[Q] Searching for a registry tweak - neoTouch S200 General

Hey guys,
does anyone know how to improve the scrolling speed when turning the neotouch into landscaope mode? i hate that it's juddering all the time on the original acer roms but i don't want to use any custom rom as well. could you please help me? there must be an option because brainmaster got it working in his custom roms. i love my neotouch but this problem is driving me crazy especially when using opera mobile in landscape mode.
hopefully
domi1991
p.s.: sry that i wrote everything in small letters it's 'cause i wrote this whole text on my mobile phone on the way..

No registry tweak necessary, try this:
Find the file called "yamato_panel.txt" in the root directory.
This file contains a line "2D.HwBlt=0".
Change this value from 0 to 1.
Save the changed file and make a warm start.
Display speed in landscape will become the same as in portrait mode !

thanks it worked great!!!

Thank you !

Domi1991 said:
thanks it worked great!!!
Click to expand...
Click to collapse
hey, i have a problem in scrolling speed at landscape and portrait , this tip doesn't work for me , how do i fix that lag in landscape and portrait ?, please help!

Related

Destinator PN and JJ

Hi
I succeeded to install PN on JJ but the two menu screen are HUGE
Ther should be a way (something to do with OZVGA) to make those 2 screen normal
Anyone ?
Raphael
use Tweaks2k2 to force the Destinator to start in VGA mode (VGA brute force option) this will solve your problem.
Wolfgang
Universal and destinator
I have uses tweaks2k2 to brute force vga and certainly it has made destinator very usable. However, fonts on the main screen are quite small and the bar that is meant to be at the bottom is in the middle of the screen. Also the zoom slide is not on the right hand side. Overall it is as if one cannot zoom in as much as you can when it is working perfectly.
Has anyone overcome these problems? Is it the case that with ozVga these could be overcome?
Thanks, apap
apap,
you have to change the file Destinator.inf (located in \DestinatorApps\Destinator\Common\Interface\Visual\All\)
I'll attach the file I'm using. Be aware it's for VGA mode and only in Landscape mode.
Just give it a try.
Wolfgang
Please reńame the file to Destinator.inf
Wolfgang thanx,
I tried your inf file. It did put the bar closer to the bottom. However, the font remain small and I cannot find the buttons or scroll bar. Any suggestions?
apap
Well I have a suggestion because I had exactly the same problem:
Actually,without any VGA hack,the only thing you cannot do is access a few options in the main menu,options etc...
SO what I have done is switching to VGA mode ,changing the options I need and then switching back to normal mode where screen is Okay and the main options (adress,poi,contacts) are accesible for current work.
Thanks, I will try this, but the problem tha I remember having in non-VGA mode is that when I turn to the page for inputting addresses and accessing other settings the buttons are huge. Anyway, I will try this and get back to you.
Cheers, apap
It works! Thanks again. Keep us posted on any new developments.
Guys
Here's a link to a german patch for destinator.
When you install it fixes the layout problems but also installs a german cab file.
If you then run the updated program it does run in german but you can change the language back to english.
Enjoy!!
http://www.destinatoreurope.com/de/cm/db/de2_0504_liste/DestinatorPN_Patch_WM5_DE.zip
Well I tried this German patch and now I have Huge German buttons
Personally I preferred the english huge buttons.... :lol:
numanoids said:
Guys
Here's a link to a german patch for destinator.
When you install it fixes the layout problems but also installs a german cab file.
If you then run the updated program it does run in german but you can change the language back to english.
Enjoy!!
http://www.destinatoreurope.com/de/cm/db/de2_0504_liste/DestinatorPN_Patch_WM5_DE.zip
Click to expand...
Click to collapse
The path is dead. Can anyone please upload it ?
EN version of WM5 Destinator patch!
Not sure if people have seen this, but you could try http://www.destinatortechnologies.com/en_US/support/faqs/destinatorpn.html#Install5
I haven't yet because my version installed first time - haven't tried BT yet - GPS arrives soon!
Adam

[SKN]Diamond Calculator VGA Skin V2 [Updated 08.02.08]

Hi to all !
UPDATED 08.02.08 !
V2 available.
Bugs corrected.
See pics below.
PLEASE RELOAD !!!
This is a little contribution for the HTC diamond.
Available for portrait and land mode in true VGA.
- Choose black or white skin folder.
- Install SPB calc CAB.
- Copy "Spbcalc_P_VGA" and "Spbcalc_L_VGA" files in windows folder with "Total Commander" or others.
- Do a soft reset.
- Enjoy !!!
Black Version :
White Version :
Looks great - cant wait to try it out. Thanks
Thats a lot better than the stock version. I was very disappointed with the original one.
Thank you
Yeah !
And what about a white diamond skin ?
Skin updated !
You can choose black or white skin.
Hope you like it !
Thanks
Thanks, looks good........but my calculator keys are not as yours..they travel inward as if you drew them with a horizon point 110mm towards the top.....like looking down an airport runway
2395 said:
Thanks, looks good........but my calculator keys are not as yours..they travel inward as if you drew them with a horizon point 110mm towards the top.....like looking down an airport runway
Click to expand...
Click to collapse
Ya, mine does the same. Still better than what it originally came with though.
2395 said:
Thanks, looks good........but my calculator keys are not as yours..they travel inward as if you drew them with a horizon point 110mm towards the top.....like looking down an airport runway
Click to expand...
Click to collapse
Like this ?
If yes, this one is original SPB black skin ...
You must read first post ! ...
1 : Install CAB in main memory.
2 : With "total commander" copy "diamond calculator skin" files (spbcalc_P & spbcalc_L) in windows folder.
3 : Enjoy DIAMOND Calculator Skin !
Thanks Lord Ghost
Thanks....I have found the problem
I followed your advice and reloaded your files...new download.
removed previous version and graphics
reloaded and reinstalled
graphic remained the same [wrong]
re saved the new graphic again....still the same [wrong]
soft reset made no differance
restarted calculator again and graphic was as before [wrong]
turned to landscape...Graphic was corect
turned back to portrait....graphic is now corect..
Windows must somehow cache the graphic and does not re cache until you turn the diamond to another position and then back....soft reset made no differance.
Working fantastic now...thanks from all of us.
Thanks..tested the theory
Thanks again Lord Ghost,
I tested me theory by altering your excellant graphic [and thanks for your hard and excellant work] by lightening the black so as to make it slightly better visable on the diamond.
copied them accross and yes your original graphic [cached] is there...rotated and the new graphic switches in....mystery.
Have included your graphic [you deserve the praise] with my slight allteration in contrast etc.
If you want to use...copy extracted graphics to Diamond's windows [replacing original graphics] start calculator...old graphic will be there...rotate...new graphics will click in.
Again many thanks
Hi, I've tried this on and nice work. Thank you.
However, when I uninstalled the cab file, then the calculator no longer exists?
has anybody got the same problem?
Nice work!
I have reskinned this calculator a lot to many different themes (QVGA), and was planning on a VGA version... No need anymore!
One thing though, your dot-key is one pixel off (to the left).
princEd said:
Hi, I've tried this on and nice work. Thank you.
However, when I uninstalled the cab file, then the calculator no longer exists?
has anybody got the same problem?
Click to expand...
Click to collapse
What do you mean by uninstalling the cab-file? If you don't want to store the cab-file after installing, just delete it. If you use "remove programs" however, you will uninstall the program itself.
If you are missing the original calculator after uninstalling this version, you are right. The installing of this version overwrites the original files. They are not back-upped somewhere, so the will be gone. You have to find a installer-cab for the original files somewhere.
Skin updated !
V2 is available.
See first post and reload.
Thanx and enjoy !
WELL DONE........
HTC Diamond Calulator Skin
Hi, Noobie here ..
I still have the same "airport runway effect " desipte remove and reload .
a) Have use Resco to copy the gif files from internal memory to /mydevices/windows.
b) Also try rotating the Cal from landscape to portrait .
Despite this .. The airport effect remains .. Wonder if the key here is using TOtal Commander or Resco ?
Can anyone throw a light and advise a poor new noobie here ?
using Rom 1.37.871.3WWE
Sorry Lord Ghost but...
Sorry Lord Ghost but...white graphics work...black graphics are not compatible...file size inconsistancy or ....
jasper_tay said:
Hi, Noobie here ..
I still have the same "airport runway effect " desipte remove and reload .
a) Have use Resco to copy the gif files from internal memory to /mydevices/windows.
b) Also try rotating the Cal from landscape to portrait .
Despite this .. The airport effect remains .. Wonder if the key here is using TOtal Commander or Resco ?
Can anyone throw a light and advise a poor new noobie here ?
using Rom 1.37.871.3WWE
Click to expand...
Click to collapse
I've no problem whatsoever, all works fine. Rotating works fine. Clashing with another tweak?
halloj said:
I've no problem whatsoever, all works fine. Rotating works fine. Clashing with another tweak?
Click to expand...
Click to collapse
Not sure ...
a) I transfer from PC to internal memory, 3 files , the gif files and cab file.
b) Then I install from internal memory which gives you an option whethre to install into main or internal; which i selected main ...
Earlier post states , main memory ... wonder if that got to do with the transfer ? which is highly not possible ... otherwise Cal will not even work at all .
I really wonder why ?
DO you any possible conflicts with tweaks ? Just got my Diamond few days back ...
Sigh !
Since it is written in main.. guess , I may need a hard reset .. if I cannot find .. start all over again !
Thanks much better than the original one

