Database Users

Galaxy Apollo Froyo Question

Good Afternoon everyone,
My partner has a Samsung Galaxy Apollo (Which I beleive is I5801?). She still has Android 2.1 and is getting annoyed with it as it has bugs and she can't use Internet Tethering.
I have checked on Kies and there is no update is there anyway I can get 2.2 on it?
I have seen this post: http://forum.xda-developers.com/showthread.php?t=858569
There is no actualy one that says Froyo next to a I5801 but can the I5800 go on the Apollo? If not has anyone managed to get 2.2 working on the Apollo and how because I have been pulling my hair out trying to find a way.
Thanks,
Max

You can flash i5800 firmwares on to i5801s, but remember to remove boot.bin and sbl.bin to keep your i5801 boot screen. There are certain risks like losing IMEI and/or WiFi MAC address. Just flash the i5800 froyo firmwares with Odin, there is a guide on it somewhere in the section.
Sent from my GT-I5800 using XDA App

Thanks. I will have a look into that tomorrow then and get ready to flash

Updating the Galaxy Tab to the latest firmware !

Hey guys
I'm running the P1000JXJJ1, FroYo JPJJ2 firmware on my Tab, and samfirmware states P1000JVJL1 is the latest one !
so I was advised NOT to use KIES, and ODIN was better !!
My tab is rooted with OCLF set, Just a quick question, Odin will delete all my data and also I believe that I'd have to re-ROOT the device right?
another question is since I didn't have market out of the box, the product sales code has been changed to XSG.
thanks a lot guys in advance
Cheers
Jackie

if u use oclf, undo oclf b4 update firmware, kies or odin works fine for me, i'll only use odin when i screw up with my tab

and will I have to re root the device and also will ODIN delete all my data?

Hi,
searching for something else I accidentily found this thread.
Maybe my experince might be of any interest: got the galaxy tab 3 days ago, installed KIES and instantly got a message to update the firmware to Froyo JK5. I followed the suggestion to save my data which I regret later, because it took very long (had already copied a lot of videos to the internal sd) and couldn´t stop it. To cut it short:
the update was successful and nothing deleted, just everything in place. Also synchronized Outlook contacts, though at 96% it got stuck - waited a few minutes, then broke up and all contacts had been transferred fine.
(don´t know, if firmware is different for other countries...)

Odin will not delete your data if you did not choose to repartition, no need to use pit file to repartition if you are just upgrading fw from the same region..safest is still via KIES

To correct some mis-information from above. Flashing with Odin can delete your data, it depends on what components are included in the image you flash. If you flash an official ROM with Kies you should not loose your data but there is always a risk of an issue occurring during any flash that could lead to data loss. Unless you flash a pre-rooted custom ROM you will loose root and SU during a flash. These can be re-applied easily to the SGT using the Super One-Click method.
Redardless of what flashing method you use, if you use RyanZA's OCLF you must undo the lag fix before you flash, otherwise you will certainly loose data and possibly end up with a corrupt system that won't boot (I had first hand experience of this early on in my flashing days with my SGS!). You shouldn't really need to apply a lagfix to the SGT as it doesn't seem to suffer from the same lag as the SGS.
Finally, flashing with Odin can lead to product code being changed, especially if the ROM you flash isn't intended for the normal product code of your device. There are various ways to restore your poduct code, look in the Samsung Galaxy S forums for suggestions on how to do this as the basic construction of the ROMs is very similar between the two devices from that point of view. Also, be aware that people with SGS devices have reported loosing their IMEI while flashing with Odin. If this happens you will end up with a WiFi only device unless you backed up your /efs folder before you flashed. There's lots of info in the SGS forums about this and it's worth a read if you are new to flashing. I haven't heard of anyone with a SGT loosing their IMEI yet but it's worth taking precautions.
Happy flashing folks!!

thanks a bunch guys, I'm now running the latest version !!
was just trying to install the latest gingerbread theme from the forums !! will let you all know how that went

hi guyz,..
im from malaysia and currently using galaxy S and galaxy sl for my wife (not tabs) but i've been request by my brother who owned the galaxy tabs to upgrade it since i had some knowledge..
currently his tabs running on 2.2 stock asia version.and i wanted to flash the latest version 2.3.3 europe edition since i saw many custom rom on it..i've download the latest firmware that is P1000DXJPE ## via samfirmware.com and could not find any pit,csc and modem file..
my question,
1. am i missing something here?
2. is it possible to flash without pit,csc and modem?
3. i know how to flash the file using pda since i've done it with my SGSL but before that i need to flash another old version firmware to used it.is it the same with galaxy tabs?

azamnecrone said:
hi guyz,..
im from malaysia and currently using galaxy S and galaxy sl for my wife (not tabs) but i've been request by my brother who owned the galaxy tabs to upgrade it since i had some knowledge..
currently his tabs running on 2.2 stock asia version.and i wanted to flash the latest version 2.3.3 europe edition since i saw many custom rom on it..i've download the latest firmware that is P1000DXJPE ## via samfirmware.com and could not find any pit,csc and modem file..
my question,
1. am i missing something here?
2. is it possible to flash without pit,csc and modem?
3. i know how to flash the file using pda since i've done it with my SGSL but before that i need to flash another old version firmware to used it.is it the same with galaxy tabs?
Click to expand...
Click to collapse
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.

boxhead72 said:
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
Click to expand...
Click to collapse
thanks dude!
so i dont need to flash stock gingerbread 2.3.3 to used this custom rom?a bit confuse here...

boxhead72 said:
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
Click to expand...
Click to collapse
Yes. Follow the instructions on the magrathea site or overcome
Use overcome instructions to instal stock GB 5. It tells you the pit and modem to use for your tab.
Then install the overcome kernel and reboot. It will root the tab and format the storage.
Then you install the Boca zip over the overcome kernel.
If you just want overcomes Rom follow their instructions. They make it simple
Sent from my GT-P1000 using XDA App

is that all??hmm,
will try donload all the files 1st,then i will try
thanks guyz for da info..
so i dont need to flash stock rom like i always do with my SGS before installing any custom rom?

