Database Users

Can't reset after update.zip

Ok so i was trying to root my dream but i failed really bad.
Before i applied the update.zip in fastboot i could get into fastboot and reset my phone, but now i cant. i was following the "root rogers htc dream guide" and could not continue as i needed to get into fastboot to load the boot.img file.
Can anyne help me out with this?

So if you hold camera+power you can get in to the SPL or fastboot? If you can't, you've bricked.

OH really dam.. ok well then i think i might have bricked my phone.
Is there any chance of getting out of brick or am i screwed?

There is currently no way to recover a brick. You could take it back to Rogers, just play dumb and say that it won't turn on anymore, do not use any words that imply you're tach savvy
Just to make sure, try booting holding power+home too and try taking the battery out a few times, but chances are you've bricked :-/

yeah no i have tried every thing i think i might be bricked.
Ill take it back to rogers, haha funny thing i have an omnia i910 and there are no roms for bell to flashed it with a telus rom, i took it back they look at the phone then looked at me and gave me a new one.
Will try it with this one.

The same thing happened to me yesterday. There must be something wrong in the guide. It should be taken down before this happens to others.

Actually, many guides are not incorrect, its just that many new phones have the DVT board and many older guides does not address that issue -> read about it here. I am not saying that rogers guide doesn't(because I didnt use that guide) but thats normally the case.

See http://forum.xda-developers.com/showpost.php?p=4402225&postcount=292

I think I bricked my nexus (my fault) please help!

Hello all,
I think I may have bricked my nexus one. It is completely my fault for attempting things that I knew little about, so flame away But after the flaming, if anyone is willing to help I would be sooooo thankfull...
I successfully rooted my phone following the instructions on this page: (all links edited with a double asterisk as I don't believe I can post links)
h**p://theunlockr.com/2010/01/02/how-to-root-the-nexus-one/
Then successfully installed cyanogenmod (which is awesome!) following this page:
h**p://theunlockr.com/2010/01/08/how-to-load-a-custom-rom-on-the-nexus-one/
All was well, I even got the modaco desire rom up and running, and was happily switching back and forth using the recovery screen. I had nand backups for specific setups, etc.
Then I decided it would be good to know how to go back to stock, and found this page:
h**p://**w.androidspin.com/2010/05/06/guide-unrooting-your-nexus-one-its-like-it-never-happened-almost/
I followed the instructions to the letter (I think) except for erasing userdata (it said "failed: remote not allowed"). I thought that things would be ok, since I'd recently wiped, so I followed the page till the end.
The phone rebooted, and I got the original nexus boot animation - but it's in an endless loop! What's worse, it that now when I try to go to the bootloader or recovery mode, I get the exclamation triangle with the little android.
Is there any way through a command prompt (or other method) that I can fix this? I tried to re-flash the RA recovery image through the command prompt, but the response was, "waiting for device."
ANYTHING that anyone can suggest to help, I would be so thankful! I've been loving the nexus, and hate to think that I crippled it
Thanks in advance,
Randy

I doubt its bricked.
Noticed you didnt mention that fast boot doesnt work? (power button+trackball) try it.
Once you get to fastboot you can flash any ROM back. (fastboot flash **** commands from a command shell)

Did you ever perform a Nand Backup from Recovery?

It's not bricked, the only way to brick is to interrupt power when flashing a Radio image

Connect phone to PC. Open command prompt.
adb reboot recovery
Wipe, reflash.

So far, nobody has managed to brick a Nexus. There is no way as the fastboot mode can restore the whole phone and can't be messed with. Make sure you have the latest version of the SDK with correct USB drivers and fastboot. Then try and reflash the recovery image.
-------------------------------------
Sent from my Nexus One

nexus5894 said:
So far, nobody has managed to brick a Nexus. There is no way as the fastboot mode can restore the whole phone and can't be messed with. Make sure you have the latest version of the SDK with correct USB drivers and fastboot. Then try and reflash the recovery image.
-------------------------------------
Sent from my Nexus One
Click to expand...
Click to collapse
Actually...
http://forum.xda-developers.com/showpost.php?p=6320068&postcount=404

Paul22000 said:
Actually...
http://forum.xda-developers.com/showpost.php?p=6320068&postcount=404
Click to expand...
Click to collapse
............................

It worked!!!!!
It worked!!
britoso, thank you soooooo much! The only way that I knew to get into bootloader/recovery was via power button/volume down, but power/trackball brought up the bootloader screen, and I clicked on fastboot. I was able to flash the RA recover image through the command terminal via fastboot, then able to get into recovery. I had cyan and modaco sense on the sd, and was able to flash one of them on.
​
I never thought I'd be so happy to see "quietly brilliant"!!! I WILL buy you a beer, a case in fact as soon as money clears my paypal account.
I have learned my lesson, research research research. (I did do some, but not enough to feel comfortable with what I was doing - hence my cry for help!)
Other than the phone and OS itself, the thing I like most about the nexus is the fact that one CAN root, and then customize (sold a Telus moto droid because I could not do that very thing).
I digress... thanks again so much!
And Paul, thanks for your sense ROM; I've had HTC phones from the Touch to the the diamond to the Hero, and missed the UI!

Randy Malkoski said:
It worked!!
britoso, thank you soooooo much! The only way that I knew to get into bootloader/recovery was via power button/volume down, but power/trackball brought up the bootloader screen, and I clicked on fastboot. I was able to flash the RA recover image through the command terminal via fastboot, then able to get into recovery. I had cyan and modaco sense on the sd, and was able to flash one of them on.
​
I never thought I'd be so happy to see "quietly brilliant"!!! I WILL buy you a beer, a case in fact as soon as money clears my paypal account.
I have learned my lesson, research research research. (I did do some, but not enough to feel comfortable with what I was doing - hence my cry for help!)
Other than the phone and OS itself, the thing I like most about the nexus is the fact that one CAN root, and then customize (sold a Telus moto droid because I could not do that very thing).
I digress... thanks again so much!
And Paul, thanks for your sense ROM; I've had HTC phones from the Touch to the the diamond to the Hero, and missed the UI!
Click to expand...
Click to collapse
Glad to hear it. You learn the most by trial and error.

I think i got the same problem. i tried to Unlock Bootloader and Root Google Nexus One which was successful but then i tried to superboot it and when it came to the part where you "double click the ‘install-superboot-windows.bat’ file" i clicked it but it did not go to the nnext screen where the superboot completes it just stayed at the "bootloader screen". i must hve not done something or done something wrong i dont know.
So then i unplugged the phone from the pc and rebooted it. when it reeboted i wasnt getting any network, the phone was slow and the notification bar would not slide down...also i noticed the phone restarting on itself...
/i tried all kinds of "restore to factory settings" but not solved. Can anyone tell me what to do tht will work. I coud not understand what was said in the above thread as i am new to this android n my first time rooting n stuff n i believe that solution would work for me too..if some one could please explain in simple tirms the steps i need to take would be good...
Really appreciate it....

revonomics said:
I think i got the same problem. i tried to Unlock Bootloader and Root Google Nexus One which was successful but then i tried to superboot it and when it came to the part where you "double click the ‘install-superboot-windows.bat’ file" i clicked it but it did not go to the nnext screen where the superboot completes it just stayed at the "bootloader screen". i must hve not done something or done something wrong i dont know.
So then i unplugged the phone from the pc and rebooted it. when it reeboted i wasnt getting any network, the phone was slow and the notification bar would not slide down...also i noticed the phone restarting on itself...
/i tried all kinds of "restore to factory settings" but not solved. Can anyone tell me what to do tht will work. I coud not understand what was said in the above thread as i am new to this android n my first time rooting n stuff n i believe that solution would work for me too..if some one could please explain in simple tirms the steps i need to take would be good...
Really appreciate it....
Click to expand...
Click to collapse
Tell me what i need to download again and how to go about it...i really need my phone working again ((((

Stuck on HTC magic screen (Solved)

Hello. So I've recently decided to root my mytouch 3g with the headphone jack, which probably makes it the 1.2 version, and I'm starting to regret it. I've followed the steps fine on this website (link below) until I got to step 3. I rebooted my mytouch however it is now stuck at the HTC magic screen. It hasn't changed for quite a while. I was wondering if my phone is bricked. Hopefully it's not and if it's at all possible to fix it. (just remove the spaces to get the link.)
h t t p ://t h e u n l o c k r.c o m/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/

If ur still stuck, pull your battery, press red power/hang-up button + home into recovery. wipe and flash again. Keep reading those guides. What rom are you flashing by the way?

I haven't gotten to flashing the rom yet but I was thinking of the latest stable rom for mytouch 3g. Also I'm currently attempting to revert my mytouch back to the original firmware it came with and trying to see if i can root it again later.

Good luck. Not much out there thats stable like any official rom from tmobile, but its fun to learn (time consuming, too) If you dont feel up to it, stick with what it came with. New updates coming soon(ish) anyway.

20_Eyes said:
Good luck. Not much out there thats stable like any official rom from tmobile, but its fun to learn (time consuming, too) If you dont feel up to it, stick with what it came with. New updates coming soon(ish) anyway.
Click to expand...
Click to collapse
Lol soonish. Yeah I couldn't wait so I decided to root my phone. Hopefully I get things working.

you should be fine. Read and follow correctly. I used that same tutorial when I unlocked mine.
http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
This is what I used and I didn't run into any issues. Follow that to the "T" cause if you reboot at a particular part, the part that says "DO NOT REBOOT" and you do, you're jacked.
Hope you get it to work. Enjoy!

Luckily I managed to get it to work after many long hours and failed attempts. It seems that I was doing everything right and I just needed to shut off my phone manually instead of letting it restart when it prompts me to. If I had known this I would have saved myself many long hours of frustration. But thanks guys for the suggestions and help. It's nice to know I can have support when I need it.

How did you mange to pull it off? I have the same phone as you do, and I've been trying for days to get out!! just to use the phone on any rom then i'll try rooting it again!!
Please help me, im begging you!!
Thanks
Please provide the steps you did, if you don't mind specifically!!

Please help a newb flash a Streak

Hello guys,
please dont think i am lazy, i have read most of the topics here but i am now just more confused then before. There are so many solutions, do's and dont's that i have no idea how to do it.
I have managed to root my streak running android 2.2
I would like to flash it with a newer custom rom but i have no clue how to do it. Could please someone tell me step by step. I have downloaded half of the links shown here in the forum but still have no clue.
Also, could someone tell me what rom to pick. I wanted to flash the streakdroid 2 but i have read so many comments about low performance and other problems. Any other rom recommended.
Any help is greatly appreciated and i hope one day to be able to help others.
TIA

Ok first things first you need to flash streakmod or clockworkmod via fastboot. I prefer streakmod as I sometimes get errors with nandroiding on clockwork. Follow the guides for flashing custom recoveries in the threads for them. Once you've got a custom recovery just place the rom of your choice onto the root directory of your SD card (not in a folder). Then boot into recovery by holding volume up + power. At the first screen select option 2. The screen will turn black, press power. Once in the custom recovery select install update. Navigate to the custom rom and select it. Wait a minute for it to complete then select reboot. You're all set. I recommend booting back into recovery and doing a nandroid back up after you get everything set up. As far as roms go, I'd go for dj-steves 1.9.0 its the best IMO. Good luck!
Sent from my HTC Vision using XDA Premium App

Android Development is not for questions or Problems
Moving to General

Use StreakMod Recovery if you want a custom ROM, To flash a stock ROM you use the stock recovery. See this thread for a tool to help you flash the recovery you need. The latest version of StreakMod eliminates the step of hitting the power button and the nandroid backups work.
For stability use the latest Strekdroid Froyo version (1.9.0), SimpleStreak or a stock ROM. Read the development section here for other options.
Here is a page of Streak related links, lots of stuff there you may want to look at.

dosada said:
Hello guys,
please dont think i am lazy, i have read most of the topics here but i am now just more confused then before. There are so many solutions, do's and dont's that i have no idea how to do it.
I have managed to root my streak running android 2.2
I would like to flash it with a newer custom rom but i have no clue how to do it. Could please someone tell me step by step. I have downloaded half of the links shown here in the forum but still have no clue.
Also, could someone tell me what rom to pick. I wanted to flash the streakdroid 2 but i have read so many comments about low performance and other problems. Any other rom recommended.
Any help is greatly appreciated and i hope one day to be able to help others.
TIA
Click to expand...
Click to collapse
I don't have time to go into detailed steps for you right now, but here is what I can recommend:
Download and uncompress MultiRecovery Flasher from here:
http://forum.xda-developers.com/showthread.php?t=1000455
Flash StreakMod Recovery.
Download Simple Streak from here:
http://forum.xda-developers.com/showthread.php?t=1113256
Save this on the root of your sd card. For ease of use you can rename it update.zip
Install the drivers on your computer (assuming windows) for the Dell Streak. You can get them here:
ftp://ftp.dell.com/Handheld/R288920.exe
Reboot into fastboot mode. To do that, with the phone off, hold down the power button and the camera button at the same time. When the white screen comes on, release the buttons and then touch the fastboot "button" when presented on the screen. Now plug the usb cord in and the bottom of the phone should say something along the lines of Fastboot Mode or similar.
Run the MultiRecover Flasher and choose StreakMod Recovery. When this is done (it takes less than 1 minute normally), you need to boot into your new recovery. With the phone shut off, hold the power button and both volume buttons at the same time. When the screen with the 4 choices appears, choose option #2 (should be something about upgrading using update.pkg or similar). StreakMod will load. Browse the options here to see what's available. Go into advanced, then nandroid and make a full nandroid backup. This will take 5 - 10 minutes or so. Then do a data wipe/factory reset. Then the option to apply update.zip from sd card. If you had named your rom to update.zip and put it in the root of the sd card, choose update.zip from sd card again. If not, choose the other option and be presented with a list of files/folders on your sd card. Find your rom's .zip file and apply it. When it's done choose reboot now and enjoy. If you run into problems booting the first time, shut the phone down (it may require a battery pull to do so) and power on using the power button and both volume buttons and choose factory reset at that menu (this is the one you used to get into StreakMod recovery earlier). The device will end up rebooting twice (you really can't tell since it's always the Dell Logo, just takes longer) and you should be good to go.
If you have any questions, post them here and someone will be happy to help you along. I'm not an expert by no means, I've just done this several times as I like trying out the different Roms. The nandroid backup and restore options in Streakmod recovery is a godsend. If I install a rom and have problems, I can revert to what I had (settings, apps, layouts, everything) in just a few minutes with no computer required, all from the phone. Learn to love it.

I get so sick of all these retarded questions and threads.I have never seen anything like this...where EVERYTHING IS ANSWERED,EXPLAINED and still people say "Don't think I am lazy".
I know,if you don't have anything nice to say,don't say it...but this is way too much.

shinydesert said:
I get so sick of all these retarded questions and threads.I have never seen anything like this...where EVERYTHING IS ANSWERED,EXPLAINED and still people say "Don't think I am lazy".
I know,if you don't have anything nice to say,don't say it...but this is way too much.
Click to expand...
Click to collapse
I agree with you to a point, however when I bought my Streak back in February the first thing I did was come to this forum as I remembered it from my AT&T Tilt days. I started reading...alot. I got more and more confused myself. I read stuff like 318, 309, UK versions, US versions, etc. I didn't know what was compatible with what. I read more, and finally attempted something and it worked and I was hooked. But mind you, I'm a computer geek and understand how things work in the computer world. At work, I'm surrounded by people who don't and it amazes me how much hand holding I have to do for basic tasks. So I get it when people say they are confused. My rationale behind giving the OP the instruction that I did is that once he does it one time, he'll get more comfortable, understand the process a little more, and maybe start to understand some of the other stuff. Then who knows, in a couple months he may be motivated to make the next bada$$ rom for our loved devices. It could happen... ;-)
We all have to start somewhere.....and this forum is the place for it to happen, because of its wonderful, selfless members who are willing to lend out a helping hand expecting nothing in return.

