ok i was playing with Ak-47 app on The dudes cupcake then next thing you know it says Blank sd card now I cant use any apps and under settings<SD card & storage it says total space and availalable space unavailable and unmount sd card. When I go to notifications bar where it says Blank SD card it suggest to re format sd card....What should I do? even when I mount onto pc under removable **** it suggest to reformat. What should I do? I dont wanna brick my phone. Also it wont let me see any files under removable disk.
duan19 said:
ok i was playing with Ak-47 app on The dudes cupcake then next thing you know it says Blank sd card now I cant use any apps and under settings<SD card & storage it says total space and availalable space unavailable and unmount sd card. When I go to notifications bar where it says Blank SD card it suggest to re format sd card....What should I do? even when I mount onto pc under removable **** it suggest to reformat. What should I do? I dont wanna brick my phone. Also it wont let me see any files under removable disk.
Click to expand...
Click to collapse
chances are u might have to start from fresh n format ..
http://www.sdcard.org/consumers/formatter/
?
What if I perform a wipe and Alt-s...will that work or will it brick my phone.
duan19 said:
What if I perform a wipe and Alt-s...will that work or will it brick my phone.
Click to expand...
Click to collapse
wiping doesnt do anything to your sd card
Refomat?
Well Could I just use the onscreen selection on my phone to reformat or will this cause problems.
duan19 said:
Well Could I just use the onscreen selection on my phone to reformat or will this cause problems.
Click to expand...
Click to collapse
that i dont know. i just use a card reader and format then depending on what build im using i wipe and start fresh
same thing happened to me last week on one of the dudes builds. My sd card was ruined. I tried to reformat it and then repartition it but it wouldnt let me repartition even though i deleted the old one. I messed with it for hours, before some one told me that it was ruined. all the transfering of info back and forth fried it i guess. I ended up buying a new one, this time class 6 (old one was class 2) I got it for 20 bucks (8gb) not to shabby of a price! sorry for your misfortune. Good luck
duan19 said:
ok i was playing with Ak-47 app on The dudes cupcake then next thing you know it says Blank sd card now I cant use any apps and under settings<SD card & storage it says total space and availalable space unavailable and unmount sd card. When I go to notifications bar where it says Blank SD card it suggest to re format sd card....What should I do? even when I mount onto pc under removable **** it suggest to reformat. What should I do? I dont wanna brick my phone. Also it wont let me see any files under removable disk.
Click to expand...
Click to collapse
The same thing happened to me about 4 days ago, however Im running cyangones 3.4 Rom not the dudes, tell me ....were you running any themes at the time like the hero theme or any other? Are you using apps to sd as in do you have your sd card partitioned ? Im trying to figure out why this happened to me also, as of right now it has happened twice in 4 days then, I wiped my phone, reformatted / repartitioned my sd card and am not using any custome theme with cyanogens 3.4 rom and it seems to be ok. I only have a few apps right now because I want to make sure it doesnt happen again before I load up my sd card again with apps.
i had no themes and i was using app2sd. but i wasnt using any apps at the time.. just thought i would ad my 2 cents
djwaz said:
The same thing happened to me about 4 days ago, however Im running cyangones 3.4 Rom not the dudes, tell me ....were you running any themes at the time like the hero theme or any other? Are you using apps to sd as in do you have your sd card partitioned ? Im trying to figure out why this happened to me also, as of right now it has happened twice in 4 days then, I wiped my phone, reformatted / repartitioned my sd card and am not using any custome theme with cyanogens 3.4 rom and it seems to be ok. I only have a few apps right now because I want to make sure it doesnt happen again before I load up my sd card again with apps.
Click to expand...
Click to collapse
thats how it started with my sd card..but when i reformatted i went to Jacman 1.62 build then thatts where my card just got fried...partition table got corupted
Yes maybe because its class 2 8 gigs
And yes to other gut I does has some hero in the dude 1.3r2.
