'dodgy' to say the least, so the longer the life before i have to charge the better
(hmm...I predict being guided somewhere, losing battery life on GPS, and getting lost....SatNav at its finest.......)
The BT-77 (Nemerix chipset) from e-bay also works really well, especially considering the price. I have used this in Australia, UK and the US and have had no problems pairing it with the Atom.
Battery life is also good, as I've used it for a whole day with no sign of running out.
sometimes to connect GPS device, you need to create new OUTGOING port, and pareing the device
Thanks jeremy_elman, I will investigate.
Kropotov, I can get it to pair ok, and I have tried setting outgoing ports. The problem is that it won't allow me to set the outgoing port to the correct COM port that I need for the GPS. It comes up with an error.
I checked up on this from Polstar and they said to adjust registry settings. But even this doesn't work and they couldn't give me any information with regards to compatability. But I know the Polstar one I had works as it was working on an iPAQ 6340, installing it as a cable GPS device and setting the baud rate. The outgoing com ports on bluetooth could be set to the relevant ones for the device, and pairing was straight-forward.
Problem with GPS Reciver on Atom XDA with Tomtom
Hello, i've installed Tomtom 5.21 and the maps and everything is Ok. but i can't make the link between my gps reciver (Royaltek Star III) and the atom XDA. I've installed the partnership in the settings but it doesn't connect with the antenna. I've seen in my other pda (ipaq hx4700 and ipaq hx2790) that there is a bluetooth manager in the connection setting but there is non in the atom XDA. Do you know what's the solution ?
I've the same problem than you for the outgoing ports, i can't choose the one i want and i can't find the good port in tomtom gps settings.
Thanks
kropotov said:
sometimes to connect GPS device, you need to create new OUTGOING port, and pareing the device
Click to expand...
Click to collapse
same with u, kropotov. i use garmin gps10 with ATOM EXEC. work well and smooth.
dlawson5
it's very strange... i have all com ports free, and can choose all, include 8, that tomtom need. Do you have other bluetooth devices, pared with Atom?
I'm using a Garmin GPS10. To get around similar com port issues i install Franson's GPSGATE. A downloadable trial is available to try before you buy. The two advantages of this software solution is that you can nominate virtual com ports meaning you determoine the com port for the TomTom software and secondly you can use more than one GPS software package simultaneously. I run both Garmin Que (navigation) and OziExlorer (topographic and mapping) at the same time. You can't do this without GPSGate. Many bluetooth GPS devices drop their connections regularly. I find that GPSGate holds the connection better and reconnects quickly if it does drop. I highly recommend you try this before chasing around for different GPS devices.
John
Atom with BT GPS
I am using the Atom with the Holux GPSlim236 and it works like a charm.
Rated GPS battery life is 10Hrs and it uses the nokia 6xxx handphone battery so easy to charge and/or replace when battery gets old.
I had some problems using it initially 'cos built right into the Atom is a GPS management software that manages GPS connections apparently so that you can run more than one GPS application in the Atom and all the applications can share the GPS data. However I find that turning this on tends to lockup the GPS application (MapKing) and sometimes causes lost connections. TURN THIS OFF. Besides, I don't see myself using more than one GPS application (but that may change ! looking for a good track logging software - anyone knows one ?).
The other thing I noticed which makes the connection more reliable is to turn off the secure serial communication.
With those two settings off, works like a charm and no more problems !
O2 Atom with Holux GPSlim236 Bluetooth GPSr
Hi,
Not sure if this helps but I am able to get my Atom to work with my Holux BT GPSr using Garmin Que.
Here's the link to how I set it up : http://www.malsingmaps.com/forum/modules.php?name=Forums&file=viewtopic&p=41060#41060
So far, it rocks!
O2 Atom with Holux GPSlim236 Bluetooth GPSr
Hi,
Not sure if this helps but I am able to get my Atom to work with my Holux BT GPSr using Garmin Que.
Here's the link to how I set it up : http://www.malsingmaps.com/forum/modules.php?name=Forums&file=viewtopic&p=41060#41060
So far, it rocks!
I am using a TMC receiver from GNS on a HTC Leo with the following problem:
Connection with this device is possible via e.g. COM2. But before running IGO I first have to establisch a bleutooth connection before i can start IGO TMC. When i start IGO without first connecting to this bleutooth device it ask me to add a new bleutooth device or first make a connection to FM9BT-C. This screen disapperas verry fast, so no possiblity to make a selection. This does not happen with a HTC TytN II. In this case it makes automatically a connection with the selected bleutooth device FM9BT-C without asking for making a connection manually Does somebody have a solution for this.
TMC on HD2
Who has experience with using TMC on a HD2 via a bleutooth connection. Every time IGO askes for the correct bleutooth device. The screen looks like:
ad a new device ...
connect to FM9BT-C
Is there a possibility to connect directly to this TMC device without asking?
why would you need bluetooth?
you can use the build in TM radio for TMC...
search the development board for TMC ... greetz
There is no TMC driver for the Touch HD2
did they change the radio controller so much?
on rhodium ect. the tmc is working fine...
Yes they changed it. So at the moment no TMC driver for the HD2.
Hi, have you made any progress with the issue you have, of having to activate the bluetooth connection before starting your iGo8?