Roto JME Firmware on AU OPTUS Tab?

Hi All,
Hope this is the right forum for this, but I was wondering if anyone has had any experience on loading the ROTO JME Firmware onto an Optus Tab, and if so, what were the improvements and were there any traps to watch out for considering the carrier lock?
I had a quick look through the ROTO JME Forum, and can't see much specific.
Regards,
bvd81

I have roto jme on the opus tab. One of the first things i did was remove the carrier lock (now works with three and telstra sims) search on this forum for info
I went straight from stock to the jm series firmware and its much much faster now just write down your internet and mms apn details as mine were wiped when upgrading.
Also if you use the optus apps make sure you only use roto upgrade package or it will wipe them.
Sent from my GT-P1000 using Tapatalk

Hi Ghostwalker9
Can you pease tell me how you flashed that ROTO JME to the Optus Tab?
I tried using Odin, but I guess it only recognises the Samsung Tab, so do I need the full version of clockworkmod?
Also, did you solve your optus sim problem with the JRE ROM?
Thanks
Greg

gregbull said:
Hi Ghostwalker9
Can you pease tell me how you flashed that ROTO JME to the Optus Tab?
I tried using Odin, but I guess it only recognises the Samsung Tab, so do I need the full version of clockworkmod?
Also, did you solve your optus sim problem with the JRE ROM?
Thanks
Greg
Click to expand...
Click to collapse
Did you install the usb drivers for the tab, and were you in downloading mode?
it should recognize the tab regardless of whats on it

Hi
Yep, had usb drivers installed, can access with adb. Not sure what download mode is though. Will research that one.
So when its in download mode should I use odin to flash the firmware?
Also, just so I'm clear when I say Optus Tab I mean the ZTE V9 tab that Optus has branded, not the Optus version of the Samsung Galaxy tab.
Thanks

Hey does anyone have the stock Optus (current) ROM backed up with all apn, sms, settings, if so please PM me with a link.
Thanks heaps
PEACE
Kosti

Optus ROM
Kostiz said:
Hey does anyone have the stock Optus (current) ROM backed up with all apn, sms, settings, if so please PM me with a link.
Thanks heaps
PEACE
Kosti
Click to expand...
Click to collapse
I would also appreciate such a link, as some initial glitch with Titanium backup caused me to lose some standard Optus apps prior to a Roto or Nandroid backup.
PLEASE: Take care if you try the batch option to "Integrate updates of system apps into ROM".
While I have no problems with all the great ROMs here, it would be good to go back to stock if I felt the need. Especially to finish off my initial Australian app subscription as I cannot find this app anywhere else.
Much appreciated if possible.
BTW: I am currently on Overcome v1.4.0 and like it very much. The Roto ROMs were also very good.

I'm pretty sure I've done a backup via titanium, but havent tried to restore from that, also i removed overcome 1.4 as thought i had wifi issues which when restored from OEM backup that OC1.4 performed it bricked it, so I had to use a full roto conversion which changed my modem & i assume pit as well.
Before (stock)
PDA : P1000XWJJ4
PHONE : P1000XXJID
CSC : P1000OPSJJ3
Build Time : 2010.10.16 20:35:06 KST
Changelist : 639474
Firmware 2.2
Kernel Version : 2.6.32.9
After roto rom
PDA : P1000XWJMI
PHONE : P1000XXJMA
CSC : P1000OXAJMG
Build Time : 2011.01.22 01:24:16 KST
Changelist : 869777
Hence why i want to bring it back to my OEM CSC & Modem if that's at all possible..
I cant even find the OEM ROM and Kies or Samsung Website?

Next Steps to enable Phone calls on T-Mobile Tab?

Yes, I know...the subject has been beaten to death with a wet noodle, and then beaten again. However, I just can't find an answer for this scenario specifically in each of the threads I've read (eyes bleeding now...have read em all). So, I'd greatly appreciate a hand, and please don't bash me for reaching out for the help.
(NOT asking HOW to enable phone calling...I've seen all those posts...just asking if the following will work to do the same)
Here's my current dilemna....
I'm running Overcome v1.2.0 with the Overcome Kernel included (have converted to ext4). ((shows up as Model GT-P1000 / Baseband t849uvjjb / Kernel 2.6.32.9)) I DO have the phone dialer with this Rom (if that means anything in my progression)
1. So...can I now flash a modem to enable me to make calls using my T-Mobile SIM from my Galaxy S Vibrant?
2. OR...do I need to flash a Euro Rom specifically (roto jme v4 + roto 2g modem?), and not use the Overcome Rom?
2a. Is the roto JMI v2 an upgrade over the JMI v4 firmware?
Thanks in advance for you assistance...happy to buy you a beer for the help!

You need to download the european modem.
Download it here
http://db.tt/kM2Vbwa
Download heimdall. Just Google it and download it for your respective OS.
-put ur tab in download mode
-install the drivers
-choose the modem option
-pick the file u just downloaded
-click start
-restart the tab
You will get edge and voice
From the Tab.
www.twitter.com/ayman07

That did the trick...very easy, thanks much!

WiFi won't turn on (stock non-rooted) i9505

Installed fresh stock rom via odin and now my WiFi will not turn on at all
It was working fine earlier today and now it just won't work.
Help me please.

Nevermind... Just flashed the stock firmware again and now it's working
mods please close this.

Is that the only working solution known?
I'm having the same problem and did some searching and it looks like the only way to fix it is to reflash stock ROM.