[REQ] HD Keyboards for VGA..

Hey!
First of all iam really sorry if this has been asked before! But i searched around and didn't find anything about it ..
I have seen some roms with The Touch HD Keyboards cooked into them but only for once because they were to buggy. I would like these keyboards on my Touch Diamond, actually it is only the Phone Keypad iam looking for as the HD keypad provides a better way of changing between words..
Has this allready been made available as a cab or ?
Btw: Hope this was placed in the right section .. Just thinking that the guys here at the diamond forum is more into hd porting than they are at the development and hacking section ..
Thank you!
~D
Just bringing this to the top.. Nobody that knows anything?
Da9L said:
Just bringing this to the top.. Nobody that knows anything?
Click to expand...
Click to collapse
Still no one that can tell me anything about this?
itje released cabs found in the xperia x1 forum.
look there.
you will find them BUT will be for WVGA so it will be a little taller on your diamond.
I tried install that keyboard on my Diamond and it says Instalation incomplete becase bla bla bla system restriction ... I don`t know why ... This is only resolution :/
EDIT: Ok instaled it on Internal not Device. But why there is so mess ... Wvga is 800x480 vga is 640x480 width is the same :/ But there is so messy in width :/
HD/Blackstone Keyboard
Well... Dug up a little and found it!
Credits to Radix999 for broadcasting it and giving a detailed instruction.
And also please thank xboxmod as the .cab is taken from his "Bell UI Test Rom" thread
... oh yah.. This Keyboard ROCKS!!! Tried & Tested on Dutty's V2.8 ROM
Radix999 said:
The new blackstone keyboard that people have talked about is an add-on and must be installed separately and was supplied in another thread.
You can download the new keyboard need from:
http://www.1filesharing.com/download/Z1TQ2XXI/
Extract the contents of the file into a temporary directory on your phone
launch the taskmgr application included
kill SIPGT_app process
then install xmicky keyboard fix.cab
a restart will be needed at the end
this will install the new blackstone keyboard with arrow keys.
Enjoy!
Click to expand...
Click to collapse
What is diffrent with this keyboard. can you maby upload a screen shot?
This keyboard has added navigation ARROWS left right up down ...
bulletproof_78 said:
Well... Dug up a little and found it!
Credits to Radix999 for broadcasting it and giving a detailed instruction.
And also please thank xboxmod as the .cab is taken from his "Bell UI Test Rom" thread
... oh yah.. This Keyboard ROCKS!!! Tried & Tested on Dutty's V2.8 ROM
Click to expand...
Click to collapse
works great,very nice keyboard.
works on swifts 7.5.
Hi!
I've tried to install this keyboard on my Diamond with 1.93 Official ITA Rom, but when I use any app in landscape I see it cutted.
Why???
Edit: It's a WVGA Keyboard? Beacause I've not a Touch HD but a simple Diamond (that is VGA). Perhaps it is the problem.
Nice guys ! Just what i was looking for.. Next thing is how do we change the language for T9 input?
Hi guys,
I haven't any clear answer.
Does it fit on the Diamond screen? In Landscape? In portrait?
I'm at work and can't try right now.
Thanks for your reply.
it does fit in portrait, not in landscape.
it is usable in landscape but it is cut of.
b.t.w.
with every thing i do, my phone opens the smal keybord in stead off full qwerty.
even if i put it on full qwerty in the settings.
Works great in portrait. Noticed if I want to start a new email or text, the phone would pick up a name or give me an option of a person to choose from when adding a name to send to. now it doesn't. Could this be linked?
when i try to dl it i get a virus warning from norton....
any mirrors?
thats norton giving you a false positive.
its famous for doing that.
Does anyone know how to change the language? Its rather pointless having this keyboard if we can't change it to the language we want..
i'm able to change the lang...
works great on my TD using duty v3.3
can someone upload this to a different server? i cant download anthing off that site

Screen Rotation for WM 6.5

Hi guys,
Sorry for the new topic but I'm having trouble finding an app to rotate the screen to landscape for wm 6.5 - I've tried gsens and it doesn't work. Can someone point me to the right direction?
Thanks
for manually change try RotateScreen
[EDIT]
ups....sorry
here is the right one...
The zip file seems to be empty :S. Thanks for the reply though however i would prefer auto rotation - I'm not sure why this isnt auto supported with the rom ....
Edit - Gyrator 2 - That's so far provided the best results!
Try Gyrator. (http://gyrator.brins0.net/) I use it on my windows mobile 6.5, and it works perfectly!
demaxmeister said:
Try Gyrator. (http://gyrator.brins0.net/) I use it on my windows mobile 6.5, and it works perfectly!
Click to expand...
Click to collapse
Gyrator2 is amazing lol. it flips the phone so fast. its way faster then it was before in apps that it would flip in. and when the phone is in landscape the keyboard still knows and changes its type. thanks for the link
i found in this it work well with my TD2 . go to this link find the software name changeScreen v2.78 – Auto Screen Rotation application

Howto installing a Rhodium dialer on stock Blackstone ROM (for landscape support)?

Hi!
I am a new Touch HD owner. The original ROM is good enough for me, but...
I bought this PDA because I'm driving often, so I am using navigation too. Of course in landscape mode. When I become a phone call, it would be great this in landscape mode too.
First I tried with enabling the landscape mode in the registry, then switching it into landscape manually. But then I became a phonecall after this procedure, it was again in portait mode.
I tried it solving with any gsensor apps, but without any success...
Then I searched and reed and reed and reed...
Then I found that the Rhodium is a "landscapable" Blackstone pda. So I searched and I found any Rhodium dialer cabs. I installed they, but finally the dialer was always the standard windows dialer. It looked like so, as the registry settings by HKEY_LOCAL_MACHINE\Security\Phone\Skin\Enabled = 0 but it isn't!!!
It was always 1!!!
Of course I installed always first the sdkcerts.cab.
So, what's wrong, why cannot I installing a rhodium dialer on my stock ROM?
Or, is it possible installing it? Then how?
Please help me!
Thx, and sorry for my bad english!
B.
blackdog7 said:
Hi!
I am a new Touch HD owner. The original ROM is good enough for me, but...
I bought this PDA because I'm driving often, so I am using navigation too. Of course in landscape mode. When I become a phone call, it would be great this in landscape mode too.
First I tried with enabling the landscape mode in the registry, then switching it into landscape manually. But then I became a phonecall after this procedure, it was again in portait mode.
I tried it solving with any gsensor apps, but without any success...
Then I searched and reed and reed and reed...
Then I found that the Rhodium is a "landscapable" Blackstone pda. So I searched and I found any Rhodium dialer cabs. I installed they, but finally the dialer was always the standard windows dialer. It looked like so, as the registry settings by HKEY_LOCAL_MACHINE\Security\Phone\Skin\Enabled = 0 but it isn't!!!
It was always 1!!!
Of course I installed always first the sdkcerts.cab.
So, what's wrong, why cannot I installing a rhodium dialer on my stock ROM?
Or, is it possible installing it? Then how?
Please help me!
Thx, and sorry for my bad english!
B.
Click to expand...
Click to collapse
i hav an touch hd and i use the blk dialer by rhodium it was a cab file and u just install it
wingtytn said:
i hav an touch hd and i use the blk dialer by rhodium it was a cab file and u just install it
Click to expand...
Click to collapse
Hm, are you using a stock or a cooked ROM?
I tried to install the black rhodium dialer cab too, from here by the second optional download: http://forum.xda-developers.com/showthread.php?t=521815
But the result is the attached first pic. As you see it is the windows standard dialer. The second is what should I see...
Same in my side. Just installed that cab and also get the Microsoft standard dialer... and some tasskbar icon changed.
Do you know another landscape enabled dialer, please?
yes, i tried 2-3 different cabs. all of them from rhodium, but always the same results...
blackdog7 said:
yes, i tried 2-3 different cabs. all of them from rhodium, but always the same results...
Click to expand...
Click to collapse
did you solved this issue? I have the same results as you had....
Unfortunatelly no!
I think we must searching a cooked ROM wich has an integrated Rhodium dialer.
Happy new year!
B.

Categories

Resources