Destinator PN and JJ - JASJAR, XDA Exec, MDA Pro General

Hi
I succeeded to install PN on JJ but the two menu screen are HUGE
Ther should be a way (something to do with OZVGA) to make those 2 screen normal
Anyone ?
Raphael

use Tweaks2k2 to force the Destinator to start in VGA mode (VGA brute force option) this will solve your problem.
Wolfgang

Universal and destinator
I have uses tweaks2k2 to brute force vga and certainly it has made destinator very usable. However, fonts on the main screen are quite small and the bar that is meant to be at the bottom is in the middle of the screen. Also the zoom slide is not on the right hand side. Overall it is as if one cannot zoom in as much as you can when it is working perfectly.
Has anyone overcome these problems? Is it the case that with ozVga these could be overcome?
Thanks, apap

apap,
you have to change the file Destinator.inf (located in \DestinatorApps\Destinator\Common\Interface\Visual\All\)
I'll attach the file I'm using. Be aware it's for VGA mode and only in Landscape mode.
Just give it a try.
Wolfgang
Please reńame the file to Destinator.inf

Wolfgang thanx,
I tried your inf file. It did put the bar closer to the bottom. However, the font remain small and I cannot find the buttons or scroll bar. Any suggestions?
apap

Well I have a suggestion because I had exactly the same problem:
Actually,without any VGA hack,the only thing you cannot do is access a few options in the main menu,options etc...
SO what I have done is switching to VGA mode ,changing the options I need and then switching back to normal mode where screen is Okay and the main options (adress,poi,contacts) are accesible for current work.

Thanks, I will try this, but the problem tha I remember having in non-VGA mode is that when I turn to the page for inputting addresses and accessing other settings the buttons are huge. Anyway, I will try this and get back to you.
Cheers, apap

It works! Thanks again. Keep us posted on any new developments.

Guys
Here's a link to a german patch for destinator.
When you install it fixes the layout problems but also installs a german cab file.
If you then run the updated program it does run in german but you can change the language back to english.
Enjoy!!
http://www.destinatoreurope.com/de/cm/db/de2_0504_liste/DestinatorPN_Patch_WM5_DE.zip

Well I tried this German patch and now I have Huge German buttons
Personally I preferred the english huge buttons.... :lol:

numanoids said:
Guys
Here's a link to a german patch for destinator.
When you install it fixes the layout problems but also installs a german cab file.
If you then run the updated program it does run in german but you can change the language back to english.
Enjoy!!
http://www.destinatoreurope.com/de/cm/db/de2_0504_liste/DestinatorPN_Patch_WM5_DE.zip
Click to expand...
Click to collapse
The path is dead. Can anyone please upload it ?

EN version of WM5 Destinator patch!
Not sure if people have seen this, but you could try http://www.destinatortechnologies.com/en_US/support/faqs/destinatorpn.html#Install5
I haven't yet because my version installed first time - haven't tried BT yet - GPS arrives soon!
Adam

Related

Screen Rotation for Dummies (SRS)