Thank you so much guys. Got it all working and flashed the rom i got recommended, works perfectly.
I really havent been lazy. You just have ro understand that the start,is really hard for a beginner. I need to get into some basics, to understand what and why. I have flashed hundreds of wm phones but this is something different. I prefer to ask and be on the save side. How does it help either of us if i brick the device and ask after?
I really appreciate the people which dont get tired explainig something for the tenth time, this are the people which make this as big as it is.
Again, thank you so much for helping. I hope i ll be able to return the favor one day.
Sent from my Dell Streak using XDA App

strick242 said:
I agree with you to a point, however when I bought my Streak back in February the first thing I did was come to this forum as I remembered it from my AT&T Tilt days. I started reading...alot. I got more and more confused myself. I read stuff like 318, 309, UK versions, US versions, etc. I didn't know what was compatible with what. I read more, and finally attempted something and it worked and I was hooked. But mind you, I'm a computer geek and understand how things work in the computer world. At work, I'm surrounded by people who don't and it amazes me how much hand holding I have to do for basic tasks. So I get it when people say they are confused. My rationale behind giving the OP the instruction that I did is that once he does it one time, he'll get more comfortable, understand the process a little more, and maybe start to understand some of the other stuff. Then who knows, in a couple months he may be motivated to make the next bada$$ rom for our loved devices. It could happen... ;-)
We all have to start somewhere.....and this forum is the place for it to happen, because of its wonderful, selfless members who are willing to lend out a helping hand expecting nothing in return.
Click to expand...
Click to collapse
Motivation and Impressive!! +1
Sent from my Dell Streak while away from alienware

Flashing back to complete stock?

Hey guys... So I'm enjoying my DHD, It was on the 3 U.K network, unlocked it, rooted t, running leeedroid atm, however, if I ever need to get it back to a stock rom in case I wanna take it back, how do I go about it?
Remember it was originally on 3 U.K.
Thanks

There's threads all over the dev section, go have a look at them.
I think most people who have sent them back with custom ROMs on there have just been flashed back to stock anyway, so they don't seem to mind that much, but just in case.
As far as I'm aware though it's as simple as downloading a piece of software called a RUU for your phone, which in your case is 3, running it with the phone plugged in and then laughing at how easy it is =)
OR
Putting the img on the root of your SD card, going into bootloader (volume down and power on, then bootloader) and it automatically finding it, installing it and then reboot.
But I'd suggest reading a few of the threads about it and using the search button because as with all these things, there's always a risk it'll brick
After a quick search this thread http://forum.xda-developers.com/showthread.php?t=1267345&highlight=ruu has a link to the ruu you might want, then just ota update it.

Brilliant. Sounds good enough.
Also, how can I change the splash screen of the phone? Hate the "3" Logo coming up when I restart the phone.

JccageX2 said:
Brilliant. Sounds good enough.
Also, how can I change the splash screen of the phone? Hate the "3" Logo coming up when I restart the phone.
Click to expand...
Click to collapse
Good good. Like I said though, most people seem to just send it back and they'll do it for you
I'm not positive you can, I've never seen any thread saying how to get rid of it. You can have a nice boot animation though from uot (google "uot kitchen")

Here is a link on changing the bootsplash. Its fairly easy to make one yourself, or you can ask one to be made for you. Their are quite a few posted you might find one you like
http://forum.xda-developers.com/showthread.php?t=1059520

Help! Really need to go back to stock firmware before tomorrow morning, I'm on 3 U.K and need the right RUU!
When I got it it was already on 2.3.3, What RUU Can I flash? Or how else can i go back to stock, help D: