Has anyone on Verizon with a xv6800 gotten WMWifiRouter to work? I have tried and tried and still have no luck. I installed ICS like others have said and this has still not made it work. If anyone has a xv6800 and has WMWifiRouter working, please help me out with some directions. Thank you in advanced for your help.
Mod Edit: Moved from Titan Upgrading
I use it every day
So far you said that you installed ICS so that should be ok. Make sure you turn on your wifi before wifirouter, and you know it is right when the 3 simi circles stop flashing and stay lit and the message is 'connected to wifirouter ready'. If it is like that then it is working and the problem is that maybe the wifi on the other end needs to be told to look for ad-hoc connection, some will not see one by default. Ad-hoc is the mode it uses.
It says it is conected but also says it is searching for ICS and WLAN and it never connects.
make sure your WiFi switch is on
yep
NotLutzik said:
make sure your WiFi switch is on
Click to expand...
Click to collapse
That is what happens when the wifi is not working because it must bind with it. Go into your commanager and see what your wifi looks like and that the ad-hoc connection 'wifiminirouter' is there.
i was having the same problem. I uninstalled it, turned on the wifi switch then reinstalled it. I originally installed with the WiFi switch off and that apparently was the problem.
I got it. Thanks for your help everyone.
Okay, I have to ask since I haven't figured the program out. What does this program do? It allows a computer to connect to my phone via WiFi, while my phone is connected to the data network, thus giving my computer internet? I don't know.
Thats it exactly
whiteblazer01 said:
Okay, I have to ask since I haven't figured the program out. What does this program do? It allows a computer to connect to my phone via WiFi, while my phone is connected to the data network, thus giving my computer internet? I don't know.
Click to expand...
Click to collapse
You get a cookie ;-) and not only that but it doles out many ip addresses so anyone in range of your phone can share it's EVDO.
Sweet! I like cookies! This phone really is a magic phone.
I have to admit I was wondering if this was going to work.
I live in a 1x world up here in NW Arizona. Yesterday was a road trip to Vegas, Wife had the laptop and she surfed the net through the connection and then when we got to Vegas we hit EVDO and life was very good.
I think I am going to have to get a Amp with a good external antenna for better reception though.
But this brings up another possible situation as posted above others may intercept the wifi. But cruising down the road that should be a very remote hazard.
The only problem developed last night on the way home . It was searching for ICS like the switch was off. I verifed it was correct. Looked at settings and the wifi icon was missing in action. Soft reboot brought it back and life was good again.
Conflict with Exchange
I installed the program on my Verizon 6800. My phone puts out a signal, my computer recognizes it, gets an ip address and connects, but when I open internet explorer I get the "page cannot be displayed" error.
I do have my phone receiving push email from exchange server. I went into communications manager and turned that off, but still can't connect.
The wmwifirouter site mentions this problem, but I was wondering if anyone has had any success connecting?
Thanks!
do you have your wifi switched turned on BEFORE you open wmwifirouter? your computer will still connect even if the actual connection to the internet is not there. disconnect your computer from the network. close wmwifirouter (or just soft reset for good measure). turn on your wifi switch, then start wmwifirouter, then connect. if you're on a laptop, just shut off your wireless until wmwifirouter is connected.
Thanks for the quick response.
I followed your directions:
1. Soft Reset,
2. Turn on WiFi on phone,
3. Open wmwifirouter program,
4. Turned on wireless connection on computer.
Again, everything connects, but get the same IE error. When I select the wireless network in my office, my computer connects instantly.
In the wireless LAN settings on my phone, the configuration shows:
SSID: WMWifiRouter
Mode: Ad hoc
BSSID: 02-18-41-33-01-09
Tx Rate: Auto
Channel: 11
Signal Quality: Almost a full bar
This program would be absolutely awesome if I could get it to work!
WAR_GA said:
Thanks for the quick response.
I followed your directions:
1. Soft Reset,
2. Turn on WiFi on phone,
3. Open wmwifirouter program,
4. Turned on wireless connection on computer.
Again, everything connects, but get the same IE error. When I select the wireless network in my office, my computer connects instantly.
In the wireless LAN settings on my phone, the configuration shows:
SSID: WMWifiRouter
Mode: Ad hoc
BSSID: 02-18-41-33-01-09
Tx Rate: Auto
Channel: 11
Signal Quality: Almost a full bar
This program would be absolutely awesome if I could get it to work!
Click to expand...
Click to collapse
disconnect and reconnect to the network
Do you haveto run a custom ROM to use WMWiFiRouter or can you use Verizon's MR1?
wackychimp said:
Do you haveto run a custom ROM to use WMWiFiRouter or can you use Verizon's MR1?
Click to expand...
Click to collapse
You can Verizon's one
I have WIFIRouter and love it. The only problem I have is after using it on my laptop, I have to delete the connection. If I do not the computers (Dell) wifi will only search for my phone, and will not connect to the router in my house until its gone.
I know this is not a phone issue, but a computer one, buut thought someone here might know.
Thanks
Reinstall with WiFi on - Reboot require
I was also able to get my xv6800 to work (using an iTouch) using the above suggestions. I uninstalled ICS and WMWiFi, reset the xv,and reinstalled ICS and then WMWifi "with the WiFi switch" on - thanks for the help!
I noticed that when I reinstalled ICS with the WiFi switch on, it said the changes would take effect after I restarted the xv, which it didn't do when I installed it with the WiFi switch off..
I also had to turn on the WEP encryption rather than "None" to get it to work, although that might have been fixed if I'd just reset the iTouch.
Scrufdog said:
i was having the same problem. I uninstalled it, turned on the wifi switch then reinstalled it. I originally installed with the WiFi switch off and that apparently was the problem.
Click to expand...
Click to collapse
I am not sure if this is even a problem, but before today my data connection to t-mobile would only connect when needed. For instance, if I was home then I would be connected to wifi and my data connection would turn off by itself, but would still connect if needed by a program, or whatever, that can't use wifi but needed the data connection instead. Like when I sent a MMS message for example. Then after the message was sent or whenever the program was done with the data connection then it would automatically disconnect where I would continue to use the wifi connection. Also, if I left the house then I would automatically be switched to the data connection as the wifi signal went out of range.
This is the way I liked it. Today it had changed the way it behaves. Now, the data connection stays on no matter what and I have to manually turn it off in the comm manager. Also, everytime the screen turns off and the device goes into sleep mode, or whatever you call it, the data connection automatically turns backs on while it is sleeping. For example, when I go to sleep I press the red hang up button to put it in sleep mode then I go to sleep. When I wake up in the morning the data connection is on and when I go to turn it off it shows it has been connected for however long I was asleep for.
Like I said I am not sure if this is a big deal or not, I just don't want to be charged for going over the data cap for some reason. And I am not sure if maybe there is a program in the background that might not be showing up in the task manager and is downloading data that will eventually cost me when it goes over the cap.
Now I know that certain things automatically connect to download data like mail, weather, stocks, twitter, etc., but I always thought that they could use a wifi connection if available. And if not then I know for sure that it used to at least disconnect the data connection after it was done.
I am basically asking if this is normal because it used to not be like this on my phone and if it is something I need to.be worried about? Also, if anyone knows how to change it back to the way it used to be? I would greatly appreciate it if you let me know how to do it.
Thanks,
Michael
Anyone?
All I want to know is if it is normal to always have the data connection on. So does anyone else experience this? The data connection seems to reconnect by itself everytime the phone goes in standby and stays connected until I manually disconnect it.
Thanks,
Michael
Hey I just happen to have similar problem with the data connection turning on by itself when I check email on my wifi.
If you goto comm manager - menu - connections - advanced
Under "select which networks are automatically" - select networks
Change the connection type under "programs that automatically connect to the internet..." to your wifi connection from "t-mobile data."
Seems to work for me at the moment anyways. It's not connecting automatically to data connection when I check my emails.
Hi Michael.
It's actually the default behavior for the data connection to stay on once it's activated, until it's switched off manually. You won't pass significantly more data that way than if you just turned it off right after whatever app(s) are doing using it...the only downside to leaving it on is the speed at which it drains the battery.
There are some users who choose to leave it on, just to avoid the delay when they want to use it, and there's probably tons more who don't even have any idea you might want to turn it off when not in use.
Now I could swear there's a cab floating around here somewhere that will shut off the data connection once it sits idle for 60 seconds, but I didn't turn it up in a casual search the other day, so I can't point you to it right now
As for the apps using wifi when it's available instead of calling up a data connection, every one you mentioned should do that, and those all behave that way for me...so maybe there's something else you haven't thought of yet that ignores wifi when it connects to update or whatever. I would start by turning off auto updating for any and all of those services you listed, and see if the issue persists. If so, you'll need to dig deeper to find the culprit. Do you have microsoft myphone connecting to backup maybe? That seems to ignore wifi on my phone, I'm sure there's other apps that do as well.
Today it actually quit doing it for some reason. So I have no idea why it did that for awhile. Now I read that some people were having the opposite problem, which was that they couldn't get their connection to stay on. Now, this is actually the way I want it. Oh well, I hope it stays this way now.
Thanks for your help,
Michael
I just got the mytouch4g, and was playing with the apps. I opened the my accounts app and it said something about it only works over cell network and not wifi, and that wifi will be disabled until the app is closed.
Well, now I can't re-enable wifi. And apps don't truely "close" on android.
Wifi is turned on, network is remembered from previous use, password is correct. I can see the network but I can't connect to it. Wifi status remains "Disconnected"
Try hitting "forget" when you hold down you network name and try reconnecting it again that's what i had to do. Hope this helps
thanks, looks like that did it. first bug encountered...i hope any others are as easily resolved.
Also, check the market for an upgraded version of My Account. The newer versions do not require it to disable WiFi to operate.
So, I think I messed something up. I replaced my wpa_supplicant file with a hacked one in order to recognize and connect to Adhoc wireless signals such as the on from my E4GT phone. It seemed to have worked, but I realized that there was an issue with the tablet consistently scanning even after it connected. I decided to go back to my previous wpa_supplicant which I had backed up. I kept getting an Error when attempting to connect to my home's wireless network. So I figured a Full re-installation of Overcome 1.1.0 would do the trick. Voila! It's working again!
However, I realized that my network doesn't sleep when the screen is turned off. I set it up under the Advanced Wireless Settings and still won't do it. I know it takes a while for the WiFi to actually turn off, but I have waited hours and it is still not doing it. I am running the same apps I was running before all this mess, so I doubt it is a specific app.
PLEASE HELP!
I use my rooted hyperdrive s4 as a hotspot for my home internet. It was working fine until yesterday when T-Mobile seemed to be having tower issues. My lte could barely pull 1mbps when I usually pull 15 to 30.
So I checked my apn settings and they seemed ok. Went to work and come back, towers seem ok now. The laptop contexts and recognizes the network, but I have the yellow ! And "no internet access". (Windows 8). Tried ipconfig release renew, no dice. Tried reloaded fresh rom in case a setting was messing it up, same thing.
I know this question has been asked but couldn't seem to find a solution, and I'm posting on my phone which makes research harder.
Any ideas? Windows troubleshooter says "broadband modem experiencing connectivity problems, reset router/modem"
This is driving me nuts!
Also I tried usb tether but a message pops up on phone right away saying "no internet connection" but I have lte and internet works!
I just loaded Darthstalker and now my windows 8 icon shows "internet access" but webpages do not load. But I can at least connect via USB tether, but I want wireless. 3rd party apps seem to crash and/or have errors. Anyone?
SOLVED: Downloaded a program off play store called "ISWAT tether unlocker". Hit unlock tether, fired up the hotspot and BAM. Worked like a charm.