Hey all,
So I have UDP with Verizon. Got my phone the other day and activated it before I inserted my VZW sim card. Tethering worked fine until today (after Droid-Life posted about it), and now it will work for a few minutes and then I lose internet connectivity on both the phone and hotspot.
To get around this with my previous Moto X 2013, I used the wifi tethering apk from here: https://code.google.com/p/android-wifi-tether/ and then only allow one device at a time to connect. This app doesn't seem to work with Android L (or I can't get the settings right).
Is there anything else I can try? Or is there any way to limit devices with the stock tethering?
(edit)
Other info:
Phone is unlocked.
TWRP installed (phone tethered fine after TWRP installed)
Phone is rooted (same as above)
I installed Xposed today, started having issues. Uninstalled Xposed, still have tethering issue.
(edit2)
Wife's phone, a rooted VZW Samsung GS4 is also being flaky with wifi tethering. I'm guessing that it isn't my device tonight...
hbar98 said:
Hey all,
So I have UDP with Verizon. Got my phone the other day and activated it before I inserted my VZW sim card. Tethering worked fine until today (after Droid-Life posted about it), and now it will work for a few minutes and then I lose internet connectivity on both the phone and hotspot.
To get around this with my previous Moto X 2013, I used the wifi tethering apk from here: https://code.google.com/p/android-wifi-tether/ and then only allow one device at a time to connect. This app doesn't seem to work with Android L (or I can't get the settings right).
Is there anything else I can try? Or is there any way to limit devices with the stock tethering?
(edit)
Other info:
Phone is unlocked.
TWRP installed (phone tethered fine after TWRP installed)
Phone is rooted (same as above)
I installed Xposed today, started having issues. Uninstalled Xposed, still have tethering issue.
(edit2)
Wife's phone, a rooted VZW Samsung GS4 is also being flaky with wifi tethering. I'm guessing that it isn't my device tonight...
Click to expand...
Click to collapse
I have a similar issue but not quite the same. I am also on UDP vzw and the behavior that I get is that the hotspot connection to the Internet is barely usable at all. Some pages load, sometimes but often they timeout. But with all of this the connectivity on the handset itself is unaffected. I'm going to try a usb tether on my Mac with the HoRNDIS package soon to see how the speeds compare. Maybe it's just the wifi tether and sub will be okay?
There have been some that are specifically noticing DNS issues. Maybe that's where the root of the problem is.
Forrice said:
I have a similar issue but not quite the same. I am also on UDP vzw and the behavior that I get is that the hotspot connection to the Internet is barely usable at all. Some pages load, sometimes but often they timeout. But with all of this the connectivity on the handset itself is unaffected. I'm going to try a usb tether on my Mac with the HoRNDIS package soon to see how the speeds compare. Maybe it's just the wifi tether and sub will be okay?
There have been some that are specifically noticing DNS issues. Maybe that's where the root of the problem is.
Click to expand...
Click to collapse
Ever since I found out that VZW allows you to add the tethering package to your UDP line and not mess anything up, I bought it and have experienced zero issues. Before that, every few days I would have some bad DNS issues where google would work, but nothing else would. Now my phone is my ISP and I've had no issues.
My (current) network setup: phone (wifi tether) -> bridge computer (internet sharing) -> router (Asus AC66U) -> wired/wireless network.
I haven't tried the bridge computer as an actual network bridge as that caused some flakiness before... but that was when I wasn't paying for tethering. Eventually I'd like to use my phone as a 4g modem that is directly hooked up to my router.
My company is forcing us to Verizon which is great for coverage, not so great for features.
I use WiFi sharing a lot on my S7 T-Mo 930T but read that this is not an option on the 930V. Anyone know of a work around on the Verizon S7?
Thanks
You aren't by chance confusing WiFi sharing with tethering are you? When I read this post I made that mistake so I thought I'd ask. Tethering works fine if that is what you meant.
He is not talking about tethering. Look at the link he posted. He is talking about connecting to WiFi, then sharing that WiFi connection with other people. Scenario: Your friend wants to use your home WiFi, but you don't want to give him your WiFi password, so you can share your home WiFi with him through your phone. He won't be able to get onto your home WiFi without you granting him permission with your phone.
Correct. Also works great with chromecast at hotels. Also allows me to have all my devices set to connect to my phone vs. Having to put in a new hotel passowrd on each device. Kindel, tablet, laptop need zero configuration each time I travel. Works great on overseas flights too.
Verizon *sigh*
"Mobile HotSpot on AT&T grandfathered Unlimited Plan" If you have a regular At&t plan the hotspot is easily employed...... I have the grandfathered plan that sends me the "Call 611 to enable."
Does anyone have a way to employ the mobile hotspot on the Galaxy G935A? Seeing as there is no root, is there any coding or permission tweaks I can try to get the Hotspot to work?
FoxFi works with tethering, but turns up a 10246 permission error for Hotspot. I though I had it when I kept the system from checking my plan with At&t.....But eventually, the system picked up on the blocking I employed.
Two main reasons for me to root are Viper4Android, which there is not get-around. The second is the Mobile Hotspot. When I travel with my kids, they used to use my Rooted G3 to play Youtube, games, and interactive apps to keep them busy on long road trips.
My choices, buy a G935F on Ebay and root it.....but then I would have to sell my G935A.
Someone miraculously figures a way to root.
I find a work-around and change "permissions."
I'm leaning toward the new phone, just hate spending $700 on Ebay with electronics.......
Any help is appreciated, even the slap of reality to "just get the F" and quit screwing around with the A.....
-dmxinc
dmxinc said:
"Mobile HotSpot on AT&T grandfathered Unlimited Plan" If you have a regular At&t plan the hotspot is easily employed...... I have the grandfathered plan that sends me the "Call 611 to enable."
Does anyone have a way to employ the mobile hotspot on the Galaxy G935A? Seeing as there is no root, is there any coding or permission tweaks I can try to get the Hotspot to work?
FoxFi works with tethering, but turns up a 10246 permission error for Hotspot. I though I had it when I kept the system from checking my plan with At&t.....But eventually, the system picked up on the blocking I employed.
Two main reasons for me to root are Viper4Android, which there is not get-around. The second is the Mobile Hotspot. When I travel with my kids, they used to use my Rooted G3 to play Youtube, games, and interactive apps to keep them busy on long road trips.
My choices, buy a G935F on Ebay and root it.....but then I would have to sell my G935A.
Someone miraculously figures a way to root.
I find a work-around and change "permissions."
I'm leaning toward the new phone, just hate spending $700 on Ebay with electronics.......
Any help is appreciated, even the slap of reality to "just get the F" and quit screwing around with the A.....
-dmxinc
Click to expand...
Click to collapse
Can someone help me try this? THERE ARE NO MODIFICATIONS HERE
-I opened the mobile Hotspot app, set it up while I was connected to my home wifi network.
It worked, but used my home network as the hotspot.
-Next, I shut my wifi off and expected the error, but the phone hotspot transferred to the 4g, as long as I didn't turn the hotspot off.
I also tried this at an open cafe wifi hotspot, then turned off the phone wifi again, the hotspot remained working as long as I didn't hit the back button.
* I did get a tetherprovision.apk error, but it didn't shut the phone mobile hotspot off.
I tried this on my wifes S6 Edge, but it didn't work. Can someone try the S7 and S7 edge G935A
***To make sure it was the phone hotspot, I checked ip addresses before and after the WIFI was turned off. Ip adress changed from where I live to a place in Maryland, so fairly sure it wasn't just a fluke, but that is why I need someone to test it........Thanks
-dmxinc
I had the same challenge (unlimited data but no tether provisioning) and wanted to tether without giving up my awesome plan or pissing off my employer (my corporate plan includes international LTE roaming -- amazing!). Being unable to root and having unsuccessfully tried FoxFi (gave me an error message about internal connectivity or somesuch) I discovered Samsung already has an app for this called SideSync. It requires a USB cable but is able to set up its own hotspot.
I'm using a Mac laptop with SM-G930A and after installing SideSync on both the Mac and the phone, and launching both, I can detect the phone connection (apparently this works better when the app is running in the background but not on its home screen). Then I can click the "More" button on the Mac side and launch "Enable Mobile Hotspot". You'll need to give it MTP and several other access permissions the first time, but it should create and configure a WAP of the form "SIDESYNC_HOTSPOT_##:##" and connect the Mac to it. This works even if your phone provisioning wouldn't normally allow it. Easy!
aikidork said:
I had the same challenge (unlimited data but no tether provisioning) and wanted to tether without giving up my awesome plan or pissing off my employer (my corporate plan includes international LTE roaming -- amazing!). Being unable to root and having unsuccessfully tried FoxFi (gave me an error message about internal connectivity or somesuch) I discovered Samsung already has an app for this called SideSync. It requires a USB cable but is able to set up its own hotspot.
I'm using a Mac laptop with SM-G930A and after installing SideSync on both the Mac and the phone, and launching both, I can detect the phone connection (apparently this works better when the app is running in the background but not on its home screen). Then I can click the "More" button on the Mac side and launch "Enable Mobile Hotspot". You'll need to give it MTP and several other access permissions the first time, but it should create and configure a WAP of the form "SIDESYNC_HOTSPOT_##:##" and connect the Mac to it. This works even if your phone provisioning wouldn't normally allow it. Easy!
Click to expand...
Click to collapse
I am on Win 10, I will try and find Sidesync, or an equivalent thanks! But, that is exactly what I was looking for!
If I find a Windows equivalent, I will repost.
Thanks again,.
I found it but it says both devices utilize the same wifi connection. Will it Direct Connect them and use 4g as the wifi?
dmxinc said:
I am on Win 10, I will try and find Sidesync, or an equivalent thanks! But, that is exactly what I was looking for!
If I find a Windows equivalent, I will repost.
Thanks again,.
I found it but it says both devices utilize the same wifi connection. Will it Direct Connect them and use 4g as the wifi?
Click to expand...
Click to collapse
Not sure what you mean by utilizing the same wifi connection -- It is NOT the WiFi Direct feature if that's what you mean..if the phone is connected in that mode, this will need to be turned off first. Mine handles the setup of the hotspot automatically (at least on Mac). It's a little wonky but usually works on the first try. And yes... once it's working, the phone shows that it's got a device connected via wi-fi sharing icon, and the laptop shows it's using SIDESYNC_HOTSPOT.
aikidork said:
Not sure what you mean by utilizing the same wifi connection -- It is NOT the WiFi Direct feature if that's what you ttle wonky but usually works on the first try. And yes... once it's working, the phone shows that it's got a device connected via wi-fi sharing icon, and the laptop shows it's using SIDESYNC_HOTSPOT.
Click to expand...
Click to collapse
If figured it wasn't the Direct. It installed and loaded right up, but it disconnected on the PC side every few seconds. I think it might be my A.V. software......I'm going to mess around with it this weekend to see if that's the issue. Thanks for tips.
So sidesync is a hotspot app, must be installed on all devices that want to connect to hotspot (in this case galaxy g930a). Is this correct?
WIFI TETHER for Sprint S7 Sorry for typo
I am on a Sprint S7 G930PVPS4APK1 ANDORID VERSION 6.0.1. I live in the sticks and wifi tether is the only way I can get high speed for home. The quick reboot method no longer works. I have rooted other phones, but am no expert, and hesitate to try rooting my S7. Can't afford the ins if I brick it.
I have found From lots of reading (thanks to many) that using PDAnet+ alows me to use USB tethering to a laptop. The lap top will then work as a WIFI hotspot with what seems like reasonable speed. I was able to use the wifi on a tablet and stream Netflix, which is what I really want. Works great. It will be worth the $8 bucks to unlock PDAnet for unlimited data. So this works as Jan 2017 for free wifi hotspot.. I have seen no other recent references to this. i should mention i have unlimited data so have not
I do have a question While the WIfi hotspot from the tethered laptop works great, I can not seem to get my Chrome cast to connect to it. I really need this. It satys problem connecting to wifi router. I can't figure out why. The only clue? I constantly get a pop up on the laptop saying intel intelligent wifi is disabled while app running? any ideas would be very helpful TIA
I installed u930 firmware and got my hotspot working with the "dun" addin. On my s5 and in the past,I could turn on and it will pretty much stay on, if there is wifi data connection or not. This is very useful to me because I have a printer in my network that I need access to pretty much all the time. With my new s7 however I can only connect if there is a relatively strong wifi data signal. If there is no wifi the hotspot resets and will not turn on, leaving my printer useless and off line. Is there a work around here, or something I can do about this?