Database Users

[Q] Someone please help!!!

ok i recently got a european open to all networks samsung galaxy tab,
now i decided to install a custom rom last night with horrible results, my phone is now stuck on the samsung boot screen and will not load properly,
here are the steps i took that ended me up in this mess,
i installed rom manager from android market,
then installed clockwork mod from inside rom manager, following the exact steps i was given but heres where i think i went wrong,
at some point it asked u back up everything onto an sd card, now i thought i had an sd inside it already but i didnt and thats what i think caused all the trouble,
i backed up all my files anyway onto the internal memory b4 goin into recovery mode, after completely wiping the phone as it saids u shud do, i then proceeded to load the modaco rom that i had installed into the "download" section of my memory and thats where it said the exact following words....
Checking /system...
E: failed to mount /system (invalid argument)
/system may be rfs. checking...
checking /date...
checking /database...
checking /cache...
filesystems need to be converted to ext4.
a backup and restore will now take place.
if anything goes wrong, your backup will be named before-ext4-convert-1297008631. try restoring it incase of error.
E:failed to mount /sdcrard (no such file or directory)
now i've tried restoring it and backing it up but all it repeats is the same thing, i know i messed up but now all i want to know is how can i fix it?
please any help would be much appreciated.

KingofXings said:
ok i recently got a european open to all networks samsung galaxy tab,
now i decided to install a custom rom last night with horrible results, my phone is now stuck on the samsung boot screen and will not load properly,
[..]
now i've tried restoring it and backing it up but all it repeats is the same thing, i know i messed up but now all i want to know is how can i fix it?
please any help would be much appreciated.
Click to expand...
Click to collapse
A brandnew start from scratch with Odin and repartioning with the rom from Rotohammer JMIv1.0 or v2.0 wouldt be my advice. You need the pit-file as well. Can be found on his server.

Heppieboeddah said:
A brandnew start from scratch with Odin and repartioning with the rom from Rotohammer JMIv1.0 or v2.0 wouldt be my advice. You need the pit-file as well. Can be found on his server.
Click to expand...
Click to collapse
ok ive downloaded odin v4.03, downloaded the original samsung firmware version P1000XWJJ3.rar from this website and downloaded the european P1_EUR.pit file also but i'll be honest i'm very new to the android world and dont have a clue what to do from here, how do i repartion the rotohammer rom?
i know i'm gonna sound stupid but if u could please explain it step by step i would be very grateful, thank you

Read the following thread that explains how to flash Rotohammer JMI ROM
http://forum.xda-developers.com/showthread.php?t=939360
Give it a good read and then ask if you have any questions before you start the process again.

KingofXings said:
ok ive downloaded odin v4.03, downloaded the original samsung firmware version P1000XWJJ3.rar from this website and downloaded the european P1_EUR.pit file also but i'll be honest i'm very new to the android world and dont have a clue what to do from here, how do i repartion the rotohammer rom?
i know i'm gonna sound stupid but if u could please explain it step by step i would be very grateful, thank you
Click to expand...
Click to collapse
First extract the P1000XWJJ3.rar. You shouldt be left with a single tar-file?! If so
Well if you have the right files. Start Odin. On the left you see the option 'repartion', tick that box. On the left you see pit. Tick that box and load the pit-file. Tick the box PDA and load the tar.file you extracted.
Start the tablet in download modus and attach it to youre pc. You shouldt see on top left a yellow box. Then just press start in Odin
beware that all on yore tablet will be deleted.
here is a very good guide with pictures.
http://leemn.wordpress.com/2011/01/25/galaxy-tab-flashing-a-new-rom-rotohammer-jme/

Heppieboeddah said:
First extract the P1000XWJJ3.rar. You shouldt be left with a single tar-file?! If so
Well if you have the right files. Start Odin. On the left you see the option 'repartion', tick that box. On the left you see pit. Tick that box and load the pit-file. Tick the box PDA and load the tar.file you extracted.
Start the tablet in download modus and attach it to youre pc. You shouldt see on top left a yellow box. Then just press start in Odin
beware that all on yore tablet will be deleted.
here is a very good guide with pictures.
......ok i followed the steps from above which was to install the Roto JMI Pre-Rooted Firmware v2 it got me pass the boot screen and everything on the tab works except it wont let me make phone calls, everything else works but it picks up no network and when i enter into settings it wont even let me access it?? almost like this is a wifi only rom ive installed??
what do i do from here to get it back to a phone?
Click to expand...
Click to collapse