Yes maybe because its class 2 8 gigs
And yes to other gut I does has some hero in the dude 1.3r2. bout to try to reformat I guess tell you what happens in a minute.
ok
I reformatted then put files back on G1(including the dudes cupcake 1.3r2(cant give up on the perfect mod lol)) then wiped and Alt-s....only diffrence this time is that i am gonna use appmanager and not put everything on class 2 8 gig so it will not burn out...and hopefully it want destroy my sd card.Thankx to everyone you guys were a big help.
very interesting topic....
same here:
I tried with 3 other sdcards, 2 of them are 100% ok, NO GO, doesnt work anymore. First I thought that my G1 reader has a problem, some time it works, some time not. Im on dudes 12b with apps2sd. The fact that no card works tells me:
- Phone error
or
- Software problem (really strange if this is the problem)
I wipe right now and will tell you if the card works again....
i had similar problem last week when switching from cyan 3.4 to dudes 1.3 i first tried just doing an alt - w and that gave me a lot of errors and force closes so i started over and reformatted/repartitioned my sd. Now my sd card doesnt read when i plug into pc but still works in phone. everytime i want to change/edit sd i have to pull sd out and use an adapter..it sucks cuz the lil sd latch is such a pain to open and close on the g1..
ok wipe didnt anything... really strange thing I can do nothing anymore, card is not readable (in pc it is readable, but not in my g1)....
Config:
Dudes 1.2b
No themes, no extras
APPS2SD, 500 MB EXT Partition
8 GB Class 6 Card
If anyone has a hint for me, any help is welcome.
could this have something to do with apps2sd... this is happening to me as well, and it only started when i switched from jac 1.4 to the dudes 1.3rc1 it works good for about 24 hours sans the bluetooth issue. then the next time i check the phone its all whacked out and says to reformat the card.
Found this, hope that helps, unfortunately I dont have an external reader here:
source: http://androidcommunity.com/forums/f7/unable-to-retain-formatting-on-sd-card-17338/index2.html
Turns out this is no more than an annoyance affecting the 1.5 JF builds. (not sure it's exclusive to those).
Anyway, long story short. The phone will always complain about the partitioning on the sd card and offer to "fix" the problem by re-formatting.
The key to the problem is to reboot the phone after the card has been re-partitioned. This will make the annoying pop-up dissapear and keep the partitioning table as defined.
Blank
Rerun apps to SD, uninstall reinstall all listed apps.
I had had this happen also. But I think most of it was my doing. I have a bad habit of not removing device safely after I copy files, I just use the eject button lol.. my p.c. even told me that I had removed usb device before the files were finshed bing prossed.. well whatever happend it didn't fry my card I just had to reformat it and. Run martins great skrip over agin and it was good to go.. I even went to buy a new usb cable just in case lol .. on hero/rosie running smooth ; )
Hi.
I have installed ChuckyROM (gone through the HSPL process).
I have then downloaded several different android builds and the same thing happens when I follow the SDCARD instructions.
I load the files onto a 2GB SDCARD, Plug it into my device, restart the device, tap the CLRCAD.exe first then tap HaRet.exe
I loads into a black screen with some very small text in the top left corner, then this text slowly fades away and nothing happens.
Any ideas?
I've heard you need at least 1.5 gig of free space on your SD card to install android, so make sure you don't have other files on it.
Also, give it 15 minutes to let it do it's thing on first boot, a lot of stuff has to be created and initialized.
Being going for over 30 mins now, and I completely reformatted the SD card before I put the android files on it.
Try re-formatting your SD card within Windows and ensure it is formatted to 32kb clusters, this is one of the things that can cause an issue.
ps what radio are you using?
SORTED
Reformatted my SDcard and now its working.
Thanks.
Got Android with HTC Sense running - and it is awesome.
I have to take my SD card out for windows to boot up, is there a way to fix this its such a PITA to restart my phone
Do you use an auto loader like EBL?
yes, i think you might be using an autoboot for android like EBL with booting time like 3 seconds
no i start just like normal, my screen stops at the pink and white stick together and stays that way unitl i remove the SD card, then the radio version come on at the bottom and it boots like normal but if i dont remove the SD card it will just stay at teh stick together sreeen
You may get this issue if the sd card is corrupt. Try checking it for errors using a card reader on your pc.
Also I had issues with winmo when my card was almost full. I deleted one of my android builds and winmo loaded and ran fine.
Or it could possibly the files on your card not readable by windows. I always wondered about those files that started with .files (starting with a period)
Hello XDA fourms, i have just today bought a nook color. I have been researching rooting it so i can read my manga and comics on it. I have decided to root it through a micro sd 4gb card so that if i want to use my nook regularly i can. now the problem is i can not understand half the things people say to do to achieve rooting my Nook color. can any one help me or redirect me to an easy place to teach me how to do this?
That's exactly how I started out. You can find instructions on the "[ROM][CM7] [v1.3] Size-agnostic SD Card image and CM7 installer for SD Cards." thread in the "Nook Color Android Development" forum. I'm no Android expert, being more a console Linux & C/Forth kind of guy, but it worked for me.
Since I spent most of my time in stock and only had a few apps I actually used on the card, I ended up rooting the stock nook with a manual nooter to install those apps in the Nook Color stock home page ... but using the SD card install for a month was quite useful in working out whether I wanted to root the stock B&N firmware or install a CM7 firmware instead.
ok so i tried to make an sd card out of my 4 gb but it didnt work so i decided to reformate it and now it only has 117 mb! wth? im so confused...
Tom32090 said:
ok so i tried to make an sd card out of my 4 gb but it didnt work so i decided to reformate it and now it only has 117 mb! wth? im so confused...
Click to expand...
Click to collapse
when you write the image to the SD card the partition is 117mbs. windows can only see that partition (there is actually 4 on the card after the image is written) that's why when you hit reformat it reformatted it to 117mbs. boot your nook up into stock form with the SD card in it, then go into your settings and hit "unmount SD card" then hit "reformat". That'll get you back to 4gbs.
ok great! ill try that thank you very much! but now how do i get it rooted?
If you "want to root it through a micro sd 4gb card so that if i want to use my nook regularly i can" ... you aren't really rooting the device, you are just making an SD card that will boot up its own system and leave the stock system in the built-in flash alone. Then if the card is pulled out (or replaced with a non-bootable SD card), the bootloader skips the SD card and boots from the internal flash.
If you are using a Windows box, as nook711 explained, the regular Windows format will not change existing SD partitions, so it will just format one relatively small partition on the SD card. To reformat back to a single clean SD partition on the Windows side, google for Panasonic SDFormatter.
As far as how to get that card to work as an SD-boot card ~ its hard to say, since you didn't say what went wrong the first time you tried it: which imager program did you use? did you power the Nook down all the way before rebooting it? Did it hang, or did it fail to boot and start up as a stock Nook Color?
Unless of course I misread you: if you want to root it using a SD card in a way that allows it to also be used as a regular Nook ~ that is, the third party apps show up in what looks like a regular B&N Home page ~ that is a manual noot you want to do. The instructions for doing a manual noot are in the "[NC][1.2][1.3] ManualNooter 4.6.16" thread. However, those are instructions for a 1.2 or 1.3 version. Instead of using the manualnooter file described in the opening post, skip ahead to page 175, and look for GMPOWER's post #1745. The "LINK" downloads a manualnooter file that seems to work for a stock Nook Color 1.4.1 ~ at least, that's the one I've used and now I have what looks like a stock Nook Color, except with Crackle, Crunchyroll, YouTube, OpenIntents and DolphinMini apps showing up on the B&N home pages.
BruceMcF said:
If you "want to root it through a micro sd 4gb card so that if i want to use my nook regularly i can" ... you aren't really rooting the device, you are just making an SD card that will boot up its own system and leave the stock system in the built-in flash alone. Then if the card is pulled out (or replaced with a non-bootable SD card), the bootloader skips the SD card and boots from the internal flash
If you are using a Windows box, as nook711 explained, the regular Windows format will not change existing SD partitions, so it will just format one relatively small partition on the SD card. To reformat back to a single clean SD partition on the Windows side, google for Panasonic SDFormatter.
As far as how to get that card to work as an SD-boot card ~ its hard to say, since you didn't say what went wrong the first time you tried it.
Click to expand...
Click to collapse
so what happen on my first try was i used winimage to write the genertic sd card file on to it. i than put update-cm-7.1.0-encore-signed.zip on the card. my nook was off and i turned it on. it did not boot from the sd card. i have not tried holding the n button to see if that worked yet. i do have the sd card formatted and i have already formatted the card back to 4 gb. Next i was going to do the same steps but try and hold the n button
update:so i tried the N button but it didnt boot the sd card... i just dont know what im doing wrong!?
if it did not boot from the sdcard then I would suspect that the image did not write to the sdcard correctly. the nook will automatically look at the sdcard boot first.
did you unzip the image file before writing it to the card?
did you write the image as admin in the winimage?
After writing the image to the sdcard remove it from your computer and then plug it back in the computer, if it wrote correctly it should now say "boot"
"my nook was off and i turned it on. it did not boot from the sd card"
It only boots if it is turned on from a powerdown. If it just went to sleep to save the battery, and a quick tap of the power button can wake it up, its not powered down, its only sleeping.
When its awake, hold the power button, wait for the "do you want to turn it off completely" dialog, keep holding the power button, and it will turn off. That is a complete power down. Then put in the bootable SD-card, and hold the power button until it turns on ~ it ought to boot off the card instead of off the Nook internal flash.
Like any Android device, it will take a while to go from the boot screen to the home screen on the first power-up, but you'll see the skaterboy droid in a couple of minutes and know that its grinding through the process of setting up the CM7 system.
And regarding the CM7 update file ~ looking in my PC file system, that's the same CM7 update file I used.
nook711 said:
After writing the image to the sdcard remove it from your computer and then plug it back in the computer, if it wrote correctly it should now say "boot"
Click to expand...
Click to collapse
it does say "boot" but it still does not work
BruceMcF said:
"my nook was off and i turned it on. it did not boot from the sd card"
It only boots if it is turned on from a powerdown. If it just went to sleep to save the battery, and a quick tap of the power button can wake it up, its not powered down, its only sleeping.
When its awake, hold the power button, wait for the "do you want to turn it off completely" dialog, keep holding the power button, and it will turn off. That is a complete power down. Then put in the bootable SD-card, and hold the power button until it turns on ~ it ought to boot off the card instead of off the Nook internal flash.
Like any Android device, it will take a while to go from the boot screen to the home screen on the first power-up, but you'll see the skaterboy droid in a couple of minutes and know that its grinding through the process of setting up the CM7 system.
And regarding the CM7 update file ~ looking in my PC file system, that's the same CM7 update file I used.
Click to expand...
Click to collapse
Yes i did shut it off and than turned it on but is still does not work?
i have also been looking at video on youtube. but every single one tells me something different. so far the one i found that seems to be the closest to what im trying to do is this one http://www.youtube.com/watch?v=P4nenR-mNo0 but even so i feel like the more i watch the more confused i get
There are only three things that come to my mind:
(1) What is the make and class of the microSD card? That's not from personal experience, but it shows up in multiple HowTo guides, both here and on other sites. I used a Kingston Class 4 8gb microSD card, but the preference seems to be for SanDisk Class 4.
(2) A generic image is likely to work best if its written onto a "like new" fully formatted SD card ~ I have seen a few YouTube clips of various rooting efforts where formatting it with the Panasonic SDFormatter Windows executable succeeded after the prior effort had failed.
Edit: the YouTube clip you posted is the first one where I saw advice to use the Panasonic SDFormatter. However, other than that, I mostly followed the xda How-To.
I'd note that even though the the CrashTechDummies YouTube clip is from April, 2011, they are using a HowTo guide for a image that is older than the "size-agnostic" image in the "Size-agnostic" How To guide, so they have to do several things by hand that are handled automatically by the "Size-agnostic" image.
(3) What is your hardware for writing SD images? USB-port card writers sometimes need to be safe-unmounted with the USB unmount tool before popped out. I've run into that before in a different context.
If its not one of those, then I got nothing, sorry. The part between copying the CM7 file onto the generic image and seeing the CM7 droid skaterboy "just worked" for me.
BruceMcF said:
There are only three things that come to my mind:
(1) What is the make and class of the microSD card? That's not from personal experience, but it shows up in multiple HowTo guides, both here and on other sites. I used a Kingston Class 4 8gb microSD card, but the preference seems to be for SanDisk Class 4.
(2) A generic image is likely to work best if its written onto a "like new" fully formatted SD card ~ I have seen a few YouTube clips of various rooting efforts where formatting it with the Panasonic SDFormatter Windows executable succeeded after the prior effort had failed.
(3) What is your hardware for writing SD images? USB-port card writers sometimes need to be safe-unmounted with the USB unmount tool before popped out. I've run into that before in a different context.
If its not one of those, then I got nothing, sorry. The part between copying the CM7 file onto the generic image and seeing the CM7 droid skaterboy "just worked" for me.
Click to expand...
Click to collapse
ok i reformatted it with Panasonic reformat and i am using a 4 gbsandisk micro sd and it has a 2 with a circle around it
Tom32090 said:
i have also been looking at video on youtube. but every single one tells me something different. so far the one i found that seems to be the closest to what im trying to do is this one http://www.youtube.com/watch?v=P4nenR-mNo0 but even so i feel like the more i watch the more confused i get
Click to expand...
Click to collapse
there's lots of ways to get to the end result, don't get confused we will help you through the process.
