Related
So I originally asked this in Amon_RA's recovery thread, but was kindly asked to move it here. So here's my issue.
My G1 is not recognizing or creating any ext partitions using either the manual parted method or the automatic script include in Amons recovery. Using the manual method to make ext2 I get the following error:
Error: Input/output error during write on /dev/block/mmcblk0
Retry/Ignore/Cancel
Fat32 gets created fine.
I used fdisk on my laptop to create the partitions and it seems to take, but once I put the sd card back into my phone it disappears. Taking the card out of my phone and back in my laptop, the ext and swap partitions are gone. Anyone have any idea as to what the problem could be, or is my card just pretty much bricked?
SpiggidyBob said:
So I originally asked this in Amon_RA's recovery thread, but was kindly asked to move it here. So here's my issue.
My G1 is not recognizing or creating any ext partitions using either the manual parted method or the automatic script include in Amons recovery. Using the manual method to make ext2 I get the following error:
Error: Input/output error during write on /dev/block/mmcblk0
Retry/Ignore/Cancel
Fat32 gets created fine.
I used fdisk on my laptop to create the partitions and it seems to take, but once I put the sd card back into my phone it disappears. Taking the card out of my phone and back in my laptop, the ext and swap partitions are gone. Anyone have any idea as to what the problem could be, or is my card just pretty much bricked?
Click to expand...
Click to collapse
try paragon partition manager 9.0. see if that works for you. if not hit up newegg or meritline for a new card
Bad SD Card
b0ricuaguerrero said:
try paragon partition manager 9.0. see if that works for you. if not hit up newegg or meritline for a new card
Click to expand...
Click to collapse
I've been pulling my hair out for the last day trying to figure out why it would act like it partitioned fine, but then when I did a 'print' in parted it would only show one FAT32 partition. I had the EXACT problem the OP was having.
Half my day spent looking for some other resolution and then realized I had another SD card with me (just half the size) and tried it in the Recovery with that one with complete success. No errors or anything. I'm trying Paragon Partition Manager for my larger card, but not finding an option for the ext2 (or other UNIX) formats. It's the free 2010 version so I'm not sure if that makes a difference.
Bad SD Card - Paragon Killing USB Drivers?
vwyankee said:
I've been pulling my hair out for the last day trying to figure out why it would act like it partitioned fine, but then when I did a 'print' in parted it would only show one FAT32 partition. I had the EXACT problem the OP was having.
Half my day spent looking for some other resolution and then realized I had another SD card with me (just half the size) and tried it in the Recovery with that one with complete success. No errors or anything. I'm trying Paragon Partition Manager for my larger card, but not finding an option for the ext2 (or other UNIX) formats. It's the free 2010 version so I'm not sure if that makes a difference.
Click to expand...
Click to collapse
So, version 9.0 has the options for the needed Linux partitions. With that, it would appear I have a bum 8GB card. As stated, the 4GB works just fine - both Transcend Class 6 cards. On one PC it was having a difficult time in the formatting process after creating the partition and I had to kill the application via task manager in Windows. Then it got to where my USB port drivers couldn't start so I couldn't read via SD card adapter or USB cable to the phone with the card mounted. I'm in IT so I've dealt with drivers failing before, but I'm finding myself having to ask my friend Google now as even after uninstalling the drivers I have the same result. I'm afraid it might be due to the Paragon application. More on that below.
I installed Paragon on another laptop at home and it went through the process successfully (at least appeared to) with the 8GB card. Joy had returned to my frustrated being and I proceeded to use the restore image to upgrade from ext2 to ext3 - success! - Then it was wipe and flash. All seemed well in the world until I went into the settings after getting into the OS for the first time (again) to look at my secondary SD Card space and found it at "unknown." Looking at the card via Paragon Partition Manager once again it was showing as only two partitions instead of three with the ext3(2) being "unformatted." Just to be sure, I put in the 4GB card to verify in Paragon it's showing as expected (three partitions in correct formats).
Being the stubborn sod I am, I came to work determined to get the 8GB card working and installed Paragon on a test machine (I run a large testing lab) and redid the partitions. Removing and re-adding the partitions on the 8GB with "success" then simply unmounting and mounting the card to the PC revealed the card is definitely the major flaw all along. After mounting it came up as just the two partitions again - FAT32 and unformatted for the 2nd, even though it was only 10 seconds ago it showed successful creation of the three and formatting. Because I'm one to verify a verification I repeated my steps to see the same result. However, not only did I see this same result I now DIDN'T see the SDCard via Explorer, but could via Paragon. Inspection of Device Manager showed the exact same thing as on my home laptop that stopped being able to read the Android phone with card or adapter with card.
