power button beginning to peel? - Atrix 4G General

if you guys/gals could humor me and take a super close look at your power button and tell me what you see, i would appreciate it.
maybe, just maybe, im being anal, paranoid, whatever. this wouldnt be unusual for me as im super sensitive about my expensive electronics.....
but i swear one corner of my power button is starting to peel. one corner (botton right) looks like its starting to peel up. maybe im trippin'. im bout ready to bust out a magnifying glass and look at this thing (as soon as i can find one)

I can't see anything, but I have the feeling that my power button gets worn out from pressing. I don't know if I just became used to press the button or if it becomes easier to press, means I need less pressure almost like the spring is wearing out.
Sent from my MB860 using XDA App

mgymnop said:
I can't see anything, but I have the feeling that my power button gets worn out from pressing. I don't know if I just became used to press the button or if it becomes easier to press, means I need less pressure almost like the spring is wearing out.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Same feeling here, but I'm certain that I'm just used to it now. When I let friends play with my phone they struggle like I used to. Wimps

Man_of_Leisure said:
Same feeling here, but I'm certain that I'm just used to it now. When I let friends play with my phone they struggle like I used to. Wimps
Click to expand...
Click to collapse
lol! yeah thats my favorite. "how the hell do you turn it on?!! oh" "how the hell do you unlock it??!!! oh" --- MY phone *****!
But to the OP, yeah I notice my top left corner has a slight gap but isn't pealing.
To the above two posts, yes, the button on my atrix and my room mates have broken in since we got them a week ago. At first we were both pissed off because we couldn't turn the **** on. Now its almost tolerable although I would still appreciate an extra 1/2mm of button.
Also, my finger print reader area already looks 'worn.' We'll see how well it holds up. Always have that 1 year warranty and if it does break from normal use, you can always talk to ATT and have them give you a different phone...

Related

The Hero power button nightmare.

So the paint problem on my power button got worse after i picked at with my finger nail ONCE just curious on the construction like a RETARD.
what followed was a week of pain and humiliation. The paint started coming off slowly leaving my hand looking like i was touching glitter, It was like a flesh eating virus, the glitter continued and button started looking worse and worse so i decided Saturday that i would end this once and for all, i got out nail polish remover, a magic eraser, and a microfiber cloth and the result is a BARE bright RED power button that is visible from 20 feet away and looks absolutely horrible. What i also didn't expect that the nail polish remover also took some of the paint off the area around the button and off the side of the phone.
The end result is that my phone is now an embarrassment, fully functional, the rest of the phone is in perfect shape but no matter how well i keep care of it now it will still have a huge red button visible from 20 feet away.
*sigh*
looks pretty cool
Bust out a silver sharpie and give it a quick paint job.
Note to self: "Keep phone away from nail polish remover." I have a slight bubble developing on my End button. I'm hoping I don't have to scrape everything off. On the other hand you could go ahead and scrape off the paint on the Call button and have a nice Christmasy-looking phone. LOL
is this a good enough excuse to get an EVO the day it comes out?
god i am bummed out
Glod said:
is this a good enough excuse to get an EVO the day it comes out?
god i am bummed out
Click to expand...
Click to collapse
Duck tape fixes everything!!
Get small piece and stick it over the button.. Or take phone apart, rap duck tape around it.. In the process, dont break phone so you wont have to duck tape the entire thing together.
mine looks exactly the same dude.. :/
my back button even is starting to peel
I am afraid that if i start experimenting with paint and glue that my hero will end up out my apartment window.
no matter what i do it is always going to look bad, but seriously i need to make this less obvious.
did i mention that when the back light is lit on it, it is bright as hell too.
Glod said:
I am afraid that if i start experimenting with paint and glue that my hero will end up out my apartment window.
no matter what i do it is always going to look bad, but seriously i need to make this less obvious.
did i mention that when the back light is lit on it, it is bright as hell too.
Click to expand...
Click to collapse
Take it to sprint and say the paint just wore away. You are a heavy phone user and you dont like how this happened. Ask what you options are and say you would like to get the buttons replaced. They do the work for free if you are insured.
It's a nice pic nonetheless.
it looks like t-1000
Sent from my HERO200 using the XDA mobile application powered by Tapatalk
Mine just started peeling off last week. Not a heavy phone user, but regardless, the End Key is now peeling . I have insurance, so I'm debating on whether to take it in or not. If they can just fix the button, great. If not, well, we'll see. That and I'd likely have to RUU before taking it in (unless I just leave it powered off .)
Get some silver nail vanish and reverse the issue
Scratch everything off both the call and end buttons and just pretend it's supposed to be that way. That works for me, but I know it would bug some people.
Sent from my HERO200 using the XDA mobile application powered by Tapatalk
jcaliendo said:
Scratch everything off both the call and end buttons and just pretend it's supposed to be that way. That works for me, but I know it would bug some people.
Sent from my HERO200 using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
That's what I did. It really does not bother me. At least I don't have the dust issue. I don't trust a sprint tech taking my phone apart for those two buttons. It really looks alright when both buttons are missing the paint.
my phone end button is peel off too. I guess phone was never meant for moderate to heavey usage for end button imho.
jcaliendo said:
Scratch everything off both the call and end buttons and just pretend it's supposed to be that way. That works for me, but I know it would bug some people.
Sent from my HERO200 using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
At 1st I was horribly upset that I had to carefully scrape the paint off of the button. But it grew on me over time & I can use the phone without graying hairs over paint peel.
on mine is the power button and the return button too sprint said that they can send me another one phone
Same thing here mine looks exactly like urs :/ Anthink i,m goign tto try and mask it off and get some hobby paint..idk what color thou
I completely peeled my power button months ago. It's red, I'm over it.
The "back" button has been doing the same thing. The little back arrow is a blob of naked plastic now. I don't care since I'm getting an EVO.
There are threads at Sprint and other Hero forums where people have been trying to get Sprint or HTC to replace the phone because of this. I think only one person got lucky and was given a new phone.

Capacitive buttons not responding when phone not held in hand?

Anyone has this problem? For example if I lay the phone down on my bed, I won't be able to hit the back button. The entire touchscreen responds done though...
Anyone?
Sent from my Nexus One using XDA App
Yep.............
"You're holding it wrong."
That sounds very strange.
Well, I'd hate to say it, but are you "pressing them wrong"?
What I mean is, we all know the buttons are a little tricky, how the touch sensitive part is near the top of the button. Could it be you've trained yourself to easily press them the correct way while holding, but when it is lying down you end up pressing it lower? Due to the angle of your finger when you touch it?
I've never had any trouble when the phone was laying down, and just tried it out again right now. I do have to touch them in the exact same spot (shifted a bit higher) as when holding it.
When I first got my N1 I noticed the same. Just hit it a bit higher
Sent from my Nexus One
Yea I tried out suggestions by you guys, hitting higher did help!
Sent from my Nexus One using XDA App
Odd, I always had this problem, never considered it much of a problem. Mainly cause I hold it 99% of the time, but I did find that if I touch it lower, as in touch the bezel at the same time as I touch the button, no problem.
Sent from my Nexus One using Tapatalk
Clarkster said:
That sounds very strange.
Well, I'd hate to say it, but are you "pressing them wrong"?
What I mean is, we all know the buttons are a little tricky, how the touch sensitive part is near the top of the button. Could it be you've trained yourself to easily press them the correct way while holding, but when it is lying down you end up pressing it lower? Due to the angle of your finger when you touch it?
I've never had any trouble when the phone was laying down, and just tried it out again right now. I do have to touch them in the exact same spot (shifted a bit higher) as when holding it.
Click to expand...
Click to collapse
This! I thought the same thing as the OP when i first got mine, but you get used to it.
I've also experienced this... but as the others would say just hit higher or you'll get used to it.
Sent from my Nexus One using xda premium
Having vibrate on for button press helps a lot because of the issue with having to hit the buttons higher.
It does get a little annoying but small price for such a good phone really I'm loving it regardless. It does seem like a strange thing though I've not come across it on some of the other android phones I've had before.
Had never happened for me. Its the same if i hold it in hand or not.

Xperia Play Notification LED + Sanded Sides [little MOD](hardware)

I speak portuguese, but you dont need to understand everything.... the only thig that i says that is important is that the side with the triggers was just done and that after a day it would loses its white marks and became like the other
I have my play for a year now and it is in pretty bad state.... the construction quality is not the best...
and what more I care about is the power button because it is pretty much gone, I'm using apps to lock the screen and the home button to unlock...
found out that some one used a nail file to fix it, so I tried and it was better for the first 3 presses.... I noticed that the light was passing though the part I sanded down, so I did the same on the whole button.
I think It looks pretty cool and all the button lights up and catches more attention..
when its off, it is ice/transparent with the power icon in the middle...
########Update########
I'm the kind of guy that has no limits, if I something cool, I keep doing it till it finishes bad... but not this time!! I sanded down the side that has no triggers and it looks like a very dark wood with a lovely texture on it... have to fell it...
Tip. Try to do it all ways in the same direction, along the side so that you have these tiny lines right. Or use a very smooth(?) /for more delicate things sand paper and don't put any pressure on it...
Pics from the update here
https://docs.google.com/folder/d/0B3UKRg_ISzYKcFJUTXBUN09WOG8/edit
Sorry because I have to accept... can't make it public somehow.... just ask permit ion and I'll give you as fast as I can...
Sent from my R800i on 4.1.1
Wow that looks hardcore. I'm gonna try it cause I have the same issue too
That's so badass, I'm filing mine down right now even though my button works fine. It's looking awesome
I can't imagine why they covered up most of the LED to begin with...
I'm going to do that. I sanded down my other buttons so they're now black. Never thought to do the power button.
Sent from my Xperia Play using xda app-developers app
How can filing down the surface of a button make any difference to its responsiveness? surely the problem lies beneath the button with the connector?
I agree with you on the build quality. My power button hasn't gone yet but its probably on its way out. It didn't work at all a couple of days ago until I kept pressing it and luckily went back to normal normal responsiveness after that, can't be a good sign though. That and the R trigger on my device has lost its springiness, it goes down with little to no effort now. Still raises back to the surface so I suppose I should count myself lucky.
Looks cool anyway and might make it so the LED light can actually be seen in normal circumstances.
So if I sand down my power button it will make it do that? GENIUS. I never thought of that. Time to go find a nail filer.
Sweet. Going to try this in a few
I just tried it out, and the power button felt a bit weird so I licked my finger and got it a little wet, but with the case on you don't even feel it. But my god, it looks 100x better. Thank you dude.
Totally awesome. Made my other buttons black b4. Didn't think about power either. Awesome now I can actually see my notification light
Sent from my R800i using xda app-developers app
Beautiful!
Sent from my R800i using xda app-developers app
LordBattleBeard said:
How can filing down the surface of a button make any difference to its responsiveness? surely the problem lies beneath the button with the connector?
I agree with you on the build quality. My power button hasn't gone yet but its probably on its way out. It didn't work at all a couple of days ago until I kept pressing it and luckily went back to normal normal responsiveness after that, can't be a good sign though. That and the R trigger on my device has lost its springiness, it goes down with little to no effort now. Still raises back to the surface so I suppose I should count myself lucky.
Looks cool anyway and might make it so the LED light can actually be seen in normal circumstances.
Click to expand...
Click to collapse
The surface between the back of the button and the back cover...
Sent from my R800i on 4.1.1
Glad you guys liked!
I'll sand the buttons because they re wearing off anyway... didn't think of that...
Have any one though about the sides of the device, make it all black? From like the first mouth the paint/metal effect has came out a little... I'll do that when I get home
Sent from my R800i on 4.1.1
LordBattleBeard said:
How can filing down the surface of a button make any difference to its responsiveness? surely the problem lies beneath the button with the connector?
I agree with you on the build quality. My power button hasn't gone yet but its probably on its way out. It didn't work at all a couple of days ago until I kept pressing it and luckily went back to normal normal responsiveness after that, can't be a good sign though. That and the R trigger on my device has lost its springiness, it goes down with little to no effort now. Still raises back to the surface so I suppose I should count myself lucky.
Looks cool anyway and might make it so the LED light can actually be seen in normal circumstances.
Click to expand...
Click to collapse
I think the R button loses its springiness because of the way the phone is held. At least when I hold it its usually being pressed.
To get back on topic, how is the surface of the power button when sanded?
Sent from my Xperia Play using xda app-developers app
What do you mean sanded down? I dont understand English much. Will the sleep button work when i mod it?
Sent from my R800i using xda app-developers app
MilkyJoePD said:
I think the R button loses its springiness because of the way the phone is held. At least when I hold it its usually being pressed.
To get back on topic, how is the surface of the power button when sanded?
Sent from my Xperia Play using xda app-developers app
Click to expand...
Click to collapse
Not to go off topic again but I had to replace the back cover underneath the battery. As the triggers started to get sticky and not move as they looked liked they were pressed all the way down. So bought a new backing and bang... works like like new. Now.... back to our regular scheduled topic on hand.
I did this last night... so much nicer to finally see the danger led as the whole button rather then what looks like a pin needle
Sent from my R800x using xda premium
leetxperia said:
What do you mean sanded down? I dont understand English much. Will the sleep button work when i mod it?
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Use something like this
You can find this on nail cutter or swiss army multipurpose knife. Gently scrub it on your power button. You can use sand paper also which you can find it on any hardware store, but I don't prefer sand paper because the sand will come off and run into your device
360porcento said:
I have my play for a year now and it is in pretty bad state.... the construction quality is not the best...
and what more I care about is the power button because it is pretty much gone, I'm using apps to lock the screen and the home button to unlock...
found out that some one used a nail file to fix it, so I tried and it was better for the first 3 presses.... I noticed that the light was passing though the part I sanded down, so I did the same on the whole button.
I think It looks pretty cool and all the button lights up and catches more attention..
when its off, it is ice/transparent with the power icon in the middle...
Sent from my R800i on 4.1.1
Click to expand...
Click to collapse
Is that a crack in your back plate by the power button? (White line in first pic)
Just wondering as I have a crack on mine in the exact same place
Sent from my R800i using xda premium
Growling Clover said:
Is that a crack in your back plate by the power button? (White line in first pic)
Just wondering as I have a crack on mine in the exact same place
Sent from my R800i using xda premium
Click to expand...
Click to collapse
I had the same crack as well
Sent from R800x
Lol that does look cool!
Sent from my R800i using xda app-developers app
Growling Clover said:
Is that a crack in your back plate by the power button? (White line in first pic)
Just wondering as I have a crack on mine in the exact same place
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Lol... I haven't noticed it before 0.o yep, its a little crack.... I got I big one on the aperture where you put the your nail to take the back cover... do you have that one too?
Sent from my R800i on 4.1.1

Home button making a cracking sound

I am afraid the home button on my SGS4 is somehow defective. It still functions properly, but it is making all kind of cracking sounds. It almost feels loose. I checked on a SGS3 and a Note 2 and none of the home buttons were exhibiting the same behaviour.
So my question to you guys is, does your home button feel solid or is there and cracking with light touch?
Please take a look at the video I made.
MaTiCeK- said:
I am afraid the home button on my SGS4 is somehow defective. It still functions properly, but it is making all kind of cracking sounds. It almost feels loose. I checked on a SGS3 and a Note 2 and none of the home buttons were exhibiting the same behaviour.
So my question to you guys is, does your home button feel solid or is there and cracking with light touch?
Please take a look at the video I made.
Click to expand...
Click to collapse
On mine, i can hear and feel a slight crackling noise with light touch without pressing the key all the way down. The button feels solid, tight and works just fine AFTER the initial press, but it bothers me that it does that. The shop people wouldn't consider this as a defect since it's so minor, but minor enough to annoy a fussy tech person like me.
Does anyone else have this problem?
Nice and solid on mine. No noises what so ever.
Sent from my GT-I9500 using Tapatalk 2
My I9505 is perfect but my I9500 has the same problem as yours.
Sent from my GT-I9505 using xda premium
Has it gotten worse or better since then? I wonder if it will go away after a few months of button mashing?
Just wondering (it might be stupid from my side, still...) did you remove plastic protective foil from the button. Usually it gets stucked on the button and it is hard to spot...
I switched my I9500 for a new one and the home button is now perfect with no cracking noises.
Sent from my GT-I9500 using xda premium
otacon888 said:
I switched my I9500 for a new one and the home button is now perfect with no cracking noises.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
I have sold my sgs4. I might however buy a black one once the Google Experience ships.
MaTiCeK- said:
I am afraid the home button on my SGS4 is somehow defective. It still functions properly, but it is making all kind of cracking sounds. It almost feels loose. I checked on a SGS3 and a Note 2 and none of the home buttons were exhibiting the same behaviour.
So my question to you guys is, does your home button feel solid or is there and cracking with light touch?
Please take a look at the video I made.
Click to expand...
Click to collapse
Same on my I9500. Annoying as S%#. Had it for a week and has not gotten better or worse
Dark5tar said:
On mine, i can hear and feel a slight crackling noise with light touch without pressing the key all the way down. The button feels solid, tight and works just fine AFTER the initial press, but it bothers me that it does that. The shop people wouldn't consider this as a defect since it's so minor, but minor enough to annoy a fussy tech person like me.
Does anyone else have this problem?
Click to expand...
Click to collapse
Yeah, I got this problem as well! Mine is not loose just like yours, but if you press softly on the button you can feel it move before the key activates.
Then, when you put the phone away, the problem returns after 10 mins of not being used. As if the plastic material "expands" and gets jammed. It really annoys me, because the phone was very expensive for me 800USD here in Denmark! And i expect a perfect phone for that kind of money!
Have anybody got a solution to this?
I am not willing to return the phone because they are only going to send it to get repaired, and I can feel it in my gut that I will get a phone back with more errors than before lol.
And how have it developed since? Gotten worse or better?
Seballe said:
Yeah, I got this problem as well! Mine is not loose just like yours, but if you press softly on the button you can feel it move before the key activates.
Then, when you put the phone away, the problem returns after 10 mins of not being used. As if the plastic material "expands" and gets jammed. It really annoys me, because the phone was very expensive for me 800USD here in Denmark! And i expect a perfect phone for that kind of money!
Have anybody got a solution to this?
I am not willing to return the phone because they are only going to send it to get repaired, and I can feel it in my gut that I will get a phone back with more errors than before lol.
And how have it developed since? Gotten worse or better?
Click to expand...
Click to collapse
Too early to tell. It's really irritating though. I resulted in downloading a software home button to use instead (to prevent it from getting any more worse). Swipe Pad and Pie Control are both good at simulating the hardware home button - no root is required either.
i just noticed a slight cracking noise on my home button as well. It is more apparent if you press towards the edges of the button, and kind of seems like a 2-stage click. annoying
Dark5tar said:
Too early to tell. It's really irritating though. I resulted in downloading a software home button to use instead (to prevent it from getting any more worse). Swipe Pad and Pie Control are both good at simulating the hardware home button - no root is required either.
Click to expand...
Click to collapse
Thanks for the information! I like Pie Control best of the two!
Although, the problem wont solve itself by avoiding the button, so i think i will press it even more, just to see if the problem persists, gets worse or fixes itself. In my experience the button has gotten worse over the past few days. The shop wont take the phone back because they label it as "self fault" (dont know the english term), they think I am the problem and have not taken care of my phone. This is ridiculous! I have now sent at mail to Samsung Denmark to see if they can help me!
RTbar said:
i just noticed a slight cracking noise on my home button as well. It is more apparent if you press towards the edges of the button, and kind of seems like a 2-stage click. annoying
Click to expand...
Click to collapse
This describes my experience as well!
I have tried using a small tool to "push" the button around in its socket, but to no avail, it's still the same problem. This is really getting on my nerve!!
Seballe said:
Thanks for the information! I like Pie Control best of the two!
Although, the problem wont solve itself by avoiding the button, so i think i will press it even more, just to see if the problem persists, gets worse or fixes itself. In my experience the button has gotten worse over the past few days. The shop wont take the phone back because they label it as "self fault" (dont know the english term), they think I am the problem and have not taken care of my phone. This is ridiculous! I have now sent at mail to Samsung Denmark to see if they can help me!
This describes my experience as well!
I have tried using a small tool to "push" the button around in its socket, but to no avail, it's still the same problem. This is really getting on my nerve!!
Click to expand...
Click to collapse
Let me know how you get on with the button and Samsung support. Really interested to know what the outcome is.
Dark5tar said:
Let me know how you get on with the button and Samsung support. Really interested to know what the outcome is.
Click to expand...
Click to collapse
I've got something very similar with mine. It feels slightly loose and not the solid feel it had when I first got the phone. I'm interested in how you get on too.
Mine moves slightly which is expected, but no cracking sounds and feels solid
Sent from my GT-I9505 using xda premium
My home button does the same thing. Although I think it started after I tripped and dropped it at the top of a staircase and it bounced off every stair all the way down *facepalm*
+1
Power button is wonky too.
I'm really unimpressed by the overall build quality of this phone - especially for its price.
Oh well. "First World Problems"
My home button feels absolutely fine, on the other hand, my power button feels sticky and spongey when I press it, still works fine though.
Nothing like my Galaxy Note 2 which clicks when pressed.
Mine started "clicking" few days ago. It drives me mental when trying to navigate through at night.

Sunk in home button, normal?

Picked up my 32 GS4 yesterday and now I am noticing that the home button is sunk in. It's completely flush with the screen. Doesn't stick out at all. It works completely fine, but makes a really audible clicking noise. Obviously Samsung doesn't manufacture these all the same. I am worried if it will get worse in time. A google search brought many results with the GS3's home button. Apparently some think its normal, some don't. I am really fussy when it comes to QC on flagship phones.
Just wondering if anyone else has a sunk in home button?
its normal.
I don't have one yet, but I just wanted to say that I really wish they would have used a capacitive button instead. I work construction, and dust/sand etc. destroys the physical buttons. Also will miss the search button that I have on gs2 I like pressing and holding it for voice search
Sent from my SGH-i777 using Tapatalk 2
Yup. Flush. You're good.
Sent from my SGH-I337M using xda app-developers app
It's not normal. My s4 didn't have that and one of them did. It should be slightly raised.
Sent from my HTC One using xda app-developers app
jetlitheone said:
It's not normal. My s4 didn't have that and one of them did. It should be slightly raised.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Yeah. I have noticed a couple Note 2's home buttons being flat, while others were slightly raised. I don't know if its considered not normal, as it functions just fine.
I do not like the loud audible click the button makes. I might try to swap it towards the end of my 14 days.
EDIT: Ok, looking at it really closely, its not completely flat. Maybe a tad lower than the other phones. I don't know, I would hate to return a phone because I'm too OCD.
Mine is slightly raised. Does it function properly? Have good tactile feedback? If so, I would say it's all good.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
americasteam said:
Mine is slightly raised. Does it function properly? Have good tactile feedback? If so, I would say it's all good.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
The home button functions perfectly fine. Since it doesn't stick out, the tactile feedback isn't that great. May take it to AT&T this week. Haven't decided. I am actually more concerned about my power button. Seems very hard to push and mushy, like its not sticking out as much as it should.
My home button is just BARELY above the rest of the phone, but it feels very responsive and a bit 'clicky'. While it's not raised so much, it at least feels really solid.
However my unlock button seems like it's really sunken in and almost hard to press at times, does anyone else have one like that as well?
americasteam said:
Mine is slightly raised. Does it function properly? Have good tactile feedback? If so, I would say it's all good.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
MentalToast said:
My home button is just BARELY above the rest of the phone, but it feels very responsive and a bit 'clicky'. While it's not raised so much, it at least feels really solid.
However my unlock button seems like it's really sunken in and almost hard to press at times, does anyone else have one like that as well?
Click to expand...
Click to collapse
Same exact issue here with the power button. The home button I can live it, but the power button should be clicky and not feel so mushed.
MattMJB0188 said:
Same exact issue here with the power button. The home button I can live it, but the power button should be clicky and not feel so mushed.
Click to expand...
Click to collapse
Thank god, at least I'm not the only one. This is my second s4, I just brought back my first one from HUGE battery issues. Would lose 15-20% while idle while I was asleep.
Already noticed a huge difference with my new one, except now I've noticed the mushed in unlock button. It's functional, it just feels like it has the possibility of eventually getting stuck somehow...Maybe I'm just being overly attentive and sensitive with the new one.
MentalToast said:
Thank god, at least I'm not the only one. This is my second s4, I just brought back my first one from HUGE battery issues. Would lose 15-20% while idle while I was asleep.
Already noticed a huge difference with my new one, except now I've noticed the mushed in unlock button. It's functional, it just feels like it has the possibility of eventually getting stuck somehow...Maybe I'm just being overly attentive and sensitive with the new one.
Click to expand...
Click to collapse
Then exchange it. When they bring your new phone out thoroughly examine it first.
I'm very tempted, but at the same time , I don't wanna be THAT GUY who keeps bringing back phones because one very tiny detail is slightly off-putting of their OCD.
MentalToast said:
I'm very tempted, but at the same time , I don't wanna be THAT GUY who keeps bringing back phones because one very tiny detail is slightly off-putting of their OCD.
Click to expand...
Click to collapse
Yeah I know what you mean. And I've been that guy many times. Its just when signing a 2yr contract and paying $200+ dollars, one has to be persistent. They all hate me at my local AT&T store but I pay their paychecks.
delete
wttisme said:
I looked at 3 S4s before I picked one that I was satisfied with before I left the store. Some people don't care, but when paying this much for a phone I feel like it should be perfect.
Click to expand...
Click to collapse
And AT&T kept bringing out S4's and let you have your pick? Must have been nice. My local AT&T store would never do that.
Neither would mine. Best Buy MIGHT, but it's not very nice to make them keep opening boxes of new products. Not sure if they can still sell them as such afterward.
The unlock button does seem more sunken than it should be. Might swing by the ATT store in a day or two just to check out their display...If it's that bad, i'll bring it back to best buy and see if they're willing to do another exchange . I only have 4 days left on my 15 day window unfortunately.
Did you put a screen protector
DAMN! I wish I didint see this thread because my OCD just kicked in...
Mine is raised about 1mm up. On my note II its about 2mm.
It feels normal to me...
With the Invisheild HD its flush with that....
artvandalay22222 said:
I don't have one yet, but I just wanted to say that I really wish they would have used a capacitive button instead. I work construction, and dust/sand etc. destroys the physical buttons. Also will miss the search button that I have on gs2 I like pressing and holding it for voice search
Sent from my SGH-i777 using Tapatalk 2
Click to expand...
Click to collapse
I'm also coming from a gs2, and while the lack of a capacitive home button and search button is a bit weird, if you long press the menu button it pulls up search. I know it isn't exactly what you want, but it's close.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

Categories

Resources