Related
I have an HTC Hero running Fresh 0.7 with the two-part patch applied. I would like to un-root the phone if at all possible. I have attempted using the RUU utility, but received an error code 170 when I ran it. The error indicates a USB connection issue, but the phone is definitely plugged in and has all drivers installed (I have the SDK and ADB drivers installed).
Can anyone give me a hand restoring my phone? Any help is greatly appreciated.
try booting into fastboot mode (hold vol up and power on) then run the RUU utility. This method has saved me at one point!
saved me too! I got into a pickle when i flashed a cyanogen 6 rom. The rom worked but for some reason my sdcard would not mount, keep getting
E: can't mount /dev/block/mmcblk0
p1 (or /dev/block/mmcblk0)
so then i tried fastboot and made sure usb was connected ( fastboot devices )
and still had problems.... fastboot failed, remote: not allow .. so after a couple of days reading forums i tried running my phone in fastboot usb ( made sure was connected through command on pc ) then ran Hero_C_Sprint_2.27.651.5_R_2.1update.exe utility and Bam! Loaded up back into stock. haven't had any problems and my sdcard works again
Fastboot mode has always worked for me. (Volume UP + Power On)
i have a question, i am taking my phone back to sprint today and if i just flash the RUU will it be fine, or will i have to unroot it??
xxxk15 said:
i have a question, i am taking my phone back to sprint today and if i just flash the RUU will it be fine, or will i have to unroot it??
Click to expand...
Click to collapse
ruu will unroot it.
Whick one should i flash or should i use fastboot and run hboot??
like would this RUU work??
http://forum.xda-developers.com/showthread.php?t=804692
xxxk15 said:
like would this RUU work??
http://forum.xda-developers.com/showthread.php?t=804692
Click to expand...
Click to collapse
Looks good to me. that's what I used.
ok and sorry about all of the questions but i have one more... do i flash it in recovery or do i do something eles with it in like fastboot??
aiwetir said:
Looks good to me. that's what I used.
Click to expand...
Click to collapse
ok and sorry about all of the questions but i have one more... do i flash it in recovery or do i do something eles with it in like fastboot??
xxxk15 said:
ok and sorry about all of the questions but i have one more... do i flash it in recovery or do i do something eles with it in like fastboot??
Click to expand...
Click to collapse
it's right there in the thread you linked to.
1. Simply rename this to HERCIMG.zip and place on the root of your SDCard.
2. Power your phone completely off.
3. Press and Hold VOL DOWN and POWER until your phone boots into HBoot mode.
4. Wait for it to verify the zip, then click <ACTION> (Trackball) to update, or <SEND> (Green Call) to cancel.
Click to expand...
Click to collapse
If your running Windows 7 and get error 170 just exit out of the program, unplug, plug it in and rerun the program. That's what worked for me.
Sent from my HERO200 using XDA Premium App
since i somehow managed to lose the ability to connect via fastboot..
is there another way for me to install zips?
phone rooted with 1 click..
also open to ideas as to why fast boot only says < waiting for device > now?
no conflicts in dev mgr, have uninstalled and reinstalled the sync and driver..
removed from dev mgr..
updated while in fastboot mode etc..
no dice..
318-us
official 2.2 rom
att unlocked.
Black
can i convert a zip to a pkg and rename it update.pkg?
right now all i have is the pkg option when i hold the vol buttons and power.
i recently flashed to the new update which had fixes and newer baseband etc..
that went fine but the the steve 1.5 came out and i want to switch back.
as stated above thats not possible now since fastboot refuses to see my device.
Can someone put it in a pkg format for me maybe?
I dont like this official release...
its slow..it has lame apps, etc..
lil help?
dont really want to formate my laptop to fix a usb driver issue..
especially when the mass storage and sync work just fine..
+1
cant use fastboot after update to 318
rooted by super one click
black
unlock 00
there is a way of flashing custom recovery via terminal emulator. DEVICE NEEDS TO BE ROOT'D
save .img on to SDcard and rename to recovery.img
then open terminal emulator and type
su (press enter)
flash_image recovery /sdcard/recovery.img (press enter)
reboot (press enter)
I had the waiting for device problem. I read a few tips saying to try...
Type "adb devices" to see if its recognised there.
Make sure streak is the only device plugged in usb.
If using a hub try a different slot or direct into pc.
Turn streak off and into fastboot while still connected to pc (after pc loads drivers)
Reboot pc.