So, my last couple days of fighting and frustration were all because of the SD card of which I've never had a problem with it storing data for the last year with many times reformatting and re-applying data. Odd, to say the least. I am back up and running, but now I have USB drivers failing to start problem on two PC's! This is not a concern with the one at work since I'll just restage it, but I'm afraid it might take restaging my laptop for this to be fixed which as we all know is just not very convenient.
Anyhow, the lengthy explanation was more for those like me that were Googling/searching for a long time for a similar situation.
Cheers.
I have a similar problem. One of my SD cards of 1 GB has ext 2 and 3. But the main one of 2 GB can be partitioned only with ext 2. I am using Amon Recovery 1.5.2. When I press create ext 3 I get an error and not even from console it doesn't work, I get upgrade_fs not found.
adair said:
I have a similar problem. One of my SD cards of 1 GB has ext 2 and 3. But the main one of 2 GB can be partitioned only with ext 2. I am using Amon Recovery 1.5.2. When I press create ext 3 I get an error and not even from console it doesn't work, I get upgrade_fs not found.
Click to expand...
Click to collapse
I would say it IS the same problem and that your card is not being partitioned properly. The reason it can't upgrade from ext2 to ext3 is because there isn't ext2 to begin with even though the partition process gave a "success" result in the Recovery. I'm using the same Amon 1.5.2 as well. It somehow will not format as the space will be there unformatted if you open the card in a partition application with GUI.
Going to the SD Card settings from within the OS you'll see the SD Card secondary use grayed out and showing "unknown."
So what is the solution? What if I buy a new card Class 6 that can't be partitioned?
adair said:
So what is the solution? What if I buy a new card Class 6 that can't be partitioned?
Click to expand...
Click to collapse
I would say keep your receipt and return it for another. I've had issues with SD cards before where they kept going corrupt within a day of use and just returned them for another (same brand, same model) that would work fine.
It's not a hardware problem, I managed to partition it after some tries. I think that Amon RA recovery does not recognize the sd card sometimes. It worked after I hit the reboot button in recovery and pull out the battery. After that I went back to recovery and I could partition it.
vwyankee said:
So, version 9.0 has the options for the needed Linux pblah blah blah blah
.... windows .....
blah blah blah
Googling/searching for a long time for a similar situation.
Cheers.
Click to expand...
Click to collapse
bug a friend with a linux///mac machine and partition it with that. i've seen lots of problems with usb/partitioning on windows ,and never had the same problem on mac/linux. 3 microsd cards were 'unusable' according to vista, reeformated just fine with osx.
give it a shot.
adair said:
It's not a hardware problem, I managed to partition it after some tries. I think that Amon RA recovery does not recognize the sd card sometimes. It worked after I hit the reboot button in recovery and pull out the battery. After that I went back to recovery and I could partition it.
Click to expand...
Click to collapse
You verified it worked with looking in the SD card and Phone storage settings?
I've also discovered that the 4GB card that I was able to partition without a problem was one I should've thrown out as I couldn't remember where it came from until after dealing a couple days of constant lockups on the phone (now that things are running off the SD). It was thrown in a drawer due to going corrupt every few days where the data on it was lost/gone/unreadable. Going out to get a new SD card today.
To the statement about bugging someone with a mac/linux, that doesn't appear to be the issue here since it won't work with using Gparted either (at least in my case).
Just an FYI update, that after buying a new (not the lowest end) SDHC class 6 8GB card, it partitioned just fine in the recovery image along with being able to upgrade the ext2 to ext3 then ext4. Now I'm finally seeing the speedy benefits running Cyanogen's latest ROM. No issues since replacing with a good card.
Another thread, i think i'm a totally noOb
Today, i downloaded Wildpuzzle Rom .. and flashed it ... everything went fine
I used this tutorial...
http://baert.ulyssis.be/2010/10/13/wildpuzzle-rom-for-htc-wildfire/
this was okay...but in the 4. point ... "Creating an EXT partition on the SDCard"
there was a problem ... after i selected the fat32 and ext2 size, and the phone rebooted .... i had an error message .... "E:failed to seek in /cache/update.zip" ...
i've tried a lots of time...always rom manager failed to made the right partitions...
so i moved on, and i tried to made the partitions with manually in windows xp
i've downloaded Paragon Partition Manager 9.0 to do the partitioning....