Hi,
This is seems to be the last version of our magic tool - Screen Rotation Service (or SRS). It includes Second Edition's Today Theme (menu & today scrollers support in landscape) and feature to automatically resize your today screen for Landscape Theme!
(Download it here: setup.armv4.exe)
During installation you will need to answer "Yes" to this message:
Code:
The file"\Windows\ace_ddi.dll" is hidden, read-only, or a system file. Would you like to replace the existing file?
After installation you need to go to: [Start menu] - [Settings] - [Today] and select "WMSE" theme from the list
And one more, minimize (X) your programs before switching
Thanx to abc and everyone here!
Re: SRS HE = Halloween Edition
Feel free to post your feedback/questions on this version of SRS to this thread
More recommendations that i remember about SRS:
1) Do not soft-reset your device when in landscape-mode
2) Minimize (X) your programs when switching between different modes
To install SRS-HE:
1] Download SRS-HE to your PC
2] Run it to get "setup.armv4.cab"
3] Copy this file to your PDA
4] Tap on it to install SRS-HE
5] Soft-reset your device
6] Go to [Start Menu] -> [Settings] -> [Today]
7] Select "Wmse" Theme from the list
8] Use [Start Menu]->[Settings]->[SRS] to switch the modes
SRS Support Team ;-)
Another thread about SRS? Which is the main one?
So does this version still demand ROM 1.72?
SiliconS said:
So does this version still demand ROM 1.72?
Click to expand...
Click to collapse
No it is installable on any Himalaya device with any combinations of ROM, radio and ExtROMs
If it doesn't run at your specific system, you can always uninstall it without any damage. It really worth to try!
Yeah, I have ROM 1.60 (latest O2 UK rom) and it didn't work very well at all. Half the OS had problems, including the camera (even v2.5), the Today screen and many of the Control Panel applets.
I've seen reports on this site of people having fewer problems with ROM 1.66, but I don't think anybody has claimed that they've got it working with ROM 1.60 without problems.
Still, I'm hoping O2 UK are going to release 1.72 tomorrow!
SiliconS said:
Yeah, I have ROM 1.60 (latest O2 UK rom) and it didn't work very well at all. Half the OS had problems, including the camera (even v2.5), the Today screen and many of the Control Panel applets.
Click to expand...
Click to collapse
Where did you get such ROM version? And why you are not moving to 1.72? It doesn't really matter who the supplier of the ExtRom is (imate, qtec, tmob...) it is a matter of OS rom content. So, just update your device and receive a set of 1.72 advantages (faster BT binding, greater performance, no good CT and so on)
SiliconS said:
I've seen reports on this site of people having fewer problems with ROM 1.66, but I don't think anybody has claimed that they've got it working with ROM 1.60 without problems.
Click to expand...
Click to collapse
Did you install it yourself or just looked through the old posts?
SiliconS said:
Still, I'm hoping O2 UK are going to release 1.72 tomorrow!
Click to expand...
Click to collapse
No updates so far...
Everything seems to work fine...
But now it's very important to have phone app, calc app, WMP and cam app setted to run in landscape mode.
AVP said:
SiliconS said:
Yeah, I have ROM 1.60 (latest O2 UK rom) and it didn't work very well at all. Half the OS had problems, including the camera (even v2.5), the Today screen and many of the Control Panel applets.
Click to expand...
Click to collapse
Where did you get such ROM version? And why you are not moving to 1.72? It doesn't really matter who the supplier of the ExtRom is (imate, qtec, tmob...) it is a matter of OS rom content. So, just update your device and receive a set of 1.72 advantages (faster BT binding, greater performance, no good CT and so on)
Click to expand...
Click to collapse
I got the update from my service provider: O2 in the UK. It's the latest version available, at the moment. I don't need all the hassle of messing about with ROMs from other countries and providers. I'll wait until the next ROM is released by O2 for me. (Tomorrow.)
AVP said:
SiliconS said:
I've seen reports on this site of people having fewer problems with ROM 1.66, but I don't think anybody has claimed that they've got it working with ROM 1.60 without problems.
Click to expand...
Click to collapse
Did you install it yourself or just looked through the old posts?
Click to expand...
Click to collapse
I installed the latest version last Thursday as posted by abc, i.e. before this site got borked. I posted a long reply to the original SRS thread with my feedback, but it got lost. :roll:
asci said:
But now it's very important to have phone app, calc app, WMP and cam app setted to run in landscape mode.
Click to expand...
Click to collapse
I think unapproachable2k found how to fix this. He created LS skins but I couldn't figure out where to place them (see srs:... thread)
I think unapproachable2k found how to fix this. He created LS skins but I couldn't figure out where to place them (see srs:... thread)
Click to expand...
Click to collapse
Well I guess the skins are not all we need to have them work in landscape mode. What we need are dll files who "teach" to app what skin to chose... :roll:
SiliconS said:
I got the update from my service provider: O2 in the UK. It's the latest version available, at the moment. I don't need all the hassle of messing about with ROMs from other countries and providers. I'll wait until the next ROM is released by O2 for me. (Tomorrow.)
Click to expand...
Click to collapse
Did you contact with them? And what about WM2003SE update? Please tell me they will do this also!!!
SiliconS said:
I installed the latest version last Thursday as posted by abc, i.e. before this site got borked. I posted a long reply to the original SRS thread with my feedback, but it got lost. :roll:
Click to expand...
Click to collapse
The version in this thread doesn't fix some control panel applets but does well on start menu & today screen
asci said:
Well I guess the skins are not all we need to have them work in landscape mode. What we need are dll files who "teach" to app what skin to chose... :roll:
Click to expand...
Click to collapse
He posted that too and i got stuck with all this stuff much deeper
Now I use Pocket Winamp instead of WMP
Excel instead of Calc
Camera is ok if in portrait
And i dial 789 by pressing between 456 and bottom toolbar Had no zero numbers yet
He posted that too and i got stuck with all this stuff much deeper
Click to expand...
Click to collapse
If I remember in that post there was no dll file. However I think that post is lost...
Camera is ok if in portrait
Click to expand...
Click to collapse
Yes but I can't see control buttons, just switch off one
or did I was wrong?
dlls
Here is a link to dlls for WMP (dlls)
or did I was wrong?
Click to expand...
Click to collapse
When in camera use "Contacts" hotkey to switch camera's modes...
Does the camera work the same on pda2k? They have 2.5, do they?
To clarify: As I said in http://forum.xda-developers.com/viewtopic.php?p=63690#63690 ,the Dll's modded files are not complete,THEY ARE NOT WORKING,we need to manage theme more.. more dll's,more registry keys..
So I posted it there hoping in someone help.
unapproachable2kx said:
To clarify: As I said in http://forum.xda-developers.com/viewtopic.php?p=63690#63690 ,the Dll's modded files are not complete,THEY ARE NOT WORKING,we need to manage theme more.. more dll's,more registry keys..
So I posted it there hoping in someone help.
Click to expand...
Click to collapse
Is it possible to port Control Panel from SE?
Thanx
Sure it can..
But I am not that smart to port it..
This work is need to someone like ABC.. 8)
I have a sugestion for all of ya, I have SRS instaled on my mda II, and I like it, but don't ever set an alarm in landscape mode, my MDA was playing the stupid melody for quite a long before it stoped.
The reason is that there were no snoose an dismiss button.
Even a soft-reset won't help.
Maybe the action button, but mine stoped by itself.
gotcha_mdaII said:
Even a soft-reset won't help
Click to expand...
Click to collapse
Gee, you're lucky coz there waz guy who made hard-reset to fix this
But all u need to do is just press your joystick
[OT] Where is ABC? is AVP the same of ABC or not? We need ABC back!
:roll: :roll: :roll:

big dialer....fast keypress

got dialer from http://buzzdev.net/index.php?option...=view&id=9340&catid=36&limit=15&limitstart=90
Then inverted images in photoshop.
works on my qtek 9100.
Can't get smart dial to work, but i can live without it.
laich71 said:
got dialer from http://buzzdev.net/index.php?option...=view&id=9340&catid=36&limit=15&limitstart=90
Then inverted images in photoshop.
works on my qtek 9100.
Can't get smart dial to work, but i can live without it.
Click to expand...
Click to collapse
Big thanks.... I'll have to read the thred fully my self.
Terran
WORKS FLAWLESS!
Is the smart dialing still working with this skin? I just love that app...
They say not to install on Wizard...
You installed the ETEN dialer?
installed, changed the bitmap (inverted colors).
it works, but not intellidialer.
Then it`s a no go 4 me
procedure:
1) install E-TEN_M600_Dialer_Skin.cab on PPC
2) copy each Pcv*.bmp from Windows directory of PPC to your PC;
3) open each bmp file with MS Paint and invert colors (this is only for the aspect, not the functionality):
4) copy the bmp files back to PPC;
5) softreset.
*) the speed of the dialer is the same
*) I don't know a rollback operation different from harderesetting;
Can you give me the link for the CAB?
follow the link at the beginning of the thread.
Yes, ok thanks
It works perfectly....
I think that the only way to go back without an hard reset is to bring back the registry key pointing at the .dll
no Smart Dialing
How would i go about changing the the main colour. I did'nt really want a blue dialer.
cheers
these are the grafic file. do what you want to the colours but don't rename or change size or format.
originals before colours inverted if you're partial to orange
works on Dopod 838,
it's a beauty, very helpful when you use to dial with yr fingers instead of the stylus
THKS GUYS
Does this work on iMate Jam?
or can somebody help convert it into Jam's pad
I would soooo love using this instead
Xadaa said:
Does this work on iMate Jam?
or can somebody help convert it into Jam's pad
I would soooo love using this instead
Click to expand...
Click to collapse
Give it a try, you'll have to hard reset if it don't work as i don't know how to uninstall. but i was so fed up with the the standard small buttons on wm5 i just didn't care.
use this cab file to install cos it puts every thing where it should go and sorts out the registry setting.
http://buzzdev.net/components/com_simpleboard/uploaded/files/E-TEN_M600_Dialer_Skin.cab
Maybe if you backup the registry first and then if you don't like it just restore it back, may work as uninstall
Do you think this will work on qtek 9090?
thx
If anyone wants orange skin in italian...
I made these...

Ameo freezes with ozVGA

Hallo all,
after reading in several Threads about ozVGA to be one of the top 10 software to be installed on the Ameo I tried to install, too.
However - this became a complete disaster ;-((.
I downloaded the files, installed them as described. I didn't make any changes to the default settings in ozVGA and then pressed the ozVGA Button. After re-boot I only got a white screen with a much smaller "device-busy-icon" (<- you know what I mean ? ).
No reaction from device any more, had to perform a hard-reset and to reinstall everything.
What went wrong ?
Dieter
I have also problems with oZVGA on Ameo. You can try TrueVGA it is much better....
http://www.ppc-welt.info/community/showthread.php?t=107916&highlight=vga+tool
It is a german Page were you can see a very good discription how to install True VGA.
dieterpapa said:
Hallo all,
after reading in several Threads about ozVGA to be one of the top 10 software to be installed on the Ameo I tried to install, too.
However - this became a complete disaster ;-((.
I downloaded the files, installed them as described. I didn't make any changes to the default settings in ozVGA and then pressed the ozVGA Button. After re-boot I only got a white screen with a much smaller "device-busy-icon" (<- you know what I mean ? ).
No reaction from device any more, had to perform a hard-reset and to reinstall everything.
What went wrong ?
Dieter
Click to expand...
Click to collapse
Same think happened to my dopod u1000, never success to install qVGA, but MrTrueVGA run very smooth. But revert back to SEVGA, coz many think goes crazy (Many programs look tiny funny), the keypad from VJ, is not to god for me. Many games didn't run well to...
bigsmart said:
I have also problems with oZVGA on Ameo. You can try TrueVGA it is much better....
http://www.ppc-welt.info/community/showthread.php?t=107916&highlight=vga+tool
It is a german Page were you can see a very good discription how to install True VGA.
Click to expand...
Click to collapse
Thanks a lot - runs very well.
However, there is a question I have: How to switch back to "standard" ?
Dieter
Just run the program/shortcut named "VGAtoggle". It's located under \Windows\Start Menu, so if you're using a localized unit (like I do) you might want to move that shortcut.

HTC Diamond Keyboard on VGA devices (quick fix)

I was disappointed to see that the HTC Diamond Keyboard CABs found here on XDA-DEVS were all for QVGA. I wanted to test it out on my Dell x51v, but the keyboard would not display correctly.
So what I did was extract the image files from the CAB, resize them to double their resolution, and recompile them into these two CAB files for ease of installation. All the CABS do is overwrite the image files installed by HTC Diamond keyboard to VGA equivalents.You must fully install the keyborad and languages from another CAB file BEFORE installing this CAB file to work.
Note: I admit, resizing images is not the best method of converting QVGA to VGA. Some images may appear blurry. How good this displays for you depends on how sharp is the screen on your device. This will at least allow you to try the keyboard on a VGA device.
I installed the Gullum Diamond Keys CAB found here. I prefer it over P1Tater's version found here because it seems to work well on my device. The images were extracted from P1Tater's because it has all languages in one cab.
The "ENG" Cab file contains the images needed for the english keyboard.
The "OTHER" Cab file contains the images for ESN, RUS, WWE, FRE, PTG, NORDIC, GRK, GER, and ARA.
(Please post if a true VGA version of Diamond Touch Keyboard surfaces)
Someone sorta beat you to it, I think.
http://forum.xda-developers.com/showpost.php?p=2204377&postcount=73
Hope that helps.
wow this is stupid. the original manila keyboard files aka diamond keyboard files are vga and have been resized to qvga. get the vga files and they will look like they should and be original vga.
Yeah, the original VGA graphics would be much better, but without them the only alternative is to upscale the QVGA graphics or redrawing from scratch.
Since I know the true VGA graphics are out there somewhere, redrawing is unnecessary and a waste of time. This was quickly done. I described this as a temporary fix in the OP. Some people may not care about the fuzziness. Once the true VGA CAB is release, this will gladly become obsolete. LennySH from HTCGeeks says he has the VGA graphics and should be releasing a better fix. Use this if you want to try the keyboard now and use the better version when it comes out.
Note, this overlays the graphics for all three keyboard, not just the QWERTY like the other post.
nonpaq said:
Yeah, the original VGA graphics would be much better, but without them the only alternative is to upscale the QVGA graphics or redrawing from scratch.
Since I know the true VGA graphics are out there somewhere, redrawing is unnecessary and a waste of time. This was quickly done. I described this as a temporary fix in the OP. Some people may not care about the fuzziness. Once the true VGA CAB is release, this will gladly become obsolete. LennySH from HTCGeeks says he has the VGA graphics and should be releasing a better fix. Use this if you want to try the keyboard now and use the better version when it comes out.
Note, this overlays the graphics for all three keyboard, not just the QWERTY like the other post.
Click to expand...
Click to collapse
Will this also fix the problem of numbers showing instead of the letters in the keypad mode?
Thanks in advance.
cheers mate
ariel0103 said:
Will this also fix the problem of numbers showing instead of the letters in the keypad mode?
Click to expand...
Click to collapse
All I can say is that I dont have that problem using the Gullum CAB with English Keys. See first post images.
Edit: I just realized you may be refering to numbers being typed instead of letters in keypad. I experienced this once, when switching to another program while the keypad was up, only numbers would be entered. I found the only way to reset back to text entry was to hit the "options" key, then close down the settings panel. Letter entry would be restored.
nonpaq said:
All I can say is that I dont have that problem using the Gullum CAB with English Keys. See first post images.
Edit: I just realized you may be refering to numbers being typed instead of letters in keypad. I experienced this once, when switching to another program while the keypad was up, only numbers would be entered. I found the only way to reset back to text entry was to hit the "options" key, then close down the settings panel. Letter entry would be restored.
Click to expand...
Click to collapse
Thank you for your reply. Yes, I noticed that as well that in order to reset back to text entry is to go to the options but this is such a pain.
Hope that there will be a fix for this soon.
Thanks again.
Diamond keyboard VGA overlay working great
nonpaq said:
I was disappointed to see that the HTC Diamond Keyboard CABs found here on XDA-DEVS were all for QVGA. I wanted to test it out on my Dell x51v, but the keyboard would not display correctly.
So what I did was extract the image files from the CAB, resize them to double their resolution, and recompile them into these two CAB files for ease of installation. All the CABS do is overwrite the image files installed by HTC Diamond keyboard to VGA equivalents.You must fully install the keyborad and languages from another CAB file BEFORE installing this CAB file to work.
Note: I admit, resizing images is not the best method of converting QVGA to VGA. Some images may appear blurry. How good this displays for you depends on how sharp is the screen on your device. This will at least allow you to try the keyboard on a VGA device. . . .
Click to expand...
Click to collapse
Well, I think you did a fantastic job!! It installed fine on my x51v, and looks great! Now thumb typing is easy! I love using the 20-key Diamond keyboard!
Props and thanks for doing this!
will this keypad work in Opera Mobile 9.5?
I found that the QVGA ones didn't produce any letters in, say the google searchbar
I have a problem with your keyboard - I've installed it and it appear as keyboard but I can't use it, I can't write any letters. Must I first install gullum's program?
thanks!
best 12nala34

Updated: Combo HTC 3G Dialer and SmartDial (3 April 2009)

Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab.
4. Copy the white background video buttons from this link (http://forum.xda-developers.com/showpost.php?p=3486541&postcount=36) to \Windows. (New screen capture had been added).
5. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing
Reserved for future needs
great work look nice
congratulation for your dialer
great work, i've been searching for this for long timee.. thx dude
I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
Thanks for your work.
My Phone is Dopod 810 or Trinity
nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work
it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.
bigsilly said:
I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
View attachment 112863
Thanks for your work.
My Phone is Dopod 810 or Trinity
Click to expand...
Click to collapse
Glad it works for you and thanks for using it.
nir36 said:
it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.
Click to expand...
Click to collapse
Glad it works almost perfect for you and thanks for using it.
thorfr said:
nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work
Click to expand...
Click to collapse
Thanks for the feedback that it won't work for ks20.
great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!
mimmo_kallon said:
great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!
Click to expand...
Click to collapse
Glad it works for you too! Thanks for the feedback.
I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?
Francois57 said:
I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?
Click to expand...
Click to collapse
Sorry, not too sure but if you think it is due to the two files, and if you have the right French files, pm me and let me know. I can change the two files for you and make a new cab.
Thank you for the proposal. I need first to find the 2 files.
zard said:
Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing
Click to expand...
Click to collapse
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..
nosedive said:
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..
Click to expand...
Click to collapse
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.
zard said:
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.
Click to expand...
Click to collapse
yes i did ... i actually did remove the entries from my rgus from rom kitchen and did then cook it in, but still the same issue
i guess it has something to do with that reg-key HKLM\SOFTWARE\HTC\PHONE\NikeOptionOnOff .. i did set this to 0 and the phone did actually not dial after softreset - but still "auto-dial" when switching on from standby
I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.
kostas-k said:
I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.
Click to expand...
Click to collapse
Can you do a screen capture of the icons on the taskbar before and after you installed the dialer?
Thanks.

Categories

Resources