Hi,
Ive checked the forums but i cannot seem to find a thread that answers my question. Maybe this has not been asked or people have incorrectly titled their threads.
Ive just updated to the latest radio (no issues).
Changed my ROM to Chuckys GTX lite (no issues). Also used DUTTY Creme V4
I have then booted Google's android, using Darkstones 7/8/10 build of Froyo.
It boots into Android fine but upon start up i always get the message:
'sim card changed' then 'sorry! The application settings (process com.android.settings) has stopped unexpectedley. please try again'
which i then click force close
Im also having trouble finding the correct software to use USB mode to transfer my files to the phone in Android - I think i now have to use HTC Sync but HTC's site asks for a serial,.... which obviously i cannot download. I just seem to default to 'USB Debugging' which does nothing for me.
An help would be appreciated
Thanks
i also can not connect my HD2 with this build via USB...
any idea?
Currently using ChuckyDroidROM and the FroyoStone 07.08.2010 build, installed "Automount" from the Android Market, disabled "USB Debugging" and set Automount to enabled, and it works perfectly fine now, Windows XP, Windows 7 and Ubuntu 10.04 all see the microSD card and can access it perfectly
iiNFAMOUS CHRiS said:
Currently using ChuckyDroidROM and the FroyoStone 07.08.2010 build, installed "Automount" from the Android Market, disabled "USB Debugging" and set Automount to enabled, and it works perfectly fine now, Windows XP, Windows 7 and Ubuntu 10.04 all see the microSD card and can access it perfectly
Click to expand...
Click to collapse
Amazing, thank you very much, been serching for something like this for hours. You have made my day!!
has anyone else had the error in my OP, I dont know if its having any effect on the OS but its good piece of mind to know what it is.
Cheers
thanks a lot...gonna try right now...
great...it works...
now I can access my SD card, but when I paste something and then disconnect the USB cable, nothing appears in File Explorer... For example: I tried to make new folder "music"and to put there some music files. I did that, but then I couldn't find the folder... Any suggestions?
muscular said:
now I can access my SD card, but when I paste something and then disconnect the USB cable, nothing appears in File Explorer... For example: I tried to make new folder "music"and to put there some music files. I did that, but then I couldn't find the folder... Any suggestions?
Click to expand...
Click to collapse
Be careful about transferring files to your sdcard via android...
there's a reason DarkStone probably disabled it...
I was on older builds that supported this and ended up messing up the filesystem of the card... nothing a "repair without formatting" can't handle, but still takes some time to figure out...
Im running HSPL3, ChuckyROM GTX Lite, JMZ DualBoot and Android 2,1 i believe... The Desire one w. sense...
Everything works perfectly, but theres no connection trough the USB only charging.
Tried to turn op USB debugging and install Automount (No luck)
Alså tried to change the connect to pc setting fra just chargin to all of the other options... Still no luck
Anyone have any ideas?
I'm having same issue as OP.
Went from Desire v5 to Froyo darkstone (7/8), and no data connection, and same error "Sorry! The application Settings (process com.android .settings) has stopped ..etc when I try to accept the "Sim card changed " notification.
When I try to play with APN settings, it just constanlty says : Connection failed due to incorrect APN settings on Mobile Network screen.
There was a warning with this build about limited or no data, but didnt think it would not work at all, I had a cracking down rate with Desire V5, but would like to carry on running this Froyo build.
Any help?
To OP:
Just seen the following in the build thread:
Update:
a) APN settings crash, I will fix this asap.
Last edited by DarkStone1337; 8th August 2010 at 12:03 AM..
Re-EDIT!
Check this: worked for me..... http://forum.xda-developers.com/showpost.php?p=7514490&postcount=1179
Lol, I deleted the apn settings before the backup step. Lost my o2 internet now. Anyone had the issue of the mobile phone signal icon dropping every min it so. It will show full or half etc signal then the next min will show no signal bars then after another min or so full or half etc again. I can still make calls when the phone shows no signal though. This is with chucky gtx lite and darkstone latest froyo build. Same was with duty Rom also.
Another issue I've found is the screen going sort of black and white inverted and really bright. Anyone else got this if just me, I have to reboot the phone to fix. It's only happened twice though in a week.
Sent from my HTC Hd2 Android
using XDA App
I was wondering how
make GingerBread HD2 support ad-hoc connection??
wait wait................
If you're wondering how to make it so your phone can see another phone wirelessly it can't be done if the hotspot phone is trying to use ad-hoc. For example: the LG ALLY can be made into a wireless hotspot and can be tethered to another device as long as the other device can utilize ad-hoc. As far as I know, the software itself from Google doesn't have that feature implemented, so android phones can't see ad-hoc hotspots.
If you're asking if your laptop can pair up to your android phone then sure it can. Just use this: http://code.google.com/p/android-wifi-tether/
Source: http://code.google.com/p/android/issues/detail?id=82
As always, that's my interpretation. I may need additional details in the matter.
Thank you for your comment, but there are many of cynogenmod Gingerbread builds support this feature ..The main thing is that I am now comfortable no Gingerbread without support for that feature I want to know Is there a way to do that
thanks again
Hi
I'm using GPC's Pure Gingerbread on a HTC HD2 which is a 2.3.3 Android version. I tried to update from SD following the instruction posted here with no luck.
All I get is:
-- Install from sdcard...
Finding update package...
Opening update package...
Verifying update package...
E:signature verification failed
Installation aborted.
What am I doing wrong?
Regards
I have no permissions to publish to HD Mini ROM Development, published the solution here.
I have the solution to put wifi in Android 2.2 of Schlunds, the problem is in the process "htcUPCTLoader.exe" not allowed to continue with the process.
The assignment of IP must be static, do not get the IP automatically
Here I leave kernel with the new install
TESTED ONLY WITH ANDROID 2.2 Schlunds
Sorry for my bad English
hey thanks man
maybe u will find a fix for derefas sd card fix too?
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
codiak said:
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
Click to expand...
Click to collapse
Or the Windows Mobile rom used?
After trying the Android images, I had a lot of GPS issues under WinMo (not working anymore). At the end it was fixed, but could it be that the WinMo roms can be of influence on Android?
MobileMini said:
Or the Windows Mobile rom used?
After trying the Android images, I had a lot of GPS issues under WinMo (not working anymore). At the end it was fixed, but could it be that the WinMo roms can be of influence on Android?
Click to expand...
Click to collapse
I start to believe is this...i'm gonna use use Stock ROM and i will keep you posted if it will be any changes
nsourm has a dualbootloader in his ROM
Maybe its better to boot Android not from "within" WinMo.
Can someone test that?
codiak said:
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
Click to expand...
Click to collapse
In my case the prob was "htcUPCTLoader.exe" it was not allowing deamon to start..so i had to kill it and then run the run.bat file....
Can u try it this way..??..connecting the Mini with pc..running run.bat...after that killing htcUPCTLoader.exe process in task manager..and then running run.bat file again..??.... it might work....if not..then there's no harm done
I dont need to try. The kernel module file (*.ko) in the image is updated. So the problem (at least for me) is not adb push. must be something different.
Codiak, your not alone. I am also not able to turn WiFi on. Do you get Error when you go to the settings to turn it on? It's like its not picking up the WiFi on the mobile.
The only thing I changed was adding in the run.bat
Code:
taskkill / F / IM htcUPCTLoader.exe
On beginning of everything, to finish the process before starting the adb. I haven't touched anything of the files zImage and adb.exe
http://www.megaupload.com/?d=3NKI5Z0U
This is my system (android 2.2) running Wifi.
Sak_1 said:
I have no permissions to publish to HD Mini ROM Development, published the solution here.
I have the solution to put wifi in Android 2.2 of Schlunds, the problem is in the process "htcUPCTLoader.exe" not allowed to continue with the process.
The assignment of IP must be static, do not get the IP automatically
Here I leave kernel with the new install
TESTED ONLY WITH ANDROID 2.2 Schlunds
Sorry for my bad English
Click to expand...
Click to collapse
Thank you for all you've done! Unfortunately,it didn't work on my mini. (my windows rom is 1.38). Still,thank you!
JAntrobus said:
Codiak, your not alone. I am also not able to turn WiFi on. Do you get Error when you go to the settings to turn it on? It's like its not picking up the WiFi on the mobile.
Click to expand...
Click to collapse
Its the same behavior as the fixed module was not installed.
If you tab Wifi, it just grays out and do nothing. No error message.
See, im on the standard ROM. And no matter what I try, I get the same.
Ok, so it not seem to be WiMo ROM related. I use a custom one.
So my last idea is the bootloader (haret)...
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
codiak said:
Ok, so it not seem to be WiMo ROM related. I use a custom one.
So my last idea is the bootloader (haret)...
Click to expand...
Click to collapse
i dont think anyone touched haret after cotulla patched it for mini
seppe82 said:
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
Click to expand...
Click to collapse
It worked, mine no longer displays as error. But I dont have any WiFi's to connect to as im also at work. But it looks much more promising.
Just we need to start looking into getting the battery reconised by Android, having to go into Windows to charge my phone.
seppe82 said:
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
Click to expand...
Click to collapse
Dont work for me My Wifi in WiMo was allready off. I changed it to on and booted Android = no luck. Rebooted to WiMo and disabled Wifi and booted Android again = no luck.
Did you get a error message before while switchig wifi on in android? I do not get a message. it just grays out
codiak said:
Dont work for me My Wifi in WiMo was allready off. I changed it to on and booted Android = no luck. Rebooted to WiMo and disabled Wifi and booted Android again = no luck.
Did you get a error message before while switchig wifi on in android? I do not get a message. it just grays out
Click to expand...
Click to collapse
Unfortunately there wasn't any precise error message. As you said it only was greyed out with "Fehler" (error) written below the wlan switch. It's strange that there still isn't any solution working for everyone.
For me, no "Fehler" came up. Just grayed out. Same behavior like I never applied the patched module. But i can see the patched .ko file in the phone
I´m using tzacapaca patched ext2 file that works for him...
Hi All,
I have recently installed the DFT ROM om my HD2, I want to sync my contacts using my Windows Live account.
I got this message every time I tried to access the network data connection:
"can't connect
We're having a problem connecting to windows live. make sure you have good reception. if you do, the problem may be on the other end. wait a little while and try again"
and if I tried to access gmail:
"Not updated We're having a problem connecting to m.google.com. try again later.
Error Code: 80072FA8"
I tried both data connection and 3G connection.
does this ROM have such problems? what is the best ROM to install instead of my current ROM?
All the other roms are directly based off the original DFT rom. Only major difference would be the chevron is built in. Was fantastic for me since I had all sort of connect problems with chevron. I would use a rom that has that built in.
As far as data goes you would probably have to enter your apn. I had to. Or an easier way would be to load a rom that had chevron built in and download HTC Connection Setup from the market or sideload it and that should straighten that out.
Im running RAFDROID HD 4.2 , and my 3g works fine but when I go to turn on wifi it says error and wont look for connections. Any ideas ?
Can you try and reflash the ROM? I'm running it also and the wifi is working great.
I am use rafdroids builds for more then 6 month, SD and NAND builds, without any problems with wifi.
Check your wifi router settings. In the most of the androidbuilds the MAC adress is changed and is not the same as like on winmo.
nafets.f