Now that being said:
This was my process
* reformat your SD card again using the stock nook
* download "windisk32 image writer" (easier I think then winimage)
* download "verygreens, genenric 1.3image.zip"
* unzip the image.zip to your desktop (using 7zip)
* open windisk32, click the blue folder and find the image file on your desktop for generic 1.3
* select your corresponding drive to your sdcard hit write
*when finished remove sdcard and reinsert it into computer
* download (cm7.1 or cm7.2)
* open up " my computer" on windows
* drag "cm7.1 or 7.2" to the corresponding drive for sdcard (should say boot)
* when finished right click hit eject when safe to do so remove sdcard
* insert sdcard into fully powered down nook
* turn nook on (after a few it should go to a little Linux penguin) and install scripts should be running
* when it's done it'll power off
* wait a few minutes and turn the nook on, should boot into cm7 but first you should see the android riding a skateboard.
*while that's working download the gapps file
after you set up cm7 for the first time, shut it down.
* remove sdcard and reinsert it into your computer
* open up "my computer" and drag the gapps file to the sdcard drive
* when finished hit eject and reinsert the card into the nook and while holding the "n" power up the nook (should see the little Linux penguin again)
* when its finished it should power down againbthen just turn it on and set up Google
hope this helps
** again this is just what works for me and I have successfully done several different nook for friends, family and myself.
uh is there any way you could supply some links ? i mean i think i have alot of these things but iv been gathering it from doing reaserch so i justwant to make sure i have the right files
Tom32090 said:
uh is there any way you could supply some links ? i mean i think i have alot of these things but iv been gathering it from doing reaserch so i justwant to make sure i have the right files
Click to expand...
Click to collapse
verygreens image:
forum.xda-developers.com/showpost.php?p=12240928&postcount=1
windisk32:
www.askvg.com/win32-disk-imager-write-any-bootable-image-to-usb-drive-in-windows/
7zip:
download.cnet.com/7-Zip/3000-2250_4-10045185.html
nook711 said:
there's lots of ways to get to the end result, don't get confused we will help you through the process.
Now that being said:
This was my process
x reformat your SD card again using the stock nook
x download "windisk32 image writer" (easier I think then winimage)
xdownload "verygreens, genenric 1.3image.zip"
xunzip the image.zip to your desktop (using 7zip)
xopen windisk32, click the blue folder and find the image file on your desktop for generic 1.3
xselect your corresponding drive to your sdcard hit write
xwhen finished remove sdcard and reinsert it into computer
x download (cm7.1 or cm7.2)
x open up " my computer" on windows
xdrag "cm7.1 or 7.2" to the corresponding drive for sdcard (should say boot)
xwhen finished right click hit eject when safe to do so remove sdcard
xinsert sdcard into fully powered down nook
xturn nook on (after a few it should go to a little Linux penguin) and install scripts should be running
x when it's done it'll power off
* wait a few minutes and turn the nook on, should boot into cm7 but first you should see the android riding a skateboard.
*while that's working download the gapps file
after you set up cm7 for the first time, shut it down.
* remove sdcard and reinsert it into your computer
* open up "my computer" and drag the gapps file to the sdcard drive
* when finished hit eject and reinsert the card into the nook and while holding the "n" power up the nook (should see the little Linux penguin again)
* when its finished it should power down againbthen just turn it on and set up Google
hope this helps
** again this is just what works for me and I have successfully done several different nook for friends, family and myself.
Click to expand...
Click to collapse
Ok so i have gotten up to the part where it shutdown and i have no restarted it yet. I downloaded the gapps and now i have another question. if i want to open up the memory on the sd card that isnt being used willl it mess anything up? the video talks about using MiniTool Partition Wizard Home Edition 5.2 and i just dont want to mess up anything iv already down
Tom32090 said:
Ok so i have gotten up to the part where it shutdown and i have no restarted it yet. I downloaded the gapps and now i have another question. if i want to open up the memory on the sd card that isnt being used willl it mess anything up? the video talks about using MiniTool Partition Wizard Home Edition 5.2 and i just dont want to mess up anything iv already down
Click to expand...
Click to collapse
the unseen portion of the sdcard in windows will be seen in your nook
nook711 said:
the unseen portion of the sdcard in windows will be seen in your nook
Click to expand...
Click to collapse
ok so if i want to put thing on the card how would i do it? would my computer pick up the unused memory?
Tom32090 said:
ok so if i want to put thing on the card how would i do it? would my computer pick up the unused memory?
Click to expand...
Click to collapse
you can use the nook as a mass USB storage device. while on the nook plug the cord into your nook and then the USB side into your computer. the computer should pick it up as USB mass storage and show 2 drives, 1 for nook color and the other for sdcard. once connected you can put whatever you want on it.