I swapped usb soccets and that fixed it for me
Hope one of these tips works for you too.
Thank you. I actually tried all of those things...before i posted.
wondering if maybe the 318 isn't compatible..
it says its in fastboot mode..
everything else works..sync, sd card shows in explorer etc etc..
just no fastboot.
luckily the recovery still allows me to do .pkg but i need zips too
very annoying..
I ordered a M11XR2 and will try with that when it arrives..
tina333 said:
I had the waiting for device problem. I read a few tips saying to try...
Type "adb devices" to see if its recognised there.
Make sure streak is the only device plugged in usb.
If using a hub try a different slot or direct into pc.
Turn streak off and into fastboot while still connected to pc (after pc loads drivers)
Reboot pc.
I swapped usb soccets and that fixed it for me
Hope one of these tips works for you too.
Click to expand...
Click to collapse
I have 318 and fastboot works for me.
I only had to reconnect the adb bootloader interface driver again (just like I had to the very first time).
It is just fine now...
http://forum.pocketables.net/showthread.php?t=8285
I've not had any issues with fastbooting, after installing 318, I've managed to flash clockworkmod aswell as the new Streakmod recoveries with my Windows 7 64bit.
reconnect the adb bootloader???
what do you mean?
you mean you plugged the usb cable in and ran fastboot?
lol
yeah..thats helpful
Radimus said:
I only had to reconnect the adb bootloader interface driver again (just like I had to the very first time).
It is just fine now...
http://forum.pocketables.net/showthread.php?t=8285
Click to expand...
Click to collapse
bigfoots1 said:
reconnect the adb bootloader???
what do you mean?
you mean you plugged the usb cable in and ran fastboot?
lol
yeah..thats helpful
Click to expand...
Click to collapse
NO....
The streak wasn't recognized on the PC in fastboot mode, so I went back to device manager and found the unrecognized android device and set it to use the bootloader driver... The same proceedure as was done the first time the streak was connected to a PC to setup fastboot.
Took almost 30 seconds to fix
as i said though.. i have no conflicts...
I can even remove it from the device mgr...put eh phone in fastboot mode where it is waiting for usb coinnection..plug the phone in.. iot installs the drivers then the phone sees this and shows fast boot...
so you would expect it to work right? wrong... it says waiting for device...
I have tried everything I can think of..
i got a good deal on a new m11xr2 with win 7 so i will have a fresh slate and will see what results i can get.
in the mean time.. how can i convert this steve 1.5.zip to a .pkg?
or even install it with some other sokution or method?
i have it rooted via one click...
i have root explorer...
what now? lol
there has to be a better way..
Radimus said:
NO....
The streak wasn't recognized on the PC in fastboot mode, so I went back to device manager and found the unrecognized android device and set it to use the bootloader driver... The same proceedure as was done the first time the streak was connected to a PC to setup fastboot.
Took almost 30 seconds to fix
Click to expand...
Click to collapse
Its easy to miss bits when its all going wrong so do check the sticky look here first for streak, I had to refer to it a few times. You definitely need clockworkmod or streakmod to flash updates. I believe you can do it via a terminal app with su privileges. There's a thread from a few hrs ago saying. I will find for you if you can't
Can zip be extracted and converted to .pkg?
Hell I would be content with just a way to install the performance tweaks...thats the main issue really...
Sent from my Dell Streak using Tapatalk
bigfoots1 said:
Can zip be extracted and converted to .pkg?
Hell I would be content with just a way to install the performance tweaks...thats the main issue really...
Sent from my Dell Streak using Tapatalk
Click to expand...
Click to collapse
I know Steve mentions "if you haven't flashed official dell update" blah blah... so im guessing you don't loose performance unless you manually downgrade? Have you seen the thread I mentioned? The OP claims he changed the dell .pkg to .zip and successfully flashed via clockwork..
http://forum.xda-developers.com/showthread.php?t=869076
how does that help me?
when i power up holding the vol up and down buttons i only get the install Update.pkg option and when i choose it it takes me to the blue text screen when i choose to either update via pkg or reboot. its the Android system recovery utility GAUSB1A131800
there is no option or way to get an option to install zip.
I would like to be able to install the performance fix for 2.2 zip or steves 1.5zip
so do you understand now?
I cant get fastboot to work to install clockwork.
I only have the recovery utility...
tina333 said:
I know Steve mentions "if you haven't flashed official dell update" blah blah... so im guessing you don't loose performance unless you manually downgrade? Have you seen the thread I mentioned? The OP claims he changed the dell .pkg to .zip and successfully flashed via clockwork..
http://forum.xda-developers.com/showthread.php?t=869076
Click to expand...
Click to collapse
it seems like i remember a thread about converting zip to pkg..
I cant seem to find it though..
if you just rename it in root explorer you get a signing validation error when you try to install it..
so I'm still stuck on stock 2.2
The initial thread is irrelevant, Have you not flashed a clockworkmod or streakmod previously? I would guess its possible to store a recovery.img on sd then flash via terminal app, i cant see why not? You could also probably use adb (if you cant connect to that the theres apps to do it wirelessly)
yes, i have flashed many times...
I flashed to 309 recovery in order to install the latest dell Update.pkg which went just fine. then when i went back to flash clockwork i could no longer connect via fastboot.
and thats where im at now..
cannot get fastboot to flash clockwork so i can install zips..
hence im asking for a way to do it without clockwork/fastboot until i get that sorted..
tina333 said:
The initial thread is irrelevant, Have you not flashed a clockworkmod or streakmod previously? I would guess its possible to store a recovery.img on sd then flash via terminal app, i cant see why not? You could also probably use adb (if you cant connect to that the theres apps to do it wirelessly)
Click to expand...
Click to collapse
an I still believe the issue is that you do not have the correct bootloader driver installed on your PC as described here:
http://forum.xda-developers.com/attachment.php?attachmentid=397078&d=1283901727
The issue is your PC, not the Streak (most likely)
Since January i been waiting to root my phone. Htc wildfire 2.2.1
I already tried with unrevoked, and a lots of other ways and never with sucess annd today i have been sucess
I root my wildfire with alpharev to put S-Off and then with SuperOneClickv1.9.5.
Restart and voila.....
Go to hxxp://alpharev.nl/x/beta/ & download the windows version
2. When it asks you for the serial, enter your phone's serial number. Go to Settings > About phone & enter your serial. Copy the code given into notepad
3. Make sure you turn on USB debugging in Settings > Application > Development
4. Install the HTC Driver. Mine is in the memory card that came with the phone
5. Extract & run alpharevx.exe. Use the code given earlier. Then connect your phone. It should detect & your phone should display USB debugging mode
6. Wait for it to complete. Once it is completed, you can remove your phone.
7. To check turn off your phone. Then press volume down & power. On top it should display alpharevx & s-off
Clockwork recovery
1. This is to enable you to install a custom rom, and also for backup
2. Get the fastboot tool for windows
3. Copy the fastboot file you downloaded to the alpharevx folder. Copy the folder to drive C so it is easier to run command prompt. Rename the folder to wildfire
4. Download the recovery for Wildfire. Extract & rename it to wildfire.img
5. Open command prompt. Type cd c:/wildfire & fastboot flash recovery wildfire.img
6. Download & install HBOOT driver from unrevoked. Go into bootloader (volume down & power), select fastboot. Connect your phone & it will display fasboot usb cable
(take this part from web - Author: Joel512)
Next step just need to download and run SuperOneClickv1.9.5 and restart
I don`t known if you people already know. If so I apologize
Sorry for my Inglish
It would be more useful if u can share the video 'how-to' in YouTube I'm yet trying dis coz on Mac rite now.
Damag3 said:
Since January i been waiting to root my phone. Htc wildfire 2.2.1
I already tried with unrevoked, and a lots of other ways and never with sucess annd today i have been sucess
I root my wildfire with alpharev to put S-Off and then with SuperOneClickv1.9.5.
Restart and voila.....
Go to hxxp://alpharev.nl/x/beta/ & download the windows version
2. When it asks you for the serial, enter your phone's serial number. Go to Settings > About phone & enter your serial. Copy the code given into notepad
3. Make sure you turn on USB debugging in Settings > Application > Development
4. Install the HTC Driver. Mine is in the memory card that came with the phone
5. Extract & run alpharevx.exe. Use the code given earlier. Then connect your phone. It should detect & your phone should display USB debugging mode
6. Wait for it to complete. Once it is completed, you can remove your phone.
7. To check turn off your phone. Then press volume down & power. On top it should display alpharevx & s-off
Clockwork recovery
1. This is to enable you to install a custom rom, and also for backup
2. Get the fastboot tool for windows
3. Copy the fastboot file you downloaded to the alpharevx folder. Copy the folder to drive C so it is easier to run command prompt. Rename the folder to wildfire
4. Download the recovery for Wildfire. Extract & rename it to wildfire.img
5. Open command prompt. Type cd c:/wildfire & fastboot flash recovery wildfire.img
6. Download & install HBOOT driver from unrevoked. Go into bootloader (volume down & power), select fastboot. Connect your phone & it will display fasboot usb cable
(take this part from web - Author: Joel512)
Next step just need to download and run SuperOneClickv1.9.5 and restart
I don`t known if you people already know. If so I apologize
Sorry for my Inglish
Click to expand...
Click to collapse
Hey thanks for the SuperOneClickv1.9.5 info!!! I was searching for a one click rooting alternative!!!
imkr said:
It would be more useful if u can share the video 'how-to' in YouTube I'm yet trying dis coz on Mac rite now.
Click to expand...
Click to collapse
What are you trying on Mac.
AlpharevX will not support Mac platform right. Only windows and Linux supported. Easiest is Linux. Live CD is perfect.
Sent from my HTC Wildfire using XDA App
bharatgaddameedi said:
What are you trying on Mac.
AlpharevX will not support Mac platform right. Only windows and Linux supported. Easiest is Linux.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Yes! it doesn't working on Mac
HEy I have successfully turned S-OFF. When I try doing the Clockwork recovery thing it gets struck at waiting for device!! Any advice??
ameya88 said:
HEy I have successfully turned S-OFF. When I try doing the Clockwork recovery thing it gets struck at waiting for device!! Any advice??
Click to expand...
Click to collapse
uninstall htc sync if you have it installed.
Its uninstalled, thats the first thing I did to avoid any complications!!
Now what do I do???? I waited for around 20 mins but its not going ahead!!
try this way http://forum.xda-developers.com/showthread.php?t=1130044
The guide referenced in the link above sure worked for me
Just a word of advice, the linux version of alpharevX gets stuck on 'waiting for device' on my ubuntu 11.04 so don't use it... if you are gonna be using alpharevX to root your phone do not do it on a virtual machine (wouldn't work on my winxp in VMware Player, the phone would just reboot and get stuck), do it on a proper win machine.
ameya88 said:
HEy I have successfully turned S-OFF. When I try doing the Clockwork recovery thing it gets struck at waiting for device!! Any advice??
Click to expand...
Click to collapse
After s-off, waiting for device should be in the fast boot flashing recovery process. If it is so, the device is to be connected in fastboot mode and then the command "fastboot flash recovery recovery.img" is to be entered from command prompt (command prompt cd into fastboot folder, and recovery.img is also to be kept in this folder). The waiting for device warning around 1min is normal but shouldn't take more.
Ignore if going with other process.
Sent from my HTC Wildfire using XDA App
bharatgaddameedi said:
After s-off, waiting for device should be in the fast boot flashing recovery process. If it is so, the device is to be connected in fastboot mode and then the command "fastboot flash recovery recovery.img" is to be entered from command prompt (command prompt cd into fastboot folder, and recovery.img is also to be kept in this folder). The waiting for device warning around 1min is normal but shouldn't take more.
Ignore if going with other process.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Tried it but device still gets stuck at <waiting for device> mode after I type fastboot flash recovery wildfire.img
ameya88 said:
Tried it but device still gets stuck at <waiting for device> mode after I type fastboot flash recovery wildfire.img
Click to expand...
Click to collapse
Make sure your Wildfire is in Fastboot Mode. Power Down your phone, Start with Vol Down + Power Key. This will open Bootloader Mode. Then connect to your PC with the USB Cable, Select "Fastboot' mode (By using Volume keys), and Press Power button on it.
gogusteliade said:
try this way http://forum.xda-developers.com/showthread.php?t=1130044
Click to expand...
Click to collapse
Hey thanks for the Link. I am now trying to follow the method posted in the link. Do I need to do the Hboot driver download and install thing after that or do i directly root??? Thanks by the way
3xeno said:
Make sure your Wildfire is in Fastboot Mode. Power Down your phone, Start with Vol Down + Power Key. This will open Bootloader Mode. Then connect to your PC with the USB Cable, Select "Fastboot' mode (By using Volume keys), and Press Power button on it.
Click to expand...
Click to collapse
No wonder!!! I was doing it wrong. Thanks will give it a try!!
3xeno said:
Make sure your Wildfire is in Fastboot Mode. Power Down your phone, Start with Vol Down + Power Key. This will open Bootloader Mode. Then connect to your PC with the USB Cable, Select "Fastboot' mode (By using Volume keys), and Press Power button on it.
Click to expand...
Click to collapse
I did as you said, Once I connected the phone to the PC while it was in boot loader I got a msg on the pc saying "driver not correctly installed" but I continued anyway and chose fast boot by pressing the power button. Now its giving me 4 options -> Bootloader, Reboot, Reboot Bootloader and Power down with the Title Fastboot USbB at the Top. Which do i choose??/
Are you shore u have all the files in the same folder and you need to have USB Debugger ON to.
The Alpharev take to long to finish. It`s happening the same with me.....
and you must put the code given by Alpharev website.
ameya88 said:
Now its giving me 4 options -> Bootloader, Reboot, Reboot Bootloader and Power down with the Title Fastboot USbB at the Top. Which do i choose??/
Click to expand...
Click to collapse
Don't choose anything.
This is the fastboot mode what everyone is talking about
Sent from my HTC Wildfire using XDA App
Damag3 said:
Are you shore u have all the files in the same folder and you need to have USB Debugger ON to.
The Alpharev take to long to finish. It`s happening the same with me.....
and you must put the code given by Alpharev website.
Click to expand...
Click to collapse
Yeah USB debugger is ON and all the files are in the same folder. I am just having a prob with the clockwork recovery thing. I successfully turn S-OFF
Ok, i have a mytouch 4g that has never been rooted. The problem with the phone is that all of the sudden when i try to turn it on it wont get pass the splash screen. It will just turn off and reboot to the splash screen over and over. Thing is that i can get into Hboot quite easily. I tried to reflash the stock IMAGE file and it does it well without problems. But once its done and i hit power to reboot, the phone just starts to bootloop again doing the exact same thing. I know its kinda odd but i read somewhere that if i can get into Hboot the eMMc is not fried. But then what should be the problem?
enelyam said:
Ok, i have a mytouch 4g that has never been rooted. The problem with the phone is that all of the sudden when i try to turn it on it wont get pass the splash screen. It will just turn off and reboot to the splash screen over and over. Thing is that i can get into Hboot quite easily. I tried to reflash the stock IMAGE file and it does it well without problems. But once its done and i hit power to reboot, the phone just starts to bootloop again doing the exact same thing. I know its kinda odd but i read somewhere that if i can get into Hboot the eMMc is not fried. But then what should be the problem?
Click to expand...
Click to collapse
Sounds like hardware problem = warranty replacment
RcMix 3D Darkside Glacier HD
Tdj's Demonspeed v7 Kernel
Virtuous OC Damean
ClockWorkMod Recovery 5.0.2.0
Thanks, thats what i thought. Just wanted to ask so if someone have seen this before maybe there was a solution for that. But yeah, something is not right and i also think its a hardware issue.
Same prob here...anything like odin for htc? Engineering mode? I used two diff zip files tha were supposed to be the same recovery/ stock image/zip... think it i15img.zip or something... one does not do anything cept try and parse and restart other goes thru ok ok ok ok ok ok then skips the tp tp writes and says deferred or something but looks to get the job done but nah... what are the tp writes I skips...think they are right before the radio write...arg too tired
Sent from my SPH-D700 using XDA App
vizionforever said:
Same prob here...anything like odin for htc? Engineering mode? I used two diff zip files tha were supposed to be the same recovery/ stock image/zip... think it i15img.zip or something... one does not do anything cept try and parse and restart other goes thru ok ok ok ok ok ok then skips the tp tp writes and says deferred or something but looks to get the job done but nah... what are the tp writes I skips...think they are right before the radio write...arg too tired
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
HTC's too pro to have odin
the stock image file is named "PD15IMG.zip" and should be flashed in the bootloader.
Same here, this one skip the tp tp saying Bypassed on the second tp but everything seems to run ok. Only thing is that when i hit power after the update it will just start with the bootloop again. Since this is a friend, I dont really know what version it was running. But i do know its never been rooted or anything like that. Its on .86.000 and S-on and everything. Im going to try the gingerbread just for fun and see what happens.
thinking tese are Gingerbread update fails?
Let us know how the gingerbread turns out...Someone must have a recovery zip? Its obvious the two files I am trying to flash named the same thing are not the same thing or one is corrupted....211mb takes an hour on my connection now ANYONE HAVE A RECOVERY ZIP? Is there a program like odin(OK NOW I KNOW TO USE CMD AND ADB) Now I need a mytouch button press sequence to get to ENGINEERING MODE? to write to the frickin thing...I thought HTC was gonna be better than Samsung in this respect...I have one good mytouch4g that I can get the serial using the command 'adb devices' that is once mytouch is booted up...so question is how do i get to engineering mode in my bad my touch(which wont boot) so I can PUSH the file in command line interface.
vizionforever said:
Let us know how the gingerbread turns out...Someone must have a recovery zip? Its obvious the two files I am trying to flash named the same thing are not the same thing or one is corrupted....211mb takes an hour on my connection now ANYONE HAVE A RECOVERY ZIP? Is there a program like odin(OK NOW I KNOW TO USE CMD AND ADB) Now I need a mytouch button press sequence to get to ENGINEERING MODE? to write to the frickin thing...I thought HTC was gonna be better than Samsung in this respect...I have one good mytouch4g that I can get the serial using the command 'adb devices' that is once mytouch is booted up...so question is how do i get to engineering mode in my bad my touch(which wont boot) so I can PUSH the file in command line interface.
Click to expand...
Click to collapse
Turn the phone completely off, and turn it on again using volume down+power buttons. This enters hboot, or bootloader, where you flash the stock PD15IMG.zip file.
Sent from my HTC Glacier Sense 3.5 using xda premium
Unstick my heart
I should be able to communicate with device using adb push in command line interface hboot then? I dont see any device serial with adb devices
...Was hoping there was an engineering mode like samsung has...Well some different output here getting me excited...Img zip (211mb) that used to just stall with the other stock image zip I used (that does not parse) has at least allowed the img crc to work... below are my output pictures
http://www.flickr.com/photos/[email protected]/6447958131/
and this is the .zip (output picture of it anyway) (312mb)that I first used, seemed to work better than the one I had to rename in a recent post in Q&A forum, that said the zip that seems not to work unstuck img crc so now it reads hmmm....any ideas?
http://www.flickr.com/photos/[email protected]/6447957849/
vizionforever said:
I should be able to communicate with device using adb push in command line interface hboot then? I dont see any device serial with adb devices
...Was hoping there was an engineering mode like samsung has...Well some different output here getting me excited...Img zip (211mb) that used to just stall with the other stock image zip I used (that does not parse) has at least allowed the img crc to work... below are my output pictures
http://www.flickr.com/photos/[email protected]/6447958131/
and this is the .zip (output picture of it anyway) (312mb)that I first used, seemed to work better than the one I had to rename in a recent post in Q&A forum, that said the zip that seems not to work unstuck img crc so now it reads hmmm....any ideas?
http://www.flickr.com/photos/[email protected]/6447957849/
Click to expand...
Click to collapse
Once the phone is in bootloader, connect it to the computer, and you should see "fastboot USB" on the phone. Then open up adb, and type
Code:
fastboot devices
Sent from my HTC Glacier Sense 3.5 using xda premium
EDIT: here, download THIS FILE, rename it to PD15IMG.
then place it in the ROOT of your SDcard (not in any folders)
turn off and reboot the device into bootloader
bootloader should find the file and ask if you want to update
not sure if this is the method you used... tell us how it goes
Hmm Command did not say i had any devices (blank line) but my command line interface is in fastboot / adb(whats the differnce?) seems like it sees it? tell me if Im wrong... The command 'Fastboot devices' brought up long dir of commands, then I tried the following commands faastboot push and update PD15IMG (See pic below) Thanks for your help! I will try your zip! (but I would like to push from command line fastboot)
http://www.flickr.com/photos/[email protected]/6448265267/
Currently downloading ur zip thx...23 mins left :\
THANKS!
vizionforever said:
Hmm Command did not say i had any devices (blank line) but my command line interface is in fastboot / adb(whats the differnce?) seems like it sees it? tell me if Im wrong... Fastboot devices brought up long dir of commands for adb? then I tried following commands (See pic below) Thanks for your help! I will try your zip! (but I would like to push from command line fastboot)
http://www.flickr.com/photos/[email protected]/6448265267/
Click to expand...
Click to collapse
does your device say that it's "fastboot USB" somewhere on it? if it says "HBOOT USB", manually scroll to fastboot and select it.
no it does not seem to see it is connected
http://www.flickr.com/photos/[email protected]/6448372103/
I know USB works because it attempts to orange led flashes/charges before it turns on but it does not say usb after fastboot
still waiting for download...29 mins remaining at 72kb per sec groan
vizionforever said:
no it does not seem to see it is connected
http://www.flickr.com/photos/[email protected]/6448372103/
Click to expand...
Click to collapse
hmm.. might be because you don't have the engineering bootloader.
my mom's is S-on as well, and computer can't see it through fastboot.
anyway, just use the method i told you, move it onto the SDcard manually
Computer cant see it, but can it write to it?(i want to try) What is proper command to push pd15IMG in adb/fastboot? should I do it in adb or fastboot on computer? and what mode on phone: hboot or fastboot? thx G
vizionforever said:
Computer cant see it, but can it write to it?(i want to try) What is proper command to push pd15IMG in adb/fastboot? should I do it in adb or fastboot on computer? and what mode on phone: hboot or fastboot? thx G
Click to expand...
Click to collapse
i meant taking out the SDcard and connecting the SDcard to the computer, and transfer files that way.
Understood what u meant, just wanted to try usb push ind adb while file is downloading...
vizionforever said:
Understood what u meant, just wanted to try usb push ind adb while file is downloading...
Click to expand...
Click to collapse
don't think that's gonna work :/
sorry
ehh crap same thing skips tp writes....Still stuck, any other .zip to try? HTC Device(without seperate engineering mode does not seem to more "pro" (but the htc windows drivers, they seem more robust
What to do now :| ???
thx G
---------- Post added at 09:36 PM ---------- Previous post was at 09:12 PM ----------
same thing bootloop
computer now sees a unknown usb device anyone have the .inf? Google search for "mytouch .inf" showed only 6 results none I can use... Would rather use a .inf and install from disk than use .exe
EDIT: flashed http://forum.xda-developers.com/show....php?t=1174344
not it writes to #7 TP but not #8 still in bootloop... Now cant flash cause that is most recent... Can I try to flash any custom roms? or... My s is on
Its a waste of time people, sorry to say but this is definetly a hardware issue and its been spreading all over the world with people having issues on that same subject.
I've dropped my N4 yesterday and the screen cracked.
The screen itself seems to be working but the touch doesn't...
I need to backup it but cant access it from the computer because of the password.
So, is there any way to access the phone from the computer although it's locked or
a way to remove the password?
By the way, I have USB debugging enabled and my bootloader is unlocked...
reminder: no touch...
Please, I have really important stuff in that phone!!
Thank you very much! :good::fingers-crossed:
you cand save all the files on the internal storage using abd ,but you need to have "USB Debuging" enabled
give a read on this http://forum.xda-developers.com/galaxy-nexus/general/guide-phone-backup-unlock-root-t1420351
gabe13 said:
you cand save all the files on the internal storage using abd ,but you need to have "USB Debuging" enabled
give a read on this http://forum.xda-developers.com/galaxy-nexus/general/guide-phone-backup-unlock-root-t1420351
Click to expand...
Click to collapse
I do have USB Debugging enabled...
Thanks
I have tried what you told me and it didn't worked...
Don't know what to do:crying:
Niz2720 said:
I have tried what you told me and it didn't worked...
Don't know what to do:crying:
Click to expand...
Click to collapse
If you have a custom recovery boot into it. Then
adb devices (to make sure you're connected to the phone)
adb pull /data/media/0/ c:\
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
If you have a custom recovery boot into it. Then
adb devices (to make sure you're connected to the phone)
adb pull /data/media/0/ c:\
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I don't have a costume recovery...
Is there another way to backup the phone?
Niz2720 said:
I don't have a costume recovery...
Is there another way to backup the phone?
Click to expand...
Click to collapse
If you can boot into your device try the commands I gave you from there. You have usb debugging enabled so it should work there too. The only problem is you could have to authorize the device with a screen touch.
Another alternative is from the bootloader
fastboot boot twrp.img ( where twrp.img is the full file name of the twrp image file)
That should boot you into twrp then you can use the adb commands.
Sent from my Nexus 5 using XDA Free mobile app
Nothing worked...
But Thank you anyway I don't wanna bother you:good: