Related
All,
I've exchanged many emails with the imei.check.co.uk team and also met personally one of these guys in order to be able to upload a new ROM to my O2 Orbit. I had excatly the same problem as many of you with ending the uploding process with "model invalid id" error message.
Now I'm happy to say we do have a solution.
So if you want to change your ROM (any), simply follow these instructions:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Of course you can publish the instructions...
BUT PLEASE put a BIG WARNING! It will crash the phone in case you don't have a valid key file to perfom the last step: RUN THE UNLOCKER AGAIN AFTER THE ROM MODEL SWITCH TO RECOVER FROM THE DATA CRASHED MESSAGE!
Hello,
we found a way to flash ANY artemis roms in ANY Artemis look alike device (HTC Hero too).
Tools you need:
-hexworkshop from http://www.bpsoft.com/downloads/
-Any rom
-winzip or winrar
-http://www.imei-check.co.uk/C3v1Unlock.zip
a valid UNL file for your phone.
install hexworkshop and winzip/winrar
Take any rom for example: ART_HTCWWE_11240501_026790_WWE_Ship.exe
in explorer, right click on it and select "Extract files..."
Now it will unpack all the files
You'll have now "HTCWWE_shipsigned.nbh"
right click on it and Click "Hex Edit with Hex Workshop"
You'll see on the 5th row ARTE10000
Make it ARTE***** and save file
Now right click on ROMUpdateUtility.exe and "Hex Edit with Hex Workshop"
Search for word password.it will find it at 0x3E0B0 after password replace "BsaD5SeoA" with "IMEICHECK" and save the .exe file
Now connect the phone to the pc (normal way). run the C3v1Unlock.exe
when is asking for UNL file, disconect the phone from pc, press cancel, and
close the unlocker.
Now connect the phone back to the pc (in this mode it is) and run the
ROMUpdateUtility.exe
Now follow the instructions as the upgrade it will work.
After upgrade done, run the unlocker again and this time select the correct UNLfile.
Task Done.
C3 after flashing with any WIFI roms it will STILL not have WIFI!!!
Regards,
IMEI-CHECK Team
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cheers, Martin
YESS, I have changed my GER rom to new HTC official ENG Rom, you are the best!!!!!! It's very simple to do...
yuppyyyyyyyyyyyyyyyyyy
the next step is.... backup the ROM I'm search ITA ROM form my HTC 3300.
see you later...
Good Discovery,
But the key is: We will have to pay 38USD for the "Proper UNL file" which is unique for every IMEI. Is it right?
Yeah, Thanks mr. Martin who is from Imei-Check Team. But we are still looking for a free solution.
Regards!
Tamagochi,
yes, first you have to go to imei.check and pay for the unlocking program and the unique .unl file.
P.S. I'm not a member of imei.check, just had the same problem as many Orbit users here...you can find my previous thread.
Works great on all versions.
Great support from the boys from emeicheck
Question about directions
Okay, I'm gonna try this. Do I still follow these directions exactly even though I have already unlocked the CID?
Also, when you see the line "ARTE1000" do you actually replace the "1000" part with the little stars? Sorry, I'm really new at this!
Thanks!
Yes you must do it all.
HELP
Everything went smoothly but when the device rebooted, it want me to "align the screen". It doesn't seem to be able to detect the stylus touching the screen! Can't get past that screen! Anybody know what I could have done wrong?
REF: HELP (Never Mind...)
I DID IT, I DID IT, I DID IT!!!! Just had to wait a minute or two and then everything seemed to work fine!!! TomTom is there, my WiFi is working! Thank you MAROSV and FRANCOBANCO!!!! If I can do it, ANYBODY can!! THANK YOU!!!
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
towelie said:
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
Click to expand...
Click to collapse
hi, I've just used the last HTC offical Rom (see xda ftp site..) that include TomTOm + 1 city map
byebye
Hi, I used the ROM on the Wiki page Dopod|English|DOPOD001|ARTE1****|1.25.707.2 ??/??/0?|1.25.707.104|1.25.0000|02.69.90|4.1.13.30| [Download|ftp://xda:[email protected]/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe]|[Thread|http://forum.xda-developers.com/showthread.php?t=286639]
It worked like a charm. The only problem I had was that when the Orbit re-booted after the process finished, it didn't seem to detect the sylus. I just waited five minutes and then it worked. Guess it was still getting settled in with it's new ROM. I don't know where I had the TomTom before I started the update, but it installed the German maps which were there before but as a bonus it gave me a English speaking voice which I didn't have before. It came with a German voice and I couldn't change because I had not yet upgraded the memory and had no room. So, my update was super! The only little thing is that once I changed the screen color back to blue instead of that terrible green, I couldn't get the phone part (dialing pad) to change to blue. No biggie, as now I can use my Orbit in English. I can live with the green phone pad! Maybe somebody will tweak that one. Hope this wasn't more info than you needed....
KleinMouse,
the dialing pad can be easily changed as well....just do a little seach on this Artemis forum and you will find many links pointing to skins available for WM5 phone edition.
O2 Orbit ROM upgrade info
Hi,
my o2 orbit has ROM 1.25.206.2 WWE. I wanted to know if this is the latest ROM available for my phone. I got my phone 10 days ago and i gotta do a soft reset on it every day. I had the same kind of problems with o2 Atom. But most of the issues were corrected once the ROM was upgraded. Please someone update me on my situation. Thanks
I tried the steps but i'm always getting the ERROR[300] : INVALID UPDATE TOOL - This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility
Anyone who can help me here? I already tried different ROMs but always the same message
Did you unlock with imei-check? What is your model ID ARTExxxx ?
Yes i did. My Model ID is ARTE100
Hmm, but the steps described above are necessary to follow only if your model is Orbit (ARTE200). If you have HTC P3300 or Dopod p800W or Artemis or MDA compact 3, then you don't need to do it this way. The only thing you need to do is to unlock with Imei-check. If it still doesnt work, contact their help desk.
Ok i see, very strange indeed. I did the unlock with the stuff from Imei-check but i still get the message ERROR [244] : INVALID MODEL ID . If i try the steps from your post #1 , i get the described error obove. I'll try to contact the guys from imei-check, i hope they can help me
Hi Kleine Maus, I read with great joy that you succeeded and I would like to feel the same way.... Could you kindly reply to me and give me some detailed instructions to follow? Hopefully this will work for my HTC P3300....Thanks in advance.... I really appreciate it. Best SiperX
hello everyone..
before i start i just have to say i was amazed at the quality and quantity of information found in these forums. you have done a great job! i mean it!
so having said that.. let's get to the real point cause i'm about to throw this thing to the wall
to start with, i have a Qtek s100 flashed with the NL 1.13 ROM.
it's a great ROM and i don't think the problem i'm going to describe is related to that, but just in case.
everything worked fine till today, when i tried to "skin" the standard keyboard with a mui file found here... i was stupid enough not to pay enough attention if that mui was for wm5 or 6 (i have wm2003se)
anyway i copied it in the Windows folder and did a soft-reset..
at first when i clicked the sip-button nothin happened so i thought "well that mui isn't written for _my_ .dll"
i renamed it.. did a soft-reset, deleted it.. and that was is.. from that point something really bad happened..
when i press the sip-button nothing opens.. (except transcriber) and when the transcriber opens and i switch to the keyboard no matter what it stays there not being able to close it.. like the function or sth behind the button is messed up
i did a full backup, hard reset.. with the ROM clean installed everything was ok
but when i restored the backup the same prob was there..
any ideas how can i fix it? could it be a faulty Registry issue that can be fixed without having to reinstall everything from scratch?
thanks in advance!
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
shadows of yesterday said:
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
Click to expand...
Click to collapse
can't help you or tell you the reason because you are not giving enough details about what you are trying to install, what is going wrong. How are you trying to install. Exe or .cab files. are you just getting error's during the installation
i tried to install .cab & .exe , but it says install unsuccessful, for example SPB & Battery status
mmmm
On what ?... is the cab on the phone or on the PC ???????
i tried both , but i couldnt
You have the HTC Touch Elf right? No cabs at all are instaling on your phone.
Possibiliites:
1. The cab files are being currupted either while you are downloading them or while you are sending them to your phone. FYI Cab files are to be installed via your phone not PC. Transfer the complete cab to phone and just click it to install - Do Not Unzip it. (A cab file looks like it is a zip file or a rar file wen it is on your PC but don't be fooled. it is a cab and does not need to be unzipped) you will only see a bunch of messy files and will just get confuzed. just place the cab on your phone and tap it with your stylus to initiate install
Exe's are to be installed via your PC to your phone through activsinc. place the exe on your desktop (Or wherever) and connect your phone to your PC using Activsinc. Then click the exe on your desktop and follow installation instructions - NOte you will have to still do some clicking on your phone to allow the installation.
2. you are not installing them properly and therfore follow instructions above.
3. your phone is currupt somehow (I don't see how) Try a hard reset and see if the programs will install after that. if not, you might want to return your phone for warranty (I am assuming you just got this phone and this is the first time you are trying to install something.
4. Maybe you have run out of room on your device to install any more applications (if you have been installing tons of other stuff successfully)
I have never gotten any errors installing cabs or exe's exept for when I was trying to install something that my phone did not support. (Not a valid WM application) or something like that.
Edit: You still are not give us much information - What type of error are you getting - What does your phone show/tell you?
Does it start to install and fail half way through? does it not start at all? does it install and the programs just do not run?
Tell us what program you are trying to install - what error you are getting and when you are getting it. Tell us the method you have used to install it etc....
If you want help you will have to provide us with as much information and detail as you can. Otherwise - Good Luck.
I will check back here regularly to see your response and try to help, but if you don't give us much more detail - no one will be able to help you.
Did you flashed your ROM recently?
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
shadows of yesterday said:
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
Click to expand...
Click to collapse
I don't know about battery status or wm router but TCPMP is an exe type installation. if you try to install this using your phone by putting the TCPMP installation on your phone and clicking to install, it won't work. You have to put the installation file on your computer, connect your device to your computer through activesinc. then click the TCPMP Installation on your desktop and follow instructions. Make sure you accept installation on your device when your device asks. The others may be the same
i did like that , but nothing changed , same message , install unsuccessful
shadows of yesterday said:
i did like that , but nothing changed , same message , install unsuccessful
Click to expand...
Click to collapse
Are you trying to install to your storage card or to device? Are you certain that you have enough storage space left?
Do you have any problems with Activsinc?
Have you tried downloading another copy of TCPMP - Maybe the copy you have is no good.
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
DuelMasterNG said:
Did you flashed your ROM recently?
Click to expand...
Click to collapse
You never answered the above question.
shadows of yesterday said:
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
Click to expand...
Click to collapse
I don't know if I can help you with this problem. I have never had any problems installing anything onto my device even when the app wasn't compatible. usually still installed, just wouldn't run. I am still using official stock WM 6.0 rom that came on my device. (have not ever flashed a new ROM or Radio and don't know anything about that. If you did flash a new ROM or radio, that could be what is causing your problems and you may want to examine in the thread where you got your ROM or Radio from for answers or to see if anyone else is having the same difficulties. Perhaps PM the person who cooked the ROM. If you havn't flashed any new ROM or Radio, then maybe you changed something in your registry that you shouldn't have with a registry editor (just a thought - don't know if you have ever done this) or maybe you have an app on your phone that is causing conflict when trying to install other apps. You can always try a hard reset of your device (if you don't mind starting from scratch again customizing your device) and then try installing TCPMP and see if it works right after a hard reset. That would suggest either something was changed in your registry or that another app was causing conflict. Bit of a pain in the a## having to reinstall everything(unless you don't have much installed on your device) and still no guarantee that it will work. Before doing a hard reset, you might want to look into backing up your device. (I don't know anyting about backing up - what program to use or how much it can back up such as setting or such but you might want to check it out. Also make sure you sincronize your device with your computer prior to hard reset so that all your contacts, appointments etc... are up to date that way after a hard reset you can just syncronize your device again and get your contacts and appointments etc... back.
If anyone else has any suggestions here -- Please feel free to jump in. I know that I would be really annoyed not being able to install new apps to my device.
Good luck. I hope this gets figured out for you
Rod
i had the same problem, it was unbelievably frustrating, i had to restore my X1i to factory settings, that fixed the problem.
I think you should follow hotrod101's suggestion and do a hard reset. Its quite likely that your phone has malfunctioned or something. It's probably going to save you a lot of work in the long run. Or turn in your device in one of the HTC service centers as already stated. Don't forget to back all your stuff up first.
Good Luck.
thanx alot
you did not say whether your rom is original or coked as i met some problems with cocked roms in installing arabic based applications that was easily installed before flashing me device
Did you get things figured out - If so please share with the rest what you did to solve your problem, in case others are having similar problems. Did one of our suggestions help or did you find another solution?
same problem on my Touch Pro, seams to be common ... some say that it is due to the fixed number (50 installed programs) on the touch flue ... however, I have no more information of how did they got this result, or what is the registry of this issue???
I hope if someone help on this to avoide us the headache cused by hard reset, just thinking about it make me crazy.
even hard reset is not a solution.
This message is now updated with a 100% working, and quick way of changing your language for the X2 device. I have now tested with 4 different languages (fi, en, se and de), and all worked. I also updated the cabs to report to the Update Software that the phone has an old versison. Now it does not compalin that the latest version is installed!
I have tested with these languages: GENERIC_FI, GENERIC_SE, GENERIC_UK and GENERIC_DE. The rest of the cabs are created with the same rules, so they should work to (if not, then please post here which cab does not work).
Before you upgrade, please write down the following info and fill it into the form on the download-page!! I really want this info.
I would like to know which all versions are out there, and how they are connected to the different ID:s and versions!
Code:
Software ID:
Software Version:
Customization ID:
Customization version:
Language Region:
Content version Software language:
In what country the phone is bought:
Otherwise i have to put a special form that requires everyone to fill in this info before you can proceed to download..
Just follow these steps
Get one of these cabs, and save it on yout SD-card (not phone, becaue you will erase the memory during this procedure!):
x2_generic_be.cab
x2_generic_cn.cab
x2_generic_cz.cab
x2_generic_de.cab
x2_generic_dk.cab
x2_generic_en.cab
x2_generic_es.cab
x2_generic_fi.cab
x2_generic_fr.cab
x2_generic_gr.cab
x2_generic_in.cab
x2_generic_it.cab
x2_generic_mea.cab
x2_generic_nl.cab
x2_generic_no.cab
x2_generic_pl.cab
x2_generic_pt.cab
x2_generic_ru.cab
x2_generic_se.cab
x2_generic_sg.cab
x2_generic_tw.cab
x2_generic_uk.cab
x2_sony_us.cab
x2_vodafone_es.cab
x2_polkomtel_pl.cab
Save the cab on your SD-card
Reset the memory of your phone (settings->Clear phone)
After the reboot, you have to align the screen. When finished, the phone starts to install cabs. NOW remove the battery (or press the reset-button on the back of the phone) so that the custom cabs wont get installed
Start the phone again. Now when you get a screen that asks you if you want to continut the installation process, click NO. The phone boots up to default windows mobile with no SE panels etc.
Now install the custom language-cab you downloaded to your SD-card earlier
Turn off the phone
Start the phone and keep the vol-down + power button down till you come tho the white SE screen.
Start the SE Update Software, pick your X2 and click next. Connect the phone to the USB-cable when the software asks you to do so.
After a while, the update-software informs that there is a new software-update available. Just hit next/continue and confirm that the phone's data will be erased.
There is NO need to remove any files on windows, The update software starts to automatically fetch the ROM that matches the installed custom-CAB
Now you notice that the update-software starts to download the new ROM (over 125Mb). If for some reason the upgrade does not start to install (eg. one case was with a demo X2 phone), then just let the phone complete the custom cab-installation It does a factory-reset before it resumes the install)
Below are the different language-versions available. I have not yet had time to create cabs for other languages, but if you need a specific language, then post to this thread a request so that i can create a custom cab for that language.
It would be nice if you would report to this thread if you succeed or not with this upgrade!
So, here is a list of available regions that i simply picked up from listigs of ROM:s To get the MR2-release, it has to have been released by SE...
Code:
Belgium - GENERIC_BE
Czech - GENERIC_CZ
Danish - GENERIC_DK
Dutch - GENERIC_NL
English (Generic) - GENERIC_EN
English (UK) - GENERIC_UK
Finnish - GENERIC_FI
French - GENERIC_FR
German - GENERIC_DE
Greek - GENERIC_GR
Indian - GENERIC_IN
Middle East - GENERIC_MEA
Polish - GENERIC_PL
Portuguese - GENERIC_PT
Russian - GENERIC_RU
Singapore - GENERIC_SG
Spanish - GENERIC_ES
Swedish - GENERIC_SE
Taiwan - GENERIC_TW
etc...
Needless to say that you do these tweaks on your own risk
There are two other files that go along with this, and i can confirm that it did not work for me.
ill see if i can get the other file names. but i belive there may be another thread floatinga round that has suggested this as well.
Do you mean this one?
http://forum.xda-developers.com/showpost.php?p=6522684&postcount=56
The second file contained a readme
12:00 pm 02/26/2010
DMS00758434 - set security policy 4109 (0x100d) to 3136
17:37 26.04.2010
DMS00485404 - move bing to bottom of the start menu
Click to expand...
Click to collapse
And then the the setup-file with the SecurityPolicy change (no clue what that does..)
... Continuing with issues from this thread:
http://forum.xda-developers.com/showthread.php?p=6637026
ikakoo said:
Here http://b.pix.ge/k/b98o1.png
Click to expand...
Click to collapse
I guess you are trying to install the russian version, right?
What you showed on the above screencapture is an Uk-version of the X2.
To figure out more precisely what went wrong, you need to confirm to me that you followed all steps i have explained in the first post of this thread.
i gave my phone back to the seller because it was prototype version of the x2
ikakoo said:
i gave my phone back to the seller because it was prototype version of the x2
Click to expand...
Click to collapse
I think that the hardware is the same, but with an old software.
Did you
Reset the phone
Cancel the installation of the cabs after aligning the screen?
Install the generic_ru cab?
I did this, and i had an russian x2 with the latest R3A software...
So my opinion is that you gave back a great phone!
.
yes i did like you but still was the same.
now i'm going to buy SE X10
ikakoo said:
yes i did like you but still was the same.
now i'm going to buy SE X10
Click to expand...
Click to collapse
I had a couple of times that the update did not work on the first time. What i did was that i rebooted the phone, and when it asked if i want to continue the cancelled update-process i answer yes. Now the phone asks you to accept a reset. After accepting, the phone reboots, and you are at stage one again when the phone asks you to align the screen. Again when finished, cancel the update-process by removing the battery.
Now install your generic_XX cab (download a fresh copy of it!).
Now reboot your phone at least one time. What you could do is paste the content of the following files (you can get to them via ActiveSync):
\windows\swVersionCust.txt
\windows\swvercust.txt
\windows\swVersionProduct.txt
hertell said:
I had a couple of times that the update did not work on the first time. What i did was that i rebooted the phone, and when it asked if i want to continue the cancelled update-process i answer yes. Now the phone asks you to accept a reset. After accepting, the phone reboots, and you are at stage one again when the phone asks you to align the screen. Again when finished, cancel the update-process by removing the battery.
Now install your generic_XX cab (download a fresh copy of it!).
Now reboot your phone at least one time. What you could do is paste the content of the following files (you can get to them via ActiveSync):
\windows\swVersionCust.txt
\windows\swvercust.txt
\windows\swVersionProduct.txt
Click to expand...
Click to collapse
Thank you for your solution, i think soft-reset after installing cab is mandatory.
All work as you describe, I've just flashed my X2 from English to Russian.
domestik said:
Thank you for your solution, i think soft-reset after installing cab is mandatory.
All work as you describe, I've just flashed my X2 from English to Russian.
Click to expand...
Click to collapse
Great to hear that this worked I have now for fun installed 5 different languages
Spanish Cab
Thank you for the amazing work.
Is posible get the spanish cab for the procedure ??
Regards,
Eric
thanks hertell
since we don't have SPL yet, I suggest this thread being stickyed
Some suggestions:
1.- a spanish CAB ??
2.- many users vahe tryed and tryed everything before with no success, which means their PC SEUS SOFTWARE IS ALREADY MARKED with their current I-wanna-get-rid-of language. this prevents the installation of a new language...
May I suggest you to include anohter step into your guide:
UNINSTALL SEUS FROM THE PC and reinstall it after the lang CAB has been installed
OR
delete folder C:\Program Files\Sony Ericsson\Update Service\db
gtrab said:
thanks hertell
since we don't have SPL yet, I suggest this thread being stickyed
Some suggestions:
1.- a spanish CAB ??
2.- many users vahe tryed and tryed everything before with no success, which means their PC SEUS SOFTWARE IS ALREADY MARKED with their current I-wanna-get-rid-of language. this prevents the installation of a new language...
May I suggest you to include anohter step into your guide:
UNINSTALL SEUS FROM THE PC and reinstall it after the lang CAB has been installed
OR
delete folder C:\Program Files\Sony Ericsson\Update Service\db
Click to expand...
Click to collapse
Regarding the re-installation of SEUS, or deleting the files, i say that that's pointless. I have not done that, and i can install any of my tested languages directly without having to every time download them... SEUS can even resume nicely uncomplete downloads!
I think that the Spanish language has not yet been released, but as soon that will be released, then i'll create a new cab for with spanish language.
There is one thing that puzzles me, and I would like to know a bit more about what they mean (This is an example from the GENERIC_UK rom):
Software Id: 1230-2799
Customization Id: 1231-4909
Customization Version: R22A
What do these values mean? I would apreciate if someone could explain me more in detail, and if someone could point me to a complete, then that would be even better!
If this is some kind of flavour of each specific language, then it's not a big deal for me to create a custom cab for each of these flavours.
I just added two Spanish cabs: Standard + Vodafone. With this you can change your language to Spanish. Currently there is no spanish MR2 release, but you should get the spanish previous version installed.
hi hertell can you upload this file:x2_generic_it.cab because i can't download it
mafo82 said:
hi hertell can you upload this file:x2_generic_it.cab because i can't download it
Click to expand...
Click to collapse
The file has been there all the time...
hertell said:
The file has been there all the time...
Click to expand...
Click to collapse
Man I just want to tell you that you have done an amazing job.
Thanks!!
Thank you!!
My phone is currently in Europe as i did not want to risk "bricking" it myself: better to blame someone else if it happens But you have some pretty clear instructions so if I were to do it myself, I dont think that I would have a problem.
I sent this as a link for a more experienced tech to follow and make the change from Czech to English.
Unfortunately I do not know the the answers to the questions that you recently posted on your first post in this thread but as soon as i get it back I can try to find out what I can: albeit it will already be too late because it would have been changed already.
Anyways thank you again so much for figuring this out. Dealing with SE is so frustrating: "you bought the phone in Slovakia therefore it is not meant to be used anywhere else." WHAAAAA??!?!?!? Darn SE... have some product support for once.
hi hertell,i try to change language to my xperia but every time it return vodafone spain.I try with generic_it and generic _es but seus upgrade evry time firmware vodafone
So, the same problem with "You phone already has the latest available software installed" with only button "Exit" in SEUS.
Trying all variants described there with no luck....
I've been searching for two whole days to find some WWE cooked roms for the asus p535, and i could barely find anything, so i have been searching for roms on russian sites (i love my mom, she translated a lot of info for me) I am posting this because almost 99% of links from English forums/websites are dead, and someone might be in desperate search for rom updates, just like i was. I can't put up the credits though because, as i said, i don't speak russian and i didn't want to bother my mom with it more than necessary.
I will try to periodically update this post in case i find anything new.
TO FLASH ANY ROMS YOU MUST FIRST RUN THIS EXE IN ORDER TO UNLOCK YOUR LANGUAGE
http://asapload.com/info?id=131732
Instructions on flashing roms:
1. Get a mini sd card 2gb or less
2. Format it to Fat16 filesystem (recommended, not necessary)
3. Place ASUS.UnlockLangID.exe and GalaxyII.nb0 on the ROOT of your sd card
4. Run ASUS.UnlockLangID.exe
5. Press dpad up + record + camera + power buttons simultaneously and then push the soft reset button
6. You should see a white screen with text on it, insert your usb cable or usb charger and the update should start.
7. After the update it will automatically soft reset your device
WINDOWS MOBILE 6.1 ROMS:
English lite 6.1 rom MINI: http://asapload.com/info?id=131730
English with some things russian (Some settings and voice command) : http://asapload.com/info?id=131733
English touch flo 6.5 styled rom:http://asapload.com/info?id=131735
English HTC Diamond styled 624MHz overclocked rom:http://asapload.com/info?id=131734
(Found the same on xda: http://forum.xda-developers.com/showthread.php?t=403882)
6.1 Clean:
6.5 HTC Home:
(Source: http://allppcrom.blogspot.com/2008/10/asus-p535-rom-wm61-v476108.html)
WINDOWS MOBILE 6.5 ROMS:
WM6.5_23004 (older 6.5 with slim startbutton/app rows):http://asapload.com/info?id=131737
WM6.5 with SPBshell (I use this one. It has 128mb ram support, and you can disable spbshell by deleting /windows/start up/spbshell.ink shortcut): http://asapload.com/info?id=131729
WM6.5 Pdaviet: http://asapload.com/info?id=131738
(Original link: http://www.ctrlpda.com/showthread.php?56671-ASUS-P535-ROM-WM6.5-PDAVIET-%28Build-23064.5.3.0%29&)
Linux for asus p535
NOTE: This is not a ROM! For installation instructions refer to the manual in the link below:
http://sites.google.com/site/siteofhx/Home/linux/linux-running-on-asus-p535
Link for the 64mb version:http://asapload.com/info?id=131740
Link for the 128mb version: http://asapload.com/info?id=131742
5. Press dpad up + record + camera + power buttons simultaneously and then push the soft reset button
Is any other way to do this without the reset buton? ... because mine is broken.
Thanks.
you can't gog to bootloader without combinaison button... if your button is broke, you can easily open your P535... mine is still here... sometimes i use this one to test my skins on small res...
I already opened my P535, i've just bought it. It had broken screen(the screen is fine but the touch does not work) and have change it myself by my P525 Asus screen(that works fine). Same screen P535 and P525, same batery....
I also want to try Android on P535.I loved P525 so much and now it looks very bad.
I think I need to take P535 to service, for repair that reset buton .
I wonder if there is Titanium to work on WM6 P535. Does anybody knows?
Sory for my bad english.
Thanks.
Windows mobile 6.5 works like a charm on P535... when i use my P535, i made some rom with a Friend... French & english version...
support 64 Mb & 128 Mb, clean and full stuff version...
LastesT ROM are here... http://forum.xda-developers.com/showthread.php?t=508315
About your broken Reset... you can use USB flash method... now i remember method using actve Sync...
Read more info with link !
Thanks, but I read on your site (i think) and in the tutorial it say this
"Connect your P535 to PC via USB port. Press Rec+Power button (at the same time) and then Soft Reset (Press Rec+Power button util Boot Loader program startup you will see message Waiting)."
This mean that I also cannot instal, and i am afraid to brick the phone.
To P525 I managed to change many times, in miniSD mode.
By USBloader I managed to brick my Samsun Wave s8500, so if I need to press Reset... I am afraid to brick this one to. (Of course Wave works now thanks to a friend... after 8 weeks of trying...)
But there isn't Titanium for WM6? I only want to have Titanium for the menu, not necesarly WM6.5, if it's posible.
Anyway in few days I'l take the phone to service to see that the reset buton can be fixed.
Very good job with that roms.
Thank again.
1 - TITANIUM is WM6.5 basic UI
2 - USB loader is only used to turn your device on bootlader mode then flash using MiniSD
3 - Flash is easy as well... my P535 has been flashed more than 500x... and is still alive... Flash on P535 is very easy...
If you have some trouble... you can upgrade using official method to WM6.1... no more version after this one...
Have fun !
I mean I am afraid only because cannot press reset... If the reset buton can be fixed I will instal WM6.5 ...
I tried official (I think), update by WI-FI and update by PC-Sync ... there is an error, code 80072ee7 ...
I'l wait to fix the reset buton.
Thanks for the answers.
Can someone help me please?
5. Press dpad up + record + camera + power buttons simultaneously and then push the soft reset button
when i do this, i get the white screen with do i want to reset or just carry on green button for reset, so if i press this, it just simply resets my current os and hasnt loaded a new rom
i can get to the same screen by just pressing reset and dpad up.. is this the same?
how do i actually get it to load the new os off the sd card? as i seem to fail at that point
thanks
its ok done it now, but all roms seem pretty much same crappy
does anyone have a link to one of the ones that run something like the htc touch flo interface? i have seen this one but couldnt find a donwload for it
I have instaled the one like HTC(I think) ... name is "rom0.zip"=> galaxyII.NBO I think is the one with SPBshell
I like this phone now more than S8500( this only has superamoled screen), on this OS
Can the screen be replaced by one with 256k colors?? The phone is better with a better screen. Don't knnow how to explain .
Thanks to Award982 for making this topic.
Thanks to Lesscro for creating this ROMs
lesscro said:
Windows mobile 6.5 works like a charm on P535... when i use my P535, i made some rom with a Friend... French & english version...
support 64 Mb & 128 Mb, clean and full stuff version...
LastesT ROM are here... http://forum.xda-developers.com/showthread.php?t=508315
About your broken Reset... you can use USB flash method... now i remember method using actve Sync...
Read more info with link !
Click to expand...
Click to collapse
Lesscro, i tried downloading from your site but your links from multiupload do not work. Can you please re-upload them? And also, do you maybe still have the kitchen for it and would mind sharing?
jason4656 said:
its ok done it now, but all roms seem pretty much same crappy
does anyone have a link to one of the ones that run something like the htc touch flo interface? i have seen this one but couldnt find a donwload for it
Click to expand...
Click to collapse
English touch flo 6.5 styled rom:http://asapload.com/info?id=131735
Try this one, but it isn't something very good... asus p535 is pretty much a dead phone now, no one has one these days, and i bought mine by accident two weeks ago (my neighbors father had one for gps and didn't need it anymore), because i've been looking for one for three years already (i had one but it died and i sold it for parts). There are barely any people still using this phone. If i get an english kitchen by any chance, i will try to make a good stable rom with 6.5 wm and touchflo 2d.
award982 said:
English touch flo 6.5 styled rom:http://asapload.com/info?id=131735
Try this one, but it isn't something very good... asus p535 is pretty much a dead phone now, no one has one these days, and i bought mine by accident two weeks ago (my neighbors father had one for gps and didn't need it anymore), because i've been looking for one for three years already (i had one but it died and i sold it for parts). There are barely any people still using this phone. If i get an english kitchen by any chance, i will try to make a good stable rom with 6.5 wm and touchflo 2d.
Click to expand...
Click to collapse
for some reason i can never access that site, is it working for you guys? ive tried from 2 ips and 2 computers, get same problem.
Yeah, it seems down :/ weird, it's not long ago since i've uploaded the roms up If you use skype i could send you it through there
can you transfer on big file or something?
Sorry about delay, i serach on my HDD... i can't found any ROM or any kitchen...
at this point... i have no more nb0 available... multiupload seems to be dead actually... maybe last build is still active...
but i need check multiupload !!
last build is 28238 Wm6.5.5 WWE 64 & 128 Clean & full version
Hi, user your rom, ok?
with WCE 6.5, you can do more
GPS Maps
I wonder how to download maps for GPS...
I connect to computer and try to download by tomtom automatically, but it's an error., I guess because is tomtom for HTC.
How cad I have GPS with maps?
I instaled WM6.5 with sbbshell
Thanks.
if you use tomtom, you need buy it... XDA is not a warez site...