Related
Hi everyone,
At first at all i would like to apologize for my language.
Well...
I have HTC HD2 LEO for East Europe.
I change Rom to Artemis HD2 ROM and it goes well. After few days it realese Artemis HD2 ROM Family Ver 22.0 Gen 2 and I update ROM.
At first boot it load normaly but after soft reset it stuck on HTC logo with information about ROM etc in left down corner. Then i do hard reset and htc load rom but the soft was unstable and when I put off battery it stuck on HTC logo even i do hard reset.
I read a loot about white htc logo and do many trick,
I try to instal official rom for east europe using usb connection, but instalation stop and 9% and triangle apear. Instalation stop at difrent stage for difrent ROM's, sometimes is 24% sometimes 2% but never goes to end.
I try instal by sd card but sytuation is that... 3 color apear, very quick white screen with "Loading..." and back to 3 screen color and nothing more. I try with 2 different cards unnamed 4GB and kingston 8GB.
I try to instal different radio 50 and 51, SSPL, HSPL it's says i mus have 1.42, HSPL2/3 it's stuck at usb connection searching. I forgot, 3 screen color show me i have 1.66.HSPL XE.
Only one operation goes well, to 100%, Task29 provided by doloop, after that HD2 buz and show only white htc logo. But when i try to do more... change radio with task29 it's stock on 24%
I don't know what to do now. Mayby goldcard will be helpfull but i don't shure what is wrong with the sd card and i don't now how to do this goldcard.
Thank You for eny sugestion,
I will try to do enything to wake up my HD2
Ask if You need more information.
Triceq said:
Hi everyone,
At first at all i would like to apologize for my language.
Well...
I have HTC HD2 LEO for East Europe.
I change Rom to Artemis HD2 ROM and it goes well. After few days it realese Artemis HD2 ROM Family Ver 22.0 Gen 2 and I update ROM.
At first boot it load normaly but after soft reset it stuck on HTC logo with information about ROM etc in left down corner. Then i do hard reset and htc load rom but the soft was unstable and when I put off battery it stuck on HTC logo even i do hard reset.
I read a loot about white htc logo and do many trick,
I try to instal official rom for east europe using usb connection, but instalation stop and 9% and triangle apear. Instalation stop at difrent stage for difrent ROM's, sometimes is 24% sometimes 2% but never goes to end.
I try instal by sd card but sytuation is that... 3 color apear, very quick white screen with "Loading..." and back to 3 screen color and nothing more. I try with 2 different cards unnamed 4GB and kingston 8GB.
I try to instal different radio 50 and 51, SSPL, HSPL it's says i mus have 1.42, HSPL2/3 it's stuck at usb connection searching. I forgot, 3 screen color show me i have 1.66.HSPL XE.
Only one operation goes well, to 100%, Task29 provided by doloop, after that HD2 buz and show only white htc logo. But when i try to do more... change radio with task29 it's stock on 24%
I don't know what to do now. Mayby goldcard will be helpfull but i don't shure what is wrong with the sd card and i don't now how to do this goldcard.
Thank You for eny sugestion,
I will try to do enything to wake up my HD2
Ask if You need more information.
Click to expand...
Click to collapse
I know this might be a dumb question but is your sd card formatted to fat32?
nvm try to put on orignal SPL? and than try to flash to stock rom with Sdcard?
i suspect that.....
when it first wouldn't boot artemis 22 you needed to change the radio not the rom but then you flashed official rom by sd card it removed hspl and then failed because wrong region.
boot to boot loader
install hspl3 choose 2.08.hspl
return to boot loader
flash any radio mentioned in artemis thread using usb
return to boot loader
flash artemis
when phone starts to set up force hard reset
allow to boot
let us know how it goes
thank You for request
roloracer
there is no dumb question but dump anserwers . Yes, card's are formated using fat32
Veldmuus
how can I put only SPL? any solution?
samsamuel
"boot to boot loader
install hspl3 choose 2.08.hspl"
I try, and it's strange. When I go in to boot loader plug usb cable to htc the "serial" change to "USB" and it is the end of my work becouse when I run HSPL3 it's stay at "Waiting USB connection..." and no else happend.
Mayby it will be succesfull if I use to do this sc card but.. as You know it isn't work.
When you tried to flash the official stock rom back from the sd card did you make sure the rom image was called “LEOIMG.NBH” and on the root of the sd card.
Triceq said:
boot to boot loader
install hspl3 choose 2.08.hspl"
I try, and it's strange. When I go in to boot loader plug usb cable to htc the "serial" change to "USB" and it is the end of my work becouse when I run HSPL3 it's stay at "Waiting USB connection..." and no else happend.
Mayby it will be succesfull if I use to do this sc card but.. as You know it isn't work.
Click to expand...
Click to collapse
try all different usb ports. try to not use ports in the front of pc case, use one around back of the pc.
also right click hspl and choose "run as administrator"
My hd2 see sd card beacouse when slot is empty "Loading..." don't apear. When I plug card "loading..." is apear but only for one socond mayby faster.
root.. you mean file not in eny folder, just on starage card without any folders, yes?
I called leoimg.nbh every time I put file to sd card
What operating system is on the pc you are tring to flash hspl with?
samsamuel
how do You know i use front usb port?
I plug to other usb ports but effects are the same. What I discover... when the HSPL3 is searchin usb connetion and I pluget off hd2 from usb there apear Critical error from HSPL3 program. It mean probably HSPL3 connect to hd2 but stuck.
I work on Xp profesional SP3
hspl is picky about which port it uses.
Personally i would enter bootloader manually, connect to usb, wait for 'serial' to change to 'usb', and only then run hspl3.
what radio rom is currently on the hd2?
Well.. Every time i try to instal something I go manualy to bootloader. As I say hspl3 stuck at connetion with hd2, i can turn of program run again but nothing happends.
Probably radio was 2.10 or official now i dont remember but I gues 2.10
When you connect the phone to the pc the pc does detect it, right? becuase i had a couple of instances where i've tried to install updated radios, ran the installer and windows hadn't finished detecting the phone and that caused a connection issue and the radio installer to quit but when i ran it immediately after this it worked fine.
So i suggest you get the phone to the bootloader manually then connect it to the pc an then leave it a few minutes before you run the hspl3 installer.
Guys... all of You are brilliant. If I don't ask what the problem is on this forum probably I cry on my htc box. But I don't .
It's working... rom instal and everything goes well.
The thing i change to work: I change home I was in my second home and now I'm In my family home special to test instal HSPL3. I have here other USB cable and other computer with XP OS. I read all post and do all again.
First I plug usb cable to front panel... too fast, my bad. It's going wrong.
Then I read about chose different USB connector... too fast becouse when I try i fail, but read last post, plug htc to pc, go make coffe and back. Turn on HSPL3 and it's work, find my hd2 and give me a choose witch spl to instal.
Then I back to samsamuel post and make his instruction. When I end every thing work very well i restar my hd2 and by the now i don't see eny problems.
At finish I would like to thanks
roloracer
Veldmuus
and special for giving best tips
samsamuel
qwerty_7564
M3PH
Thank You very much Guys,
Good news! and now a long deep breath of relief.
No problem dude. The wait is caused by windows XP needing to install and then load a couple of drivers so it can talk to the phone in bootloader mode. If you're not amazingly rich like me (OK i'm not really) and can't afford a cutting edge PC like mine this may take a few minutes to complete.
had this not so great idea last night that I would flash my nand android ROM for my HTC HD2 on Tmobile UK, by formatting the SD card then reinstalling CWD and flashing the ROM...
Unfortunately my fone will not switch on, I can get it into bootloader but do not know what to do from here...
any ideas?
I think I need to reinstall magdlr 1.3, then clockwork mod then my nand android rom, can anyone confirm this is right?
please help
ta
whilst I can get into bootloader and it says USB , my PC will not let me access the SD card, nothing happens at all like when the Open folder pop up appears, well it doesnt....
what have I done??
Is the HSPL 3 already installed on the phone?
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
You need to take your sd card out of your phone and use a card reader. There is a problem with Magdlr usb so that would be the only way to copy things to and from the sd card.
I would do a task29, reinstall magldr, clockwork and then go into clockwork and install.
Hope this helps.
bodyman
I have HPSL 2.08 do I need HPSL 3.0??
Sure I have a card reader
But its erm, well formatted now to FAT32...
Whats task29??
How can I reinstall MAGDLR when the phone will only go into bootloader but my PC will not open the sd folder?
thanks
xirokx said:
I have HPSL 2.08 do I need HPSL 3.0??
Sure I have a card reader
But its erm, well formatted now to FAT32...
Whats task29??
How can I reinstall MAGDLR when the phone will only go into bootloader but my PC will not open the sd folder?
thanks
Click to expand...
Click to collapse
quick seaches found this:
Task29
and you need to be in the bootloader to install magldr -- you use RUU to install that. Then once into madldr, then you can install clockwork -- that uses DAF.
Also, you should upgrade to 3.0.
Hope this helps
Please go read some n00b guides, everything you asked about here is VERY cleary documented, There is absolutley no need at all for this type of topic.
Not trying to be an arse but its just really annoying seeing the forums flooded with these types of topics daily and its because people dont follow simple logic and look at stickies or guide topics prior to jumping in.
trouble is when I connect my phone via usb to PC in order to update to HARDSPL3 nothing happens...
Its like my phone just will not sync with my pc
Even if I get the phone to bootloader mode, where it first says serial, when I connect the fone it does say USB but nothing else happens...
Where are these guides? why are they so hidden...
I dont know if my fone is bricked...please help
If I where you, I would start from scatch.
Go to bootloader when it says USB flash stock WM6.5
Flash HSPL 2.08
Flash MAGLDR
and so and so...
Same problem here with my boys phone. Only thing is, I can't flash anything and wmdc won't recognize the hd2. I feel like an ars lol. Just go buy an android phone and leave winmo in the dust ;-P You might enjoy unloading on it with an ar15 though muahaha
Sent from my HTC Glacier using XDA App
Try using different UBS port or UBS cord and make sure when in bootload your pc show a driver connecting with it or it won't work. And if your on window Vista or 7 try right clicking and run as admin
Also do not have your SD card in while doing this
Sent from my HTC Desire using XDA App
heres an update:
I installed HARDSPL 3.0
The phone then restarted and is working however I now need to install TASK29
But from lets call it my nand ROM main screen one it has loaded, when I connect attach a USB cable the phone will not sync will windows mobile device centre so I unable to perform TASK29
How can I get around this?
Its great the phone is working again however all I am confident after I manage to run TASK29 it will be clean so that I can install another NAND rom on to it...
Just desperately need my pc OS windows 7 to now recognise my phone so TASK 29 will work, but how?
thanks guys for your help
the plot thickens....
I went into booloader and it still shows SPL2.08 when I downloaded and installed HARDSPL3??? This is the filename I downloaded and installed HSPL3_PKG
Also after removing SD card, the phone boots into MAGDLR v1.13 and then keeps looping into reboot...
On a different note, this time when I phone switched on with USB attached but without SD CARD, my pc OS windows 7 installed a driver and it sees it but now I cannot get into the main ROM screen to run TASK29....
Gonna put the SD Card back in and hope it gets me there that way..will report back in 2 mins..
thanks for your help
so i reinstalled magldr 1.13 and clockworkmod but now when I am in magldr and go to boot ad sd I get the following error message:
load zImage
k: zimage
SD KERNAL OPEN FAILED
it cannot find clockwork mod is that right?
where do i go from here?
thanks for your help
all fixed thanks for your input especially connecting to usb ports this one thing helped me resolve everything
there should be a sticky will all info easily accessible what to do when this happens..
thanks
p.s. if anyone can tell me why my bootloader still shows hardspl 2.08 when I upgraded to 3.0 i would be grateful
thanks guys
xirokx said:
all fixed thanks for your input especially connecting to usb ports this one thing helped me resolve everything
there should be a sticky will all info easily accessible what to do when this happens..
thanks
p.s. if anyone can tell me why my bootloader still shows hardspl 2.08 when I upgraded to 3.0 i would be grateful
thanks guys
Click to expand...
Click to collapse
3.0 is just an update to 2.08 that works for the newer hd2's
also, task29 will format your NAND -- it is like the ultimate hard reset. I use it when I switch from different roms. That way there is no residuals left over from any previous roms that may or may not cause problems.
check here for any ?'s that you might have. All stickies have been rolled up into one thread.
Well i noticed that task29 doesn't wipe everyhing. I had issues with various rome for a while, I tried task29 many times with no success, the only thing that solved theme where flashing stock 6.5...
And don't go to spl3 or you won't be able to flash magldr, stay on 2.08
xirokx said:
all fixed thanks for your input especially connecting to usb ports this one thing helped me resolve everything
there should be a sticky will all info easily accessible what to do when this happens..
thanks guys
Click to expand...
Click to collapse
Is this a joke? i mean, the stickies are there, you only need to read them and follow the steps you have tutorials and howtos in task29 thread, then in the hardspl thread and in the hd2 sections (sd,nand).
anyway, i am glad, you worked it out
Hey Guys,
I have NFI what happened to my phone but I think its bitten then dust..
I've been running NAND Android builds for a while now, the phone has been a bit funky for a few weeks now so I wanted to completely wipe and start form scratch..
So I download Task29 a new radio and ROM from the links in the ROM page (http://forum.xda-developers.com/showthread.php?t=933951) and ran Task29 like I have multiple times before.
The install went fine, and the phone rebooted like its meant to but now its stuck on the HTC screen, I can't boot in MAGLDR or HSPL...
So, is it borked??
suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio
samsamuel said:
suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio
Click to expand...
Click to collapse
The radio that was installed on before running TASK29 was, Radio Leo 2.15.50.14.
It already had HSPL v2.08 and MGLDR 1.3, already installed.
As I said, I've flashed new WinMo and Android ROM's hundreds of times, I mean I dont normally run Task29 before every install but I have multiple times in the past.
I only ran Task29 today as the phone was being really bad so I though a clean install might be the best way to go.
hmm, not sure what to suggest without sounding patronising, hehe,
there are a few people that cant seem to get magldr to start, for no good reason,
reflash the radio (just in case) manually go check the spl in bootloader again (just in case it doesnt say 2.08.hspl,, sometimes what you know for a fact is true actually isnt) and as for magldr, well its susceptible to all the usual flashing issues, , run as administrator, try every usb port, turn off your firewall,,,, try another pc even, , in fact if you have another pc available, try that first.
Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???
I've read something about this before. I don't think it's an easy fix and it may be best to try go back to where you bought it and try get a replacement or send it in to HTC. I'm not too sure if they'll know that you have HSPL installed. I'd say highly likely they will. Have you tried hard resetting? Or can you not get to that screen?
If you want to find more on this just google "HD2 Wsod" or "HD2 White screen of death". You'll find lots if people with the same thing.
My HD2 has something similar but I can get to HSPL but it stays at a blank white screen with normal power on.
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?
Skellyyy said:
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?
Click to expand...
Click to collapse
Thanks for the reply, when I plug the USB cable in while the phone is off, only the charge light comes up. Doesn't actually try and boot
QuazzieM said:
Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???
Click to expand...
Click to collapse
I know you said you ha e flashed hundreds of times, so you should know this. I am not being patronizing here either, but I will say it anyway. You have gwo different ways to flash a new radio, but both require gou to put gour HD2 into bootloader.
To put your HD2 into bootloader turn the device off and then turn it back on but hold the volume down button wbile it is booting and it will go to bootloader.
Whilr jn bootloader connect via USB cable to gour computer wait until you see USB the wbite bar of bootloader then you can flash the radio, a Win Mo ROM, HSPL, or MAGLDR just wich ever one uou want to flash at that time.
You can use a 500MB to 4GB SD card to flash the radio as well as a Win Mo ROM. You just rename the.nbh file to leoimg.nbh for the radio or the ROM and copy it to the root of your SD card. plasce the SD card back in the device. Put the device into bootloader but do not let go of the volume down botton until you see search hinge on the screen of the device. Be aware though if you flash a official ROM this way it will overwrite everything HSPL and all so you whind up with a stock HD2 again.
