Has anyone tried the Otterbox Commuter case will fit in the laptop dock? I have the Impact and its barely to big and the commuter is usually a little thinner. Has anyone tried it?
no it won't fit..... that is why otterbox create the reflex serie for some units... so you can remove it with out any problem and connect it to a docking station....
Related
Has anyone tried using the Seido holster with a adhesive skin like the Bodyguards or Invisible shield coating? I assume the skin is very thin but then the holster may be very tight and may not allow even the slightest addition in size (0.2 mm per Invisible shield website).
Seido Holster= http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=871
Invisible shield= http://www.invisibleshield.com/smartphone/at&t/tilt.php
Bodyguardz= http://www.bodyguardz.com/BodyGuardz_for_AT_T_Tilt_8925_p/nl-batt-1107.htm
Sediosedio, can you comment on the holster if it will allow the 0.2mm?
Thanks
FYI, it does.
Just to let you know I wanted to do this exact same setup.
The good news is it does fit... the bad news is that you may be unhappy with the invisible shield.
Do a seach for my posts there is one recently describing my experience with the shield. Long story short, it doesn't cover much of the device (hardly nothing on the sides) and it doesn't really give a nice clean look when installed (unless you have access to a cleanroom with 0% dust particles in the air).
It would have been nice if it did work, as protecting the back of the phone from scratches would have been nice (as that area is exposed in the holster). Also the constant moving in and out of the holster MAY rub against the top part of the phone and cause the shield to slowly peel off...on the flip side it may be lessening wear on the phone case itself.
I am sending mine back via money-back guarantee today and have already ordered the Seido rubberized case. Unfortunately their standard holster does NOT work with their case (it is 1mm thick) so I had to order the combo to get the specialized holster too.
So, I have an extra holster for an uncased phone....if anyone wants to buy it...
I have the Invisible shield and the Seidio rubberized case. Both fits together well.
I went with the rather expensive invisible shield since I know their products and simply licked it for the apple stuff which is lying around at home.
Hello to all,
I was wondering if the Seidio Innocase was really any different from those cheapy $6 rubberized plastic cases? I tried one of the cheapy ones on at the mall but it made the phone even bulkier so I decided to skip it, is the innocase really much thinner?
I had the cheap one, and once it failed I decided to stop dicking around - Got the Innocase.
Differences:
-Cheap case is thicker
-Cheap case doesn't hold on as well. After awhile, mine kept sort of falling off
-Innocase has a nice soft felt-lined bottom cover that protects the phone
-The BIGGEST difference... The cheap case touches the screen, and the only way to make it work was to dremel it and modify it so I could actually use the phone
I got the OtterBox Black Defender Case - MOTOROLA ATRIX (TM) 4G with the belt clip and built in screen protector. I kind of liked it at first but it keeps jabbing me in the side and I wish I could just put it in my pocket but it's too think to do so while sitting down.
So I'm looking to get another case that will mostly protect my phone from scratches and a few bumps here and there. So this means I need a screen protector too. It's hard to tell how the screen protector feels and how the case fits on the phone.
What have you used or seen that you like and why?
hiltun said:
I got the OtterBox Black Defender Case - MOTOROLA ATRIX (TM) 4G with the belt clip and built in screen protector. I kind of liked it at first but it keeps jabbing me in the side and I wish I could just put it in my pocket but it's too think to do so while sitting down.
So I'm looking to get another case that will mostly protect my phone from scratches and a few bumps here and there. So this means I need a screen protector too. It's hard to tell how the screen protector feels and how the case fits on the phone.
What have you used or seen that you like and why?
Click to expand...
Click to collapse
I currently use the anti-glare screen protectors that AT&T carries in store. It takes away a little of the brilliance of the screen but I don't mind. I'm also using the Incipio Feather case but for more protection I also did have the Speck Candyshell which fit it really well and did not impede the screen protector. The only reason I returned it was because the "outer-shell" was too smooth for me, I like the rubberized feel of the Incipio.
I have the OtterBox Commuter case on my Atrix. I really like it. It not nearly as bulky as the defender case but still provides seemingly decent protection.
Do these cases keep it from seating on the laptop dock properly?
Seconding the Otterbox Commuter. The naked Atrix felt kinda slippery, the rubber sleeve peeking through the clip on shell makes it feel secure in my hand.
Sent from my MB860 using XDA App
I've been rocking the otterbox impact case with full ghost armor. Works and feels great
squassss said:
Do these cases keep it from seating on the laptop dock properly?
Click to expand...
Click to collapse
Does the Otter Box cases pick up a lot of lint and other stuff in your pockets?
squassss said:
Do these cases keep it from seating on the laptop dock properly?
Click to expand...
Click to collapse
As far as the laptop dock, I'm not sure but with the multimedia dock I have heard that the Speck case can fit if the insert is taken out. If you use the laptop dock quite a bit I would go with the Otterbox Impact case because it would be the easiest to remove and put back on.
hiltun said:
Does the Otter Box cases pick up a lot of lint and other stuff in your pockets?
Click to expand...
Click to collapse
Yes, Otterbox cases are notorious lint magnets. It's a trade off for the protection.
Has anyone heard about "Skinomi TechSkin", "Great Shield", or "splash Masque"?
They are the ones that you can get off of Amazon.com.
I also have the Incipio feather case, works great so far, and is easier for me to hold on to. I work in a warehouse and from handling boxes all the time its hard for me to keep a decent hold on smooth plastic unless I try to crush it.
As far as a screen protector goes, I have not seen a need for one yet. I forgot I had my keys in my pocket when I put the phone in and didn't get any scratches.
diedemus said:
As far as a screen protector goes, I have not seen a need for one yet. I forgot I had my keys in my pocket when I put the phone in and didn't get any scratches.
Click to expand...
Click to collapse
Yea, I feel th same way. I usually take such good care of my phones that I never even get scratches on the screen protector but knowing my luck if I ever tried without one something terrible would happen.
Got the Otterbox Defender for mine. I'll happily have a thicker phone for the added protection.
body glove case
Body glove case seems to be the best fit for the atrix...for me, i.e slim, feels sturdy in hand and removes easily to allow fit with other moto accessories.
Just got the Incipio case and it's great so far. I also have a SGP ultra clear screen protector.
This should be in the accessories forum.
I like to use my phones naked!
Even if they get damage.
In fact, I happen to dislike very much how those protectors make the phone larger in the pocket.
If you know of anything for the Atrix which doesn't make it bigger please let me know.
Gold luck guys.
I also have the Otterbox Commuter case and no screen protector since the display is made out of Gorilla Glass.
Not using a screen protector. Just a bodyglove tpu case. Love it.
Sent from my MB860 using XDA Premium App
Using the skinomi body skin .. it's awesome. applying the back part was a little challenging but i got it down.. I failed on my screen though because I did it in low light.. so I didn't notice i still had some lint on the screen so you can see a little when it's bright.
darkamikaze said:
Using the skinomi body skin .. it's awesome. applying the back part was a little challenging but i got it down.. I failed on my screen though because I did it in low light.. so I didn't notice i still had some lint on the screen so you can see a little when it's bright.
Click to expand...
Click to collapse
How does the Skinomi feel on the touch screen?
As per title, which holster fits the nexus 4 with OEM bumper?
thanks
I remember someone said the Seidio Active Holster for the N4 fits the phone with OEM bumper, but I cannot personally confirm, sorry.
Any of these black and tan leather ones will work.
http://www.ebay.com/itm/Black-Tan-L...314618?pt=PDA_Accessories&hash=item53f4617a7a
I have one and its a perfect fit with the bumper. The case will last you a good 6 months to a year before it starts to fall apart. I picked up mine for like a dollar and a half shipped. Have had several of these exact holsters over the years, and they all last no more than a year. But for the price that is fine.
thanks
forgot to mention that i`m looking more of the clip on like the seidio holsters and not leather.
AW: Holster that works with OEM bumper
Hello,
I'm not shure what type of holster you prefer. I found that one which is perfect for me. I'm using the Ringke Fusion case and not the original bumper. I measured the case and found out that the Samsung Galaxy S4 is in the same dimensions. So I ordered a holster for the S4 which now covers my N4 that is covered by the Ringke perfectly.
I hope this tip does help to find your holster for your bumpered N4.
schm1dt
schm1dt said:
Hello,
I'm not shure what type of holster you prefer. I found that one which is perfect for me. I'm using the Ringke Fusion case and not the original bumper. I measured the case and found out that the Samsung Galaxy S4 is in the same dimensions. So I ordered a holster for the S4 which now covers my N4 that is covered by the Ringke perfectly.
I hope this tip does help to find your holster for your bumpered N4.
schm1dt
Click to expand...
Click to collapse
When did you get the S4 holster? Not a Seidio I assume .
I use the same Ringke Fusion case and use the Seidio Surface spring holster for the N4 and fits perfectly.
Hi kpjimmy,
no, not a Seido. I bought a leather holster, but as you said that's not you're looking for. Therefore my tip to focus on the dimensions of the bumpered phone. As Samsung is blowing out many models and Samsung is very popular, I decided first to look for a Samsung model having similar dimensions.
Usually the holsters are not produced to cover a bumpered phone. So I had to find a workaround and I did. I hope you also can find a solution which is perfect for you.
schm1dt
I use my seidio active holster with my bumper case. Not a perfect fit, the bumper is thinner but a tad wider than the active case. The sides rub the sides of the holster but that proves to help due to it being thinner it keeps it from moving around while in holster. The bottom corners fit perfectly and the clip on top fits over the top perfectly.
Sent from my Nexus 4 using xda app-developers app
Tdeljr said:
I use my seidio active holster with my bumper case. Not a perfect fit, the bumper is thinner but a tad wider than the active case. The sides rub the sides of the holster but that proves to help due to it being thinner it keeps it from moving around while in holster. The bottom corners fit perfectly and the clip on top fits over the top perfectly.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Can you upload or post pics?
Anyone found a belt clip that will work with a naked S9+? I actually use a very thin Spigen case, but the two clips I tried have companion cases which are thicker, making the Spigen case too loose for them. I love the thiness of the Spigen, just looking for a clip.
Thanks
The encased ones work well. They have a model that will work with slimmer cases.
https://www.amazon.com/Encased-Slim...qid=1526924832&sr=8-20&keywords=s9++belt+clip