KingofXings; said:
......ok i followed the steps from above which was to install the Roto JMI Pre-Rooted Firmware v2 it got me pass the boot screen and everything on the tab works except it wont let me make phone calls, everything else works but it picks up no network and when i enter into settings it wont even let me access it?? almost like this is a wifi only rom ive installed??
what do i do from here to get it back to a phone?
Click to expand...
Click to collapse
Ok great. at least you got it working again....
Now you need to flash the baseband-modem that you can find in the download link below. Flash it in Odin. Uncheck repartion. Check 'phone' and load the modemfile you downloaded. Its a tar.file. Leave it as it is. Then press start and the baseband will be installed.
Then you have to set-up the APN from youre telecom-provider and you will be up and running.....
http://forum.xda-developers.com/showpost.php?p=11148313&postcount=129

Heppieboeddah said:
Ok great. at least you got it working again....
Now you need to flash the baseband-modem that you can find in the download link below. Flash it in Odin. Uncheck repartion. Check 'phone' and load the modemfile you downloaded. Its a tar.file. Leave it as it is. Then press start and the baseband will be installed.
Then you have to set-up the APN from youre telecom-provider and you will be up and running.....
ok i downloaded the p100-radio-xxjmf.tar file and followed the instructions u gave but it failed and said this message...
<ID:0/004> set up connection.
<ID:0/004> cant open the serial (COM) port.
OSM All threads completed ( succeeded 0/ failed 1)
i dont understand why it would say that, could it be cos the .tar is xxjmf and the Rom by roto uses jmi? u think u could help? thanks again honestly, you've been a life saver.
Click to expand...
Click to collapse

Ok i just changed the usb ports and it works perfectly, the phone is back online and i didnt even have to fiddle with the apn settings, 3G just works fine,
thank you so much for ur help, i couldnt of done any of this without u, if ur ever around in north west london, u got a drink on me lol

KingofXings said:
Ok i just changed the usb ports and it works perfectly, the phone is back online and i didnt even have to fiddle with the apn settings, 3G just works fine,
thank you so much for ur help, i couldnt of done any of this without u, if ur ever around in north west london, u got a drink on me lol
Click to expand...
Click to collapse
Good to read youre up and running again...
Cheers....

Heppieboeddah said:
Good to read youre up and running again...
Cheers....
Click to expand...
Click to collapse
Hey mate, seems I am in a similar predicament here. Just 2 days back I flashed my Tab to Roto JMI v2 from a stock Asian firmware (DDJK3 I suppose) due to a bad Modaco flash that went really bad. Wiped off my data from god knows what areas. Now I am facing an issue that I am not able to understand or solve.
I was using Titanium Backup to remove a system app without Chuck Norris mode, which meant I had to reboot device and it would delete it OS level and say reboot to system. But once I click on reboot system an Exclamation mark just comes across the screen and NOW I CAN'T BOOT INTO my system. neither to i see the options it was earlier showing me upon Pwer + Vol Key up. The only option left for me is to reflash it using Odin.
Any Ideas mate? Reflashing again and again is not the solution right?
Thanks & Cheers!

sahildeswal said:
Hey mate, seems I am in a similar predicament here. Just 2 days back I flashed my Tab to Roto JMI v2 from a stock Asian firmware (DDJK3 I suppose) due to a bad Modaco flash that went really bad. Wiped off my data from god knows what areas. Now I am facing an issue that I am not able to understand or solve.
I was using Titanium Backup to remove a system app without Chuck Norris mode, which meant I had to reboot device and it would delete it OS level and say reboot to system. But once I click on reboot system an Exclamation mark just comes across the screen and NOW I CAN'T BOOT INTO my system. neither to i see the options it was earlier showing me upon Pwer + Vol Key up. The only option left for me is to reflash it using Odin.
Any Ideas mate? Reflashing again and again is not the solution right?
Thanks & Cheers!
Click to expand...
Click to collapse
Well, first of all. Removing system app ad hoc is not really clever to do. But you cant get into the recovery so you are able to clear cache and do a factory-reset? Volume-up+Power on and holding the volume-upbutton untill you get into the recovery?
If not you have to reflash from scratch with Odin. Use the pit/file and check repartion.

sim unlock after OTA 4.4 update?

hello i was wondering if there is a way to unlock the sim on the xt907 after the kitkat update? i used the exploit to sim unlock this phone before so it could be used on straight talk. my brother updated it to kitkat and now the sim is locked again. is there anyway to redo the process or downgrade back down to jellybean so i can use the exploit again? any help would be awesome.

The procedure is the same you used before. It worked for me.

my copy of cdma workshop 2.7 locks up when i enter the spn and click send? does the phone have to be in regular boot, ap fastboot? cause i dont remember and the video dont say

georgia411 said:
my copy of cdma workshop 2.7 locks up when i enter the spn and click send? does the phone have to be in regular boot, ap fastboot? cause i dont remember and the video dont say
Click to expand...
Click to collapse
Should be in BP Tools Mode.
Video: https://www.youtube.com/watch?v=b7-Kbm1_enM
Guide: http://forum.xda-developers.com/showthread.php?t=2487863

carb0nrain said:
Should be in BP Tools Mode.
Video: https://www.youtube.com/watch?v=b7-Kbm1_enM
Guide: http://forum.xda-developers.com/showthread.php?t=2487863
Click to expand...
Click to collapse
i got it in bp mode and when i enter the spc it freezes up but i can connect the phone via port fine just when i send the code i locks up

georgia411 said:
i got it in bp mode and when i enter the spc it freezes up but i can connect the phone via port fine just when i send the code i locks up
Click to expand...
Click to collapse
Are you sending the code "000000" (6 zeros)? I actually just unlocked mine successfully. I didn't use any of the downloads that he gave. I used the demo of CDMA Workshop (currently v3.9.0) and the drivers package from motorola's website. Try using those. It appeared to work for me.

carb0nrain said:
Are you sending the code "000000" (6 zeros)? I actually just unlocked mine successfully. I didn't use any of the downloads that he gave. I used the demo of CDMA Workshop (currently v3.9.0) and the drivers package from motorola's website. Try using those. It appeared to work for me.
Click to expand...
Click to collapse
yes just tried with 3.9.0 and say device does not answer

georgia411 said:
yes just tried with 3.9.0 and say device does not answer
Click to expand...
Click to collapse
Is usb debugging enabled? Also list all the steps used to replicate the problem.

240
carb0nrain said:
Is usb debugging enabled? Also list all the steps used to replicate the problem.
Click to expand...
Click to collapse
i had tried another tutorial on downgrading that involved flashing the boot.img so i downloaded the kitkat files from moto and got that all fixed.
ive got the phone in bptools
i start workshop 3.9.0
it connects to the com port
i click secuirty and enter six 0's and it says device fails to answer

georgia411 said:
i had tried another tutorial on downgrading that involved flashing the boot.img so i downloaded the kitkat files from moto and got that all fixed.
ive got the phone in bptools
i start workshop 3.9.0
it connects to the com port
i click secuirty and enter six 0's and it says device fails to answer
Click to expand...
Click to collapse
Hmmm. That is interesting. The only thing that i can think of is your QC diagnostic driver may be corrupted somehow? Did you follow the video tutorial (https://www.youtube.com/watch?v=mm2NKdXdHnc) to install it? Also can you post a screenshot with your device manager open while your phone is connected in bp tools mode. In you device manager expand the "Other Devices" tab.

carb0nrain said:
Hmmm. That is interesting. The only thing that i can think of is your QC diagnostic driver may be corrupted somehow? Did you follow the video tutorial (https://www.youtube.com/watch?v=mm2NKdXdHnc) to install it? Also can you post a screenshot with your device manager open while your phone is connected in bp tools mode. In you device manager expand the "Other Devices" tab.
Click to expand...
Click to collapse
im gonna try reinstalling the drivers, i forgot how to delete them though do you know the location cause they arent under installed programs

georgia411 said:
im gonna try reinstalling the drivers, i forgot how to delete them though do you know the location cause they arent under installed programs
Click to expand...
Click to collapse
Under installed programs, look for a name that begins with Motorola. Good Luck. If it isn't under installed programs, then I don't think they are installed. If so, go grab the official drivers from here: http://www.mymotocast.com/download/MDM?platform=windows

carb0nrain said:
Under installed programs, look for a name that begins with Motorola. Good Luck. If it isn't under installed programs, then I don't think they are installed. If so, go grab the official drivers from here: http://www.mymotocast.com/download/MDM?platform=windows
Click to expand...
Click to collapse
ok thanks for all the help, i think ive made progress. i switched the cable i was using with my brothers razr m with my blu studio 5.3s cable and loaded up cdma workshop 2.7 and i was able to do all the steps. another issue i found is the other cable wasnt letting me install the qc interface. so now i gotta wait for him to come over and put in his straight talk sim and hopefully we are back in business with it . ill let you know how it goes when hes able to come over
thanks again

georgia411 said:
ok thanks for all the help, i think ive made progress. i switched the cable i was using with my brothers razr m with my blu studio 5.3s cable and loaded up cdma workshop 2.7 and i was able to do all the steps. another issue i found is the other cable wasnt letting me install the qc interface. so now i gotta wait for him to come over and put in his straight talk sim and hopefully we are back in business with it . ill let you know how it goes when hes able to come over
thanks again
Click to expand...
Click to collapse
No problem, glad I was able to help. Have a good rest of your day. Hopefully everything works out.

thanks, much and you have a good one as well.
just to recap for anyone else having this issue here goes what was wrong.
the issue: droid razr m xt907 on straight talk updated to 4.4 and service was lost
first thing make sure all your drivers are installed. in you have the phone plugged in and you dont see QC Interface then uninstall all and reference the links listed above in the other replies (or i may have them listed if i edit)
now make sure your usb cable is working, the one for this phone would not work properly for this so the blu studio 5.3s cable worked great. make sure you have cdma workshop and the spn code is "000000" aka six zeros.
follow all the steps in the tutorial and you should be up and running. this phone does work on straight talk if you follow the tutorial.

carb0nrain said:
No problem, glad I was able to help. Have a good rest of your day. Hopefully everything works out.
Click to expand...
Click to collapse
hey buddy i put the sim card in today and it wont work i done everything by the tutorial and it writes the file. when the phone restarts if i do a network search it shows ATT but it will not connect. any ideas?

georgia411 said:
hey buddy i put the sim card in today and it wont work i done everything by the tutorial and it writes the file. when the phone restarts if i do a network search it shows ATT but it will not connect. any ideas?
Click to expand...
Click to collapse
Yeah, I think the problem is that it knows that its ATT but it doesn't know what to do with the connection. You probably have to set a manual APN setting. Go to Settings-->Wireless&Networks-->More-->Mobile Networks-->Access Point Names-->Add Button(Upper Right Corner)
Use the following values:
NAME: (type anything you like, this doesn't matter. Use "AT&T Phone" or "My Phone", something like that. Just remember that every access point you create should have a different name.)
APN: wap.cingular
Proxy: (not set)
Port: (not set)
Username: [email protected]
Password: CINGULAR1
Server: (not set)
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: (not set)
APN type: (not set)
APN protocol: IPv4
APN: enabled (may need to check this, not sure about your model)
Bearer: unspecified
*DOUBLE CHECK SPELLING*
These values may not work. They were just the first ones i saw. If they don't work, then i will look for a new set of values.
If they dont work, also try the same settings with the username and password blank
When its added make sure you click on it in the access point names list.
Also go back from the access names list and make sure your "Prefferred Network Type" is set to Global.
Hopefully this works for you.

Does GSM mode with APN settings still work in 4.4.2
I have a Verizon RAZR M running on stock 4.1.2 + root + Xposed. I am using a GSM sim on my phone and I'm getting HSPA+ data (so I guess my phone is "unlocked" as I can use another carrier).
My question is does the 4.4.2 ROM support GSM mode and can we add/edit apn in the 4.4.2 rom?

You can edit/add APNs on 4.4.2 and I'm pretty sure you can use GSM on a 4.4.2 ROM.
Sent from my DROID RAZR M using XDA Free mobile app

Razr M Kitkat Straight Talk AT&T sims
I updated to KitKat 4.4.2. and my service stopped. I used Radiocomm to set the NV to 00. I failed at least three times. You have to enable developer options, usb debugging and boot up in Factory mode. Follow the instruction that have been poster on this form = http://forum.xda-developers.com/showthread.php?t=2166542 After I changed the NV I always pressed the restart button. After the phone has rebooted, unplug it and turn it off. Close Radiocomm and open Radiocomm up again. Boot phone back up in Factory mode and connect back usb to Radiocomm. Read the NV again. If it still 00, it has worked. Radiocomm, like people have said, will not see your phone unless usb debugging and Factory mode have not been set. My only complaint is that JB worked prefect and KK has the "Modem Fast Dormancy Monitor Service" screw up. Me and my wifes phone both are effected by this. Our JB battery life was real good. Now we both have reboots 2 or 3 times a day. My battery was dead one morning. I have found no help for this. Good luck with your phone. My Straight Talk AT&T service is really good. Fast Dormancy errors will make me buy some another phone unless Motorola issues a fix. I'm not going to hold my breathe!

[Q] [SOLVED] 900w8 No Service

Hi there
Recently I encountered some issues with my Note 3. google playstore did not allow me to sign in and no notifications appeared on my screen (the phone has root, and TWRP). I decided to try out CM11, downloaded it from the original site along with gapps on my internal sd. i wiped data cache .. the usual and installed the two files except they did not do anything. I download the custom recovery 1.3gb file using odin. booted up and noticed that my service is not working. i called my service provider to see if the problem was on their end but wasnt. i factory reset the phone via settings... same problem. i went into recovery wiped data and cache booted up and same issue.
IMEI= has not been blacklisted
I occasionally do see bars appear however no change in service status
I tried flashing TWRP again and installing CM11 except i get a "failed" message "unable to mount"
I sure hope I did not kill this phone
any idea how do i get service back on my phone? everything else on the phone works besides service provider....
Thank you very much!!

Not sure if this means anything ...

When you had it working with a Touchwiz Rom it could have been your APN settings that were not allowing you to get signal.
If I were you I would start fresh and download the factory image from sammobile and flash it again using Odin. We can start troubleshooting from there.
Did you use this tutorial to get a custom recovery installed? Its really straightforward and I recommend this method over all others.
http://forum.xda-developers.com/showthread.php?t=2792819

RacecarBMW said:
When you had it working with a Touchwiz Rom it could have been your APN settings that were not allowing you to get signal.
If I were you I would start fresh and download the factory image from sammobile and flash it again using Odin. We can start troubleshooting from there.
Did you use this tutorial to get a custom recovery installed? Its really straightforward and I recommend this method over all others.
http://forum.xda-developers.com/showthread.php?t=2792819
Click to expand...
Click to collapse
I followed the steps exactly and I got this error.

MacProo said:
I followed the steps exactly and I got this error.
Click to expand...
Click to collapse
1. Check for Reactivation Lock
2. Check that you are NOT downgrading your bootloader.
EDIT: You are downgrading your bootloader, or else you wouldn't get the aboot fused 2 > binary 2 error.
You will have to flash stock, go to http://www.sammobile.com/firmwares/3/?download=26660
Flash that in AP of Odin. Then you will be reverted back to stock.

nicholaschum said:
1. Check for Reactivation Lock
2. Check that you are NOT downgrading your bootloader.
EDIT: You are downgrading your bootloader, or else you wouldn't get the aboot fused 2 > binary 2 error.
You will have to flash stock, go to http://www.sammobile.com/firmwares/3/?download=26660
Flash that in AP of Odin. Then you will be reverted back to stock.
Click to expand...
Click to collapse
I downloaded that file, used ODIN V3.09 selected the file under AP. the flash worked. bootloader version NB7 however I still do not get any service
i know the issue is not SIM card related. I swapped it to another phone and received service

