Att flipout, I tried flashing rom without Blur and have PASS. After that when I turn on my device I have:
critical error:
CC00
DBAD
after some seconds
Bootloader
91.10
Err: A5,90,56,00,22
I tried flashing other roms, but again have PASS.
After some flasing, battery of my flipout is low and I can't flash it again.
And now battery is NOT CHARGING.
Yeah, I'm getting the same thing. Tried flashing other ROMs, but have the same outcome. Not sure what else to do, except give up and move on.
Edit: After some intensive research over the past few hours, I've found the fix! The other SBF files are not signed for the AT&T Flipout, so they fail the signature check when booting up. I found the official AT&T Flipout SBF after a while, and flashed it. It worked! My Flipout booted on the first try.
Can't post links, but google "flipout mb511 at&t firmware". Mine was the first link to come up.
Related
The screen reads;
Bootloader
30.04
Err: A5, 70, 00,00,23
Battery Ok
Ok to Program
Transfer Mode:
USB
Any advice?
Your answer is literally all over these forums, but all you need to do is download the sbf 2.3.32 from the mydroidworld forums
http://www.mydroidworld.com/forums/droid-x-discussion/
Then flash it...
^ Pretty much what he said, I had the same problem although VZW replaced my phone because for some reason at the exact same time mine failed the update, I lost network connectivity after I reflashed via RSD. VSW told me that somehow my signal radio got fried...
On DX number 4 since release so far heh.
Hey guys. I'm kinda new to this so forgive me if I say something wrong or confuse you guys. So I bought my Gt540 on ebay. Little did I know that it was branded by a Portuguese company called TMN. So I decided to flash my phone with different ROMS with the kdz updater. Essentially I wanted to unbrand it. So every time I flashed it with a different ROM other than the branded TMN ROM I keep getting errors such as com.android.phone and com.android.settings has stopped unexpectedly. The phone error would constantly pop up. The settings error would pop up when I would access the settings. When I flash it with the original TMN ROM the phone works perfectly but with all the excess bloatware. I also tried the goldcard thing and I don't even know if that works for this phone or not. also when flashing the ROMS my applications would still be there afterwards even my settings are intact. The roms i've tried are all v2.1. I've spent many hours trying to unbrand this phone and install a generic ROM on it, so a point in the right direction would be nice. Thanks.
why dont you flash a fastboot enabled kdz then install recovery and CM7
Wipe
Have you fully wiped your data?
Fastboot?
I think you need fastboot for it (not sure).
To go to fastboot, you need to hold the camera button while turning on your phone (when the LG logo comes up). If the screen becomes blank, then you've entered fastboot mode. More info can be found at http://forum.xda-developers.com/showthread.php?t=802895. It has a ROM that has fastboot, so you can flash that. (The thread provided is not only for the update for Android 2.1 but for fastboot also).
Sorry for unnecessary additional post.
Hi,
a friend Brought me a Motorola Milestone 2 which had been sent to him, however it was asking me/him for a motoblur account, so I entered mine and it said name/password was incorrect, so I decided to flash it after many attempts to hard reset etc etc
used RSD Lite 4.7+patch and 5.6 with a few of the softwares found in the super firmwares thread but to no avail I got a "code group XX" verification failed and my screen shows "critical error DEA1"
I've tried many firmwares since then however none of the work
I can't get into "android recovery mode" as soon as I put the battery in, I get code corrupt battery ok to program etc etc
I have bootloader 70.13
don't know what firmware was on it, as I had no access to the system
what to do?
PS: I have read many threads about this and tried everything.
EDIT: FULL STORY BELOW. SKIP TO SECOND REPLY FOR UPDATE!
900A, AT&T, WAS 4.4.4. I rooted my phone with towelroot by downgrading via ODIN then reflashing 4.4.4. I've had the phone for a year and wanted to experiment with some custom roms--specifically Twi5ted Lollipop. The version I found last night was V3. Anyways I followed the instructions of installing safestrap then attempting to create a partition to host the mod. Every time I tried to boot the partition I would wait 12 minutes with nothing but a black screen (I presume a bootloop.) After reading some posts here I found it requires a clean flash--not a dirty flash. So I used safestrap to backup, then I wiped it and installed the mod. Nothing--still black screen. I then attempted to restore the backup I saved--fails every time.
At this point being the noob I am, I started to get very concerned. I went into advanced wipe and for some reason selected 'system' and wiped it. After a reboot, it shows the Samsung logo, goes blank, vibrates then goes back to the Samsung logo. I went into the standard bootloader and attempted to restore to factory settings but there is nothing to restore of course cause I wiped everything.
I'm currently at work bored as heck cause my phone is wiped. I can still go into download mode thankfully. Should I have no problems flashing stock via ODIN when I get home on my lunch break? Which stock firmware should I flash for this phone?
Thanks!
Unfortunately my lunch break brought me no good news. I downloaded stock found here: http://forum.xda-developers.com/showthread.php?t=2714455
After I flashed all the files (Except BL) when it boots, it get's to the Samsung logo--freezes halfway through then goes blank with the blue LED light on. I waited 10 minutes just to see what it does with no luck.
Another thing I found was weird-why when I boot does it still say 'Custom' when I flashed the stock firmware?
I really hope I don't have to drop $650 on a new phone Any help would be incredibly appreciated. Thanks guys!
DETAILED INFO: KOT49H. 6900AUCU1ANCE
MODEL: SM-6900A UD
FCC ID : A3LSMG900A
GALAXY S5 AT&T
why didn't you also flash the bootloader?
mike-y said:
why didn't you also flash the bootloader?
Click to expand...
Click to collapse
AT&T bootloader is locked right? Regardless I tried flashing the bootloader as a last resort and ODIN failed. Figured it just confirmed what everyone else said that it's locked.
Is there a specific way I need to flash the files? Like one at a time?
Do I need to restore factory settings/delete cache THEN flash each? or vice versa?
Am I basically screwed since I have AT&T?
:crying::crying::crying::crying:
FIXED!
After flashing 4.4.2 several times and trying different things, I came across this thread which finally brought my phone back to life. Thanks XDA!!!
http://forum.xda-developers.com/att...w-to-unbrick-flash-to-stocknce-g900a-t3077652
Hello, i have a Moto g4 Amazon edition (XT1625) and all of a sudden, it got into a bootloop for no reason. it is not bootloader unlocked, not rooted, totally stock. so i did some research and tried some things, wiping cache, wiping data and nothing. so my next bet was to try to flash the same firmware or anything that would make the phone Boot up.
I tried flashing the 6.0 firmware, 7.0 firmware, at least, i tried 6-7 different firmware with no success (all of them said pre-validation error, like i was trying to flash a older version) but one. the only one that actually flashed, got me booting into recovery saying "this is an unauthorized sw" and that's it.
i got another exact same phone fully working and i noticed it recieved the OTA update NPJS25.93-14.7-3 and as far as i know this the December Security patch.
is there any link to download the full ROM with this update? or the September 2017?
i'm guessing those are the only firmware that could resurrect this phone right now...
Try this link for stock firmware
https://firmware.center/firmware/Motorola/Moto G4 (Plus)/Stock/
Thanks for the reply.
i downloaded the rom and tried flashing it without the .gpt and the bootloader.img for safety reasons...
it flashed all okay and when it booted it shows the moto logo and turns off every time i try to turn it on... if it's connected to my computer, it just reboots into boot logo.
and yes, i then tried flashing the rom with the .gpt and bootloader file and no result.
is there any way i can fix this bootloop?
this was actually the first problem the phone had, no root, no unlocked bootloader and all of a sudden went into bootloop..
mtvictor said:
Thanks for the reply.
i downloaded the rom and tried flashing it without the .gpt and the bootloader.img for safety reasons...
it flashed all okay and when it booted it shows the moto logo and turns off every time i try to turn it on... if it's connected to my computer, it just reboots into boot logo.
and yes, i then tried flashing the rom with the .gpt and bootloader file and no result.
is there any way i can fix this bootloop?
this was actually the first problem the phone had, no root, no unlocked bootloader and all of a sudden went into bootloop..
Click to expand...
Click to collapse
You found some solution, I have the same problem.
mauri550 said:
You found some solution, I have the same problem.
Click to expand...
Click to collapse
Nothing has worked so far, the phone is laying like a brick for the moment.