Related
Hey guys,
I'm about ready to throw a brick through a window at Samsung's Headquarters, so I'm sure this will make an excellent first post.
Earlier today, my dad decided to update is rooted phone via a T-Mobile update sent out via the internet to the latest J16 firmware. Not surprisingly, his phone was one of many to get soft bricked. From this point I used ODIN to flash back to J15 and then used it again to upgrade to J16. Now, the phone boots normally, but it still seems to have ROM manager and other root applications on its hard drive despite the fact that ODIN should have wiped out all of the packages.
This coupled with the fact that I have failed to re-root the device and USB connectivity is awful compared to J15, I decided to try and flash back to J15 using ODIN. Only this time, when I get the device into download mode it isn't recognized properly as a USB device by my computer; therefore, ODIN won't recognize it either.
My dad is about ready to take the phone to T-Mobile in hopes of getting a new device, but before he attempts this I'm wondering if there are any solutions to my problems that A) Fix USB connectivity in download mode or B) Allow me to whipe all data and revert to J15 in some other manner.
Help would be appreciated!
Go_L_Den
go_l_den said:
Hey guys,
I'm about ready to throw a brick through a window at Samsung's Headquarters, so I'm sure this will make an excellent first post.
Earlier today, my dad decided to update is rooted phone via a T-Mobile update sent out via the internet to the latest J16 firmware. Not surprisingly, his phone was one of many to get soft bricked. From this point I used ODIN to flash back to J15 and then used it again to upgrade to J16. Now, the phone boots normally, but it still seems to have ROM manager and other root applications on its hard drive despite the fact that ODIN should have wiped out all of the packages.
This coupled with the fact that I have failed to re-root the device and USB connectivity is awful compared to J15, I decided to try and flash back to J15 using ODIN. Only this time, when I get the device into download mode it isn't recognized properly as a USB device by my computer; therefore, ODIN won't recognize it either.
My dad is about ready to take the phone to T-Mobile in hopes of getting a new device, but before he attempts this I'm wondering if there are any solutions to my problems that A) Fix USB connectivity in download mode or B) Allow me to whipe all data and revert to J15 in some other manner.
Help would be appreciated!
Go_L_Den
Click to expand...
Click to collapse
First and foremost make sure your plugging the usb into a usb port that is connected directly to the motherboard. Should stablize the usb connection. ( I had the same issue) Second flash to JFD via odin, then you want to upgrade to J16 via the vibrant version of kies mini. OTA update is not the greatest.
The JI5/6 updates don't wipe all data and apps, as they were designed to be OTA updates and not complete new installs. Can't have people complaining that an update wiped their entire phone, right? Stock JFD is a full flash which wipes all user data.
And yes, try to have it plugged directly into the motherboard's USB ports, make sure the contacts on the microUSB aren't corroded, and try deleting the Vibrant drivers and reinstalling them.
which version of odin you using? try 1.3 if not already
Kies or ODin
Nevermind I found it here ars.samsung.com/customer/usa/jsp/faqs/faqs_view_us.jsp?SITE_ID=22&PG_ID=2&PROD_SUB_ID=557&PROD_ID=560&AT_ID=341559
All you hace to do is go to USB settings and with the OTA update for J16, there's an option to choose "Ask what to connect" either samsung kies, mass storage, etc. Happen to me, did unroot, factory reset and there you go, just need to go to that stupid settings.
Hi,
I've been do many flash last 24 hours on my Galaxy S4(Model SGH-I337M, Telus). Initialy, i've the factory stock rom, rooted. So, yesterday, i've decided to install Cyanogen mods nightly on my phone. Not the first time i've been used it on my phone. No problem before. So, this night, after a friend show me the release canditate release seem to be more stable, i've been try to put it on my phone. So, accidentaly wipe all the data on my phone. When i'm back home, i've put again the samsung original rom from my operator(4.2.2), found here, on the website, whit odin. All completed succefully, but i've noticed that the wifi won't turn on after the flash, and no sound from the speaker. So, i've put Cyanogen nigthlies again to test if it rom relative, but same issues here, no sound, but the wifi was working. The phone was very instable, so. Then, finaly, put the original rom again, without any rooting. Stuck on samsung logo, that i've finaly got fixed by clear the data and cache. But, no sound, and no wifi. Instable too.
Precision about phone: Unlocked whit the service mode(work), and enabled AWS whit a software and file(tutorial found here)
My question is: Anything else i can do to make my phone work fine again, and does it's possible to make the phone totaly stock? When i boot up, i've noticed that the phone, whit all rom i've try, said on samsung logo: Kernel is not sendroid enfonced, warranty status: kernel, so i can't go to return my phone on warranty whit that. How i can erase that line, and make my phone seem to be no modified?
Just to specify, it's not the first time i flash a phone. Do many flash, whit galaxy s2, s3 and s4, and sure, mine. Got try Cyanogen, stock, know how Odin work and all, try many rom, and before today, never has any problem to do turn back, but now, it's seem to be impossible.
Thank you very much for your help, very appreciated!
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
jd1639 said:
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
Click to expand...
Click to collapse
I've just try this. Flash the stock rom whit odin, and factory reset on original recovery after. Same, no wifi, no any sound.
Just see yesterday, when i'm flashing, i'm flashing on the bootloader in odin(whit the tar for the stock rom). Today, correct this by flash on the pda section, still not work. Found here on the forum the stock bootloader, rom, csc, and modem, but when i do this whit odin, odin said fail.
Thank very much, i think my phone is dead, and nothing to do to exchange it on warranty.
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
saj222 said:
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
Click to expand...
Click to collapse
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
dardares said:
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Click to expand...
Click to collapse
I've seen worse software, it's no better or worse than iTunes.
Sent from my SGH-I337M using Tapatalk
dardares said:
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
Click to expand...
Click to collapse
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
mps5566 said:
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
Click to expand...
Click to collapse
This is the link i've found whit all the factory stock operator ROM. This is what rescue me.
http://forum.xda-developers.com/showthread.php?t=2269304
@Spacemonkie4207 never my itune was freeze, and i can do basic operation like transfer music or create playlist without any problem. My kies stay on connection in progress, and turn, turn, turn, but never connect. And when it connect, only one operation, and kies completely freeze, stop responding, need to close it, and open it again. Tried many cable, usb cable, reinstalling software, two other computer, but nothing to do.
I recovered back to stock from custom to 4.3 however if you do so, depending on carrier you could lose root and the ability to install custom recovery.
I would revert back to 4.2.2 (as it's knox free) go to samsungupdates (google it) and pull the 4.2.2 for your region and carrier. flash with odin 3.9
you'll lose root, but you can always perform again as long as not on 4.3 (with 4.3 u can still root if you remove all the knox stuff, u just lose warranty).
Az
I have a Samsung Galaxy S4, the Sprint version. I wasn't able to send or receive picture messages and I thought it might have something to do with my APN being wrong (I bought the phone on eBay and had it flashed to nTelos, my provider) but I wasn't able to edit the APN and nTelos was, as usual, no help. So I figured I'd just root it and be able to edit it then!
It was at that moment I stuck my shovel into the soft dirt and started digging.
Essentially, I believe my phone is without an OS at this point. I have tried using ODIN to put a recovery on there so I can at least do something, but now even ODIN is freezing up when I try and flash the Clockwork recovery. I am stuck on the Samsung S4 logo screen and while I can enter download mode I don't think I can enter recovery mode - at least, it hasn't been working tonight. I don't remember everything I've done to my poor phone, but it has to be hurting after the beating I've put it through. I originally tried to root it though I don't think I was successful because the Root Checker said I wasn't, though I'm not sure what I was doing wrong then. Things went downhill from there.
I've read through thread after thread hoping for something that would work, but I've given up trying to use other people's problems to solve my own. This is me saying "Uncle". I require assistance. Let me know what you need from me to provide me with the help I need.
Also - I have ADB on my computer and I think I have a basic understanding of how to use it, but since I can't enter recovery mode I can't do anything other than pat myself on the back for figuring it out. I think my first problem at this point is ODIN. I uninstalled KIES so that's not interfering (and don't even get me started on KIES - I installed KIES and it told me to install KIES3 which told me my device wasn't supported... which is crap because it's running Android 4.3 - or was before I got to it).
Thanks,
If you're sure the phone was on 4.3, then your options are limited thanks to Knox. You can only restore a 4.3 (MJA) based ROM to the phone via Odin, whether it is stock or custom. Easiest giveaway is if you see a line for "Knox" on the Download Mode screen.
At this point you should look in the ROM directory here for a full ROM (xxxxx.tar.md5), either MF9 (4.2.2) if it doesn't have Knox or MJA (4.3) if it does. If you cannot use Odin to put a full ROM on there, then you will need some more serious help.
Odin the stock 4.3 MJA OEM. Will return your phone to a stock unrooted state.
http://forum.xda-developers.com/showthread.php?t=2522810
I rooted to 4.4.2 and it went fine- then I realized I had lost wi-fi.
I have tried to restore and tried using odin and zip files to install a stock rom after I found a similar problem with link on
Sprint forums saying it will fix the ""button won't stay on" but the fix only works if the device is in stock rom.
answer on Sprint forum says baseband version was mk2 needs to be nae.
Return the phone to stock, run the fix for the wi-fi and then re-root.
I have downloaded and ran several roms that say they are stock- I've factory reset, cleared cache, no matter what I do,
I end up with a rooted device in 4.4.2 and no wi-fi. If I could just get the wi-fi back I would take it at this point
This was just a little quick upgrade that turned bad and long
The Sprint forum had a link to get it to nae, but wont work if rooted., so need to put the phone back to stock- run the patch and then can upgrade to kit kat again
TLDR: I cannot get my Sprint s4 back to any version that isn't rooted. I have tried several (lots) of roms that say" stock-unrooted" rom,
Never goes back to stock- stays rooted without wifi-
Ran a rom VPUAMDC_L720SPTAMDC_SPR but when I install I get msge "ifooter is wring signature invalid" - and it fails.
reformatted the sd card, tried different roms and get some message and it stays rooted and no wifi.
TLDR: need to get stock rom so I can get back wi-fi and then root the whole thing. as 4.4.2 Or 4 , if it exists)
Any options and any ideas as to where or what to do?
EDIT: for clarity cause I am not making much sense at this point
Thanks
Heh... a TL;DR for a TL;DR... the internet is becoming one crazy place.
thousandwatts said:
The Sprint forum had a link to get it to nae, but wont work if rooted.
Click to expand...
Click to collapse
Maybe a dumb question, but why not just unroot first, then?
Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed
I'm having a similar issue. This afternoon, 2 apps threw errors and closed. I rebooted, which apparently was the wrong thing to do. The reboot stalled on the AT&T logo and stayed that way for 5 min - the unit became very hot & the power button did not respond, even while holding it down. I got into recovery, cleared the cache and factory reset, then rebooted. The unit came back up and started reinstalling everything. I took it back down into the download status and attempted to reload 935x via Odin, only to stall at "initialzation" [sic] as you did. I got out of that after waiting for some sort of response. SuperSU was still in my apps as was Root Checker. Root Checker indicates the system is rooted. SuperSU indicates it needs the binary updated. BusyBox and TiBu indicate they cannot find root. I deleted all the root apps and tried reinstalling root via adb which completed successfully, but the same outcome with all the root apps. So I'm not sure if I'm still really rooted as Root Checker claims, or not.
EDIT: I just saw that I have 2 "Knox Settings" apps. Clicking on either returns, "Unfortunately, Container Agent2 has stopped."
use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.
NovaEDM™ said:
Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed
Click to expand...
Click to collapse
I was having the exact same problem you had with Odin. It seemed I was able to flash stock firmware using this version of Odin: http://www.mediafire.com/download/2t2sjqxtogbkafk/odin_3.12.3.rar
rob219 said:
use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.
Click to expand...
Click to collapse
did you have any problems with the u version of the s7 edge firmware, like the fingerprint scanner not responding? i am on that version and cant get any odin version or any version of s7 edge g935a firmware to flash, tried unrooting and was forced to use the U version of the s7 edge firmware, everything works except the fingerprint scanner, cant get back to full stock firmware, need help!
im having the exact same problem, when i put my phone into download mode and flash the stock at&t firmware, Odin get stuck in "initialization" and my phone screen displays and error message.
Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.
nicetucu said:
Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.
Click to expand...
Click to collapse
I used Odin_v3.12.3_Patched_SHA256 to flash the 935U Firmware then used Odin3_v3.11.2 to flash the June Firmware release.