Stupid question: you are holding down the volume down button to boot into HSPL right?
Hello everybody,
I've been searching the forums for a while now but I can't seem to find a solution.
When I try to install a ROM through clockworks it installs successfully but then hangs on the ROM's splashscreen indefinitely. I have been able to trace down this problem to a stuck radio issue. This also makes me unable to install radio.
I have tried to install it by pasting the .nbh file on the SD-card renaming it to LEOIMG.nbh and then trying to install it with the tricollor screen, it fails at 100% just like the customRUU. Installing de original Windows ROM makes it error out at 8 or 9 percent (radio is the first step so it errors out at that I suppose) depending on the SPL version. When installing through RUU it always gives me the 290 Invalid Command Error (290 Ongeldige opdracht) I have tried multiple HSLP versions and am now using 2.08.HSPL.
When the phone boots up it does not display the 3 lines of red text in lower left corner, normally it displays version number there including radio as far as I know.
I really don't now what to do to solve this problem, I've been at it for more than 8 hours now, does anyone know of a solution?
Thanks, MdR15
MdR15 said:
Hello everybody,
I've been searching the forums for a while now but I can't seem to find a solution.
When I try to install a ROM through clockworks it installs successfully but then hangs on the ROM's splashscreen indefinitely. I have been able to trace down this problem to a stuck radio issue. This also makes me unable to install radio.
I have tried to install it by pasting the .nbh file on the SD-card renaming it to LEOIMG.nbh and then trying to install it with the tricollor screen, it fails at 100% just like the customRUU. Installing de original Windows ROM makes it error out at 8 or 9 percent (radio is the first step so it errors out at that I suppose) depending on the SPL version. When installing through RUU it always gives me the 290 Invalid Command Error (290 Ongeldige opdracht) I have tried multiple HSLP versions and am now using 2.08.HSPL.
When the phone boots up it does not display the 3 lines of red text in lower left corner, normally it displays version number there including radio as far as I know.
I really don't now what to do to solve this problem, I've been at it for more than 8 hours now, does anyone know of a solution?
Thanks, MdR15
Click to expand...
Click to collapse
Hi,
Before starting anything,BACKUP YOUR DATA.
Make sure you have correct MAGLDR ROM for your phone.(TMOUS or EU/INTERNATIONAL)Do NOT unzip it.
Download KSUBEDI's TOOLKIT (Don't forget to thank him for his work)
Open HD2 Installer Toolkit:
Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Install HSPL 2.08 HSPL.
Wipe using Toolkit Task 29 (Enter bootloader:as above)
Flash radio...download HERE(Enter bootloader:as above)
Install MAGLDR using Toolkit (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
Repartition according to ROM requirements.(via number 5 usb flasher)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 swap)Remember: ALL data on your SD Card will be erased!(Therefore,back it up)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card
Choose zip from sd card (which you should have placed on the root of your sd card,using a card reader)
After installation,reboot.
Give it time.
Some ROMS take 15-20 minutes to install.
I Already did that, and the point is, the Radio won't install, and as I understand, the rest won't work because of this either.
EDIT: now I have even tried the implausible freezer method (putting the phone in the freezer for a while, this also changes nothing). I really don't know what to do now. I have also found out that it won't let me boot up ROMS installed through the USB flasher in magldr, it then enters an endless loop on the HTC quetly brilliant scene. Help, please.
Doesn't anybody know of a solution? As far as I can tell malybru didn't even read the opening post. The point is: I can't install radio, once I've gotten that installed I will have no problem installing ROM's, I know how that works.
Thanks,
MdR15
MdR15 said:
Doesn't anybody know of a solution? As far as I can tell malybru didn't even read the opening post. The point is: I can't install radio, once I've gotten that installed I will have no problem installing ROM's, I know how that works.
Thanks,
MdR15
Click to expand...
Click to collapse
Hi,
I did read your post,and I thought you were having problems with the order of things.Hence,my post.
Try again to flash an original ROM.
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone
Change the .exe to .zip and
Extract with winrar or 7z the RUU_Leo_HTC_****************************_Ship.zip
find the larger *.nbh file and rename it to leoimg.nbh and place this file on an sd card that is 4gb or less.
The correct ROM will contain the correct radio ,which will help with your problem.
sorry, I have tried multiple clean installs, doing everything from the start. But the radio won't install witch is causing this problem. Installing some ROM's via the Dark Forces method makes it boot a single time, then it enters a loop with HTC quietly brilliant. Doing the clockwork method makes it hang on the HTC logo of the ROM, I have already tried to wait for multiple hours, but nothing happens.
I have seen others with this radio issue, getting the 290 error, but none of the solutions there worked for me.
I have, in fact, installed Android ROM's before, but this is the first time something like this happened.
MdR15 said:
sorry, I have tried multiple clean installs, doing everything from the start. But the radio won't install witch is causing this problem. Installing some ROM's via the Dark Forces method makes it boot a single time, then it enters a loop with HTC quietly brilliant. Doing the clockwork method makes it hang on the HTC logo of the ROM, I have already tried to wait for multiple hours, but nothing happens.
I have seen others with this radio issue, getting the 290 error, but none of the solutions there worked for me.
I have, in fact, installed Android ROM's before, but this is the first time something like this happened.
Click to expand...
Click to collapse
Hi,
Another possibility for reboots is a bent battery pin.
Have you checked these?
I have also read about bent battery pins in other threads, the ones in my hd2 aren't bent.
It is called a radio-brick right? Still some people have been able to solve this.
I appreciate you're helping me though
MdR15 said:
I have also read about bent battery pins in other threads, the ones in my hd2 aren't bent.
It is called a radio-brick right? Still some people have been able to solve this.
I appreciate you're helping me though
Click to expand...
Click to collapse
Sorry,I could not help.
Good luck ,anyway.
MdR15 said:
I have also read about bent battery pins in other threads, the ones in my hd2 aren't bent.
It is called a radio-brick right? Still some people have been able to solve this.
I appreciate you're helping me though
Click to expand...
Click to collapse
Appreciations goes very far if there is a "THANKS" involved and seems hes tried helping you i bet he would "APPRECIATE" it if you hit the thanks button
So, nobody knows of a solution?
Now,, I'm in same situation.
I've been used Nandroid for about 8months but there wasn't that kind of big issue.
I think it is caused by battery pin problem during updating procedure.
I can see one of my battery pin has bad contact with the battery.
So, I fixed it, but once it happened nothing works.
As you mentioned, I looked up every post about "Radio-brick"...
but there is no solution,yet.
I'll keep on finding a solution.
If someone find it, please share it.
Thanks in advance.
Good to see I'm not the only one, I hope you have some luck finding something, it would be a shame if our HD2's would become (as in: stay) useless.
Just to make it clearer: most of the things I've said on this thread are the symptoms of the problem, the cause is the radio not being able to install properly, if this can be solved, the other things will go away too.
Thanks
Solution
I solved it!
I found a ROM that works without RADIO!
Click this link.
Use it with Magldr and Clockworksmod (available in the thread) and install. I was suprised to say it worked flawlessly altough you will probably need to reboot a couple of times before the ROM works perfectly (fault in ROM, not radio related).
Good Luck to everybody, I hope this can help you!
In my case, I can't install Maglder again on my HD2
What I can only do is access to the tri-color screen.
When I pluged USB cable to HD2, the text "Serial" goes to "USB".
But any updates fail. It can't be proceeded on my device.
Don't know why, but I've been stuck until now.
Hello everybody,
I started a thread in the German handy-faq.de forum about flashing my htc hd2 (512LEO) with android.
While they can’t help me, a forum Member told me to ask the xda-Dev.
So here am i and i hope you can help me.
At first, please pardon my mistakes in the English language, it’s a long time ago since I learned it at school
Now my Problem:
My HTC HD2 was repaired by manufacture one year ago. The Smartphone got a new Motherboard with the actual Software (HTC ROM 3.14.407.2(04666) GER, Radio 2.15.50.14…)
The original ROM WM6.5 was/is running without faults.
After reading in many forums about changing the Software I tried to put Android on my HD2.
At first I “opened” the HD2 with HSPL4 and changed the SPL3.03 to HSPL2.08.
After this was successfully done also Task 29 “worked”… I tried to flash clK1.5…the PC said: “done” but after reboot the HD2 stopped with a white screen and green htc letters.
There was no hboot! From booting with pressed “Back” or “Home” Button the same: no menu.
I tried it again several times also with clK 1.4 and magldr (after Task29) the same problem.
Back to WM6.5 via SD Card was no Problem so the HD2 works fine at this time.
What can I do to get Android on my Handy?
Is it possible, that some HD2 didn’t work with clK or magldr?
Is something wrong in "my way" of flashing?
Many thanks
123kb
some older versions of task29 use a radio as the .nbh, so its possible you removed the required radio.
i would.....
forget about task29, its not necessary.
enter bootloader
confirm spl says 2.08.hspl and NOT 2.08.0000
flash 2.15.50 radio
back into bootloader
flash magldr (because it should come up automatically when the phone restarts, without requiring you to press anything, making it easier to tell its worked)
report back.
Thanks for your answer.
I did this yesterday, after installing magldr and auto boot the HD2 shows no Menu, only white screen and htc.
The HD2 shows 2.08 HSPL after booting with L- Button pressed so it shut be "open".
That´s the problem, i can´t get into the Loader Menu.
All the same clK or magldr.
123kb said:
after installing magldr and auto boot the HD2 shows no Menu, only white screen and htc
Click to expand...
Click to collapse
only three reasons that magldr wouldnt show up...
1 - wrong radio - must be 2.xx.50 where xx is 07 or higher (2.15.50 keeps it simple)
2 - wrong hspl - must be 2.08.hspl
3 - faulty hardware.
...are you sure that there are only these 3 reasons?
Radio is 2.15.50.14,HSPL is right 2.08.HSPL and i can´t believe that the Hardware is faulty because Windows Mobile "Backflash" and the Phone is running without any fault.
I will download the Soft again (maybe i loaded "broken" Soft) and try to flash again (without task29 as you wrote)
I´ll be back in some minutes...
...soft download from xda...HSPL 2.08 installed,Radio from orig.ROM 2.15.50.14, with HD2 Toolkit 4.2.0.1 magldr installed...the same as I wrote...no Menu
any idea
Try a different version of MAGLDR/cLK. Your motherboard was replaced, and I have seen so many people with replaced motherboards having problems. It could be like what sam said, a hardware fault. (Technically for HTC, it isn't a hardware fault as long as it doesn't affect the phone's functionality under Windows Mobile)
there have been cases where winmo flashes and works fine, yet other things don't, perhaps magldr starts, but then always hangs at gogogo, or gives 1e fatal hit, , and the dreaded stuck radio has many variants, ranging from being fixable by flashing using the freezer trick, all the way through to nothing at all working ever, , so i could well believe there is a case where winmo would work but nothing else would.
why not try clk again? i believe there is a version of clk that can be flashed from sd card, , might take better than the usb version?
...I tried different Versions of magldr, clK 1.4 and clK1.5 allways the same Problem.
I can´t find clK Version to flash from SD. If you got it, send me a link and I try it.
it seems, that my HD2 only run WM6.5 and before "Murphy" comes and I flash my Phone in a "Paperweight" I stay on using WM6.5.
Thanks for the help.
Have a good time
123kb said:
I can´t find clK Version to flash from SD. If you got it, send me a link and I try it.
Click to expand...
Click to collapse
http://www.mediafire.com/?624yf6cs03buk6f
Copy the .nbh file to a clean SD Card (make sure the SD Card is not too big - a less than 2GB card is sure shot), power up the phone with the vol down key pressed. All the best!
hello ph03n!x,
thanks for the link, I downloaded the file and put the leoimg.nbh to the same 2GB SD Card I used to flash back to WM6.5.
The Phone "said" succesfull done but after reboot, white screen and htc letters.
It will not run on my Phone...ok, back to WM65 again.
Thanks a lot,it was worth a try....I will try it again if there is any way...maybe in the future it is possible )
Hi,
if WinMob6.5 is runing, you can boot Android over WinMob... you only need a right partition on SD-card (see NativSD-thread see: http://forum.xda-developers.com/showthread.php?p=31110691 ) , then install Android in the partition (rom-name must have NativeSD in thread-title like the pacman-rom http://forum.xda-developers.com/showthread.php?p=32721010 ), boot WinMob and start Android via clrcad + haret (or with my "one-click-tool" see: http://forum.xda-developers.com/showthread.php?p=33174747 ) ...
See the Wiki under WinMobile Installation
http://forum.xda-developers.com/wiki/HTC_HD2/NativeSD
(great thanks to Szczepanik for the Wiki)... it looks complicated, but it's realy simple...
My pacman-rom runs great... (thanks XYLO)
Cheers
Klaus
Sent from my HTC HD2 using xda app-developers app
hello o82239,
I try to use your tip, unfortunately without any success,
after starting haret.exe and booting the HD2 shows 6 or 7 lines in very small letters and hang on this screen.
123kb said:
hello o82239,
I try to use your tip, unfortunately without any success,
after starting haret.exe and booting the HD2 shows 6 or 7 lines in very small letters and hang on this screen.
Click to expand...
Click to collapse
Hi,
I think, you should try it all again with a clean SD-card (you can clean all SD-card-partitions under Win7 with "diskpart" or under Linux with fdisk or other tools)... and post all your steps... we can take a look, if you have forgot one step or if you do something wrong...
Cheers
Klaus
Sent from my HTC HD2 using xda app-developers app
just follow the clk install you didn't add driver for your dev.So I think you just follow the step .1.task29 2.flash radio 3.flash clk 4.add driver then reboot with holding on your home button into recovery screen.And can you show us what your screen looks when you in HSPL sreen.
Sent from my HTC HD2 using xda app-developers app
hello and thanks for your answers.
at first for o82239, I tried three different sd cards all are running perfect with WM6.5 (sandisk 32gb class 10, sandisk 8gb class 2,Medion 16gb class 4) formatet with "sdformater", and one partition FAT32 and the second EXT4 with mini tool partition wizard.
for wxl104 the problem is that i can´t get after point 3...clK is successfull installed,shows the pc but the HD2 shows after reboot white screen with green htc logo.
so the main question is:
why did the hd2 hang after rebooting on both "softwaresystems" (sd or nand installation)
i´m shure that i did both installs (many times) the way the "howto" is written or the install guide shows.
123kb said:
hello and thanks for your answers.
at first for o82239, I tried three different sd cards all are running perfect with WM6.5 (sandisk 32gb class 10, sandisk 8gb class 2,Medion 16gb class 4) formatet with "sdformater", and one partition FAT32 and the second EXT4 with mini tool partition wizard.
for wxl104 the problem is that i can´t get after point 3...clK is successfull installed,shows the pc but the HD2 shows after reboot white screen with green htc logo.
so the main question is:
why did the hd2 hang after rebooting on both "softwaresystems" (sd or nand installation)
i´m shure that i did both installs (many times) the way the "howto" is written or the install guide shows.
Click to expand...
Click to collapse
I can't be sure if you have done anything wrong.but just follow the right step,you can't go to CLK or MAGLDR menue.It mean you have done something wrong.you can install w6.5,so the phone driver is ok.But if you use the htc official rom.you can try to re-unclock your phone.And use hspl-2.08 .If also can't you drop your flashing tool,and redown it again.And then follow the right step,which you can serch it though this forum.
wxl104 said:
I can't be sure if you have done anything wrong.but just follow the right step,you can't go to CLK or MAGLDR menue.It mean you have done something wrong.you can install w6.5,so the phone driver is ok.But if you use the htc official rom.you can try to re-unclock your phone.And use hspl-2.08 .If also can't you drop your flashing tool,and redown it again.And then follow the right step,which you can serch it though this forum.
Click to expand...
Click to collapse
1 flash hspl , 2 flash magdlr ,3 boot holding down power button , 4, select usb flash ,5 flash clockwork ,6 flash rom ! that's how i always do it no need to task29