After i had the 2 partition, 1500MB Fat32 and 300MB ext2, the pc rebooted to make the changes .... and then i had an error message (i can't remember, cause it dissapeared quickly).....
when xp started again i saw my sd card is not working .... windows said, "You must format the SD card" .... and it was only 512 kbyte the full size
i tried a lots of applications, which recovery, or fix sd cards, but nothing helped :/
any solution?!
i wouldn't like to throw away my sdcard if its not necesarry
thx.
lazlo
Try gparted, linux boot cd, make fat32 partition first then make ext3 partition no need for swap on phone
Sent from my HTC Wildfire using XDA App
i have tried gparted, in ubuntu live cd, but when i insert the sd card to the reader nothnig happen ... and gparted stop working :S .. its freeze or something like that
Did you try to delete the partition and creating a new drive? Like when you buy a new disc... You have to create a new partition and a new logical drive...
You can use Paragon partition manager...
I guess gparted was loading, it take a little while to read the entire HDD.
Sent from my HTC Wildfire using XDA App
LogicXLz' said:
Did you try to delete the partition and creating a new drive? Like when you buy a new disc... You have to create a new partition and a new logical drive...
You can use Paragon partition manager...
Click to expand...
Click to collapse
No thx, Paragon partition manager killed my SD card ... so i won't use that app again, never...
But meanwhile, i could fix the SD card with Ubuntus's gParted ... i've tried a lots of time ... reinserted the card to the reader .... and finaly it recognised it ... and can made a valid partition ... so the problem solved
anyway, thx the idea
A very simple and quick solution to this kind of problem (for other users / future reference, now that you've solved it): put it in your photo/video camera and format it. This would do a low-level format of the SD card, allowing you to see and use it in Windows. Any camera with this function will do (Nikon, Canon, Panasonic, etc.)
phunctionist said:
A very simple and quick solution to this kind of problem (for other users / future reference, now that you've solved it): put it in your photo/video camera and format it. This would do a low-level format of the SD card, allowing you to see and use it in Windows. Any camera with this function will do (Nikon, Canon, Panasonic, etc.)
Click to expand...
Click to collapse
thx a lot dude ... this is a simple and a good idea
never would thought this
Good one!!! It is a very simple solution. However if it works with "camera formating", then the issue with SD card is not too bad. I mean, it's not corrupted in a way to be unusable or "bricked" in some way.
And thus, I think you needn't even bother using some other gadget, just a sufficient knowledge on partitioning tools and you can make it work on your computer. I still believe it could be repaired with Paragon Partition... 've been using that program ever since and never had any problems...
Anyway, the more options avaliable, the more possibilities for a success! ;-)))
Hy every body, does some one heard about SD damaged after a FAT32/EXT4 Format?
Let me explain myself:
I've SD-FROMATTED my sd, then using GPARTED LIVE SD in my HD2 in MAGLDR
i've created two partitions:
1/ FAT32
2/ EXT4
I do have click on "apply".
Now, my SD is unreadable and unrecognized by my phone.
The oly way i have to use it now is FAT32 only.
It is the third time i do the partitioning on this SD and it's the first time it does'nt work
HEEELP!!!
I've heard about file corruption using MAGLDR USB MassStg...Is-it true
Thanks for your anwers
No answer? Nobody?
download panasonic SD Formatter 3.0 and that will sort it no probs.
matt
Try Panasonic SD Formatter as mentioned above. With the stock SD card I've had problems formatting using a card reader, however. I had to flash back to a windows mobile rom, connect to PC as a hard drive (not active sync) and re-format the card via that method. It's a pain, but try this if you're really stuck.
Thanks i'll try those methodes
i use minitool partition manager
but first go to control panes, then computer management, devices, find your sd card and right click on it. select create new disk label and that should solve your problem.
now after that run minitool partition manager and you 'll be able to see your sd car as new disk (or something) just create a new partition as (fat32, primary) format maybe that could solve your problem.
(the same thing happen to mee and i was about to cry because of it)
(sorrry for bad english, i'm still learning)
Thanks kof102. I'm on it
ttersu said:
Hy every body, does some one heard about SD damaged after a FAT32/EXT4 Format?
Let me explain myself:
I've SD-FROMATTED my sd, then using GPARTED LIVE SD in my HD2 in MAGLDR
i've created two partitions:
1/ FAT32
2/ EXT4
I do have click on "apply".
Now, my SD is unreadable and unrecognized by my phone.
The oly way i have to use it now is FAT32 only.
It is the third time i do the partitioning on this SD and it's the first time it does'nt work
HEEELP!!!