MacProo said:
I downloaded that file, used ODIN V3.09 selected the file under AP. the flash worked. bootloader version NB7 however I still do not get any service
i know the issue is not SIM card related. I swapped it to another phone and received service
Click to expand...
Click to collapse
You might have to set up your APN settings after you have done that. You can google the APN settings for your carrier and then put them in manually by going Settings > Connections > More Networks > Mobile Networks > Access Point Names
You'll be able to add them in there.

MacProo said:
I downloaded that file, used ODIN V3.09 selected the file under AP. the flash worked. bootloader version NB7 however I still do not get any service
i know the issue is not SIM card related. I swapped it to another phone and received service
Click to expand...
Click to collapse
Is your IMEI (*#06#) a real IMEI that matches with the values at the back of your phone, and not just null/null?

nicholaschum said:
Is your IMEI (*#06#) a real IMEI that matches with the values at the back of your phone, and not just null/null?
Click to expand...
Click to collapse
*#06# gives me a matching IMEI with the back of the phone

MacProo said:
*#06# gives me a matching IMEI with the back of the phone
Click to expand...
Click to collapse
Put your SIM in your phone, download Advanced Signal Status from the Play Store, and show us some screenshots.
In this menu you get to see more information about what is going on with your network.
Have you also made sure your APN settings are set correctly?

RacecarBMW said:
You might have to set up your APN settings after you have done that. You can google the APN settings for your carrier and then put them in manually by going Settings > Connections > More Networks > Mobile Networks > Access Point Names
You'll be able to add them in there.
Click to expand...
Click to collapse
nicholaschum said:
Put your SIM in your phone, download Advanced Signal Status from the Play Store, and show us some screenshots.
In this menu you get to see more information about what is going on with your network.
Have you also made sure your APN settings are set correctly?
Click to expand...
Click to collapse
I compared APN setting between my two devices (both are the same carrier and same model of phone ((borrowing from someone)). APN settings were the same except APN Protocol and APN roaming protocol were dark and could not be changed. even though i couldn't change it it was still listed as ipv4 same as the working phone.
If you need any other information, please let me know

MacProo said:
I compared APN setting between my two devices (both are the same carrier and same model of phone ((borrowing from someone)). APN settings were the same except APN Protocol and APN roaming protocol were dark and could not be changed. even though i couldn't change it it was still listed as ipv4 same as the working phone.
If you need any other information, please let me know
Click to expand...
Click to collapse
Any other suggestions? the phone is still dead

You could try resetting the nvram. Check my thread here: http://forum.xda-developers.com/showthread.php?t=2754957
My thread is for the 900t, but it should be the same for your model.
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T

toastido said:
You could try resetting the nvram. Check my thread here: http://forum.xda-developers.com/showthread.php?t=2754957
My thread is for the 900t, but it should be the same for your model.
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T
Click to expand...
Click to collapse
I gave that a try, rebooted the phone, attempted a call and "Not registered on network"
would changing the ROM have any impact on the service for whatever reason? i gave CM11 a try but wouldn't instal.

Seeing all that you've tried, the one thing i don't see tried is the sim card. Have you tried your sim in another phone, or another known good sim in yours? The fact it gets signal but doesn't register with the network makes me think the sim had somehow gotten corrupted.
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T

toastido said:
Seeing all that you've tried, the one thing i don't see tried is the sim card. Have you tried your sim in another phone, or another known good sim in yours? The fact it gets signal but doesn't register with the network makes me think the sim had somehow gotten corrupted.
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T
Click to expand...
Click to collapse
That'd be a bit weird, but yeah you should ask your friend's phone to try your SIM card.

nicholaschum said:
That'd be a bit weird, but yeah you should ask your friend's phone to try your SIM card.
Click to expand...
Click to collapse
As of right now I am borrowing a friends phone (also a 900w8) with my SIM card and everything seems to be working
If anyone has ANY suggestions I'm willing to give that a try.
I appreciate everyones suggestions and help!

toastido said:
Seeing all that you've tried, the one thing i don't see tried is the sim card. Have you tried your sim in another phone, or another known good sim in yours? The fact it gets signal but doesn't register with the network makes me think the sim had somehow gotten corrupted.
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T
Click to expand...
Click to collapse
The SIM does work on another phone.

MacProo said:
The SIM does work on another phone.
Click to expand...
Click to collapse
I'm not sure then. hopefully someone can come in from here.... sorry man, best of luck!
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T

toastido said:
I'm not sure then. hopefully someone can come in from here.... sorry man, best of luck!
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF1) SM-N900T
Click to expand...
Click to collapse
Thank you!
nicholaschum said:
1. Check for Reactivation Lock
2. Check that you are NOT downgrading your bootloader.
EDIT: You are downgrading your bootloader, or else you wouldn't get the aboot fused 2 > binary 2 error.
You will have to flash stock, go to http://www.sammobile.com/firmwares/3/?download=26660
Flash that in AP of Odin. Then you will be reverted back to stock.
Click to expand...
Click to collapse
Would trying your method (http://forum.xda-developers.com/showthread.php?t=2792819) but changing the bootloader to NB7 work?
"If your bootloader is of version NA2 (somehow) or NB7, skip to the contents of Step 4," rather than proceeding to step 4 going to step 1?

Trying to unbrick HTC Desire 310.

Greetings, the story that follows is embarrasing for me since i ****ed it up 2 times already.
I accidentally deleted my /system/fonts folder and now it won't boot up anymore, then I tried to get into my recovery mode (3e) and i tried to "update from sdcard" and restore a stock ROM, the manager sees the update.zip file but once i try to install it, it gives me this output:
Code:
-- Install /sdcard ..
Installation aborted(APPLY_EXT).
. It gives me that for any ROM, either cusom or stock.
Not sure what is causing, am I using a wrong sdcard format (FAT32)?
Also, this is the first time when I change my ROM, or better said in this case unbrick it, I'm not even sure if changing the ROM restores the fonts folder, but I think worths a try?
Moreover USB debugging is off and I can't use ADB.
Thank you for reading my post and sorry for my awful grammar.

That is how I fixed my bricked HTC DESIRE 310
You need those files
This version of Sp_flashtools http://mediafire.com/file/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar (on others you will have DA_DOWNLOAD_FAIL)
This firmware Working FLAWLESS on my single SIM DESIRE 310
https://yadi.sk/d/2S6hrwSDcbM3t
iNSTRUCTIONS:
Turn off Phone
Click DOWNLOAD
Connect your Phone into your computer
And wait
After few minutes you`ll have completely fresh firmware

link not working
blscorpionbg said:
That is how I fixed my bricked HTC DESIRE 310
You need those files
This version of Sp_flashtools http://mediafire.com/file/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar (on others you will have DA_DOWNLOAD_FAIL)
This firmware Working FLAWLESS on my single SIM DESIRE 310
https://yadi.sk/d/2S6hrwSDcbM3t
iNSTRUCTIONS:
Turn off Phone
Click DOWNLOAD
Connect your Phone into your computer
And wait
After few minutes you`ll have completely fresh firmware
Click to expand...
Click to collapse
Hi! I got bricked desire 310 too xD
but the link you gave isn't working. Can you send me this firmware please!

Error in MiFlash while flashing stock GLOBAL MIUI ROM in Poco M3, come in guys

Good Afternoon XDA Family
Can i ask a question regarding Mi flashtool error, while im performing flashing in my devices
I got this error code:
error:Not catch checkpoint (\$fastboot -s . *lock), flash is not done
What is this, how can i fix it ?..
However even i got this error, my phone just boot up fine with no problems at all.. but I can't get rid of this problem in my mind..
some one can explain it to me of what's is going on..

go to configuration. delete Check point: (leave it blank)

vinzikidz said:
go to configuration. delete Check point: (leave it blank)
Click to expand...
Click to collapse
So it's okay just to ignored it then ?