I've heard about file corruption using MAGLDR USB MassStg...Is-it true
Thanks for your anwers
Click to expand...
Click to collapse
Also, as a long time Android recovery user (I went through several Android phones before coming around to the HD2), I would highly recommend formatting your card using Clockwork Recovery.
HyoImowano said:
Also, as a long time Android recovery user (I went through several Android phones before coming around to the HD2), I would highly recommend formatting your card using Clockwork Recovery.
Click to expand...
Click to collapse
One problem can be that when try create a Ext partition using CWR it only creates an Ext2 which isn't really the best.
I've seen on differnt French forums that i'm not alone. Is there a Risk formatting and partitioning an SD Card, that is not done for, to damage allocation Table?
My SD is dead now. Not even my PC, my Phone or else are abble to find my SD. Have you heard about that?
No answer? No body?
try using EASEUS Partition Master 7.0.1 Home Edition with this u will be able to see what is going on.. hope it helps.
Thanks, Have you allready heard about that befor?
I had a problem with my SD it didn't come up on my pc too,when I was playing with the dual booting partition making for wp7 and android. some how it messed up and SD didn't come up so I found this program Easeus and some how managed it to work again it was a simple problem that all I had to do is to recreate the partition and only after that u can format it. if it doesn't exist u format nothing actualy lol.
hope u have the same problem.
I've tried EASUS but it was unable to read my SD...
I think it's dead now...
I've bought an other one and part it with CWM. It's EXT2 but it work perfectly!
Maybe it could be nice to check if nobody else had the same than me...and tell it to Master COTULLA!
No body else?
Can anyone help me out with updating the dual boot Phiremod/HC install?
My pc is a Windows 7 64-bit and I'm having absolutely no luck expanding the sd card to use the full 8GB.
Windows 7 and Easeus don't see the partitions, and Gparted does, but won't let me expand to include the free space (listed as unallocated).
I finally managed to mount the sd card via ADB, and have copied the phiremod update zip there, but when I try to install it, I get an error (bad) and after a restart, the file has vanished from the partition.
I'm very new at this, but can usually follow detailed instructions.
Here's what I did to update to 6.3:
Insert SD Card into my computer's card reader
Download EASUS Partition Manager (also using W7 64-bit)
Take the SD Card partition (#6 I believe) and extend it using the unallocated space left (mine was about 6Gb left on my 8Gb card)
Run the job in the partition manager
Throw SD Card and boot into Phiremod 6.2
connect to computer via USB and copy the 6.3 update to the SD Card
reboot in recovery, clear cache and dalvik cache (under advanced)
flash the 6.3 update zip
Mine hung at the android... screen for about 10min then I did a hard reboot and it fired up and has been working fine.
I was getting gmail force closes until I wiped cache and dalvik cache so I added that step in before flashing.
Let me know how it goes!
Ummm.... yeah, what he said above.
Thanks "toosurreal01"
It's great when a community like this helps each other out.
-Racks
toosurreal01 said:
Here's what I did to update to 6.3:
Insert SD Card into my computer's card reader
Download EASUS Partition Manager (also using W7 64-bit)
Take the SD Card partition (#6 I believe) and extend it using the unallocated space left (mine was about 6Gb left on my 8Gb card)
Let me know how it goes!
Click to expand...
Click to collapse
Thanks for the step by step instructions, but for me the buck stops at trying to extend the partition. Easus only sees the boot partition. Gparted shows all the partitions, but won't extend the sd partition. It looks like it should work (lets me drag the extender thingy), but when I apply the action, it reverts back to the original, with no error message. Just doesn't do it.
Should I start over and reformat the card?
It wouldn't hurt. Only thing you would lose are apps you've installed.
You could always use Titanium Backup for that though.
If you do reformat make sure you do a full format and not a "quick" one so no data is still lingering on the card.
Let us know how it goes!
siskiou said:
Thanks for the step by step instructions, but for me the buck stops at trying to extend the partition. Easus only sees the boot partition. Gparted shows all the partitions, but won't extend the sd partition. It looks like it should work (lets me drag the extender thingy), but when I apply the action, it reverts back to the original, with no error message. Just doesn't do it.
Should I start over and reformat the card?
Click to expand...
Click to collapse
Just a shot in the dark. But did you unmount the partitions first before applyin your changes in EAsus?
racks11479 said:
Just a shot in the dark. But did you unmount the partitions first before applyin your changes in EAsus?
Click to expand...
Click to collapse
Hm, no, I don't think so.
How would I do that? Card in Nook, or in PC?
Again, Easus only shows the boot partition, and nothing else.
siskiou said:
Hm, no, I don't think so.
How would I do that? Card in Nook, or in PC?
Again, Easus only shows the boot partition, and nothing else.
Click to expand...
Click to collapse
I meant gparted. Sorry. Did u unmount the partition before attempting to extend it?
And when doing so. Please don't do it while card is in nook. Only when its in PC directly with a nmicrosd card reader
Sent from my NookColor using Tapatalk
racks11479 said:
I meant gparted. Sorry. Did u unmount the partition before attempting to extend it?
And when doing so. Please don't do it while card is in nook. Only when its in PC directly with a nmicrosd card reader
Click to expand...
Click to collapse
Ah, do I need a usb micro sd card reader?
I only have a regular size sd card adapter for it.
And no, I didn't unmount the partition. I checked earlier, but there is no such option in the gparted menu, and I don't have much advanced partitioning knowledge.
A google search didn't help much.
Would appreciate if you could tell me how to do this!
siskiou said:
Ah, do I need a usb micro sd card reader?
I only have a regular size sd card adapter for it.
And no, I didn't unmount the partition. I checked earlier, but there is no such option in the gparted menu, and I don't have much advanced partitioning knowledge.
A google search didn't help much.
Would appreciate if you could tell me how to do this!
Click to expand...
Click to collapse
It is preferred to use a micro sdcard reader. I assume you are using a Linux box or live CD with gparted. But there should definitely be a n option for you to unmount the partition. You will not be able to make any changes to mounted partitions.
Right click over the partition that you want to work with. It should give you a menu. And unmount should be one of the options.
Sent from my NookColor using Tapatalk
racks11479 said:
Right click over the partition that you want to work with. It should give you a menu. And unmount should be one of the options.
Click to expand...
Click to collapse
Thanks for all your help!
I'm using a live cd on a Win 7 pc, and there is definitely no unmount option in the right click menu when I boot into gparted. Not even a greyed out one.
I'll try and burn another cd and see if that changes things.
siskiou said:
Thanks for all your help!
I'm using a live cd on a Win 7 pc, and there is definitely no unmount option in the right click menu when I boot into gparted. Not even a greyed out one.
I'll try and burn another cd and see if that changes things.
Click to expand...
Click to collapse
That is very strange. There should always be an umoint option for partitions if gparyed recoginizes the drive. Hmmmm.... which version of Ubuntu are you using?
Sent from my NookColor using Tapatalk
I downloaded the Gparted live version 0.8.1-3.iso.
siskiou said:
I downloaded the Gparted live version 0.8.1-3.iso.
Click to expand...
Click to collapse
Yeah. Then there shouldn't be an issue. :/
It might just be an issue with your card reader.
Sent from my NookColor using Tapatalk
Thanks again. I'll report back in once I get a usb card reader!
racks11479 said:
It might just be an issue with your card reader.
Click to expand...
Click to collapse
Got a card reader and Easeus and Win 7 Disk Management can now see all the partitions.
No luck expanding the sd partition, though. The action seems to happen, but then everything reverts back to what it was originally.
No mount/unmount option anywhere to be found, not with Easeus, nor with Gparted or Win 7.
I'm out of ideas at this point and will reformat the card and start over.
Edited to add: Aaand I'm now having trouble doing *that*, too.
Tried it on the pc: no go.
Tried it on the Nook: it claimed the card was sucessfully formatted in about 1 sec, and then got stuck on that notice.
Waited 5 minutes, still stuck. Turned it off and back on, and Nook booted into Phiremod.
Any ideas how I can reformat this demon card?
Edited to add: Am now using a low level formatting tool and get "format error occurred at offset ...". The program is still running and seems to be formatting the rest of the card.
Does this sound like the sd card is damaged?
A couple other options for you to try:
SD Formatter 3.0 - Made specifically to format SD cards - http://www.sdcard.org/consumers/formatter_3/
Partition Wizard - This is the software I used to extend the SD Card partition. Really simple to use - http://download.cnet.com/Partition-Wizard-Home-Edition/3000-2094_4-10962200.html?tag=mncol;7
I would try formatting the SD card, reinstalling the dualboot image, the using Partition Wizard to extend the SD card partition.
As far as updating, I haven't tried the newest update the when I updated from 6.1 to 6.2 I plugged my Nook into my computer, dropped the update file onto the Nook's internal memory, then moved it to the SD card with the Root Explorer app.
Hope any of that helps. Good luck!
kwyrt said:
A couple other options for you to try:
Click to expand...
Click to collapse
Thanks! I will give those a try, since everything was still on the card after the low level format.
Who knew that reformatting would be such a problem!
Did you have to unmount the sd partition, before extending it?
I extended the partition with Partition Wizard immediately after burning the dual boot image. Never messed with mounting or unmounting anything. I'm a little new to this myself really. Why would you need to mount the SD card partition?
I didn't think I had to, but racks11479 mentioned it as a possible solution in this thread, so I thought I'd ask.
None of the programs had any success in reformatting my card, so I returned it to the store and got a replacement.
Now I'm very ambivalent about trying again and possibly messing up another card.
Can anyone here think of anything that I might have done (or should have done) to cause the card to act this way?
And if anyone feels like posting a baby step guide for someone like me, I'd very much appreciate it!
Edited to add: I just found the following
*********
It also will produce a multi partition removable disk for which windows will not allow you to re-partition. If you want to get back to "normal" disk you can reformat it with Hewlett-Packard Company's HPUSBFW.exe
***********
Also, I used an old 2GB card to reformat my NC (went fabulously easy) and then reformatted that and tried a CM7 rom, which worked, but was way too slow. This reformatted again, without any problems, so I'm not sure if the above statement (regarding bootable sd cards) is correct or not.
And if anyone feels like posting a baby step guide for someone like me, I'd very much appreciate it!
Hello first I want to say a big THANK YOU to everyone that has put time and effort into making the Nookie what it is today....but I have a noob question.
I recently got a 16gb micro SD and can successfully get the 0.6.8 Nookie to run on my nook color, my problems start when I try to "recover" my other 13gb's. Before I get burned and tossed aside I have checked
http://forum.xda-developers.com/showthread.php?t=922324&page=92
http://forum.xda-developers.com/showthread.php?t=883175&highlight=partition&page=103
and about 5 other pages and they all say the same thing..use EASEUS, grab the slide bar and voila. It appears to work but when I install it in the NC it either becomes very unstable or just boots to the NC as if the SD card was not there.
Anyone have any ideas?
Jeep_Lover said:
Hello first I want to say a big THANK YOU to everyone that has put time and effort into making the Nookie what it is today....but I have a noob question.
I recently got a 16gb micro SD and can successfully get the 0.6.8 Nookie to run on my nook color, my problems start when I try to "recover" my other 13gb's. Before I get burned and tossed aside I have checked
http://forum.xda-developers.com/showthread.php?t=922324&page=92
http://forum.xda-developers.com/showthread.php?t=883175&highlight=partition&page=103
and about 5 other pages and they all say the same thing..use EASEUS, grab the slide bar and voila. It appears to work but when I install it in the NC it either becomes very unstable or just boots to the NC as if the SD card was not there.
Anyone have any ideas?
Click to expand...
Click to collapse
I use Lexar Bootit ....a free utility...to format and flip the bit that says its a removeable drive, then your windows pc drive management can see and format it as full capacity fat32.
Hey thanks for the tip, unfortunately it won't work. I forgot to mention that I followed this tutorial ..... and updated my driver (saved my original Windows just in case) to a hitachi driver and now I can switch my SD memory card forth "removable" to "logical" and back when needed. Once I get it as a logical drive I was EASEUS to increase the size of partition 4 (SD Card)..but again no dice!!!
Seeing that I am a noob I can't post the link to the tutorial but I'll say it worked like a charm and when I want to go back to the original I just need to "roll back" the driver.
Well, a couple of things:
Are you using a Sandisk card? Sandisk class 2 and 4 cards have been found much more stable than most others for running a ROM from SD, and problems with SD installs often go back to the card.
Any particular reason you went with Nookie Froyo? It has pretty much fallen out of use since the NC's stock OS was updated to Froyo in May. If you want an SD install, there's a simpler, size-agnostic method for CM7, which is also a more robust and capable OS and a more advanced version of Android (Gingerbread 2.3.4 rather than Froyo 2.2). I would recommend CM7.1 RC1, or if you're adventurous, Nightly 136.
Taosaur said:
Well, a couple of things:
Are you using a Sandisk card? Sandisk class 2 and 4 cards have been found much more stable than most others for running a ROM from SD, and problems with SD installs often go back to the card.
Any particular reason you went with Nookie Froyo? It has pretty much fallen out of use since the NC's stock OS was updated to Froyo in May. If you want an SD install, there's a simpler, size-agnostic method for CM7, which is also a more robust and capable OS and a more advanced version of Android (Gingerbread 2.3.4 rather than Froyo 2.2). I would recommend CM7.1 RC1, or if you're adventurous, Nightly 136.
Click to expand...
Click to collapse
Thanks for the info unfortunately I am using a 16gb PNY, class 4 and at $15 I couldn't pass it up...looks like I should have done some more reading first. Really I have no clue why I am using the Nookie, my wife said said that was the one she wanted. I think she just likes saying "Nookie", but I'll give the CM7 a go and see what trouble I can get into.
thanks again...
Taosaur...I was able to get the CM7 mod up and running in no time flat. Now the wife wants me to see if I can get bluetooth working.
You said "I was able to get the CM7 mod up and running ...." so I assume you got your problem fixed. That's good.
About bluetooth.
1. Turn off Wifi
2. Power off NC
3. Power on NC
4. Turn on bluetooth
5. Turn on wifi
votinh said:
You said "I was able to get the CM7 mod up and running ...." so I assume you got your problem fixed. That's good.
About bluetooth.
1. Turn off Wifi
2. Power off NC
3. Power on NC
4. Turn on bluetooth
5. Turn on wifi
Click to expand...
Click to collapse
Yep, I had to do the above the first time I turned on bluetooth, but haven't had any trouble toggling it on and off since then. Just open notifications (that broken-circle-and-arrow button on the status bar) and you have toggles there for Wifi, bluetooth, and a couple other things.
@ Taosaur,
I've seen your signature indicate you are running nb136, any change or improvement (both slightly and/or significant) over the previous ones?
Jeep_Lover said:
Thanks for the info unfortunately I am using a 16gb PNY, class 4 and at $15 I couldn't pass it up...looks like I should have done some more reading first. Really I have no clue why I am using the Nookie, my wife said said that was the one she wanted. I think she just likes saying "Nookie", but I'll give the CM7 a go and see what trouble I can get into.
thanks again...
Click to expand...
Click to collapse
Damn! My wife never says "nookie".
votinh said:
@ Taosaur,
I've seen your signature indicate you are running nb136, any change or improvement (both slightly and/or significant) over the previous ones?
Click to expand...
Click to collapse
I haven't done much but read and browse a little since I flashed it, but I haven't noticed any difference from 7.1 RC1, which wasn't really any different from Nightly 102 I had before that. I mostly just flashed this time for the integrated OC/Tweaks kernel, without the video/lag problems that were reported in 132-134.
Thanks for an update, m8
maybe someone can help me, i'm about to loose my mind here trying to figure this out. i'm using a Sandisk class 4 16gb card running CM7 with the OC kernal.Did all of this using the size agnostic install method. everything is working fine but i can't for the life of me figure out how to access the rest of the space on my SD, when i insert the sd card into my PC it just shows up as the 115mb partition. i've tried using EASeus, the lexar bootit, and some other partition tool with no luck. with Easeus i select the 13gb FAT32 partition and make it active and thats it right? does it need to be logical? and which partition am i resizing?
Dr. Light said:
maybe someone can help me, i'm about to loose my mind here trying to figure this out. i'm using a Sandisk class 4 16gb card running CM7 with the OC kernal.Did all of this using the size agnostic install method. everything is working fine but i can't for the life of me figure out how to access the rest of the space on my SD, when i insert the sd card into my PC it just shows up as the 115mb partition. i've tried using EASeus, the lexar bootit, and some other partition tool with no luck. with Easeus i select the 13gb FAT32 partition and make it active and thats it right? does it need to be logical? and which partition am i resizing?
Click to expand...
Click to collapse
None of the above. Windows will only recognize the first partition on a SD card, and when you make a SD bootable, that first partition will be the boot partition. To access the larger storage partition, connect your NC with CM7 running to the PC over USB. Open notifications on the NC, tap through "USB connected" to the USB screen, and "Turn on USB storage." Windows will now detect two storage drives, NookColor (the system partition, where apps install) and SDcard (the large storage partition).
The only time you'll want to remove the card from the NC and plug it into your PC is when you want to put on a new cm...zip update file to flash a new ROM.
I used the size agnostic install method with a 16gb PNY calss 4 SD and after all the steps were completed I was showing 13.8gb free for my SD card when I looked at in on the NC. Not believing my eyes I pulled it out and looked at it with EASUS and it showed partition 4 as 13.8gb (utilizing all the cards remaining space). I then downloaded a few things and added a few books for my wife and the space shrank to 13.4gb. As stated above your computer wont show it.
In short have you looked on the NC under "Storage" (I think that is were I found it) and verified you don't have the full capacity already?
Also there is another method I needed to use when I was messing with an earlier version (Nookie) that allowed me to see an SD card as a "Local Device" so windows would let me see all partitions on the hard drive. I can't post a link until I have more posts but email me and I can send you the link if interested.
Taosaur said:
None of the above. Windows will only recognize the first partition on a SD card, and when you make a SD bootable, that first partition will be the boot partition. To access the larger storage partition, connect your NC with CM7 running to the PC over USB. Open notifications on the NC, tap through "USB connected" to the USB screen, and "Turn on USB storage." Windows will now detect two storage drives, NookColor (the system partition, where apps install) and SDcard (the large storage partition).
The only time you'll want to remove the card from the NC and plug it into your PC is when you want to put on a new cm...zip update file to flash a new ROM.
Click to expand...
Click to collapse
thanks, well that got me some where. i connected nook to PC, turn on storage mode and it shows E/F drive. click either one and it says "Please insert disk into removable disk E/F" so then i turn off debugging and the nook color internal memory pops up as drive F, while clicking on drive E gives me the same error as above. any ideas? btw i'm on Windows 7 64bit, do i need any kind of special drivers or anything?
It is because windows will only allow you to manipulate the first partition on an SD card...even if it "sees" the other partition as another card it will not do anything with it. EASEUS will show you all the partitions on the SD.
The only way I got Windows to see all the partitions and do anything with them was to change my driver via the "Hitachi fix" If you google Hitachi driver SD card you will find it. I used this site and even though it is long it did exactly as advertised and now I install this driver when I need to format just the partition of an SD card and then "roll back" the driver when I'm done. It tricks windows into thinking it is a local device instead of removable. www/1src/com\forums\showthread.php?t=133718
change / to .
\ = /
I can't post a link as I'm still a noob...
Jeep_Lover said:
It is because windows will only allow you to manipulate the first partition on an SD card...even if it "sees" the other partition as another card it will not do anything with it. EASEUS will show you all the partitions on the SD.
Click to expand...
Click to collapse
S/he really doesn't need Windows to do anything with those other partitions--I suspect messing with them was where s/he went wrong in the first place.
Dr. Light said:
thanks, well that got me some where. i connected nook to PC, turn on storage mode and it shows E/F drive. click either one and it says "Please insert disk into removable disk E/F" so then i turn off debugging and the nook color internal memory pops up as drive F, while clicking on drive E gives me the same error as above. any ideas? btw i'm on Windows 7 64bit, do i need any kind of special drivers or anything?
Click to expand...
Click to collapse
I suggest you start over, because you probably damaged your install when you were messing with the partitions earlier. I'm also using Win7x64, and no, I didn't need any special drivers. Delete all partitions except "SDcard" in EASEUS, expand that partition to the whole card, then write verygreen's image to the card again and re-install. At that point, you should be able to access storage over USB from CM7 without turning off debugging or taking any other special steps other than "Turn on USB storage."
Taosaur said:
S/he really doesn't need Windows to do anything with those other partitions--I suspect messing with them was where s/he went wrong in the first place.
I suggest you start over, because you probably damaged your install when you were messing with the partitions earlier. I'm also using Win7x64, and no, I didn't need any special drivers. Delete all partitions except "SDcard" in EASEUS, expand that partition to the whole card, then write verygreen's image to the card again and re-install. At that point, you should be able to access storage over USB from CM7 without turning off debugging or taking any other special steps other than "Turn on USB storage."
Click to expand...
Click to collapse
alright i'll give it a shot when i get home from work. is the verygreen image the same one found in the CM7 size agnostic SD thread?
"http://crimea.edu/~green/nook/generic-sdcard-v1.3.img.gz"
and when i delete all partitions except for "SDCARD" do i need to make that partition logical or active or anything?
again thanks for your help.
Dr. Light said:
alright i'll give it a shot when i get home from work. is the verygreen image the same one found in the CM7 size agnostic SD thread?
"http://crimea.edu/~green/nook/generic-sdcard-v1.3.img.gz"
Click to expand...
Click to collapse
Yep, verygreen is the author of that thread and image.
Dr. Light said:
and when i delete all partitions except for "SDCARD" do i need to make that partition logical or active or anything?
Click to expand...
Click to collapse
No, in fact you might be able to write the image without messing around in EASEUS at all--I'm just not sure if WinImage (or whatever) would write to the whole card or just one partition. I know if you tried to format it, Windows would only format the boot partition.